My computer recently froze while debugging a project (on Visual Studio 2017).
No data was lost (because everything is saved and compiled before debug anyway), but now every time I open the project the Visual Studio environment looks like it did on the day it froze. The most recent session state is never saved, so I have to manually find and reopen all the pages I was just working on.
No data is lost and my work is still progressing as normal. It's just mildly annoying having to do this every time.
I presume there's a file somewhere that needs deleting. Not sure which one to safely remove though.
Thanks.
Found the answer here: visual studio not remembering open documents & startup project
Deleted .csproj.user file and everything in the .vs/[projectName]/v15 folder. It may be a hidden folder so be sure to tell your File Explorer to show hidden files.
Related
I am getting an inconsistent error with Visual Studio 2015 that is severely hampering my productivity.
I am working on a very large application that I have pulled down from TFS. Sometimes when working I will try and save the file that I was working on, and have the asterix not go away and the file not save. This is despite running the application in Administrator.
Sometimes the solution is simply to rebuild the project and then try to save, however when this doesn't work I need close down visual studio and start up again, losing all my saves anyways.
This isn't too bad when I am working on .net files because the problem happens a lot less, and the solution is almost always to just rebuild, which is much better than having to re boot vs. However recently I have been working on javascript files within visual studio, and with them I get about one save, then the problems comes up, and rebuilding doesn't fix issue, causing me to have to reboot visual studio every save I make...
I have tried searching online for people who have faced a similar issue, or asked around my work, and no one seems to have ever had a similar problem. So hopefully, for my sanity's sake, someone knows what the heck is going on with my visual studio. Thanks!
I am currently running VS2019 16.7.2 and sometimes it just refuses to save no matter what I do. I try Ctrl + S, File -> "Save all", closing the window (which causes the changes to be lost) but nothing works.
Though for some reason when first I press the File -> "Save ... as" option in the menu and then cancel it, that releases the "save lock" and suddenly I am able to save again. Not really a satisfactory solution but at least all changes aren't lost. Maybe it will work on other versions as well?
I will give an answer to a problem which might not be exactly the same as the one reported by the author, but it is fairly close, and people searching for a solution to this problem are likely to arrive to this question.
In my case, in my entire solution containing thousands of files, there was only one particular file that Visual Studio was consistently failing to save when needed. As a result, after each commit, the "Git Changes" tab would not appear completely empty. All files would be committed, except this one file, which would appear as still uncommitted. So, I would have to manually save it and then amend the last commit in order to arrive at a completely empty "Git Changes" tab.
I thought that the problem might be due to some discrepancy between the letter case of the filename on disk (which is what the "Git Changes" view reports) and the letter case of the filename in the visual studio project file (which is what the "Solution Explorer" view reports) but it turns out that this was not it.
After much troubleshooting, I discovered that the following sequence of magical incantations solves the problem, I have no idea why:
In "Solution Explorer" locate the problematic file.
Rename the problematic file to something else.
Commit (with amend if you wish) the file.
Rename the file back to its original name.
Commit (with amend) the file again.
Restart Visual Studio.
The last step of restarting Visual studio is not strictly speaking necessary, but it is useful in case you have a letter case mismatch, because Visual Studio seems to be somehow caching filenames, (or at any rate not detecting that the capitalization of a filename has changed,) and restarting it makes it come to its senses.
I realize this is an old question but I had a similar problem with a solution file I had upgraded from Visual Studio 2015 to Visual Studio 2022. I was unable to save any changes to the solution, although the file was writable in notepad.
Deleting the section in the solution file as suggested by Richard Stanton's workaround fixed it for me!
developercommunity.visualstudio.com Workaround
Delete the following section from the solution file:
ProjectSection(FolderStartupServices) = postProject
{B4F97281-0DBD-4835-9ED8-7DFB966E87FF} = {B4F97281-0DBD-4835-9ED8-7DFB966E87FF}
EndProjectSection
Visual Studio's Go To Definition is disabled and F12 doesn't work. Other commands like Alt-F12 may continue working.
Close the solution.
Delete the intellisense database file for the solution: [solution].ncb or [solution].suo
Reopen the solution.
Optional: Rebuild the solution.
Note that this can also be as a result of disabling database for C++/C#.
In Tools - Options, type "IntelliSense" into the search box, and click on C/C++ - Advanced. In the Browsing/Navigation section, change Disable Database to False, if it is not so already.
After re-enabling, close and reopen to force rebuild.
NOTE: IntelliSense will produce large files on disk (*.sdf and ipch) that should be excluded from Git, for example.
I know the solution has been resolved. However, I encountered the exact same problem. I searched internet. None of the trick works including this one.
Eventually, I figured out. I right clicked on the file that had the problem. I included the file in the project. Isn't that obvious. Actually not, the file has been included for a week. I have been working on that file more than 7 hours a day for the whole week. Up till yesterday 6:20 pm.
Oh, I could not compile correctly this morning. There were tons of syntax error message yesterday. This morning, I was able to compile. Strange. right? Then my go to definition was gone.
Took me a while to find out cs and designer.cs were certainly excluded, but aspx file was.
I solved the problem. Did my figure slip? I don't know.
That is one thing people check. Either yourself, someone else, or system accidentally exclude the cs files without the knowledge. I know it is strange, but it solved the problem. There are weird scenarios in Visual studio. People can present 200 solutions. They work for 99% of time, but not our cases. I just bring one more scenario
I encountered this in Visual Studio 2010.
For me, this solution did the trick
Close all the files.
Reopen the files.
and you are good to go.
This also happens, if Visual Studio has files opened, which are not in the current Solution.
I don't know how I got to this state, where files of a different solution where open as I didn't open them manually, but a quick check of the file path showed that those weren't files of the opened solution.
Therefore, "Go to Definition" was disabled.
I found that I had to remove my TFS mapping:
VS 2010 > open Team Explorer > Drill into the team project > double click source control > right click on the team project in the left pane and do "Remove Mapping" > after everything was removed I manually went to the local folder and deleted any lingering files > back in source control explorer I re-mapped to the same local folder and re-pulled all the code. Now the "go to definition" works again.
Not sure why I had to do this...
Check dll in references which is yellow. Remove it and add again.
I've just had this happen with a CMake-based C++ project in Visual Studio 2019. Everything was fine yesterday, then when I opened it up today all the Go To Definition/Declaration etc options were greyed out everywhere in every file in the project, even for things defined within the same file (and the syntax highlighting didn't look right either). It did work if I opened one of the .cpp files separately on its own (without loading the Project/Solution).
I tried various things including the answers here and telling it to generate the CMake cache again, but what finally fixed it was actually deleting the CMake cache. The Delete Cache option didn't seem to work (all the files were still there on disk, and there was some sort of failure message in the Output window) so I just deleted the entire "out" directory from the project directory (well, moved it somewhere outside of the project, just in case). Loaded up Visual Studio again, it rebuilt the cache again automatically and IntelliSense immediately started working again! I just had to wait 5 minutes for it to compile everything again when I wanted to run the project.
Maybe it wasn't necessary to remove the entire "out" directory, but when I clicked "Open in Explorer" under the "CMake Cache" menu it opened the actual build directory (which was the only thing in the "out" directory anyway) so I assumed the entire thing was related to the cache and was getting too fed up with it to try to narrow it down further. It's probably only certain files within that directory really.
Tried all the above solutions in my VS2019, nothing worked for me. Than I've noticed an update sign on the bottom Right corner. After updating the VS all options were restored.
Simple just check your bottom left corner of Visual Studio if Restricted turn it as a trusted and your problem will solve.
In my case due to my project is mapped with TFS so I am unable to go to definition also my project files showing read only when opening from Solution. So I have move to my root folder mapped with TFS and then right-clicked on folder > Go to properties > Attributes section was Read-Only I have unchecked it and clicked Apply. Reopen visual studio. Everything is now working fine.
I faced the same Issue in my Visual Studio 2019 version.I followed the below Steps:
Go to references folder in the solution.
Click on Manage Nuget packages.
Click on Browse.
Search for 'Microsoft.Net.Compilers'.
Click on Update.
This Worked for me.
In my case, another Visual Stuidio was opened (not closed succsessfully). Close all examples of VS, then re open solution.
Just open the Solution using Windows Explorer, instead of opening it from inside VS...
Like a zombie. I delete it by clicking on it, I remove it by right clicking on it. It keeps coming back. I close the file, I restart the VWDE process, I reboot. Doesn't matter, it's there forever. I can't see any way of getting rid of it.
One possibility here is that Visual Studio is failing to save the deleted breakpoint to disk. Hence it lasts for the session but comes back when you restart Visual Studio.
To test this check to see if the .suo file for your solution is readonly on disk. Or simply delete it and restart Visual Studio and see if the problem comes back. The .suo file is hidden but should be in the same folder as the .sln file.
Try the menu command, Debug - Delete All Breakpoints.
My visual studio 2010 crashed when some carelessness [bit of madness] mistakenly pressed start button and my Acer timeline got unstable. Two projects where open at the time, one in visual studio 2005 [I have both 2005 and 2010 installed]. Unfortunately I lost all the codes I had done at the time along with those coded even weeks before. Now the project files in both the solutions are those weeks older. Amazingly, the .aspx pages are intact and .cs files are gone.
What can be done to get the lost data? Help please.
Thanks.
Guys TAKE CARE if your Visual Studio crashes, you need to check the backup BEFORE you restart Visual Studio and check if your files are ok! Many people complain that they lost work after a crash, and then they restart Visual Studio, and upon discovering that their code cannot be found in Visual Studio they then check the backup at the location
%USERPROFILE%\Documents\Visual Studio 2010\Backup Files\\
The order is important. Check the backup FIRST, before restarting Visual Studio. If you start Visual Studio and then open your old project it's probable that Visual Studio will overwrite the backup files for that project.
Securing the backup is your FIRST concern. Then start Visual Studio and open your project to see how much damage there is.
You can check:
C:\Users\<username>\Documents\Visual Studio 2010\Backup Files\<ProjectName>\
C:\Users\<username>\Documents\Visual Studio 2005\Backup Files\<ProjectName>\
More information can be found here:
Visual Studio 2010 AutoRecover Feature
I just had the same experience -- losing a source file during a BSOD. Very annoying!
No backup file could be found, and I searched the hard drive for a file containing the class name, but no backup was unturned.
However I was able to get back something resembling my code by decompiling a DLL from the bin/Debug folder using DotPeek. So if you had previously compiled your code successfully, you can get the code (without comments, and with some weird local variable names, etc) via decompilation.
I Had the same problem, I lost code due to BSOD.
the backup folder should store files not saved until they are saved whenever you save the files there are deleted.
I think that maybe they don't remain after a restart as it was empty in my case.
A very good file recovery tool is Recuva. It helped me once, didn't help me second time, though, because I noticed the data loss too late, and all recoverable data got overwritten.
So I used DotPeek, though you'll have to do a lot of work on the disassembled files, they are pretty weird.
Now I put my source tree in Google Drive, because it has file versions and keeps deleted files. Dropbox would do, too.
Git or any other VCS are not solution for this thing, because you cannot have crazy amount of meaningless commits.
We're using VS 2010 and GIT. Occasionally, after a git pull, all open files will close--seems like this happens when new files are added to the project. I can't seem to find a related file that shouldn't be in version control. Has anyone else had this issue?
I figured out a solution to this. It's a little annoying but it works around the tedious task of re-opening all of your tabs/files in VS.
When you get the VS warning that the Project has been modified outside of VS it asks if you want to reload the project. Choose "Ignore."
Next, save all your work, close VS and reopen your solution or project. All the files/tabs you had open previously will be open again and the updates to the project file, obviously, will also be loaded.
Another caveat to this is you lose all your "Undo" potential in your open files.
When a .vcproj file gets touched (not necessarily changed), all its opened files are closed and never reopened. Might this be what you are experiencing?
Check out
WorkspaceReloder.
It's a visual studio add in that will keep your files open upon reloading. It's tremendously useful and will keep you from having to go through those ridiculous steps. Productivity++.