I'm still new to the shell and need some help.
I have a file stapel_old.
Also I have in the same directory files like english_old_sync, math_old_sync and vocabulary_old_sync.
The content of stapel_old is:
english
math
vocabulary
The content of e.g. english is:
basic_grammar.md
spelling.md
orthography.md
I want to manipulate all files which are given in stapel_old like in this example:
take the first line of stapel_old 'english', (after that math, and so on)
convert in this case english to english_old_sync, (or after that what is given in second line, e.g. math to math_old_sync)
search in english_old_sync line by line for the pattern '.md'
And append to each line after .md :::#a1
The result should be e.g. of english_old_sync:
basic_grammar.md:::#a1
spelling.md:::#a1
orthography.md:::#a1
of math_old_sync:
geometry.md:::#a1
fractions.md:::#a1
and so on. stapel_old should stay unchanged.
How can I realize that?
I tried with sed -n, while loop (while read -r line), and I'm feeling it's somehow the right way - but I still get errors and not the expected result after 4 hours inspecting and reading.
Thank you!
EDIT
Here is the working code (The files are stored in folder 'olddata'):
clear
echo -e "$(tput setaf 1)$(tput setab 7)Learning directories:$(tput sgr 0)\n"
# put here directories which should not become flashcards, command: | grep -v 'name_of_directory_which_not_to_learn1' | grep -v 'directory2'
ls ../ | grep -v 00_gliederungsverweise | grep -v 0_weiter | grep -v bibliothek | grep -v notizen | grep -v Obsidian | grep -v z_nicht_uni | tee olddata/stapel_old
# count folders
echo -ne "\nHow much different folders: " && wc -l olddata/stapel_old | cut -d' ' -f1 | tee -a olddata/stapel_old
echo -e "Are this learning directories correct? [j ODER y]--> yes; [Other]-->no\n"
read lernvz_korrekt
if [ "$lernvz_korrekt" = j ] || [ "$lernvz_korrekt" = y ];
then
read -n 1 -s -r -p "Learning directories correct. Press any key to continue..."
else
read -n 1 -s -r -p "Learning directories not correct, please change in line 4. Press any key to continue..."
exit
fi
echo -e "\n_____________________________\n$(tput setaf 6)$(tput setab 5)Found cards:$(tput sgr 0)$(tput setaf 6)\n"
#GET && WRITE FOLDER NAMES into olddata/stapel_old
anzahl_zeilen=$(cat olddata/stapel_old |& tail -1)
#GET NAMES of .md files of every stapel and write All to 'stapelname'_old_sync
i=0
name="var_$i"
for (( num=1; num <= $anzahl_zeilen; num++ ))
do
i="$((i + 1))"
name="var_$i"
name=$(cat olddata/stapel_old | sed -n "$num"p)
find ../$name/ -name '*.md' | grep -v trash | grep -v Obsidian | rev | cut -d'/' -f1 | rev | tee olddata/$name"_old_sync"
done
(tput sgr 0)
I tried to add:
input="olddata/stapel_old"
while IFS= read -r line
do
sed -n "$line"p olddata/stapel_old
done < "$input"
The code to change only the english_old_sync is:
lines=$(wc -l olddata/english_old_sync | cut -d' ' -f1)
for ((num=1; num <= $lines; num++))
do
content=$(sed -n "$num"p olddata/english_old_sync)
sed -i "s/"$content"/""$content":::#a1/g"" olddata/english_old_sync
done
So now, this need to be a inner for-loop, of a outer for-loop which holds the variable for english, right?
stapel_old should stay unchanged.
You could try a while + read loop and embed sed inside the loop.
#!/usr/bin/env bash
while IFS= read -r files; do
echo cp -v "$files" "${files}_old_sync" &&
echo sed '/^.*\.md$/s/$/:::#a1/' "${files}_old_sync"
done < olddata/staple_old
convert in this case english to english_old_sync, (or after that what is given in second line, e.g. math to math_old_sync)
cp copies the file with a new name, if the goal is renaming the original file name from the content of the file staple_old then change cp to mv
The -n and -i flag from sed was ommited , include it, if needed.
The script also assumes that there are no empty/blank lines in the content of staple_old file. If in case there are/is add an addition test after the line where the do is.
[[ -n $files ]] || continue
It also assumes that the content of staple_old are existing files. Just in case add an additional test.
[[ -e $files ]] || { printf >&2 '%s no such file or directory.\n' "$files"; continue; }
Or an if statement.
if [[ ! -e $files ]]; then
printf >&2 '%s no such file or directory\n' "$files"
continue
fi
See also help test
See also help continue
Combining them all together should be something like:
#!/usr/bin/env bash
while IFS= read -r files; do
[[ -n $files ]] || continue
[[ -e $files ]] || {
printf >&2 '%s no such file or directory.\n' "$files"
continue
}
echo cp -v "$files" "${files}_old_sync" &&
echo sed '/^.*\.md$/s/$/:::#a1/' "${files}_old_sync"
done < olddata/staple_old
Remove the echo's If you're satisfied with the output so the script could copy/rename and edit the files.
file=$2
isHeader=$true
while read -r line;
do
if [ $isHeader ]
then
sed "1i$line",\"BATCH_ID\"\n >> $file
else
sed "$line,1"\a >> $file
fi
isHeader=$false
done < $1
echo $file
In the first line I want to append a string and to the others lines I want to append the same string for the rest of the lines. I tried this but it doesn't work. I don't have any ideas, can somebody help me please?
Not entirely clear to me what you want to do, but if you simply want to append text at the end of each line, use echo in place of sed:
file=$2
isHeader=1
while read -r line;
do
if [ $isHeader ]
then
#sed "1i$line",\"BATCH_ID\"\n >> $file
echo "${line},\"BATCH_ID\"\n" > $file
else
#sed "$line,1"\a >> $file
echo "${line},1\a" >> $file
fi
isHeader=0
done < $1
cat $file
The accepted answer is slightly wrong because echo...\a produces a bell. Also, awk or sed support regular expressions and are 10x faster at line-by-line processing. Here it is in awk:
#! /bin/sh
script='NR == 1 { print $0 ",\"BATCH_ID\"" }
NR > 1 { print $0 ",1" }'
awk "$script" $1 > $2
In sed it's even simpler:
sed '1 s/$/,"BATCH_ID"/; 2,$ s/$/,1/' $1 > $2
To convince yourself of the speed, try this yourself:
$ time seq 100000 | while read f; do echo ${f}foo; done > /dev/null
real 0m2.068s
user 0m1.708s
sys 0m0.364s
$ time seq 100000 | sed 's/$/foo/' > /dev/null
real 0m0.166s
user 0m0.156s
sys 0m0.017s
I'm trying to put together a bash script that will search a bunch of files and if it finds a particular string in a file, it will add a new line on the line after that string and then move on to the next file.
#! /bin/bash
echo "Creating variables"
SEARCHDIR=testfile
LINENUM=1
find $SEARCHDIR* -type f -name *.xml | while read i; do
echo "Checking $i"
ISBE=`cat $i | grep STRING_TO_SEARCH_FOR`
if [[ $ISBE =~ "STRING_TO_SEARCH_FOR" ]] ; then
echo "found $i"
cat $i | while read LINE; do
((LINENUM=LINENUM+1))
if [[ $LINE == "<STRING_TO_SEARCH_FOR>" ]] ; then
echo "editing $i"
awk -v "n=$LINENUM" -v "s=new line to insert" '(NR==n) { print s } 1' $i
fi
done
fi
LINENUM=1
done
the bit I'm having trouble with is
awk -v "n=$LINENUM" -v "s=new line to insert" '(NR==n) { print s } 1' $i
if I just use $i at the end, it will output the content to the screen, if I use $i > $i then it will just erase the file and if I use $i >> $i it will get stuck in a loop until the disk fills up.
any suggestions?
Unfortunately awk dosen't have an in-place replacement option, similar to sed's -i, so you can create a temp file and then remove it:
awk '{commands}' file > tmpfile && mv tmpfile file
or if you have GNU awk 4.1.0 or newer, the -i inplace is added, so you can do:
awk -i inplace '{commands}' file
to modify the original
#cat $i | while read LINE; do
# ((LINENUM=LINENUM+1))
# if [[ $LINE == "<STRING_TO_SEARCH_FOR>" ]] ; then
# echo "editing $i"
# awk -v "n=$LINENUM" -v "s=new line to insert" '(NR==n) { print s } 1' $i
# fi
# done
# replaced by
sed -i 's/STRING_TO_SEARCH_FOR/&\n/g' ${i}
or use awk in place of sed
also
# ISBE=`cat $i | grep STRING_TO_SEARCH_FOR`
# if [[ $ISBE =~ "STRING_TO_SEARCH_FOR" ]] ; then
#by
if [ $( grep -c 'STRING_TO_SEARCH_FOR' ${i} ) -gt 0 ]; then
# if file are huge, if not directly used sed on it, it will be faster (but no echo about finding the file)
If you can, maybe use a temporary file?
~$ awk ... $i > tmpfile
~$ mv tmpfile $i
Or simply awk ... $i > tmpfile && mv tmpfile $i
Note that, you can use mktemp to create this temporary file.
Otherwise, with sed you can insert a line right after a match:
~$ cat f
auie
nrst
abcd
efgh
1234
~$ sed '/abcd/{a\
new_line
}' f
auie
nrst
abcd
new_line
efgh
1234
The command search if the line matches /abcd/, if so, it will append (a\) the line new_line.
And since sed as the -i to replace inline, you can do:
if [[ $ISBE =~ "STRING_TO_SEARCH_FOR" ]] ; then
echo "found $i"
echo "editing $i"
sed -i "/STRING_TO_SEARCH_FOR/{a
\new line to insert
}" $i
fi
After writing some unix scripts I am able to manage to get data from different xml files to csv format and now I got stuck with the following problem
file1.csv : contains
1,5,6,7,8
2,3,4,5,9
1,6,10,11,12
1,5,11,12
file2.csv : contains
1,Mango,Tuna,Webby,Through,Franky,Sam,Sumo
2,Franky
3,Sam
4,Sumo
5,Mango,Tuna,Webby
6,Tuna,Webby,Through
7,Through,Sam,Sumo
8,Nothing
9,Sam,Sumo
10,Sumo,Mango,Tuna
11,Mango,Tuna,Webby,Through
12,Mango,Tuna,Webby,Through,Franky
output I want is
1,5,6,7,8
Mango,Tuna,Webby,Through,Franky,Sam,Sumo
Mango,Tuna,Webby
Tuna,Webby,Through
Through,Sam,Sumo
Nothing
Common word:None
2,3,4,5,9
Franky
Sam
Sumo
Mango,Tuna,Webby
Sam, Sumo
Common Word:None
1,6,10,11,12
Mango,Tuna,Webby,Through,Franky,Sam,Sumo
Tuna,Webby,Through
Sumo,Mango,Tuna
Mango,Tuna,Webby,Through
Mango,Tuna,Webby,Through,Franky
Common word: Tuna
1,5,11,12
Mango,Tuna,Webby,Through,Franky,Sam,Sumo
Mango,Tuna,Webby
Mango,Tuna,Webby,Through
Mango,Tuna,Webby,Through,Franky
Common word: Mango,Tuna,Webby
I apprecaite any help.
Thanks
I got some solution but not complete
##!/bin/bash
count=1
count_2=1
for i in `cat file1.csv`
do
echo $i > $count.txt
cat $count.txt | tr "," "\n" > $count_2.txt
count=`expr $count + 1`
count_2=`expr $count_2 + 1`
done;
#this code will create separte files for each line in file1.csv,
bash file3_search.sh
##########################
file3_search.sh
================
##!/bin/bash
cat file2.csv | sed '/^$/d' | sed 's/[ ]*$//' > trim.txt
dos2unix -q 1.txt 1.txt
dos2unix 2.txt 2.txt
dos2unix 3.txt 3.txt
echo "1st Combination results"
for i in `cat 1.txt`
do
cat trim.txt | egrep -w $i
done > Combination1.txt;
echo "2nd Combination results"
for i in `cat 2.txt`
do
cat trim.txt | egrep -w $i
done > Combination2.txt;
echo "3rd Combination results"
for i in `cat 3.txt`
do
cat trim.txt | egrep -w $i
done > Combination3.txt;
Guys I am not good at programming (I am software tester) please someone can re-factor my code and also please tell me how to get the common word in those Combination.txt file
IMHO it works:
for line in $(cat 1.csv) ; do
echo $line ;
grepline=`echo $line | sed 's/ \+//g;s/,/,|/g;s/^\(.*\)$/^(\1,)/'`;
egrep $grepline 2.csv
egrep $grepline 2.csv | \
awk -F "," '
{ for (i=2;i<=NF;i++)
{s[$i]+=1}
}
END { for (key in s)
{if (s[key]==NR) { tp+=key "," }
}
if (tp!="") {print "Common word(s): " gensub(/,$/,"","g",tp)}
else {print "Common word: None"}}'
echo
done
HTH
Here's an answer for you. It depends on associative array capabilities of bash version 4:
IFS=,
declare -a words
# read and store the words in file2
while read line; do
set -- $line
n=$1
shift
words[$n]="$*"
done < file2.csv
# read file1 and process
while read line; do
echo "$line"
set -- $line
indexes=( "$#" )
NF=${#indexes[#]}
declare -A common
for (( i=0; i<$NF; i++)); do
echo "${words[${indexes[$i]}]}"
set -- ${words[${indexes[$i]}]}
for word; do
common[$word]=$(( ${common[$word]} + 1))
done
done
printf "Common words: "
n=0
for word in "${!common[#]}"; do
if [[ ${common[$word]} -eq $NF ]]; then
printf "%s " $word
(( n++ ))
fi
done
[[ $n -eq 0 ]] && printf "None"
unset common
printf "\n\n"
done < file1.csv
Hey every one! I am pretty new for shell script and I am stuck
I need to extract information regarding: file_name && size && time && row_count and I want it do in one command line. I tried like this :
ls -l * && wc -l file.txt && du -ks file.txt | cut -f1| awk '{print $5" " $6 " " $7 " "$8 " " $9 " "$1 " "$2}'
but is not working properly
I also tried do in loop but i dont know how extract from there
for file in `ls -ltr /export/home/oracle/dbascripts/scripts`
do
[[ -f $file ]] && echo $file | awk '{print $3}'
done
Then I want to redirect to file like this >> for sql loader purpose.
Thanks in advance!
This could be a start if you have GNU find and GNU coreutils (most Linux distribution will do):
for i in /my/path/*; do
find "$i" ! -type d -printf '%p %TY-%Tm-%Td %TH:%TM:%TS %s '
wc -l <"$i"
done
/my/path/* should be modified to reflect the files you want to probe.
Also keep in mind that this one-liner has a few major issues if any directories are specified. This should be safer in that regard:
for i in *; do
if [[ -d "$i" ]]; then
continue
fi
find "$i" -printf '%p %TY-%Tm-%Td %TH:%TM:%TS %s '
wc -l <"$i"
done
You will want to see the manual page for GNU find to understand this better.
EDIT:
There is at least other faster way, using join and bash process substitution, but it's a bit ugly and somewhat harder to make safe and work the kinks out of.
ExtractInformation()
{
timesep="-"
sep="|"
dot=":"
sec="00"
lcount=`wc -l < $fname`
modf_time=`ls -l $fname`
f_size=`echo $modf_time | awk '{print $5}'`
time_month=`echo $modf_time | awk '{print $6}'`
time_day=`echo $modf_time | awk '{print $7}'`
time_hrmin=`echo $modf_time | awk '{print $8}'`
time_hr=`echo $time_hrmin | cut -d ':' -f1`
time_min=`echo $time_hrmin | cut -d ':' -f2`
time_year=`date '+%Y'`
time_param="DD-MON-YYYY HH24:MI:SS"
time_date=$time_day$timesep$time_month$timesep$time_year" "$time_hrmin$dot$sec
result=$fname$sep$time_date$sep$f_size$sep$lcount$sep$time_param
sqlresult=`echo $result | awk '{FS = "|" ;q=sprintf("%c", 39); print "INSERT INTO SIP_ICMS_FILE_T(f_name, f_date_time,f_size,f_row_count) VALUES (" q $1 q ", TO_DATE("q $2 q,q $5 q "),"$3","$4");";}'`
echo $sqlresult>>data.sql
echo "Reading data....."
}
UploadData()
{
#ss=`sqlplus -s a/a#adb #data.sql
#set serveroutput on
#set feedback off
#set echo off`
echo "loading with sql Loader....."
}
f_data=data.sql
[[ -f $f_data ]] && rm data.sql
for fname in * ;
do
if [[ -f $fname ]] then
ExtractInformation
fi
UploadData
#Zipdata
done