I'm aware that there are similar question posted here, but none of them address this specific issue.
How to create an ECS cluster via CLI tools, aws-cli and/or ecs-cli, with using your own custom AMI stored in EC2 as an AMI image?
Is this even possible currently or do I need to turn to CloudFormation?
EDIT: I had a major confusion about the service architecture of ECS in terms of distributing containers on container instances (EC2 instances registered to the cluster).
So the container instance runs on an AMI. Which can be a custom built AMI, but such would needed only in some special circumstances. It's recommended to use an ECS-optimized Amazon Linux AMI by as maintained by AWS and is updated about once a month.
Another confusion point was with Docker Compose approach and the ECS CLI tool. Some experts think that while the ECS CLI is released and maintained by AWS, and being already 3 years old at this point in 2019, it is not suitable for production usage. So am using AWS CLI instead, and dealing with clusters, task definitions, and (task scheduling) services directly.
I would rather run the custom stuff within the container defined by dockerfile on ECS optimized AMI
But to run custom AMI
1) Pre-requisite is to have AMI image with ECS Agent installed
2) Then I would try ecs-cli up command with defined --image-id
ecs-cli up
--keypair <my-keypair>
--launch-type EC2
--size 2
--instance-type t2.micro
--instance-role ECSMediumRole
--vpc <my-vpc>
--image-id ami-XXXXXXXX # Custom Image ID with ECS Agent installed
--cluster-config <my-cluster-config>
--ecs-profile <my-ecs-profile>
--security-group <my-security-group-id>
--region us-east-1
--subnets <my-public-vpc-subnet>
Related
I need to use a specific custom Windows AMI as the base image to build an AMI to be used by EKS worker nodes. How do I do that?
Is there a way to view/monitor AWS Sagemaker's usage of EC2 instances?
I am running a Sagemaker endpoint and tried to find its instances (ml.p3.2xlarge in this case) in the EC2 UI, but couldn't find them.
ml EC2 instances do not appear in the EC2 console. You can find their metrics in Cloudwatch though, and create dashboards to monitor what you need:
I am confused about how Service AutoScaling automately works. Will it create EC2 instance automately?
I create it and add it to a Cluster's service, but it does no create EC2 for placing my required number of tasks. Is any thing wrong with my settings? I check the [Events] and see "service s2 was unable to place a task because no container instance met all of its requirements. ", but shouldn't it create a EC2 if no instance met? Please give me some advice, thanks in advance.
but shouldn't it create a EC2 if no instance met
Not really. There are two types of scaling policies: scaling policies on an ECS service and scaling policies on the ECS cluster. Instances are added based on cluster scaling policies, and that's what you should set up in addition to your service scaling policy.
AWS has a couple of detailed tutorials on scaling ECS clusters:
https://aws.amazon.com/blogs/compute/automatic-scaling-with-amazon-ecs/
https://docs.aws.amazon.com/AmazonECS/latest/developerguide/cloudwatch_alarm_autoscaling.html
AWS Elastic Container Services has two methods to deploy containers over aws environment
Where you no need to worry about orchestration of containers (task in aws)
Fargate (Available in few regions like N.Virginia)
Using EC2 in ECS
I guess you are using 2nd option to deploy application over ECS where you can provide details of scaling tasks/containers not ec2 instances.
For Auto-scaling of ec2 instances you should look into ASG of AWS.
As far as AWS ECS is concerned you need some building blocks which are as follows-
Cluster
Task definition (Memory, Network and Storage configs of tasks)
Service contains EC2 instance configuration
Auto scaling policies if you want to auto-scale tasks
I have created my own EC2 instance in AWS. That AMI is AWS ECS optimized AMI for launching ecs service from my EC2 instance. I previously discussed the same thing. And tried with that approach. The link is below,
Microservice Deployment Using AWS ECS Service
I created my cluster and configured that cluster name when I am creating optimized AMI by following code snippet in advanced userdata section,
#!/bin/bash
echo ECS_CLUSTER=your_cluster_name >> /etc/ecs/ecs.config
I followed the documentation of cluster creation from following link,
https://docs.aws.amazon.com/AmazonECS/latest/developerguide/create_cluster.htmlecs
But, no result - when creating cluster and ECS task definitions it creates and launches into one EC2. And again creating another EC2 by specifying above code. So total 2 Ec2. I already created my own ECS optimized.
I am finding for launching ECS service from my own AMI (that I created). Actually I need to launch my ECS service from my Ec2 (I had created my machine Amazon optimized AMI).
The reason behind this requirement is I don't want to launch my services in machine that owned by others. I need to launch from my machine. And also I need to host my angular application in the same my machine. So I need control of my machine. How can I do this?
Sounds like you just need to create a Launch Configuration. With this you can specify the User Data settings that should be applied when a host is setup.
After you create your Launch Configuration, create a new Auto Scaling Group based off of it (there's a drop-down to select the launch configuration you want to use).
From here, any new instances launched under that ASG will apply the settings you've configured in the associated Launch Configuration.
In all tutorials for ECS you need to create a cluster and after that an autoscaling group, that will spawn instances. Somehow in all these tutorials the instances magically show up in the cluster, but noone gives a hint what's connecting the autoscaling group and the cluster.
my autoscaling group spawns instances as expected, but they just dont show up on my ecs cluster, who holds my docker definitions.
Where is the connection I'm missing?
I was struggling with this for a while. The key to getting the instances in the autoscaling group associated with your ECS cluster is in the user data. When you are creating your launch config when you get to step 3 "Configure Details" hit the advanced tab and enter a simple bash script like the following for your user data.
#!/usr/bin/env bash
echo ECS_CLUSTER=your_cluster_name >> /etc/ecs/ecs.config
All the available parameters for agent configuration can be found here http://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-agent-config.html
An autoscaling group is not strictly associated to a cluster. However, an autoscaling group can be configured such that each instance launched registers itself into a particular cluster.
Registering an instance into a cluster is the responsibility of the ECS Agent running on the instance. If you're using the Amazon ECS-optimized AMI, the ECS Agent will launch when the instance boots and register itself into the configured cluster. However, you can also use the ECS Agent on other Linux AMIs by following the installation instructions.
Well, i found out.
Its all about the ecs-agent and its config file /etc/ecs/ecs.config
(This file will be created through the Userdata field, when creating EC2 instances, even from an autoscaling configuration.)
Read about its configuration options here: http://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-agent-config.html
But you can even copy a ecs.config stored on Amazon S3, do it like this (following lines go into Userdata field):
#!/bin/bash
yum install -y aws-cli
aws configure set default.s3.signature_version s3v4
aws configure set default.s3.addressing_style path
aws configure set default.region eu-central-1
aws s3 cp s3://<bucketname>/ecs.config /etc/ecs/ecs.config
note: Signature_version v4 is specific for some regions, like eu-central-1.
This ofc only works, if your IAM role for the instance (in my case its ecsInstanceRole) has the right AmazonS3ReadOnlyAccess
The AWS GUI console way for that would be:
Use the cluster wizard at https://console.aws.amazon.com/ecs/home#/firstRun .
It will create an autoscaling grou for your cluster, a loadbalancer in front of it, and connect it all nicely.
This question is old but the answer is not complete. There are 2 parts to getting your own auto-scaling group to show up in your cluster (as of Jan 2022).
You need to ensure your cluster name is set for ECS_CLUSTER variable in /etc/ecs/ecs.config as mentioned in this answer: https://stackoverflow.com/a/35324937/583875
You need to create a new capacity provider for the cluster and attach this auto scaling group. To do this, go to Cluster -> Capacity Provider -> Create -> Select your auto scaling group under Auto Scaling group.
Another tricky part is getting your service to use the instances (if you have a service running). You need to edit the Service, and change the Capacity provider strategy. Click on Add another provider and choose the new capacity provider you created in (2) above.
That's all! To ensure things are working properly: you should see your capacity provider under Graph -> Capacity Providers and you should see instances from your auto scaling group under Graph -> ECS Instances.