I have single API to test and I want achieve 30K TPS with this API. Can any body explain me fully how to test this with Jmeter ?
It may be with 20 , 40 or 60 Users but I want to acheive this using Jmeter UI mode?
Your question is way too broad.
Anyway, the simple and straight answer is that you may not be able to achieve this in the UI mode and you may require multiple slaves. If your API has an SLA of 1 second, a single thread executing with 1 second pacing will result in 3600 transactions in an hour (1 TPS). So, you will require 30,000 threads in JMeter to achieve 30,000 TPS.
JMeter GUI isn't for Load Testing rather the test plan debugging purpose only. GUI is very resource intensive and consumes a lot of memory. It is better and highly suggested to perform load testing in Non-GUI mode.
When you run your JMeter in GUI mode you will see this:
As 30K TPS is too high and to test this you have to give enough number of threads. To calculate how many threads you need for this test, you also need to know the API's max response time.
Here is the formula for thread number calculations:
TPS* max response time in second
For example, if you have response time 1 second, then to generate 30K TPS you need 30K threads. If API's response time is 500ms, then you need at least 15K threads.
To generate this high load, you also need to go for Distributed Testing, cause you won't be able to generate such a high load from a single machine. To determine how many threads you can generate from a single machine, you also need to test this yourself. Try to gradually increase the thread number and monitor the machine's health. If it consumes 70-80% of your machine's health (CPU, Memory, Disk), then stop the test and mark the number of threads. Now you can assume how many machines you need to test this scenario.
Finally, I suggest you to double check your test requirements because 30K TPS (108000000 requests per hour) is too high!
See Apache JMeter's Best Practices for more.
Related
I have to achieve tps of around 2000 in jmeter but able to get around 1000 tried following things -
-Increasing the config
-Distributed Load Testing
-Increasing heap memory
-Increasing or keeping the threads as per the standard formula(followed jmeter best practices)
is there any other way I can do this?
Normally in order to get more throughput you need to add more threads (virtual users) in the Thread Group
If you cannot add more threads due to lack of resources (CPU, RAM, etc.) - consider switching to Distributed Testing
Of course the system under test must be able to respond fast enough because if the application you're testing isn't capable of serving more than 1000 requests per second - you won't be able to get more unless you identify and fix the bottleneck
I am using Jmeter for load testing and I'm new to this. I have an API where I want to send around 36000 requests in a given time, which is- 5 minutes. What should be the configuration of threads, ramp-up time, loop-count, and constant throughput timer for this scenario?
I am using the following configurations, but I am unable to reach the decided RPS-
Thread- 1000
Ramp-up- 5 Minute
loop-count 36
constant throughput timer- 7200
Where is my configuration wrong?
You can try to reduce the ramp-up period to be close to zero and increase the number of loops to "infinite", the total number of requests can be limited using Throughput Controller
In general there could be 2 main reasons of not being able to conduct the required load:
JMeter cannot produce the desired number of hits per second. Things to try:
Make sure to follow JMeter Best Practices
Increase number of threads in Thread Group
Consider switching to Distributed Testing mode
Application cannot handle that many requests per second. Things to try:
Inspect configuration and make sure it's suitable for high loads
Inspect CPU, RAM, Disk, etc. usage during the load test, it might be simply lack of resources, it can be done using JMeter PerfMon Plugin
Re-run your test with profiler tool telemetry enabled
Raise a ticket as it is a performance bottleneck
I'm using jmeter to generate a performance test, to keep things short and straight i read the initial data from a json file, i have a single thread group in which after reading the data i randomize certain values to prevent data duplication when i need it, then i'm passing the final data to the endpoint using variables, this will end up in a json body that is recieved by the endpoint and it will basically generate a new transaction in the database. Also i added a constant timer to add a 7 seconds delay between requests, with a test duration of 10 minutes and no ramp up, i calculated the requests per second like this:
1 minute has 60 seconds and i have a delay of 7 seconds per request then it's logical to say that every minute i'm sending approximately 8.5 requests per minute, this is my calculation (60/7) = 8.5 now if the test lasts for 10 minutes then i multiply (8.5*10) = 85 giving me a total of 85 transactions in 10 minutes, so i should be able to see that exact same amount of transactions created in the database after the test completes.
This is true when i'm running 10-20-40 users, after the load test run i query the db and i get the exact same number of transaction however, as i increase the users in the thread group this doesn't happen anymore, for example if i set 1000 users i should be able to generate 8500 transactions in 10 minutes, but this is not the case, the db only creates around 5.1k transactions.
What is happening, what is wrong? Why it initially works as expected and as i increase the users it doesn't? I can provide more information if needed. Please help.
There could be 2 possible reasons for this:
You discovered your application bottleneck. When you add more users the application response time increases therefore throughput decreases. There is a term called saturation point which stands for the maximum performance of the system, if you go beyond this point - the system will respond slower and you will get less TPS than initially. From the application under test side you should take a look into the following areas:
It might be the case your application simply lacks resources (CPU, RAM, Network, etc.), make sure that it has enough headroom to operate using i.e. JMeter PerfMon Plugin
Your application middleware (application server, database, load balancer, etc.) are not properly set up for the high loads. Identify your application infrastructure stack and make sure to follow performance tuning guidelines for each component
It is also possible that your application code needs optimization, you can detect the most time/resource consuming functions, largest objects, slowest DB queries, idle times, etc. using profiling tools
JMeter is not sending requests fast enough
Just like for the application under test check that JMeter machine(s) have enough resources (CPU, RAM, etc.)
Make sure to follow JMeter Best Practices
Consider going for Distributed Testing
Can you please check once CPU and Memory utilization(RAM and java heap utilization) of jmeter load generator while running jemter for 1000 users? If it is higher or reaching to max then it may affect requests/sec. Also just to confirm requests/sec from Jmeter side, can you please add listener in Jmeter script to track Hit/sec or TPS?
This will also be true(8.5K requests in 10 mins test duration) if your API response time is 1 second and also you have provided enough ramp-up time for those 1000 users.
So possible reason is:
You did not provide enough ramp-up time for 1000 users.
Your API average response time is more than 1 second while you performing tests for 1000 users.
Possible workarounds:
First, try to measure the API response time for 1 user.
Then calculate accordingly that how many users you need to reach 8500 requests in 10 mins. Use this formula:
TPS* max response time in second
Give proper ramp-up time for 1000 users. Check this thread to understand how you should calculate ramp-up time.
Check that your load generator is able to generate 1000 users without any memory or health (i.e CPU usage) issues. If requires, try to use distributed architecture.
Hellow
Which is the maximun number of virtual users that can be testet at a Jmeter distributed test? Is it possible to reach one million of virtual users?
Thak you.
It depends on may factors, technically the limit on JMeter end is very high (I think it should be 231 − 1 or 2 147 483 647 virtual users)
Nature of your application: use cases, is it more about consuming ore creating content, average request and response size, response time, etc.
Nature of your test: again, request and response size, need to use pre/post processors and assertions
Hardware specifications of your load generators
Number of load generators
So I would recommend the following approach:
Start with a single JMeter instance
Make sure you have optimal JMeter configuration and amended your test according to JMeter best practices
Make sure you have monitoring of baseline OS health metrics on that machine
Start with 1 virtual users and gradually increase the number of running users until you start running out of hardware resources (CPU or RAM or Network or Disk IO will be close to maximum)
Mind the number of active users at this stage (you can use i.e. Active Threads Over Time listener) - this is how many users you can simulate for particularly that test scenario. Note, the number might be different for other application or other test scenario.
Multiply the number you get by the number of the load generators you have - if there is > 1M - you are good to go.
If you won't be able to simulate that many users there is a workaround, but personally I don't really like it. The idea is that real users don't hammer application non-stop, they need some time to "think" between actions. Normally you should be simulating these "think times"using JMeter Timers. But if you lack load generators you can consider the following:
Given 1 virtual user needs 15 seconds to think between operations and response time of your application is 5 seconds, it means that each user will be able to execute only 3 requests per minute. So 1M of users will execute 3M requests per minute which gives us 50 000 requests per second which is also high, but more likely to be achievable.
while performance testing an application, i was unable to proceed further of handling large number of threads using JMeter, so, i would like to know the max number of threads that are allowed in Jmeter, Is jmeter capable of handling 1,50,000 threads?
There is no upper limit, it strongly depends on what your test is doing, what is response size, etc.
Also keep in mind that real users don't hammer the application nonstop, they need some time to "think" between operations plus they have to wait for response before they start "thinking" about next action.
For example, given users "think" for 10 seconds and response time is 2 seconds it means that each virtual user will execute 5 requests per minute.
In above scenario 1 50 000 users will execute 7 50 000 requests per minute - which is 12 500 requests per second - > 10x times less users to simulate.
So:
first of all make sure that your JMeter configuration is optimal, default settings are good for tests development and debugging but not very good for the load test execution. You need to
tune Java parameters (Heap size, GC, etc.)
disable all listeners
make sure that you have only those assertions and post processors which are absolutely required
you store only those metrics you need and you don't save any excessive results, especially response data
See 9 Easy Solutions for a JMeter Load Test “Out of Memory” Failure article for above points comprehensive explanation and some more tips
Even given you apply above tweaks I don't think you'll be able to conduct the load of 1 50 000 users from a single host (unless you have a supercomputer in your QA Lab) so I expect you'll need to consider JMeter Distributed Testing when one master machine orchestrates multiple load generators aka "slaves" acting as a single instance - this way you will be able to increase the load by factor equal to number of slaves
Yes Of course, it depends a lot on the machine running Jmeter, but if mileage counts I can give you some hints.
JMeter allows you to run multiple processes in the same box, and it's usually pretty reliable generating up to 200-300 threads per JMeter instance. If you need more than that, I'd recommend using multiple JMeter instances
Use below link for better description how Jmeter can handle 1,50,000 threads of multiple instances
https://blazemeter.com/blog/how-run-load-test-50k-concurrent-users