I want to export sc files from SpaceEngine, then for each file, create a new file with the same name but with the extension .txt.
Here is my code:
require 'fileutils'
require 'IO/console'
puts "Make sure your export folder is clear of everything but the files you want to turn into Object text files."
puts "Starting Process"
i = 0
Dir.foreach('C:\SpaceEngine\export') do |item|
next if item == '.' or item == '..'
i = i + 1
name = File.basename(item, ".*")
current = File.new("#{name}.txt", "w");
current.close
end
sleep 2
I have the latter part already, but I can't get it to read the original files one by one, and then only put certain things from the original into the new file.
# test.sc
# assume this is your test data
this has foo
this does not
this also has foo
this has some other stuff
this is the last line which has foo
blah
blah blah 💩
# filejunk.rb
# you need to write a method that handles the data inside the file you want to
# modify, change, replace etc. but for example
def replace_file_data(filename)
lines = File.readlines
lines.select{|l| l.include?'foo'} #assumes you only want lines with 'foo' in them
end
Dir.glob('C:\SpaceEngine\export\*.sc').each_with_index do |filename, i|
i += 1
name = File.basename(filename, ".*")
current = File.new("#{name}.txt", "w") {|f| f.write replace_file_data(filename) }
current.close
end
Related
Is it possible to write to a file while looping in Ruby? My code looks something like this:
navigator.rb
def launch_process
while obj.present?
return something while something_else
end
end
app.rb # launcher
navigator = Navigator.new(args)
var = navigator.launch_process
$file = File.open("output.csv", "a+")
open($file, 'a+') { |file| file.write(var) } # won't work
The idea is to update the CSV file with data that is being gradually returned by the Navigator Object, launch_process method.
Here's an example :
def launch_process(io)
10.times do |i|
sleep 1
io.puts i
## Uncomment this line if you want to update the file during every iteration
# io.flush
end
end
f = File.open('output.csv','a+')
launch_process(f)
f.close
If you post more code it would be easier to adapt this loop to your example.
I have a directory structure with sub-directories:
../../../../../MY_PROJECT/TEST_A/cats/
../../../../../MY_PROJECT/TEST_B/dogs/
../../../../../MY_PROJECT/TEST_A/tigers/
../../../../../MY_PROJECT/TEST_A/elephants/
each of which has a file that ends with ".sln":
../../../../../MY_PROJECT/TEST_A/cats/cats.sln
../../../../../MY_PROJECT/TEST_B/dogs/dogs.sln
...
These files contain information specific to their directory. I would like to do the following:
Create a file "myfile.txt" within each sub-directory, and write some strings to them:
../../../../../MY_PROJECT/TEST_A/cats/myfile.txt
../../../../../MY_PROJECT/TEST_B/dogs/myfile.txt
../../../../../MY_PROJECT/TEST_A/tigers/myfile.txt
../../../../../MY_PROJECT/TEST_A/elephants/myfile.txt
Copy a specific string in the ".sln" files to the myfile.txt of certain directories using the following method:
def parse_sln_files
sln_files = Dir["../../../../../MY_PROJECT/TEST_*/**/*.sln"]
sln_files.each do |file_name|
File.open(file_name) do |f|
f.each_line { |line|
if line =~ /C Source files ="..\\/ #"
path = line.scan(/".*.c"/)
puts path
end
}
end
end
end
I would like to do something like this:
def create_myfile
Dir['../../../../../MY_PROJECT/TEST_*/*/'].each do |dir|
File.new File.join(dir, 'myfile.txt'), 'w+'
Dir['../../../../../TEST/TEST_*/*/myfile.txt'].each do |path|
File.open(path,'w+') do |f|
f.puts "some text...."
f.puts "some text..."
f.puts # here I would like to return the result of parse_sln_files
end
end
end
end
Any suggestions on how to express this?
It seems like you want to read list of C file names from a Visual C++ Solution file, and store in a separate file in the same directory. You may have to merge the two loops that you have shown in your code, and do something like this:
def parse_sln_and_store_source_files
sln_files = Dir["../../../../../MY_PROJECT/TEST_*/**/*.sln"]
sln_files.each do |file_name|
#### Lets collect source file names in this array
source_file_names = []
File.open(file_name) do |f|
f.each_line { |line|
if line =~ /C Source files ="..\\/ #"
path = line.scan(/".*.c"/)
############ Add path to array ############
source_file_names << path
end
}
end
#### lets create `myfile.txt` in same dir as that of .sln
test_file = File.expand_path(File.dirname(file_name)) + "/myfile.txt"
File.open(test_file,'w+') do |f|
f.puts "some text...."
f.puts "some text..."
##### Iterate over source file names & write to file
source_file_names.each { |n| f.puts n }
end
end
end
This can be done bit more elegantly with few more refactoring. Also note that this is not tested code, hopefully, you get the gist of what I am suggesting.
I am trying to write a script to do the following:
There are two directories A and B. In directory A, there are files called "today" and "today1". In directory B, there are three files called "today", "today1" and "otherfile".
I want to loop over the files in directory A and append the files that have similar names in directory B to the files in Directory A.
I wrote the method below to handle this but I am not sure if this is on track or if there is a more straightforward way to handle such a case?
Please note I am running the script from directory B.
def append_data_to_daily_files
directory = "B"
Dir.entries('B').each do |file|
fileName = file
next if file == '.' or file == '..'
File.open(File.join(directory, file), 'a') {|file|
Dir.entries('.').each do |item|
next if !(item.match(/fileName/))
File.open(item, "r")
file<<item
item.close
end
#file.puts "hello"
file.close
}
end
end
In my opinion, your append_data_to_daily_files() method is trying to do too many things -- which makes it difficult to reason about. Break down the logic into very small steps, and write a simple method for each step. Here's a start along that path.
require 'set'
def dir_entries(dir)
Dir.chdir(dir) {
return Dir.glob('*').to_set
}
end
def append_file_content(target, source)
File.open(target, 'a') { |fh|
fh.write(IO.read(source))
}
end
def append_common_files(target_dir, source_dir)
ts = dir_entries(target_dir)
ss = dir_entries(source_dir)
common_files = ts.intersection(ss)
common_files.each do |file_name|
t = File.join(target_dir, file_name)
s = File.join(source_dir, file_name)
append_file_content(t, s)
end
end
# Run script like this:
# ruby my_script.rb A B
append_common_files(*ARGV)
By using a Set, you can easily figure out the common files. By using glob you can avoid the hassle of filtering out the dot-directories. By designing the code to take its directory names from the command line (rather than hard-coding the names in the script), you end up with a potentially re-usable tool.
My solution....
def append_old_logs_to_daily_files
directory = "B"
#For each file in the folder "B"
Dir.entries('B').each do |file|
fileName = file
#skip dot directories
next if file == '.' or file == '..'
#Open each file
File.open(File.join(directory, file), 'a') {|file|
#Get each log file from the current directory in turn
Dir.entries('.').each do |item|
next if item == '.' or item == '..'
#that matches the day we are looking for
next if !(item.match(fileName))
#Read the log file
logFilesToBeCopied = File.open(item, "r")
contents = logFilesToBeCopied.read
file<<contents
end
file.close
}
end
end
Below is the piece of code that is supposed read the directory and for each file entry prints the first row of the file. The issue is x is not visible so file is not being parsed.
Dir.foreach("C:/fileload/src") do |file_name|
x = file_name
puts x
f = File.open("C:/fileload/src/" +x)
f.readlines[1..1].each do |line|
puts line
end
end
Why are you assigning x to file_name? You can use file_name directly. And if you are only reading the first line of the file, why not try this?
#!/usr/bin/ruby
dir = "C:/fileload/src"
Dir.foreach(dir) do |file_name|
full = File.join(dir, file_name)
if File.file?(full)
f = File.open(full)
puts f.first
f.close
end
end
You should use File.join to safely combine paths in Ruby. I also checked that you are opening a file using the File.file? method.
You have no visibility issue with x. You should be using File::join or Pathname#+ to build your file paths. You should exclude non-files from consideration. You're selecting the second line, not the first with [1..1]. Here's a cleaner correct replacement for your sample code.
dir = "C:/fileload/src"
Dir.foreach(dir).
map { |fn| File.join(dir,fn) }.
select { |fn| File.file?(fn) }.
each { |fn| puts File.readlines(fn).first }
I am trying to read file lines from a directory containing about 200 text files, however, I can't get Ruby to read them line-by-line. I did it before, using one text file, not reading them from a directory.
I can get the file names as strings, but I am struggling to open them and read each line.
Here are some of the methods I've tried.
Method 1:
def readdirectory
#filearray = []
Dir.foreach('mydirectory') do |i|
# puts i.class
#filearray.push(i)
#filearray.each do |s|
# #words =IO.readlines('s')
puts s
end#do
# puts #words
end#do
end#readdirectory
Method 2:
def tryread
Dir.foreach('mydir'){
|x| IO.readlines(x)
}
end#tryread
Method 3:
def tryread
Dir.foreach('mydir') do |s|
File.readlines(s).each do |line|
sentence =line.split
end#inner do
end #do
end#tryread
With every attempt to open the string passed by the loop function, I keep getting the error:
Permission denied - . (Errno::EACCES)
sudo ruby reader.rb or whatever your filename is.
Since permissions are process based you can not read files with elevated permissions if the process reading does not have them.
Only solutions are either to run the script with more permissions or call another process which is already running with higher permissions to read for you.
Thanks for all replies,I did a bit of trial and error and got it to work.This is the syntax I used
Dir.entries('lemmatised').each do |s|
if !File.directory?(s)
file = File.open("pathname/#{s}", 'r')
file.each_line do |line|
count+=1
#words<<line.split(/[^a-zA-Z]/)
end # inner do
puts #words
end #if
end #do
Try this one,
#it'll hold the lines
f = []
#here test directory contains all the files,
#write the path as per the your computer,
#mine's as you can see, below
#fetch filenames and keep in sorted order
a = Dir.entries("c:/Users/lordsangram/desktop/test")
#read the files, line by line
Dir.chdir("c:/Users/lordsangram/desktop/test")
#beginning for i = 1, to ignore first two elements of array a,
#which has no associated file names
2.upto(a.length-1) do |i|
File.readlines("#{a[i]}").each do |line|
f.push(line)
end
end
f.each do |l|
puts l
end
#the Tin Man -> you need to avoid processing "." and ".." which are listed in Dir.foreach and give the permission denied error. A simple if should fix all your apporoaches.
Dir.foreach(ARGV[0]) do |f|
if f != "." and f != ".."
# code to process file
# example
# File.open(ARGV[0] + "\\" + f) do |file|
# end
end
end