I have 3 columns with values like:
projectid disttid cardno
6 3 17422117
I want merge these 3 columns into 1 column like:
projectid disttid cardno new_column
6 3 17422117 00600317422117
I tried with this query but LPAD function did not insert 2 zeros from start
select LPAD(projectid,3,'0')||LPAD(disttid,3,'0')||max(cardno)+1 "NEW_URN"
from we_group_hof_k
where urn like '006%'
group by projectid,disttid;
This query gives this result:
600317422117
Please update the query as shown below and check.Hope this works.
select LPAD(projectid,3,'0')||LPAD(disttid,3,'0')||to_char(max(cardno)+1) "NEW_URN"
from we_group_hof_k
where urn like '006%'
group by projectid,disttid;
Related
Here i want to fetch results based on the maximum date from the field so in order to get that i wrote query like this
$latest_reports = Filelist::
select('report_type_id',DB::raw('filename,max(data_date) as latest_date'))
->where('access_id','=',$retailer_supplier_id->id)
->groupBy('report_type_id')
->orderBy('data_date','desc')
->get();
Here is my table please have a look
id access_id filename report_type_id data_date
1 16 filename1 6 2021-02-01
2 16 filename2 6 2021-01-01
3 16 filename3 6 2021-03-01
4 16 filename4 6 2021-04-01
Am getting result like this
id access_id filename report_type_id data_date
4 16 filename1 6 2021-04-01
I want to get result like this
id access_id filename report_type_id data_date
4 16 filename4 6 2021-04-01
Here the first rows filename value is getting..how to solve this
This is a MySQL problem I think. You have specified only one column to group by, but more then one column in the select list so what is presented in those other non-aggregating columns isn't guaranteed to be sensible. Please refer to MySQL Handling of GROUP BY
In SQL I might re-write the query this way:
select * from mytable
where data_date = (select max(data_date) from mytable)
or
select * from mytable
order by data_date
limit 1
depending on my particular needs (and I don't know which is better for you)
UPDATE:
$latest_reports = Filelist::select([
'report_type_id',
'access_id'
DB::raw('MAX(data_date) AS data_date'),
// here can be listed the other fields
])
->where('access_id', $retailer_supplier_id->id)
->groupBy('report_type_id')
->get();
INITIAL:
I had similar working query, just there I had "created_at" timestamp field. Anyway, I think this will work for you:
// assuming, that your table name is "filelist"
$latest_reports = Filelist::select(DB::raw('t.*'))
->from(DB::raw('(SELECT * FROM filelist ORDER BY data_date DESC) t'))
->groupBy('t.report_type_id')
->get();
I have a query that gets contract_types 1 to 10. This query is being used in an SSRS report to filter out a larger dataset. I am using -1 for nulls and -2 for all.
I would like to know how we would allow multiple values - does oracle concatenate the inputs together so '1,2,3' would be passed in? Say we get select -1,0,1 in SSRS, how could we alter the bottom query to return values?
My query to get ContractTypes:
SELECT
ContractType,
CASE WHEN ContractType = -2 THEN 'All'
WHEN ContractType = -1 THEN'Null'
ELSE to_Char(ContractType)
END AS DisplayFigure
FROM ContractTypes
which returns
ContractType DisplayFig
-1 Null
0 0
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
10 10
This currently is only returning single values or all, not muliple values:
SELECT *
FROM Employee
WHERE NVL(CONTRACT_TYPE, -1) = :contract_type or :contract_type = -2
I'm assuming we want to do something like:
WHERE NVL(CONTRACT_TYPE, -1) IN (:contract_type)
But this doesn't seem to work.
Data in Employee
Name ContractType
Bob 1
Sue 0
Bill Null
Joe 2
In my report, I want to be able to select contract_type as -1(null),0,1 using the 'allow muliple values' checkbox. At the moment, I can only select either 'all' using my -2 value, or single contract types.
My input would be: contract type = -1,1,2
My output would be Bill, Bob, Joe.
This is how I'm executing my code
I use SSRS with Oracle a lot so I see where you're coming from. Thankfully, they work pretty well together.
First make sure the parameter is set to allow multiple values. This adds a Select All option to your dropdown so you don't have to worry about adding a special case for "All". You'll want to make sure the dataset for the parameter has a row with -1 as the Value and a friendly description for the Label.
Next, the WHERE clause would be just as you mentioned:
WHERE NVL(CONTRACT_TYPE, -1) IN (:contract_type)
SSRS automatically populates the values. There is no XML or string manipulation needed. Keep in mind that this will not work with single-value parameters.
If for some reason this still doesn't work as expected in your environment, there is another workaround you can use which is more universal and works even with ODBC connections.
In the dataset parameter properties, use an expression like this to concatenate the values into a single, comma-separated string:
="," + Join(Parameters!Parameter.Value, ",") + ","
Then use an expression like this in your WHERE clause:
where :parameter like '%,' + Column + ',%'
Obviously, this is less efficient because it most likely won't be using an index, but it works.
I don't know SSRS, but - if I understood you correctly, you'll have to split that comma-separated values list into rows. Something like in this example:
SQL> select *
2 from dept
3 where deptno in (select regexp_substr('&&contract_type', '[^,]+', 1, level)
4 from dual
5 connect by level <= regexp_count('&&contract_type', ',') + 1
6 );
Enter value for contract_type: 10,20,40
DEPTNO DNAME LOC
---------- -------------------- --------------------
20 RESEARCH DALLAS
10 ACCOUNTING NEW YORK
40 OPERATIONS BOSTON
SQL>
Applied to your code:
select *
from employee
where nvl(contract_type, -1) in (select regexp_substr(:contract_type, '[^,]+', 1, level)
from dual
connect by level <= regexp_substr(:contract_type, ',') + 1
)
If you have the comma separated list of numbers and then if you like to split it then, the below seems simple and easy to maintain.
select to_number(column_value) from xmltable(:val);
Inputs: 1,2,3,4
Output:
I guess I understood your problem. If I am correct the below should solve your problem:
with inputs(Name, ContractType) as
(
select 'Bob', 1 from dual union all
select 'Sue', 0 from dual union all
select 'Bill', Null from dual union all
select 'Joe', 2 from dual
)
select *
from inputs
where decode(:ContractType,'-2',-2,nvl(ContractType,-1)) in (select to_number(column_value) from xmltable(:ContractType))
Inputs: -1,1,2
Output:
Inputs: -2
Output:
i have problem with this case, i have log table that has many same ID with diferent condition. i want to select two max condition from this. i've tried but it just show one record only, not every record in table.
Here's my records table:
order_id seq status____________________
1256 2 4
1256 1 2
1257 0 2
1257 3 1
Here my code:
WITH t AS(
SELECT x.order_id
,MAX(y.seq) AS seq2
,MAX(y.extern_order_status) AS status
FROM t_order_demand x
JOIN t_order_log y
ON x.order_id = y.order_id
where x.order_id like '%12%'
GROUP BY x.order_id)
SELECT *
FROM t
WHERE (t.seq2 || t.status) IN (SELECT MAX(tt.seq2 || tt.status) FROM t tt);
this query works, but sometime it gave wrong value or just show some records, not every records.
i want the result is like this:
order_id seq2 status____________________
1256 2 4
1257 3 2
I think you just want an aggregation:
select d.order_id, max(l.seq2) as seq2, max(l.status) as status
from t_order_demand d join
t_order_log l
on d.order_id = l.order_id
where d.order_id like '%12%'
group by d.order_id;
I'm not sure what your final where clause is supposed to do, but it appears to do unnecessary filtering, compared to what you want.
The standard SQL aggregate function max() will return the highest value in a group; min() will return the lowest.
Is there an aggregate function in Oracle to return a random value from a group? Or some technique to achieve this?
E.g., given the table foo:
group_id value
1 1
1 5
1 9
2 2
2 4
2 8
The SQL query
select group_id, max(value), min(value), some_aggregate_random_func(value)
from foo
group by group_id;
might produce:
group_id max(value), min(value), some_aggregate_random_func(value)
1 9 1 1
2 8 2 4
with, obviously, the last column being any random value in that group.
You can try something like the following
select deptno,max(sal),min(sal),max(rand_sal)
from(
select deptno,sal,first_value(sal)
over(partition by deptno order by dbms_random.value) rand_sal
from emp)
group by deptno
/
The idea is to sort the values within group in random order and pick the first.I can think of other ways but none so efficient.
You might prepend a random string to the column you want to extract the random element from, and then select the min() element of the column and take out the prepended string.
select group_id, max(value), min(value), substr(min(random_value),11)
from (select dbms_random.string('A', 10)||value random_value,foo.* from foo)
In this way you cand avoid using the aggregate function and specifying twice the group by, which might be useful in a scenario where your query is very complicated / or you are just exploring the data and are entering manually queries with a lengthy and changing list of group by columns.
I have a table called excel that has 3 columns, name, id, and full_name. The name part is the only one I have and I need to fill id and full_name. The other table that contains the data is called tim_pismena and has 2 columns that I need, id and pismeno_name (the actual names are not important, but i'm writing them just for clarity). In pseudooracle code :) the select that gets me the values from the second table would be done something like this:
SELECT tp.id, tp.pismeno_name
FROM tim_pismena tp
WHERE upper(tp.pismeno_name) LIKE IN upper('%(SELECT name FROM excel)%')
and when used with an insert, the end result should be something like
name id full_name
Happy Joe 55 Very fun place Happy Joe, isn't it?
Use merge statement
1 MERGE
2 INTO excel tgt
3 USING tim_pismenae src
4 ON ( upper(src.naziv_pismena) LIKE '%'||upper(tgt.ime)||'%')
5 WHEN MATCHED
6 THEN
7 UPDATE
8 SET tgt.id = src.id
9 , tgt.full_name = src.naziv_pismena
10 WHEN NOT MATCHED
11 THEN
12 INSERT ( tgt.name
13 , tgt.id
14 , tgt.full_name )
15 VALUES ( src.naziv_pismena
16 , src.id
17 , src.naziv_pismena )
18 WHERE (1 <> 1);