i am trying to find a automatic way to clean my Maven local repository.
i am already tried using the purge plugin but he didn't work as i expected (was no consistent). then i tried the remove-project-artifact plugin. This plugin work as i expected, but then i had new problem, i have more then one Maven project that use the same local repository, so when a few build run in the same time (only one of the build operator the remove-project-artifact plugin), some of the build are failing because of this plugin.
so my question is if someone had the same problem and managed to solve it?
I believe that the answer will be really easy, but I haven't figure out how to do it.
The problem is:
I have a third-party project, which is being cloned from github, so I'm not going to change anything there, but I need this project for my work with MUnit.
The project is mule-interceptor-module and it has a version 3.4-M4-SNAPSHOT.
I created a build in Jenkins and I want to get mule-interceptor-module-3.4-M4-SNAPSHOT.jar after it, but Jenkins REMOVES -SNAPSHOT from the jar name and updates pom.xml with new version: 3.4-M4 instead of 3.4-M4-SNAPSHOT. The project, which uses this one (munit) in its dependencies has 3.4-M4-SNAPSHOT. So I need the SNAPSHOT in version.
What I tried to do:
I tried to build the same project on the server, which my Jenkins is installed on, using just mvn clean install and I got mule-interceptor-module-3.4-M4-SNAPSHOT.jar.
The question is:
How to tune Jenkins so that I could finally have SNAPSHOT build?
My job setup:
JDK: jdk 1.6.0_45
Source Code Management:
Git
Repository URL: https://github.com/mulesoft/mule-interceptor-module.git
Branch Specifier (blank for default):3.4.x
Repository browser: githubweb
URL: https://github.com/mulesoft/mule-interceptor-module/
Pre Steps:
Execute shell: git checkout 3.4.x
Build:
Root POM: pom.xml
Goals and options: clean install
Post steps:
Run regardless of build result
Build Settings:
- Publish Checkstyle analysis results
- Publish FindBugs analysis results
Jenkins Console output
Jenkins Console output wirh -X
The solution:
in Jenkins /Configuration/Build/Advanced check in Use private Maven repository
Choose Strategy: Local to the workspace
remove everything from /workspace folder by rm -R *
#Grove: thanks you a lot for the support!
I can see in the logs: Your branch is ahead of 'origin/3.4.x' by 1 commit. and Building Mule Interceptor Module 3.4-M4. Could it be that your revision has 3.4-M4 as a version in the pom?
The solution:
in Jenkins /Configuration/Build/Advanced check in Use private Maven repository
Choose Strategy: Local to the workspace
remove everything from /workspace folder by rm -R *
Why are using SNAPSHOT dependency from a 3rd party ? The standard is to use a RELEASE version, right ?
Answer Anyways the fact that using the private maven repository worked for you proves just one thing, that the negative cache in your server's maven repo was causing the problem. See this Q and A from me more than a year back, when exactly the same solution worked for me, albiet for a different problem and I marked it as the answer. Only to find a few months later that I did not go to the root cause of the problem and just found a workaorund.
To test this theory, set <updatepolicy> true <updatepolicy> and use maven -U clean install. It will have the same effect as your solution of using a private repo.
Today while doing the release of our project, the release:perform command failed in between as our nexus was having intermittent issues. The release command only able to upload one pom file to nexus.
Now, the nexus issue is resolved and I am trying to do the release, it fails as the pom file already exists and its not the snapshot version and we don't have access to nexus so that I can delete that file and start over again.
Is there any way I can pass an argument so that release:perform should continue if the file is already there and ignore this but continue with uploading the rest.
I have looked for options of such type but didn't find anything.
My last resource would be to start the release again, which will bump the version number, but would like to understand if there is any other approach where in I don't need to bump the version.
I am using maven 2.2.1
Here's how I have handled this in the past. The release:perform command does a checkout of the tag from your SCM provider (e.g. SVN). This is done in the target/checkout directory of that project - whatever is there should be an exact copy of the released tag, so it will have the right version number in the pom files etc.
If you move to that directory (target/checkout in the directory where you started the release), you can simply do a mvn deploy there and it should compile and package that version, and then upload it to your Nexus instance.
If you don't have the target/checkout directory, you can check out the Tag created as part of the release:prepare phase from your SCM system to a fresh directory and run mvn deploy there.
Since the tag in your SCM has already been created, the only thing that's left is really compiling, packaging and deploying the release, which is exactly what mvn deploy should do.
If you have provided additional parameters (e.g. for activating profiles) for the build during the call to mvn release:perform, you will have to provide these as well when you run mvn deploy.
Using this approach, your version number will not have to change, it can stay the same, since you're just uploading what has already been tagged as part of mvn release:prepare.
My advice would be for you to request from the admins that the old artifact be removed. You can either re-deploy the code from the tag by checking it out and simply doing
mvn deploy
Or rolling back your release:
mvn release:rollback
And re-doing it as usual.
It is essential to remove the old artifact from the remote repository, if the sizes do not match. Release repositories do not allow the redeployment of artifacts, unless this has been explicitly switched on on the server side.
Furthermore, #nwinkler's answer is also quite good.
Occasionally maven complains that a particular dependency, which is built and packaged locally, cannot be found in the local repository while building another project that has it as a dependency. We get an error like:
Failed to execute goal on project X: Could not resolve dependencies for project X: Failure to find Y in [archiva repository] was cached in the local repository, resolution will not be reattempted until the update interval of internal has elapsed or updates are forced ->
Where X is the project being built, and Y is the supposedly missing artifact. If you look in the local repository, the artifact is there. This artifact is never installed in our archiva repository, so the problem is purely based in the local repository.
We have tried various profiles in settings.xml, and of course "mvn -U". Neither do any good, nor should they because this artifact never goes any further than the local repository.
The only two things that seem to work are to wait a very long time until maven smartens up, or to completely delete the local repository. Presumably the waiting option is related to the aforementioned update interval.
We have experienced this problem with maven 3.0.2 and 3.0.3. We are using Archiva 1.0.3 (but again this shouldn't be a factor). Any help would be greatly appreciated.
The local Maven repo tracks where artifacts originally came from using a file named "_maven.repositories" in the artifact directory. After removing it, the build worked. This answer fixed the problem for me.
As the options here didn't work for me, I'm sharing how I solved it:
My project has a parent project (with its own pom.xml) that has many children modules, one of which (A) has a dependency to another child (B). When I tried mvn package in A, it didn't work because B could not be resolved.
Executing mvn install in the parent directory did the job. After that, I could do mvn package inside of A and only then it could find B.
Even in offline mode, maven will check remote repositories if there is a _remote.repositories marker for the dependency. If you need to operate in offline mode, you may need to delete these files.
The simple shell command below deletes these marker files. This is safe to do if you only use offline mode for the machine. I would NOT do this on a machine that needs to pull files down from the web.
I have used this strategy on a build server that is disconnected from the web. We have to transfer the repository to it, delete the marker files and then run in offline mode.
On Linux / Unix you can delete the remote repository marker files this way:
cd ~/.m2
find . -name "_remote.repositories" -type f -delete
Maven remembers when it didn't find something. The key is "resolution will not be reattempted until the update interval of internal has elapsed or updates are forced ->"
The quick solution is to delete your local "repository" subdirectory for the problem artifact - assuming you have fixed the problem with it. :)
mvn -U will force update from remote repository - again, assuming you have now populated remote with said artifact.
When this happened to me, it was because I'd blindly copied my settings.xml from a template and it still had the blank <localRepository/> element. This means that there's no local repository used when resolving dependencies (though your installed artifacts do still get put in the default location). When I'd replaced that with <localRepository>${user.home}\.m2\repository</localRepository> it started working.
For *nix, that would be <localRepository>${user.home}/.m2/repository</localRepository>, I suppose.
If you have <repositories/> defined in your pom.xml apparently your local repository is ignored.
Catch all. When solutions mentioned here don't work(happend in my case), simply delete all contents from '.m2' folder/directory, and do mvn clean install.
Even I faced this issue and solved it with 2 ways:
1) In your IDE select project and clean all projects then install all the maven dependencies by right clicking on project -> go to maven and Update project dependencies select all projects at once to install the same. Once this is done run the particular project
2) Else What you can do is check in the pom.xml for the dependencies for which you are getting error and "mvn clean install" those dependent project first and the install maven dependencies of the current project in which you facing issue. By this the dependencies of the local project will be build and jars will be created.
I run to the similar problem when my new project depend on oracle jdbc jar(which I have installed in my local repository and work well for other projects). I tried -U option ,deleting .lastupdate file or the whole directory and downlaod again,but it did not work. finally,I deleted the directory and installed it locally again,it works.
One of the errors I found around Maven is when I put my settings.xml file in the wrong directory. It has to be in .m2 folder under your user home dir. Check to make sure that is in the right place (along with settings-security.xml if you are using that).
I had DependencyResolutionException in Ubuntu Linux when I've installed local artifacts via a shell script. The solution was to delete the local artifacts and install them again "manually" - calling mvn install:install-file via terminal.
This happened because I had http instead of https in this:
<repository>
<id>jcenter</id>
<name>jcenter-bintray</name>
<url>https://jcenter.bintray.com</url>
</repository>
check if if your artifact Y have packaging set to "jar". If you have defined it as "war" by error or copy paste, it will show this strange "was cached in the local repository, resolution will not be reattempted until the update interval of internal has elapsed or updates are forced". I would expect something like "artifact Y is war, jar type expected".
In my case I needed project Y to be a WAR to be deployed through Tomcat, as well as it needed to be a JAR to be able to add it as a dependency in project X.
So in project Y's pom.xml, I added this plugin to create a JAR along with the WAR:
<plugin>
<artifactId>maven-war-plugin</artifactId>
<version>3.2.2</version>
<configuration>
<attachClasses>true</attachClasses>
<classesClassifier>classes</classesClassifier>
</configuration>
</plugin>
And while adding the dependency of project Y in project X's pom.xml, I had to add a classifier:
<dependency>
<groupId>groupId.of.project.Y</groupId>
<artifactId>project.Y</artifactId>
<version>1.0-SNAPSHOT</version>
<classifier>classes</classifier>
</dependency>
Note: when you build project Y, you will see 2 packagings in the target folder: project-Y.war and project-Y-classes.jar, so that's why while importing you are specifying the classes classifier to import the JAR and not the WAR.
Here is the long Solution to the problem
(Not Quick fix but will work if no other solution)
You're going to hate me for saying this but this is the truth about open source projects like eclipse. Because Open source is modular and allows you to build and develop a project in many ways with many tools such as maven, spring boot, options for xml or groovy, different eclipse updates & Etc. The problem is that eclipse allows you to run the project with missing maven builds because the IDE is smart enough to resolve dependencies using a remote_repository where it stores and catches the jar files that is not properly built on the project.
Because of this feature, You may actually have local build issues but just like DNS servers; if the solution is not found in the local directory, Eclipse will look for a solution in it's remote cached repository. When you delete the remote_repository and let Maven rebuild it a second time, The project may end up creating more errors and not build a second time or may possibly rebuild a cache that was missing. But that is unlikely.
So the long answer to fix your solution.
This is a project architecture issue!
SOLUTION:
What you need to do is look in to all your dependant project's pom.xml file and the maven dependencies folder in your local project and try to resolve all the missing dependency jars in your maven dependency folder. If you have a referenced library, I suggest moving those jars into your local project's maven dependency folder.
You have to work your way into solving every child project and then navigate into your root project and fix every single project by using Maven -> Build -> clean install (check off "skip tests" & "resolve workspace artifacts") until every project builds with a clean success.
most likely, when you force update your entire solution to all your projects, you will get a list of errors that you have the IDE auto-resolve. The auto-resolve will refer to a easy reference to fix the issue. But to deploy, you have to manually fix the project because Eclipse, Spring & Maven will work well together but there are maybe a few things they don't agree on. So, you have to play diplomat in those situations and figure it out.
That's the sad truth.
All said, I have a list of problems in my project. I have this issue. The war file generated has empty jar folders and the build is not clean without errors unless i force it. The WAR file generate will run a 404 error on tomcat server production and my angular application will throw a Cors-Error when executing the API.
All the errors on my front end project is artificial because the root of all issues is the WAR file generated. It did not generate with dependencies, the Main project did not execute in tomcat and tomcat server cannot run the spring initializer to deploy the cors-policy on the server to allow my angular application to communicate. But all in all, development environment works fine with no issues.
So that is my long ended solution for this thread.
I had the same error from a different cause: I'd created a starter POM containing our "good practice" dependencies, and built & installed it locally to test it. I could "see" it in the repo, but a project that used it got the above error. What I'd done was set the starter POM to pom, so there was no JAR. Maven was quite correct that it wasn't in Nexus -- but I wasn't expecting it to be, so the error was, ummm, unhelpful. Changing the starter POM to normal packaging & reinstalling fixed the issue.
In my case I had to add mavenLocal() in root level gradle dependency
mavenCentral()
mavenLocal()
Our maven projects all build on a jenkins and then deploy the artifacts to a maven repository.
For some reason however there seems to be some kind of cache or update lag when building a project that has dependencies to other projects that just got newly build.
Say there's a bug in artifact A and B depends on A. Now I fix the bug locally, update my dependencies in B, run B and everything's fine. I check in obviously. Now I build A on Jenkins and afterwards B. I then get the newly built B and run it. The bug is still there. Hours later if I build B again it will kindly get the new A and the bug is gone..
So there must be a way to force jenkins to use the new A on its server. using mvn -u or mvn --update-snapshots will not help. It will check for updates and find none..
I believe there is no such caching behavior possible in Maven/Jenkins, as all your snapshot is built locally in the same instance of Jenkins. There is no need for the "update snapshot" option because you are not getting it from remote repo. However, I would recommend you to take a look in the repository setting in Jenkins. In Jenkins, we can change which maven repository to use (by default, it is shared by whole machine, but it can be changed to per-workspace or per-executor etc. (Under your project configuration, in Build -> Advanced, you can check for "Use private Maven repository", and in Manage Jenkins -> Configure System -> Maven Project Configuration, you can select the way to manage Local Maven Repository. I am suspecting you have changed it to "Local to executor"
If you have any setting that cause the build of A installed in a different repository that B use, you may hit problem you faced.