Related
Hi sorry for the confusing title.
I'm trying to make a race track using points. I want to draw 3 rectangles which form my roads. However I don't want these rectangles to overlap, I want to leave an empty space between them to place my corners (triangles) meaning they only intersect at a single point. Since the roads have a common width I know the width of the rectangles.
I know the coordinates of the points A, B and C and therefore their length and the angles between them. From this I think I can say that the angles of the yellow triangle are the same as those of the outer triangle. From there I can work out the lengths of the sides of the blue triangles. However I don't know how to find the coordinates of the points of the blue triangles or the length of the sides of the yellow triangle and therefore the rectangles.
This is an X-Y problem (asking us how to accomplish X because you think it would help you solve a problem Y better solved another way), but luckily you gave us Y so I can just answer that.
What you should do is find the lines that are the edges of the roads, figure out where they intersect, and proceed to calculate everything else from that.
First, given 2 points P and Q, we can write down the line between them in parameterized form as f(t) = P + t(Q - P). Note that Q - P = v is the vector representing the direction of the line.
Second, given a vector v = (x_v, y_v) the vector (y_v, -x_v) is at right angles to it. Divide by its length sqrt(x_v**2 + y_v**2) and you have a unit vector at right angles to the first. Project P and Q a distance d along this vector, and you've got 2 points on a parallel line at distance d from your original line.
There are two such parallel lines. Given a point on the line and a point off of the line, the sign of the dot product of your normal vector with the vector between those two lines tells you whether you've found the parallel line on the same side as the other, or on the opposite side.
You just need to figure out where they intersect. But figuring out where lines P1 + t*v1 and P2 + s*v2 intersect can be done by setting up 2 equations in 2 variables and solving that. Which calculation you can carry out.
And now you have sufficient information to calculate the edges of the roads, which edges are inside, and every intersection in your diagram. Which lets you figure out anything else that you need.
Slightly different approach with a bit of trigonometry:
Define vectors
b = B - A
c = C - A
uB = Normalized(b)
uC = Normalized(c)
angle
Alpha = atan2(CrossProduct(b, c), DotProduct(b,c))
HalfA = Alpha / 2
HalfW = Width / 2
uB_Perp = (-uB.Y, ub.X) //unit vector, perpendicular to b
//now calculate points:
P1 = A + HalfW * (uB * ctg(HalfA) + uB_Perp) //outer blue triangle vertice
P2 = A + HalfW * (uB * ctg(HalfA) - uB_Perp) //inner blue triangle vertice, lies on bisector
(I did not consider extra case of too large width)
I have an array of diamonds as shown in the image and I know the position of every diamond and the distance from the origin of the diamond to any vertex (They are all the same distance from the center). I am also given a point. Given that information what is the most efficient method to find which diamond the point is in.
I know that I can just check the distance of the point from the position of every diamond but that seems way too cpu intensive as I have to do this multiple times.
Also, this shouldn't matter, but I am using C# and Unity 3D to do this.
If your diamonds form a regular pattern as in your picture, then just perform coordinate transformation to rotate the whole thing 45 degrees CW or CCW with (0, 0) as the origin. After that the problem becomes trivial: locating a point in a regular orthogonal grid.
Diamonds border line have equations
x + y = a0 + u * Size
y - x = b0 + v * Size
where a0, b0 are coordinates of the some vertex of base diamond (that has cell coordinates 0, 0), u and v are cell coordinates, Size is edge length. So to find what diamond point (px, py) belongs to, you can calculate
u = Floor((px + py - a0) / Size))
v = Floor((py - px - b0) / Size))
I am writing a graphics application that needs to calculate and display a list of points along a curve arc which is described by three points.
Lets say we have points (1,1), (2,4) and (5,2). I need an algorithm that can give me the values of y for each x from 1 to 5 that fall on the interpolated arc.
I'm sure this is a simple task for you math whizes out there, but for me it's a bit beyond my mathematical payscale.
Thanks in advance!
So the problem is how to compute the center C = (c1, c2) and radius r of a circumference given by three points P = (p1, p2), Q = (q1, q2) and S = (s1, s2).
The idea is very simple. It consists in realizing that, by definition, the center has the same distance to all three points P, Q and S.
Now, the set of all points that are equidistant from Pand Q is the perpendicular to the segment PQ incident at the mid point (P+Q)/2. Similarly, the set of all points equidistant from Q and S is the perpendicular to QS passing thru (Q+S)/2. So, the center C must be the intersection of these two lines.
Let's compute the parametric equations of these two straight lines.
For this we will need two additional functions that I will call dist(A,B) which computes the distance between points A and B and perp(A,B) that normalizes the vector B-A dividing it by its length (or norm) and answers the perpendicular vector to this normalized vector (keep in mind that a perpendicular to (a,b) is (-b,a) because their inner product is 0)
dist((a1,a2),(b1,b2))
Return sqrt(square(b1-a1) + square(b2-a2))
perp((a1,a2),(b1,b2))
dist := dist((a1,a2),(b1,b2)).
a := (b1-a1)/dist.
b := (b2-a2)/dist.
Return (-b,a).
We can now write the parametric expressions of our two lines
(P+Q)/2 + perp(P,Q)*t
(Q+S)/2 + perp(Q,S)*u
Note that both parameters are different, hence the introduction of two variables t and u.
Equating these parametric expressions:
(P+Q)/2 + perp(P,Q)*t = (Q+S)/2 + perp(Q,S)*u
which consists of two linear equations, one for each coordinate, and two unknowns t and u (see below). The solution of this 2x2 system gives the values of the parameters t and u that injected into the parametric expressions give the center C of the circumference.
Once C is known, the radius r can be calculated as r := dist(P,C).
Linear equations
(P+Q)/2 + perp(P,Q)*t = (Q+S)/2 + perp(Q,S)*u
First linear equation (coordinate x)
(p1+q1)/2 + (p2-q2)/dist(P,Q)*t = (q1+s1)/2 + (q2-s2)/dist(Q,S)*u
Second linear equation (coordinate y)
(p2+q2)/2 + (q1-p1)/dist(P,Q)*t = (q2+s2)/2 + (s1-q1)/dist(Q,S)*u
Linear System (2x2)
(p2-q2)/dist(P,Q)*t + (s2-q2)/dist(Q,S)*u = (s1-p1)/2
(q1-p1)/dist(P,Q)*t + (q1-s1)/dist(Q,S)*u = (s2-p2)/2
I have a list of 2D points (x1,y1),(x2,y2)......(Xn,Yn) representing a curved segment, is there any formula to determine whether the direction of drawing that segment is clockwise or anti clockwise ?
any help is appreciated
Alternately, you can use a bit of linear algebra. If you have three points a, b, and c, in that order, then do the following:
1) create the vectors u = (b-a) = (b.x-a.x,b.y-a.y) and v = (c-b) ...
2) calculate the cross product uxv = u.x*v.y-u.y*v.x
3) if uxv is -ve then a-b-c is curving in clockwise direction (and vice-versa).
by following a longer curve along in the same manner, you can even detect when as 's'-shaped curve changes from clockwise to anticlockwise, if that is useful.
One possible approach. It should work reasonably well if the sampling of the line represented by your list of points is uniform and smooth enough, and if the line is sufficiently simple.
Subtract the mean to "center" the line.
Convert to polar coordinates to get the angle.
Unwrap the angle, to make sure its increments are meaningful.
Check if total increment is possitive or negative.
I'm assuming you have the data in x and y vectors.
theta = cart2pol(x-mean(x), y-mean(y)); %// steps 1 and 2
theta = unwrap(theta); %// step 3
clockwise = theta(end)<theta(1); %// step 4. Gives 1 if CW, 0 if ACW
This only considers the integrated effect of all points. It doesn't tell you if there are "kinks" or sections with different directions of turn along the way.
A possible improvement would be to replace the average of x and y by some kind of integral. The reason is: if sampling is denser in a region the average will be biased towards that, whereas the integral wouldn't.
Now this is my approach, as mentioned in a comment to the question -
Another approach: draw a line from starting point to ending point. This line is indeed a vector. A CW curve has most of its part on RHS of this line. For CCW, left.
I wrote a sample code to elaborate this idea. Most of the explanation can be found in comments in the code.
clear;clc;close all
%% draw a spiral curve
N = 30;
theta = linspace(0,pi/2,N); % a CCW curve
rho = linspace(1,.5,N);
[x,y] = pol2cart(theta,rho);
clearvars theta rho N
plot(x,y);
hold on
%% find "the vector"
vec(:,:,1) = [x(1), y(1); x(end), y(end)]; % "the vector"
scatter(x(1),y(1), 200,'s','r','fill') % square is the starting point
scatter(x(end),y(end), 200,'^','r','fill') % triangle is the ending point
line(vec(:,1,1), vec(:,2,1), 'LineStyle', '-', 'Color', 'r')
%% find center of mass
com = [mean(x), mean(y)]; % center of mass
vec(:,:,2) = [x(1), y(1); com]; % secondary vector (start -> com)
scatter(com(1), com(2), 200,'d','k','fill') % diamond is the com
line(vec(:,1,2), vec(:,2,2), 'LineStyle', '-', 'Color', 'k')
%% find rotation angle
dif = diff(vec,1,1);
[ang, ~] = cart2pol(reshape(dif(1,1,:),1,[]), reshape(dif(1,2,:),1,[]));
clearvars dif
% now you can tell the answer by the rotation angle
if ( diff(ang)>0 )
disp('CW!')
else
disp('CCW!')
end
One can always tell on which side of the directed line (the vector) a point is, by comparing two vectors, namely, rotating vector [starting point -> center of mass] to the vector [starting point -> ending point], and then comparing the rotation angle to 0. A few seconds of mind-animating can help understand.
Actually this is a classic problem as SO user Victor put it (in another SO question regarding which tasks to ask during an interview).
I couldn't do it in an hour (sigh) so what is the algorithm that calculates the number of integer points within a triangle?
EDIT: Assume that the vertices are at integer coordinates. (otherwise it becomes a problem of finding all points within the triangle and then subtracting all the floating points to be left with only the integer points; a less elegant problem).
Assuming the vertices are at integer coordinates, you can get the answer by constructing a rectangle around the triangle as explained in Kyle Schultz's An Investigation of Pick's Theorem.
For a j x k rectangle, the number of interior points is
I = (j – 1)(k – 1).
For the 5 x 3 rectangle below, there are 8 interior points.
(source: uga.edu)
For triangles with a vertical leg (j) and a horizontal leg (k) the number of interior points is given by
I = ((j – 1)(k – 1) - h) / 2
where h is the number of points interior to the rectangle that are coincident to the hypotenuse of the triangles (not the length).
(source: uga.edu)
For triangles with a vertical side or a horizontal side, the number of interior points (I) is given by
(source: uga.edu)
where j, k, h1, h2, and b are marked in the following diagram
(source: uga.edu)
Finally, the case of triangles with no vertical or horizontal sides can be split into two sub-cases, one where the area surrounding the triangle forms three triangles, and one where the surrounding area forms three triangles and a rectangle (see the diagrams below).
The number of interior points (I) in the first sub-case is given by
(source: uga.edu)
where all the variables are marked in the following diagram
(source: uga.edu)
The number of interior points (I) in the second sub-case is given by
(source: uga.edu)
where all the variables are marked in the following diagram
(source: uga.edu)
Pick's theorem (http://en.wikipedia.org/wiki/Pick%27s_theorem) states that the surface of a simple polygon placed on integer points is given by:
A = i + b/2 - 1
Here A is the surface of the triangle, i is the number of interior points and b is the number of boundary points. The number of boundary points b can be calculated easily by summing the greatest common divisor of the slopes of each line:
b = gcd(abs(p0x - p1x), abs(p0y - p1y))
+ gcd(abs(p1x - p2x), abs(p1y - p2y))
+ gcd(abs(p2x - p0x), abs(p2y - p0y))
The surface can also be calculated. For a formula which calculates the surface see https://stackoverflow.com/a/14382692/2491535 . Combining these known values i can be calculated by:
i = A + 1 - b/2
My knee-jerk reaction would be to brute-force it:
Find the maximum and minimum extent of the triangle in the x and y directions.
Loop over all combinations of integer points within those extents.
For each set of points, use one of the standard tests (Same side or Barycentric techniques, for example) to see if the point lies within the triangle. Since this sort of computation is a component of algorithms for detecting intersections between rays/line segments and triangles, you can also check this link for more info.
This is called the "Point in the Triangle" test.
Here is an article with several solutions to this problem: Point in the Triangle Test.
A common way to check if a point is in a triangle is to find the vectors connecting the point to each of the triangle's three vertices and sum the angles between those vectors. If the sum of the angles is 2*pi (360-degrees) then the point is inside the triangle, otherwise it is not.
Ok I will propose one algorithm, it won't be brilliant, but it will work.
First, we will need a point in triangle test. I propose to use the "Barycentric Technique" as explained in this excellent post:
http://www.blackpawn.com/texts/pointinpoly/default.html
Now to the algorithm:
let (x1,y1) (x2,y2) (x3,y3) be the triangle vertices
let ymin = floor(min(y1,y2,y3)) ymax = ceiling(max(y1,y2,y3)) xmin = floor(min(x1,x2,x3)) ymax = ceiling(max(x1,x2,3))
iterating from xmin to xmax and ymin to ymax you can enumerate all the integer points in the rectangular region that contains the triangle
using the point in triangle test you can test for each point in the enumeration to see if it's on the triangle.
It's simple, I think it can be programmed in less than half hour.
I only have half an answer for a non-brute-force method. If the vertices were integer, you could reduce it to figuring out how to find how many integer points the edges intersect. With that number and the area of the triangle (Heron's formula), you can use Pick's theorem to find the number of interior integer points.
Edit: for the other half, finding the integer points that intersect the edge, I suspect that it's the greatest common denominator between the x and y difference between the points minus one, or if the distance minus one if one of the x or y differences is zero.
Here's another method, not necessarily the best, but sure to impress any interviewer.
First, call the point with the lowest X co-ord 'L', the point with the highest X co-ord 'R', and the remaining point 'M' (Left, Right, and Middle).
Then, set up two instances of Bresenham's line algorithm. Parameterize one instance to draw from L to R, and the second to draw from L to M. Run the algorithms simultaneously for X = X[L] to X[M]. But instead of drawing any lines or turning on any pixels, count the pixels between the lines.
After stepping from X[L] to X[M], change the parameters of the second Bresenham to draw from M to R, then continue to run the algorithms simultaneously for X = X[M] to X[R].
This is very similar to the solution proposed by Erwin Smout 7 hours ago, but using Bresenham instead of a line-slope formula.
I think that in order to count the columns of pixels, you will need to determine whether M lies above or below the line LR, and of course special cases will arise when two points have the same X or Y co-ordinate. But by the time this comes up, your interviewer will be suitably awed and you can move on to the next question.
Quick n'dirty pseudocode:
-- Declare triangle
p1 2DPoint = (x1, y1);
p2 2DPoint = (x2, y2);
p3 2DPoint = (x3, y3);
triangle [2DPoint] := [p1, p2, p3];
-- Bounding box
xmin float = min(triangle[][0]);
xmax float = max(triangle[][0]);
ymin float = min(triangle[][1]);
ymax float = max(triangle[][1]);
result [[float]];
-- Points in bounding box might be inside the triangle
for x in xmin .. xmax {
for y in ymin .. ymax {
if a line starting in (x, y) and going in any direction crosses one, and only one, of the lines between the points in the triangle, or hits exactly one of the corners of the triangle {
result[result.count] = (x, y);
}
}
}
I have this idea -
Let A(x1, y1), B(x2, y2) and C(x3, y3) be the vertices of the triangle. Let 'count' be the number of integer points forming the triangle.
If we need the points on the triangle edges then using Euclidean Distance formula http://en.wikipedia.org/wiki/Euclidean_distance, the length of all three sides can be ascertained.
The sum of length of all three sides - 3, would give that count.
To find the number of points inside the triangle we need to use a triangle fill algorithm and instead of doing the actual rendering i.e. executing drawpixel(x,y), just go through the loops and keep updating the count as we loop though.
A triangle fill algorithm from
Fundamentals of Computer Graphics by
Peter Shirley,Michael Ashikhmin
should help. Its referred here http://www.gidforums.com/t-20838.html
cheers
I'd go like this :
Take the uppermost point of the triangle (the one with the highest Y coordinate). There are two "slopes" starting at that point. It's not the general solution, but for easy visualisation, think of one of both "going to the left" (decreasing x coordinates) and the other one "going to the right".
From those two slopes and any given Y coordinate less than the highest point, you should be able to compute the number of integer points that appear within the bounds set by the slopes. Iterating over decreasing Y coordinates, add all those number of points together.
Stop when your decreasing Y coordinates reach the second-highest point of the triangle.
You have now counted all points "above the second-highest point", and you are now left with the problem of "counting all the points within some (much smaller !!!) triangle, of which you know that its upper side parallels the X-axis.
Repeat the same procedure, but now with taking the "leftmost point" instead of the "uppermost", and with proceedding "by increasing x", instead of by "decreasing y".
After that, you are left with the problem of counting all the integer points within a, once again much smaller, triangle, of which you know that its upper side parallels the X-axis, and its left side parallels the Y-axis.
Keep repeating (recurring), until you count no points in the triangle you're left with.
(Have I now made your homework for you ?)
(wierd) pseudo-code for a bit-better-than-brute-force (it should have O(n))
i hope you understand what i mean
n=0
p1,p2,p3 = order points by xcoordinate(p1,p2,p3)
for int i between p1.x and p2.x do
a = (intersection point of the line p1-p2 and the line with x==i).y
b = (intersection point of the line p1-p3 and the line with x==i).y
n += number of integers between floats (a, b)
end
for i between p2.x+1 and p3.x do
a = (intersection point of the line p2-p3 and the line with x==i).y
b = (intersection point of the line p1-p3 and the line with x==i).y
n += number of integers between floats (a, b)
end
this algorithm is rather easy to extend for vertices of type float (only needs some round at the "for i.." part, with a special case for p2.x being integer (there, rounded down=rounded up))
and there are some opportunities for optimization in a real implementation
Here is a Python implementation of #Prabhala's solution:
from collections import namedtuple
from fractions import gcd
def get_points(vertices):
Point = namedtuple('Point', 'x,y')
vertices = [Point(x, y) for x, y in vertices]
a, b, c = vertices
triangle_area = abs((a.x - b.x) * (a.y + b.y) + (b.x - c.x) * (b.y + c.y) + (c.x - a.x) * (c.y + a.y))
triangle_area /= 2
triangle_area += 1
interior = abs(gcd(a.x - b.x, a.y - b.y)) + abs(gcd(b.x - c.x, b.y - c.y)) + abs(gcd(c.x - a.x, c.y - a.y))
interior /= 2
return triangle_area - interior
Usage:
print(get_points([(-1, -1), (1, 0), (0, 1)])) # 1
print(get_points([[2, 3], [6, 9], [10, 160]])) # 289
I found a quite useful link which clearly explains the solution to this problem. I am weak in coordinate geometry so I used this solution and coded it in Java which works (at least for the test cases I tried..)
Link
public int points(int[][] vertices){
int interiorPoints = 0;
double triangleArea = 0;
int x1 = vertices[0][0], x2 = vertices[1][0], x3 = vertices[2][0];
int y1 = vertices[0][1], y2 = vertices[1][1], y3 = vertices[2][1];
triangleArea = Math.abs(((x1-x2)*(y1+y2))
+ ((x2-x3)*(y2+y3))
+ ((x3-x1)*(y3+y1)));
triangleArea /=2;
triangleArea++;
interiorPoints = Math.abs(gcd(x1-x2,y1-y2))
+ Math.abs(gcd(x2-x3, y2-y3))
+ Math.abs(gcd(x3-x1, y3-y1));
interiorPoints /=2;
return (int)(triangleArea - interiorPoints);
}