I have a parameters.ini file, such as:
[parameters.ini]
database_user = user
database_version = 20110611142248
I want to read in and use the database version specified in the parameters.ini file from within a bash shell script so I can process it.
#!/bin/sh
# Need to get database version from parameters.ini file to use in script
php app/console doctrine:migrations:migrate $DATABASE_VERSION
How would I do this?
How about grepping for that line then using awk
version=$(awk -F "=" '/database_version/ {print $2}' parameters.ini)
You can use bash native parser to interpret ini values, by:
$ source <(grep = file.ini)
Sample file:
[section-a]
var1=value1
var2=value2
IPS=( "1.2.3.4" "1.2.3.5" )
To access variables, you simply printing them: echo $var1. You may also use arrays as shown above (echo ${IPS[#]}).
If you only want a single value just grep for it:
source <(grep var1 file.ini)
For the demo, check this recording at asciinema.
It is simple as you don't need for any external library to parse the data, but it comes with some disadvantages. For example:
If you have spaces between = (variable name and value), then you've to trim the spaces first, e.g.
$ source <(grep = file.ini | sed 's/ *= */=/g')
Or if you don't care about the spaces (including in the middle), use:
$ source <(grep = file.ini | tr -d ' ')
To support ; comments, replace them with #:
$ sed "s/;/#/g" foo.ini | source /dev/stdin
The sections aren't supported (e.g. if you've [section-name], then you've to filter it out as shown above, e.g. grep =), the same for other unexpected errors.
If you need to read specific value under specific section, use grep -A, sed, awk or ex).
E.g.
source <(grep = <(grep -A5 '\[section-b\]' file.ini))
Note: Where -A5 is the number of rows to read in the section. Replace source with cat to debug.
If you've got any parsing errors, ignore them by adding: 2>/dev/null
See also:
How to parse and convert ini file into bash array variables? at serverfault SE
Are there any tools for modifying INI style files from shell script
Sed one-liner, that takes sections into account. Example file:
[section1]
param1=123
param2=345
param3=678
[section2]
param1=abc
param2=def
param3=ghi
[section3]
param1=000
param2=111
param3=222
Say you want param2 from section2. Run the following:
sed -nr "/^\[section2\]/ { :l /^param2[ ]*=/ { s/[^=]*=[ ]*//; p; q;}; n; b l;}" ./file.ini
will give you
def
Bash does not provide a parser for these files. Obviously you can use an awk command or a couple of sed calls, but if you are bash-priest and don't want to use any other shell, then you can try the following obscure code:
#!/usr/bin/env bash
cfg_parser ()
{
ini="$(<$1)" # read the file
ini="${ini//[/\[}" # escape [
ini="${ini//]/\]}" # escape ]
IFS=$'\n' && ini=( ${ini} ) # convert to line-array
ini=( ${ini[*]//;*/} ) # remove comments with ;
ini=( ${ini[*]/\ =/=} ) # remove tabs before =
ini=( ${ini[*]/=\ /=} ) # remove tabs after =
ini=( ${ini[*]/\ =\ /=} ) # remove anything with a space around =
ini=( ${ini[*]/#\\[/\}$'\n'cfg.section.} ) # set section prefix
ini=( ${ini[*]/%\\]/ \(} ) # convert text2function (1)
ini=( ${ini[*]/=/=\( } ) # convert item to array
ini=( ${ini[*]/%/ \)} ) # close array parenthesis
ini=( ${ini[*]/%\\ \)/ \\} ) # the multiline trick
ini=( ${ini[*]/%\( \)/\(\) \{} ) # convert text2function (2)
ini=( ${ini[*]/%\} \)/\}} ) # remove extra parenthesis
ini[0]="" # remove first element
ini[${#ini[*]} + 1]='}' # add the last brace
eval "$(echo "${ini[*]}")" # eval the result
}
cfg_writer ()
{
IFS=' '$'\n'
fun="$(declare -F)"
fun="${fun//declare -f/}"
for f in $fun; do
[ "${f#cfg.section}" == "${f}" ] && continue
item="$(declare -f ${f})"
item="${item##*\{}"
item="${item%\}}"
item="${item//=*;/}"
vars="${item//=*/}"
eval $f
echo "[${f#cfg.section.}]"
for var in $vars; do
echo $var=\"${!var}\"
done
done
}
Usage:
# parse the config file called 'myfile.ini', with the following
# contents::
# [sec2]
# var2='something'
cfg.parser 'myfile.ini'
# enable section called 'sec2' (in the file [sec2]) for reading
cfg.section.sec2
# read the content of the variable called 'var2' (in the file
# var2=XXX). If your var2 is an array, then you can use
# ${var[index]}
echo "$var2"
Bash ini-parser can be found at The Old School DevOps blog site.
Just include your .ini file into bash body:
File example.ini:
DBNAME=test
DBUSER=scott
DBPASSWORD=tiger
File example.sh
#!/bin/bash
#Including .ini file
. example.ini
#Test
echo "${DBNAME} ${DBUSER} ${DBPASSWORD}"
All of the solutions I've seen so far also hit on commented out lines. This one didn't, if the comment code is ;:
awk -F '=' '{if (! ($0 ~ /^;/) && $0 ~ /database_version/) print $2}' file.ini
You may use crudini tool to get ini values, e.g.:
DATABASE_VERSION=$(crudini --get parameters.ini '' database_version)
one of more possible solutions
dbver=$(sed -n 's/.*database_version *= *\([^ ]*.*\)/\1/p' < parameters.ini)
echo $dbver
Display the value of my_key in an ini-style my_file:
sed -n -e 's/^\s*my_key\s*=\s*//p' my_file
-n -- do not print anything by default
-e -- execute the expression
s/PATTERN//p -- display anything following this pattern
In the pattern:
^ -- pattern begins at the beginning of the line
\s -- whitespace character
* -- zero or many (whitespace characters)
Example:
$ cat my_file
# Example INI file
something = foo
my_key = bar
not_my_key = baz
my_key_2 = bing
$ sed -n -e 's/^\s*my_key\s*=\s*//p' my_file
bar
So:
Find a pattern where the line begins with zero or many whitespace characters,
followed by the string my_key, followed by zero or many whitespace characters, an equal sign, then zero or many whitespace characters again. Display the rest of the content on that line following that pattern.
Similar to the other Python answers, you can do this using the -c flag to execute a sequence of Python statements given on the command line:
$ python3 -c "import configparser; c = configparser.ConfigParser(); c.read('parameters.ini'); print(c['parameters.ini']['database_version'])"
20110611142248
This has the advantage of requiring only the Python standard library and the advantage of not writing a separate script file.
Or use a here document for better readability, thusly:
#!/bin/bash
python << EOI
import configparser
c = configparser.ConfigParser()
c.read('params.txt')
print c['chassis']['serialNumber']
EOI
serialNumber=$(python << EOI
import configparser
c = configparser.ConfigParser()
c.read('params.txt')
print c['chassis']['serialNumber']
EOI
)
echo $serialNumber
sed
You can use sed to parse the ini configuration file, especially when you've section names like:
# last modified 1 April 2001 by John Doe
[owner]
name=John Doe
organization=Acme Widgets Inc.
[database]
# use IP address in case network name resolution is not working
server=192.0.2.62
port=143
file=payroll.dat
so you can use the following sed script to parse above data:
# Configuration bindings found outside any section are given to
# to the default section.
1 {
x
s/^/default/
x
}
# Lines starting with a #-character are comments.
/#/n
# Sections are unpacked and stored in the hold space.
/\[/ {
s/\[\(.*\)\]/\1/
x
b
}
# Bindings are unpacked and decorated with the section
# they belong to, before being printed.
/=/ {
s/^[[:space:]]*//
s/[[:space:]]*=[[:space:]]*/|/
G
s/\(.*\)\n\(.*\)/\2|\1/
p
}
this will convert the ini data into this flat format:
owner|name|John Doe
owner|organization|Acme Widgets Inc.
database|server|192.0.2.62
database|port|143
database|file|payroll.dat
so it'll be easier to parse using sed, awk or read by having section names in every line.
Credits & source: Configuration files for shell scripts, Michael Grünewald
Alternatively, you can use this project: chilladx/config-parser, a configuration parser using sed.
For people (like me) looking to read INI files from shell scripts (read shell, not bash) - I've knocked up the a little helper library which tries to do exactly that:
https://github.com/wallyhall/shini (MIT license, do with it as you please. I've linked above including it inline as the code is quite lengthy.)
It's somewhat more "complicated" than the simple sed lines suggested above - but works on a very similar basis.
Function reads in a file line-by-line - looking for section markers ([section]) and key/value declarations (key=value).
Ultimately you get a callback to your own function - section, key and value.
Here is my version, which parses sections and populates a global associative array g_iniProperties with it.
Note that this works only with bash v4.2 and higher.
function parseIniFile() { #accepts the name of the file to parse as argument ($1)
#declare syntax below (-gA) only works with bash 4.2 and higher
unset g_iniProperties
declare -gA g_iniProperties
currentSection=""
while read -r line
do
if [[ $line = [* ]] ; then
if [[ $line = [* ]] ; then
currentSection=$(echo $line | sed -e 's/\r//g' | tr -d "[]")
fi
else
if [[ $line = *=* ]] ; then
cleanLine=$(echo $line | sed -e 's/\r//g')
key=$currentSection.$(echo $cleanLine | awk -F: '{ st = index($0,"=");print substr($0,0,st-1)}')
value=$(echo $cleanLine | awk -F: '{ st = index($0,"=");print substr($0,st+1)}')
g_iniProperties[$key]=$value
fi
fi;
done < $1
}
And here is a sample code using the function above:
parseIniFile "/path/to/myFile.ini"
for key in "${!g_iniProperties[#]}"; do
echo "Found key/value $key = ${g_iniProperties[$key]}"
done
Yet another implementation using awk with a little more flexibility.
function parse_ini() {
cat /dev/stdin | awk -v section="$1" -v key="$2" '
BEGIN {
if (length(key) > 0) { params=2 }
else if (length(section) > 0) { params=1 }
else { params=0 }
}
match($0,/#/) { next }
match($0,/^\[(.+)\]$/){
current=substr($0, RSTART+1, RLENGTH-2)
found=current==section
if (params==0) { print current }
}
match($0,/(.+)=(.+)/) {
if (found) {
if (params==2 && key==$1) { print $3 }
if (params==1) { printf "%s=%s\n",$1,$3 }
}
}'
}
You can use calling passing between 0 and 2 params:
cat myfile1.ini myfile2.ini | parse_ini # List section names
cat myfile1.ini myfile2.ini | parse_ini 'my-section' # Prints keys and values from a section
cat myfile1.ini myfile2.ini | parse_ini 'my-section' 'my-key' # Print a single value
complex simplicity
ini file
test.ini
[section1]
name1=value1
name2=value2
[section2]
name1=value_1
name2 = value_2
bash script with read and execute
/bin/parseini
#!/bin/bash
set +a
while read p; do
reSec='^\[(.*)\]$'
#reNV='[ ]*([^ ]*)+[ ]*=(.*)' #Remove only spaces around name
reNV='[ ]*([^ ]*)+[ ]*=[ ]*(.*)' #Remove spaces around name and spaces before value
if [[ $p =~ $reSec ]]; then
section=${BASH_REMATCH[1]}
elif [[ $p =~ $reNV ]]; then
sNm=${section}_${BASH_REMATCH[1]}
sVa=${BASH_REMATCH[2]}
set -a
eval "$(echo "$sNm"=\""$sVa"\")"
set +a
fi
done < $1
then in another script I source the results of the command and can use any variables within
test.sh
#!/bin/bash
source parseini test.ini
echo $section2_name2
finally from command line the output is thus
# ./test.sh
value_2
Some of the answers don't respect comments. Some don't respect sections. Some recognize only one syntax (only ":" or only "="). Some Python answers fail on my machine because of differing captialization or failing to import the sys module. All are a bit too terse for me.
So I wrote my own, and if you have a modern Python, you can probably call this from your Bash shell. It has the advantage of adhering to some of the common Python coding conventions, and even provides sensible error messages and help. To use it, name it something like myconfig.py (do NOT call it configparser.py or it may try to import itself,) make it executable, and call it like
value=$(myconfig.py something.ini sectionname value)
Here's my code for Python 3.5 on Linux:
#!/usr/bin/env python3
# Last Modified: Thu Aug 3 13:58:50 PDT 2017
"""A program that Bash can call to parse an .ini file"""
import sys
import configparser
import argparse
if __name__ == '__main__':
parser = argparse.ArgumentParser(description="A program that Bash can call to parse an .ini file")
parser.add_argument("inifile", help="name of the .ini file")
parser.add_argument("section", help="name of the section in the .ini file")
parser.add_argument("itemname", help="name of the desired value")
args = parser.parse_args()
config = configparser.ConfigParser()
config.read(args.inifile)
print(config.get(args.section, args.itemname))
I wrote a quick and easy python script to include in my bash script.
For example, your ini file is called food.ini
and in the file you can have some sections and some lines:
[FRUIT]
Oranges = 14
Apples = 6
Copy this small 6 line Python script and save it as configparser.py
#!/usr/bin/python
import configparser
import sys
config = configparser.ConfigParser()
config.read(sys.argv[1])
print config.get(sys.argv[2],sys.argv[3])
Now, in your bash script you could do this for example.
OrangeQty=$(python configparser.py food.ini FRUIT Oranges)
or
ApplesQty=$(python configparser.py food.ini FRUIT Apples)
echo $ApplesQty
This presupposes:
you have Python installed
you have the configparser library installed (this should come with a std python installation)
Hope it helps
:¬)
The explanation to the answer for the one-liner sed.
[section1]
param1=123
param2=345
param3=678
[section2]
param1=abc
param2=def
param3=ghi
[section3]
param1=000
param2=111
param3=222
sed -nr "/^\[section2\]/ { :l /^\s*[^#].*/ p; n; /^\[/ q; b l; }" ./file.ini
To understand, it will be easier to format the line like this:
sed -nr "
# start processing when we found the word \"section2\"
/^\[section2\]/ { #the set of commands inside { } will be executed
#create a label \"l\" (https://www.grymoire.com/Unix/Sed.html#uh-58)
:l /^\s*[^#].*/ p;
# move on to the next line. For the first run it is the \"param1=abc\"
n;
# check if this line is beginning of new section. If yes - then exit.
/^\[/ q
#otherwise jump to the label \"l\"
b l
}
" file.ini
This script will get parameters as follow :
meaning that if your ini has :
pars_ini.ksh < path to ini file > < name of Sector in Ini file > < the name in name=value to return >
eg. how to call it :
[ environment ]
a=x
[ DataBase_Sector ]
DSN = something
Then calling :
pars_ini.ksh /users/bubu_user/parameters.ini DataBase_Sector DSN
this will retrieve the following "something"
the script "pars_ini.ksh" :
\#!/bin/ksh
\#INI_FILE=path/to/file.ini
\#INI_SECTION=TheSection
\# BEGIN parse-ini-file.sh
\# SET UP THE MINIMUM VARS FIRST
alias sed=/usr/local/bin/sed
INI_FILE=$1
INI_SECTION=$2
INI_NAME=$3
INI_VALUE=""
eval `sed -e 's/[[:space:]]*\=[[:space:]]*/=/g' \
-e 's/;.*$//' \
-e 's/[[:space:]]*$//' \
-e 's/^[[:space:]]*//' \
-e "s/^\(.*\)=\([^\"']*\)$/\1=\"\2\"/" \
< $INI_FILE \
| sed -n -e "/^\[$INI_SECTION\]/,/^\s*\[/{/^[^;].*\=.*/p;}"`
TEMP_VALUE=`echo "$"$INI_NAME`
echo `eval echo $TEMP_VALUE`
This implementation uses awk and has the following advantages:
Will only return the first matching entry
Ignores lines that start with a ;
Trims leading and trailing whitespace, but not internal whitespace
Formatted version:
awk -F '=' '/^\s*database_version\s*=/ {
sub(/^ +/, "", $2);
sub(/ +$/, "", $2);
print $2;
exit;
}' parameters.ini
One-liner:
awk -F '=' '/^\s*database_version\s*=/ { sub(/^ +/, "", $2); sub(/ +$/, "", $2); print $2; exit; }' parameters.ini
You can use a CSV parser xsv as parsing INI data.
cargo install xsv
$ cat /etc/*release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
$ xsv select -d "=" - <<< "$( cat /etc/*release )" | xsv search --no-headers --select 1 "DISTRIB_CODENAME" | xsv select 2
xenial
or from a file.
$ xsv select -d "=" - file.ini | xsv search --no-headers --select 1 "DISTRIB_CODENAME" | xsv select 2
My version of the one-liner
#!/bin/bash
#Reader for MS Windows 3.1 Ini-files
#Usage: inireader.sh
# e.g.: inireader.sh win.ini ERRORS DISABLE
# would return value "no" from the section of win.ini
#[ERRORS]
#DISABLE=no
INIFILE=$1
SECTION=$2
ITEM=$3
cat $INIFILE | sed -n /^\[$SECTION\]/,/^\[.*\]/p | grep "^[:space:]*$ITEM[:space:]*=" | sed s/.*=[:space:]*//
Just finished writing my own parser. I tried to use various parser found here, none seems to work with both ksh93 (AIX) and bash (Linux).
It's old programming style - parsing line by line. Pretty fast since it used few external commands. A bit slower because of all the eval required for dynamic name of the array.
The ini support 3 special syntaxs:
includefile=ini file -->
Load an additionnal ini file. Useful for splitting ini in multiple files, or re-use some piece of configuration
includedir=directory -->
Same as includefile, but include a complete directory
includesection=section -->
Copy an existing section to the current section.
I used all thoses syntax to have pretty complex, re-usable ini file. Useful to install products when installing a new OS - we do that a lot.
Values can be accessed with ${ini[$section.$item]}. The array MUST be defined before calling this.
Have fun. Hope it's useful for someone else!
function Show_Debug {
[[ $DEBUG = YES ]] && echo "DEBUG $#"
}
function Fatal {
echo "$#. Script aborted"
exit 2
}
#-------------------------------------------------------------------------------
# This function load an ini file in the array "ini"
# The "ini" array must be defined in the calling program (typeset -A ini)
#
# It could be any array name, the default array name is "ini".
#
# There is heavy usage of "eval" since ksh and bash do not support
# reference variable. The name of the ini is passed as variable, and must
# be "eval" at run-time to work. Very specific syntax was used and must be
# understood before making any modifications.
#
# It complexify greatly the program, but add flexibility.
#-------------------------------------------------------------------------------
function Load_Ini {
Show_Debug "$0($#)"
typeset ini_file="$1"
# Name of the array to fill. By default, it's "ini"
typeset ini_array_name="${2:-ini}"
typeset section variable value line my_section file subsection value_array include_directory all_index index sections pre_parse
typeset LF="
"
if [[ ! -s $ini_file ]]; then
Fatal "The ini file is empty or absent in $0 [$ini_file]"
fi
include_directory=$(dirname $ini_file)
include_directory=${include_directory:-$(pwd)}
Show_Debug "include_directory=$include_directory"
section=""
# Since this code support both bash and ksh93, you cannot use
# the syntax "echo xyz|while read line". bash doesn't work like
# that.
# It forces the use of "<<<", introduced in bash and ksh93.
Show_Debug "Reading file $ini_file and putting the results in array $ini_array_name"
pre_parse="$(sed 's/^ *//g;s/#.*//g;s/ *$//g' <$ini_file | egrep -v '^$')"
while read line; do
if [[ ${line:0:1} = "[" ]]; then # Is the line starting with "["?
# Replace [section_name] to section_name by removing the first and last character
section="${line:1}"
section="${section%\]}"
eval "sections=\${$ini_array_name[sections_list]}"
sections="$sections${sections:+ }$section"
eval "$ini_array_name[sections_list]=\"$sections\""
Show_Debug "$ini_array_name[sections_list]=\"$sections\""
eval "$ini_array_name[$section.exist]=YES"
Show_Debug "$ini_array_name[$section.exist]='YES'"
else
variable=${line%%=*} # content before the =
value=${line#*=} # content after the =
if [[ $variable = includefile ]]; then
# Include a single file
Load_Ini "$include_directory/$value" "$ini_array_name"
continue
elif [[ $variable = includedir ]]; then
# Include a directory
# If the value doesn't start with a /, add the calculated include_directory
if [[ $value != /* ]]; then
value="$include_directory/$value"
fi
# go thru each file
for file in $(ls $value/*.ini 2>/dev/null); do
if [[ $file != *.ini ]]; then continue; fi
# Load a single file
Load_Ini "$file" "$ini_array_name"
done
continue
elif [[ $variable = includesection ]]; then
# Copy an existing section into the current section
eval "all_index=\"\${!$ini_array_name[#]}\""
# It's not necessarily fast. Need to go thru all the array
for index in $all_index; do
# Only if it is the requested section
if [[ $index = $value.* ]]; then
# Evaluate the subsection [section.subsection] --> subsection
subsection=${index#*.}
# Get the current value (source section)
eval "value_array=\"\${$ini_array_name[$index]}\""
# Assign the value to the current section
# The $value_array must be resolved on the second pass of the eval, so make sure the
# first pass doesn't resolve it (\$value_array instead of $value_array).
# It must be evaluated on the second pass in case there is special character like $1,
# or ' or " in it (code).
eval "$ini_array_name[$section.$subsection]=\"\$value_array\""
Show_Debug "$ini_array_name[$section.$subsection]=\"$value_array\""
fi
done
fi
# Add the value to the array
eval "current_value=\"\${$ini_array_name[$section.$variable]}\""
# If there's already something for this field, add it with the current
# content separated by a LF (line_feed)
new_value="$current_value${current_value:+$LF}$value"
# Assign the content
# The $new_value must be resolved on the second pass of the eval, so make sure the
# first pass doesn't resolve it (\$new_value instead of $new_value).
# It must be evaluated on the second pass in case there is special character like $1,
# or ' or " in it (code).
eval "$ini_array_name[$section.$variable]=\"\$new_value\""
Show_Debug "$ini_array_name[$section.$variable]=\"$new_value\""
fi
done <<< "$pre_parse"
Show_Debug "exit $0($#)\n"
}
When I use a password in base64, I put the separator ":" because the base64 string may has "=". For example (I use ksh):
> echo "Abc123" | base64
QWJjMTIzCg==
In parameters.ini put the line pass:QWJjMTIzCg==, and finally:
> PASS=`awk -F":" '/pass/ {print $2 }' parameters.ini | base64 --decode`
> echo "$PASS"
Abc123
If the line has spaces like "pass : QWJjMTIzCg== " add | tr -d ' ' to trim them:
> PASS=`awk -F":" '/pass/ {print $2 }' parameters.ini | tr -d ' ' | base64 --decode`
> echo "[$PASS]"
[Abc123]
This uses the system perl and clean regular expressions:
cat parameters.ini | perl -0777ne 'print "$1" if /\[\s*parameters\.ini\s*\][\s\S]*?\sdatabase_version\s*=\s*(.*)/'
The answer of "Karen Gabrielyan" among another answers was the best but in some environments we dont have awk, like typical busybox, i changed the answer by below code.
trim()
{
local trimmed="$1"
# Strip leading space.
trimmed="${trimmed## }"
# Strip trailing space.
trimmed="${trimmed%% }"
echo "$trimmed"
}
function parseIniFile() { #accepts the name of the file to parse as argument ($1)
#declare syntax below (-gA) only works with bash 4.2 and higher
unset g_iniProperties
declare -gA g_iniProperties
currentSection=""
while read -r line
do
if [[ $line = [* ]] ; then
if [[ $line = [* ]] ; then
currentSection=$(echo $line | sed -e 's/\r//g' | tr -d "[]")
fi
else
if [[ $line = *=* ]] ; then
cleanLine=$(echo $line | sed -e 's/\r//g')
key=$(trim $currentSection.$(echo $cleanLine | cut -d'=' -f1'))
value=$(trim $(echo $cleanLine | cut -d'=' -f2))
g_iniProperties[$key]=$value
fi
fi;
done < $1
}
If Python is available, the following will read all the sections, keys and values and save them in variables with their names following the format "[section]_[key]". Python can read .ini files properly, so we make use of it.
#!/bin/bash
eval $(python3 << EOP
from configparser import SafeConfigParser
config = SafeConfigParser()
config.read("config.ini"))
for section in config.sections():
for (key, val) in config.items(section):
print(section + "_" + key + "=\"" + val + "\"")
EOP
)
echo "Environment_type: ${Environment_type}"
echo "Environment_name: ${Environment_name}"
config.ini
[Environment]
type = DEV
name = D01
If using sections, this will do the job :
Example raw output :
$ ./settings
[section]
SETTING_ONE=this is setting one
SETTING_TWO=This is the second setting
ANOTHER_SETTING=This is another setting
Regexp parsing :
$ ./settings | sed -n -E "/^\[.*\]/{s/\[(.*)\]/\1/;h;n;};/^[a-zA-Z]/{s/#.*//;G;s/([^ ]*) *= *(.*)\n(.*)/\3_\1='\2'/;p;}"
section_SETTING_ONE='this is setting one'
section_SETTING_TWO='This is the second setting'
section_ANOTHER_SETTING='This is another setting'
Now all together :
$ eval "$(./settings | sed -n -E "/^\[.*\]/{s/\[(.*)\]/\1/;h;n;};/^[a-zA-Z]/{s/#.*//;G;s/([^ ]*) *= *(.*)\n(.*)/\3_\1='\2'/;p;}")"
$ echo $section_SETTING_TWO
This is the second setting
I have nice one-liner (assuimng you have php and jq installed):
cat file.ini | php -r "echo json_encode(parse_ini_string(file_get_contents('php://stdin'), true, INI_SCANNER_RAW));" | jq '.section.key'
This thread does not have enough solutions to choose from, thus here my solution, it does not require tools like sed or awk :
grep '^\[section\]' -A 999 config.ini | tail -n +2 | grep -B 999 '^\[' | head -n -1 | grep '^key' | cut -d '=' -f 2
If your are to expect sections with more than 999 lines, feel free to adapt the example above. Note that you may want to trim the resulting value, to remove spaces or a comment string after the value. Remove the ^ if you need to match keys that do not start at the beginning of the line, as in the example of the question. Better, match explicitly for white spaces and tabs, in such a case.
If you have multiple values in a given section you want to read, but want to avoid reading the file multiple times:
CONFIG_SECTION=$(grep '^\[section\]' -A 999 config.ini | tail -n +2 | grep -B 999 '^\[' | head -n -1)
KEY1=$(echo ${CONFIG_SECTION} | tr ' ' '\n' | grep key1 | cut -d '=' -f 2)
echo "KEY1=${KEY1}"
KEY2=$(echo ${CONFIG_SECTION} | tr ' ' '\n' | grep key2 | cut -d '=' -f 2)
echo "KEY2=${KEY2}"
For the command:
cat <file_name>.asc | head -1
Output:
10/30/2006,19:41:58,1.4871,1,E
I wanted to append commas to this line to maintain field consistency.
So I tried various combinations like issuing,
Command : echo cat <file_name>.asc | head -1,,,
Output : ,,,30/2006,19:41:58,1.4871,1,E
Command : echo cat <file_name>.asc | head -1,
Output : ,0/30/2006,19:41:58,1.4871,1,E
Command : echo cat <file_name>.asc | head -1",,,"
Output : ,,,30/2006,19:41:58,1.4871,1,E
Command : chk=$(echo cat <file_name>.asc | head -1)
echo ${chk},,,
Output : ,,,30/2006,19:41:58,1.4871,1,E
But my expected output is very simple,
10/30/2006,19:41:58,1.4871,1,E,,,
Actually my logic is to open a file with CAT and do a while operation on each line to check the data and append comma wherever needed and write the output to another file.
If I understood correctly, you want do this conversion:
10/30/2006,19:41:58,1.4871,1,E --> 10/30/2006,19:41:58,1.4871,1,E,,,
If so, then you should use sed util:
cat <file_name>.asc | sed -e 's/$/,,,/' > output_file
echo `head -n 1 cat.asc`,,,
If you need this in a variable, it goes like this:
X=`head -n 1 cat.asc`,,,
This answers the question which you asked. However, you also mention that you want to process a whole file and do some adjustment for each line. In this case, I don't see how this approach will help....
This question already has answers here:
BASH extract value after string in variable Not file [duplicate]
(2 answers)
Closed last year.
I need to extract a number from the output of a command: cmd. The output is type: 1000
So my question is how to execute the command, store its output in a variable and extract 1000 in a shell script. Also how do you store the extracted string in a variable?
This question has been answered in pieces here before, it would be something like this:
line=$(sed -n '2p' myfile)
echo "$line"
if [ `echo $line || grep 'type: 1000' ` ] then;
echo "It's there!";
fi;
Store output of sed into a variable
String contains in Bash
EDIT: sed is very limited, you would need to use bash, perl or awk for what you need.
This is a typical use case for grep:
output=$(cmd | grep -o '[0-9]\+')
You can write the output of a command or even a pipeline of commands into a shell variable using so called command substitution:
variable=$(cmd);
In comments it appeared that the output of cmd contains more lines than the type : 1000. In this case I would suggest sed:
output=$(cmd | sed -n 's/type : \([0-9]\+\)/\1/p;q')
You tagged your question as sed but your question description does not restrict other tools, so here's a solution using awk.
output = `cmd | awk -F':' '/type: [0-9]+/{print $2}'`
Alternatively, you can use the newer $( ) syntax. Some find the newer syntax preferable and it can be conveniently nested, without the need for escaping backtics.
output = $(cmd | awk -F':' '/type: [0-9]+/{print $2}')
If the output is rigidly restricted to "type: " followed by a number, you can just use cut.
var=$(echo 'type: 1000' | cut -f 2 -d ' ')
Obviously you'll have to pipe the output of your command to cut, I'm using echo as a demo.
In addition, I'd use grep and then cut if the string you are searching is more complex. If we assume there can be all kind of numbers in the text, but only one occurrence of "type: " followed by a number, you can use the command:
>> var=$(echo "hello 12 type: 1000 foo 1001" | grep -oE "type: [0-9]+" | cut -f 2 -d ' ')
>> echo $var
1000
You can use the | operator to send the output of one command to another, like so:
echo " 1\n 2\n 3\n" | grep "2"
This sends the string " 1\n 2\n 3\n" to the grep command, which will search for the line containing 2. It sound like you might want to do something like:
cmd | grep "type"
Here is a plain sed solution that uses a regualar expression to find the number in your string:
cmd | sed 's/^.*type: \([0-9]\+\)/\1/g'
^ means from the start
.* can be any character (also none)
\([0-9]\+\) are numbers (minimum one character)
\1 means it takes the first pattern it finds (and only in this case) and uses it as replacement for the whole string
How to I concatenate stdin to a string, like this?
echo "input" | COMMAND "string"
and get
inputstring
A bit hacky, but this might be the shortest way to do what you asked in the question (use a pipe to accept stdout from echo "input" as stdin to another process / command:
echo "input" | awk '{print $1"string"}'
Output:
inputstring
What task are you exactly trying to accomplish? More context can get you more direction on a better solution.
Update - responding to comment:
#NoamRoss
The more idiomatic way of doing what you want is then:
echo 'http://dx.doi.org/'"$(pbpaste)"
The $(...) syntax is called command substitution. In short, it executes the commands enclosed in a new subshell, and substitutes the its stdout output to where the $(...) was invoked in the parent shell. So you would get, in effect:
echo 'http://dx.doi.org/'"rsif.2012.0125"
use cat - to read from stdin, and put it in $() to throw away the trailing newline
echo input | COMMAND "$(cat -)string"
However why don't you drop the pipe and grab the output of the left side in a command substitution:
COMMAND "$(echo input)string"
I'm often using pipes, so this tends to be an easy way to prefix and suffix stdin:
echo -n "my standard in" | cat <(echo -n "prefix... ") - <(echo " ...suffix")
prefix... my standard in ...suffix
There are some ways of accomplish this, i personally think the best is:
echo input | while read line; do echo $line string; done
Another can be by substituting "$" (end of line character) with "string" in a sed command:
echo input | sed "s/$/ string/g"
Why i prefer the former? Because it concatenates a string to stdin instantly, for example with the following command:
(echo input_one ;sleep 5; echo input_two ) | while read line; do echo $line string; done
you get immediatly the first output:
input_one string
and then after 5 seconds you get the other echo:
input_two string
On the other hand using "sed" first it performs all the content of the parenthesis and then it gives it to "sed", so the command
(echo input_one ;sleep 5; echo input_two ) | sed "s/$/ string/g"
will output both the lines
input_one string
input_two string
after 5 seconds.
This can be very useful in cases you are performing calls to functions which takes a long time to complete and want to be continuously updated about the output of the function.
You can do it with sed:
seq 5 | sed '$a\6'
seq 5 | sed '$ s/.*/\0 6/'
In your example:
echo input | sed 's/.*/\0string/'
I know this is a few years late, but you can accomplish this with the xargs -J option:
echo "input" | xargs -J "%" echo "%" "string"
And since it is xargs, you can do this on multiple lines of a file at once. If the file 'names' has three lines, like:
Adam
Bob
Charlie
You could do:
cat names | xargs -n 1 -J "%" echo "I like" "%" "because he is nice"
Also works:
seq -w 0 100 | xargs -I {} echo "string "{}
Will generate strings like:
string 000
string 001
string 002
string 003
string 004
...
The command you posted would take the string "input" use it as COMMAND's stdin stream, which would not produce the results you are looking for unless COMMAND first printed out the contents of its stdin and then printed out its command line arguments.
It seems like what you want to do is more close to command substitution.
http://www.gnu.org/software/bash/manual/html_node/Command-Substitution.html#Command-Substitution
With command substitution you can have a commandline like this:
echo input `COMMAND "string"`
This will first evaluate COMMAND with "string" as input, and then expand the results of that commands execution onto a line, replacing what's between the ‘`’ characters.
cat will be my choice: ls | cat - <(echo new line)
With perl
echo "input" | perl -ne 'print "prefix $_"'
Output:
prefix input
A solution using sd (basically a modern sed; much easier to use IMO):
# replace '$' (end of string marker) with 'Ipsum'
# the `e` flag disables multi-line matching (treats all lines as one)
$ echo "Lorem" | sd --flags e '$' 'Ipsum'
Lorem
Ipsum#no new line here
You might observe that Ipsum appears on a new line, and the output is missing a \n. The reason is echo's output ends in a \n, and you didn't tell sd to add a new \n. sd is technically correct because it's doing exactly what you are asking it to do and nothing else.
However this may not be what you want, so instead you can do this:
# replace '\n$' (new line, immediately followed by end of string) by 'Ipsum\n'
# don't forget to re-add the `\n` that you removed (if you want it)
$ echo "Lorem" | sd --flags e '\n$' 'Ipsum\n'
LoremIpsum
If you have a multi-line string, but you want to append to the end of each individual line:
$ ls
foo bar baz
$ ls | sd '\n' '/file\n'
bar/file
baz/file
foo/file
I want to prepend my sql script with "set" statement before running it.
So I echo the "set" instruction, then pipe it to cat. Command cat takes two parameters : STDIN marked as "-" and my sql file, cat joins both of them to one output. Next I pass the result to mysql command to run it as a script.
echo "set #ZERO_PRODUCTS_DISPLAY='$ZERO_PRODUCTS_DISPLAY';" | cat - sql/test_parameter.sql | mysql
p.s. mysql login and password stored in .my.cnf file