Is it possible that Pycharm 'save' the whole staus at a breakpoint and allow the customer repeat debugging from there?
Occasionally I may need to debug a complicate bug which need ~2 hours to reach the target function. The multi-process code consists of many nested invoking and loops. The narrowing down process is pretty tricky. The first breakpoint is easy to set up. But if the second breakpoint was not set up correctly. Or there was one more clicking on 'step over' button. The debug session may exit since there was error. That is terrible since I may need another two hours to start another debugging. If Pycharm allow me to 'save' the debug status at the first breakpoint and allow me back to there whatever the current session ends or not it will be great helpful.
If I could catch up abnormal result before the session exit, then I need to step back during Pycharm debugging to figure out the issue. I searched and found out that both visual studio and IntelliJ has this ability. 'Jumping to Cursor' in Pycharm looks a similar solution. So far I don't have a chance to verify it by using a complex case.
So in genearal, what is the best strategy to debug those bugs which take long time to reach the starting point but failure point/reason is unclear? Thanks a lot.
Related
Currently i'm on a project which has some main loop which is quite slow. Putting a breakpoint into it implicates i have to press F9 each time, and there are a lot of iterations. What i imagine is to see the program 'move' on one of my screens, without wondering if it is stuck or not.
I already have log outputs and so on, my question really focuses on this 'show debug without stop' feature.
What i imagine is to see in this main loop the current line highlighted as i it was a line-by-line execution, but without breakpoints and without going down in the subcalls.
Does any of you know a way to do something like this or wish the same thing ?
Thanks !
Your Debug tool window has a "Mute breakpoints" control:
If you leave it ON, your application won't stop at breakpoints. You can switch it off later once you reach the point where you actually want to start debugging (e.g. mute breakpoints while the app is doing all the initial loading tasks, while you navigate to the screen you want to debug etc. and then unmute them).
I'm not quite sure this is it but , how about disabling focus on breakpoint:
Put your cursor on the line you'd like to breakpoint and hit ctrl-shift-f8 (on a pc). You can choose not to suspend when a breakpoint is hit, and/or you can add logging that the breakpoint was triggered. If you need to, you can add a condition that must be met before the breakpoint is triggered.
Here's what this looks like for me:
In all of my searching, I have not come across any trick, plug-in, or setting that would allow me to pre-populate a Watch Window for use during debugging.
The well-known steps to watch a variable in Visual Studio 2017 is to set a breakpoint (perhaps on the first instance of a variable being assigned a value), then, adding the variable to a Watch Window. On subsequent runs, that watched variable should remain in the Watch Window.
Is there a way to accomplish pre-populating the Watch Window before a debugging session? I have code that runs in a timed sequence. Taking the extended time during an execution break to pause and set up a watch causes the program to crash. Such timeout crashes while setting up variable watch objects makes for difficult interaction with the debugger. Pre-populating the watch list would help considerably.
I know that I could use a technique such as using Debug.Print(...) statements, which are printed to the Output Window during code execution. However, this doesn't allow me the control and visual feedback to my debugging efforts that comes from a Watch Window.
Watches can only be evaluated when you are paused in the debugger, say on a breakpoint. They can't be evaluated during normal execution. Your options to get around this limiation are:
Add Debug.Print(...) or something similar to your code that outputs a value.
Similar to #1 add a TracePoint which you'll find in the actions setting of a breakpoints setting (that's the gear icon when you hover over a breakpoint). When the TracePoints are hit they will then evaluate the expression that you specficied in the actions window and log it to the Output window. The advantage of TracePoints over adding your own logging is that you can turn it off and on without building your code. More info at: https://learn.microsoft.com/en-us/visualstudio/debugger/using-breakpoints?view=vs-2019#BKMK_Print_to_the_Output_window_with_tracepoints
Use the VS Enterprise only feature Snapshots which is part of IntelliTrace. Basically set your breakpoints but rather than stopping on them to look at the watch just continue. Each time you stop a snapshot of the process will be taken capturing the state of your application at that time. Then once you're finished use the Diagnostic Tools window to select each of the snasphots and activate them. For each snapshot you can use the debugger just as if you stopped the application. So you can use watches and inspect etc. Of course you can't step as the app has already ran but you can go to the next snapshot etc. More info at: https://learn.microsoft.com/en-us/visualstudio/debugger/view-snapshots-with-intellitrace?view=vs-2019 and https://devblogs.microsoft.com/visualstudio/step-back-while-debugging-with-intellitrace/
How Can Watch Variables be Configured in a Watch Window Before Running
a Debug Session in VS2017?
I'm afraid the answer is negative.For now,the Watch window can only be configured after the debug session start.It's like a runtime window only occurs during debugging.
So we can't pre-populate it before debug session for now. In other words, it's by design.
As alternative ways,you can follow Andy's detailed suggestions above.
And since your needs is meaningful in some specific debugging situation, you can also post your suggestion on development community like a user voice to add a new feature.
Long story short, I am debugging a big application which I didn't write. It is throwing an error when it runs on the server on which it is supposed to be run, so I am testing on my own machine with the debugger attached to see what happens.
It has thousands of lines of code, and has been running for a couple of hours now. I want to know which line of code is currently executing, so I can get a rough idea of how long is left, but I don't want to Break All as the code is...rickety.
Short of firing watchpoints all over the place in a spray and pray fashion, is there a non-invasive way to see which line of code is executing right now?
Thanks
Process Explorer can show the currently executing line and call stack in the process.
Right-click a process, click Properties, and then click the Threads tab.
Where XCode generate error for application crash ?
I'm crazyng ! My application when open second file xib with webview then it crash. But I don't know why ? how can i Know where is error ?
You need to learn how to use the debugger in Xcode.
Run your app under the debugger then instead if simply getting a stack trace Xcode will stop at the line the fault occurs and show you your code and variables. You can then examine the contents of your variables, the call tree, etc. and hunt down the problem.
Once you know the general area of the problem you can place breakpoints to pause your application before the problem occurs and check whether your variables have the values expected etc. Then you can run till the next breakpoint, or step through your code a line at a time.
You can add code, such as NSAssert's and NSLog's to your app to check progress and display information without stopping the run, etc.
It's a process, and some problems will be harder to track down, but you'll get quicker at it with practice.
The Xcode documentation will tell you all about the debugger.
HTH
Anyone else having issues with using F11 to step into code?
Until about an hour ago, I was able to perfectly step through code in both C# and C++ projects with ease, but now I suddenly have to press F11 at least 10 times before it will goto the next line. It's not even an issue of lag, as pressing and waiting has no result, it literally has to be hit 10 times every time I want to step into code. The same applies to the button on the GUI.
It started after playing with the Immediate and Command Window's (which are really useful by the way), I didn't use any commands that dealt with stepping into code, just commands for starting and stopping debugging.
Could I have accidentally enabled a "Make debugging retarded" option?
Googled everywhere for a solution, seems everyones had F11 problems but nothing like this, so any help is greatly appreciated