What is the value of site name in the following code when we get a error like this as shown
appcmd set config ["SITE_NAME"] /section:system.webServer/directoryBrowse /enabled:true
HTTP Error 403.14 - Forbidden
The Web server is configured to not list the contents of this directory.
Most likely causes:
A default document is not configured for the requested URL, and directory browsing is not enabled on the server.
Things you can try:
If you do not want to enable directory browsing, ensure that a default document is configured and that the file exists.
Enable directory browsing.
Go to the IIS Express install directory.
Run appcmd set config /section:system.webServer/directoryBrowse /enabled:true to enable directory browsing at the server level.
Run appcmd set config ["SITE_NAME"] /section:system.webServer/directoryBrowse /enabled:true to enable directory browsing at the site level.
Verify that the configuration/system.webServer/directoryBrowse#enabled attribute is set to true in the site or application configuration file.
If you are able to use AppCmd, then use AppCmd list sites to dump out all the configured sites. You'll need to select the correct one (if there are more than one) based on the binding information.
You get this error because the website does not have the 'Directory Browsing' feature enabled.
Firstly you need to check that you install directory browsing feature or not.Then you could enable directory browsing by following ways:
Using IIS manager console window:
1)Open Internet Information Services (IIS) Manager.
2)From the Connection Pane select Site name for which you want to enable directory browsing.
3)From Feature View Select Directory Browsing.
4)In the Actions pane, click Enable.
You could also set this by using the command prompt:
1)Open a command prompt as administrator.
2)Run below command:
appcmd set config "urlsample" /section:system.webServer/directoryBrowse /enabled:true
appcmd set config ["SITE_NAME"] /section:system.webServer/directoryBrowse /enabled:true
In ["SITE_NAME"] you need to specify the name of your site which you set in IIS.
You could also set in web.config file under the system.webserver section:
<directoryBrowse enabled="true" />
You could also refer below article for more detail:
Directory Browse
Regards,
Jalpa.
Related
What needs to be done to modify this script to set allowed extensions by the website and not globally.
appcmd set config /section:requestfiltering /+fileExtensions.[fileextension='string',allowed='true | false']
This is how you target individual sites.
appcmd set config "SITE_NAME_HERE" /section:system.webServer/security/requestFiltering /fileExtensions.[fileExtension='.json'].allowed:true
How would I locally enable opcache while developing in a Laravel project within PhpStorm?
Open Run -> Edit Configurations
Create a new configuration by expanding Defaults, then select PHP Built-in Web Server
Set the following values:
Host: localhost
Port: 80
Document root: select the public folder in the project
Check Use router script: and select server.php in Laravel's project root directory
Interpreter options: -d zend_extension=php_opcache.dll -d opcache.enable_cli=1 -d opcache.memory_consumption=128 -d opcache.max_accelerated_files=10000 -d opcache.validate_timestamps=0 -d opcache.save_comments=0
Ensure that you have entered an appropriate name for the configuration (ex. Local - with opcache)
Click Ok
This will cache the PHP scripts when the program is being executed. No invalidation for re-caching occurs with the current configuration. So, now file watchers are needed to detect when changes are made.
Open File -> Settings
Navigate to Tools -> File Watchers
Add a new watcher by clicking on the green plus symbol (+) and select <custom>
From the File type drop-down list, select PHP and set the following values:
Scope: Project Files
Program: php
This will already need to be set in your machine's path environment or you'll need to set the exact file path
Arguments: -d zend_extension=php_opcache.dll -d opcache.enable_cli=1 -r "opcache_reset();"
Expand Advanced Options and make sure all checkboxes are UNCHECKED
All other default values should sufficient
Set a descriptive name for the watcher and click Ok
This watcher will now detect any changes made to PHP files in your project when a manual save is invoked and invalidate the entire cache to be rebuilt.
For blades, repeat the exact same steps immediately above. However, select Blade as the File type (obviously). This ensures those changes are also reflected while developing locally.
Note
This directly replaces the usage of php artisan serve [--port=80]
This assumes that the php_opcache.dll file already exists in your PHP/ext folder. Otherwise, refer to the PHP documentation to get it installed.
These instructions were developed on a Windows environment. However, I'm sure they'd be easily ported over to other OS environments as well.
I know this question has been already asked but it didn't work for me.
When I run the command:
appcmd set config /section:system.webServer/directoryBrowse /enabled:true
I have the following error:
The command appcmd was not found, but does exist in the current location. Windows PowerShell does not load commands from the current location by default.
At his point I don't know what to do. How can I run the command?
I would try it at the site level first, Run with elevated permission i.e. Run as Administrator
Enable directory browsing at the site level
cd "C:\Program Files (x86)\IIS Express\"
run this appcmd.exe set config "Contoso Some SITE NAME" -section:system.webServer/directoryBrowse /enabled:"True" /showFlags:"Date, Time, Size, Extension"
check to turn off encryption and read only in folder options
Note: Run with elevated permission
GUI version from Microsoft site for other versions:
On the Start screen, move the pointer all the way to the lower left
corner, right-click the Start button, and then click Control Panel.
In Control Panel, click Programs and Features, and then click Turn
Windows features on or off.
Expand Internet Information Services,
expand World Wide Web Services, expand Common HTTP Features, and
then select Directory Browsing.
Click OK.
Click Close.
If it still does not work, then try & delete all the IIS cache and repeat the above
I previously answered this, and it works well here for the majority of people
Open CMD prompt & Navigate to IIS express - by typing the following
cd "C:\Program Files (x86)\IIS Express\"
run this appcmd.exe list site /xml | appcmd delete site /in
This will delete all the sites, enjoy!
I have a website template that I uploaded to my ftp server using FileZilla. However when I visit the domain I get the error:
Directory Listing Denied
This Virtual Directory does not allow contents to be listed.
in the console it displays a 403 forbidden error. After researching I recognize that the default web page inside the root directory is not set. All my attempts to set the default page have failed. Here is what I tried:
1) Logged into ftp server with FileZilla. Clicked File > Site Manager > Advanced and set the root directory. The root directory contains a file that says index.html
2) Created a .htaccess file in the root that contains the text "DirectoryIndex index.html"
Solutions involving IIS are welcomed as well.
Any advice on how I can get this fixed?
Unfortunately I did not have permissions to access the actual server files so I contacted the hosting company.
They resolved my issue I believe using the approach #alvits recommended, however they have not returned my request to confirm how they solved it.
Thanks for the support
I was trying to create a scripted installer for P4V.
The port settings, user setting and the workspace name are set as specified in the config file.
But when I open perforce the connection dialog box throws an error "client 'manojpc' unknown".
The following was my configuration file:
set P4PORT=server:2345
set INSTMODE=NoPrompt
set INSTTYPE=ClientOnly
set P4ROOT=$(SystemDrive)\My Depot
set CLNTEXES=$(SystemDrive)\Perforce
set P4USER=username
set p4CLIENT=$(HOSTNAME)
If I specify an already existing workspace, perforce won't allow me to use it in a PC other than the one from which it was created.
So how do I make this work?
Please let me also know if the above settings will set the "C:\My Depot" as the workspace dir.
In your Workspace settings, make the Host: field blank. This will allow you to use the same workspace from any computer.
Do you possibly need to use the p4 client command to set up a workspace before-hand?
http://www.perforce.com/perforce/doc.061/manuals/cmdref/client.html#1040665