I want to parse a file and replace the text between "::" and ":::" with the text already there, just now capitalized.
I've tried using this command:
sed 's/\(::\)\(.*\)\(:::\)/\1\U\2\E\3/' filename
but the output just puts a U in beginning and E at the end of the string I want capitalized
Works for me, which makes me think you may not be on Linux?
echo "This is :: some sample text ::: to test uppercasing" | sed 's/\(::\)\(.*\)\(:::\)/\1\U\2\E\3/'
This is :: SOME SAMPLE TEXT ::: to test uppercasing
If Perl is your option, you can say something like:
echo "This is :: some sample text ::: to test uppercasing" | perl -pe 's/(::)(.*)(:::)/\1\U\2\E\3/'
This is :: SOME SAMPLE TEXT ::: to test uppercasing
gawk '{match($0,/::.*:::/,a) ;gsub(/::.*::/,toupper(a[0]))}1' input
Here ,bit less cryptic solution with gawk:, match is used to find the desired string ,later that string is used by gsub to convert it to upped cause using toupper function.
You are pretty close.
On Mac OS X, you will need to install GNU sed, because the feature you are using - \U - is a GNU extension.
So, start by installing it:
▶ brew install gnu-sed
Then I normally stick in some code like this somewhere:
shopt -s expand_aliases
alias sed='/usr/local/bin/gsed'
And then your GNU sed will work.
Finally, I would simplify that code as:
▶ sed -E 's/(::)(.*)(::)/\1\U\2\E\3/' <<< "foo::bar::baz"
foo::BAR::baz
Noting that -E gives you Extended Regular Expressions, and a cleaner syntax when you are doing captures.
This might work for you (GNU sed):
sed 's/::[^:]*:::/\U&/' file
or perhaps:
sed 's/::[^:]*:::/\n&\n/;h;y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/;G;s/.*\n\(.*\)\n.*\n\(.*\)\n.*\n/\2\1/' file
Using seds y native translate command, pattern matching and a copy held in the hold space.
Related
This question already has answers here:
Using different delimiters in sed commands and range addresses
(3 answers)
Closed 1 year ago.
I have a Visual Studio project, which is developed locally. Code files have to be deployed to a remote server. The only problem is the URLs they contain, which are hard-coded.
The project contains URLs such as ?page=one. For the link to be valid on the server, it must be /page/one .
I've decided to replace all URLs in my code files with sed before deployment, but I'm stuck on slashes.
I know this is not a pretty solution, but it's simple and would save me a lot of time. The total number of strings I have to replace is fewer than 10. A total number of files which have to be checked is ~30.
An example describing my situation is below:
The command I'm using:
sed -f replace.txt < a.txt > b.txt
replace.txt which contains all the strings:
s/?page=one&/pageone/g
s/?page=two&/pagetwo/g
s/?page=three&/pagethree/g
a.txt:
?page=one&
?page=two&
?page=three&
Content of b.txt after I run my sed command:
pageone
pagetwo
pagethree
What I want b.txt to contain:
/page/one
/page/two
/page/three
The easiest way would be to use a different delimiter in your search/replace lines, e.g.:
s:?page=one&:pageone:g
You can use any character as a delimiter that's not part of either string. Or, you could escape it with a backslash:
s/\//foo/
Which would replace / with foo. You'd want to use the escaped backslash in cases where you don't know what characters might occur in the replacement strings (if they are shell variables, for example).
The s command can use any character as a delimiter; whatever character comes after the s is used. I was brought up to use a #. Like so:
s#?page=one&#/page/one#g
A very useful but lesser-known fact about sed is that the familiar s/foo/bar/ command can use any punctuation, not only slashes. A common alternative is s#foo#bar#, from which it becomes obvious how to solve your problem.
add \ before special characters:
s/\?page=one&/page\/one\//g
etc.
In a system I am developing, the string to be replaced by sed is input text from a user which is stored in a variable and passed to sed.
As noted earlier on this post, if the string contained within the sed command block contains the actual delimiter used by sed - then sed terminates on syntax error. Consider the following example:
This works:
$ VALUE=12345
$ echo "MyVar=%DEF_VALUE%" | sed -e s/%DEF_VALUE%/${VALUE}/g
MyVar=12345
This breaks:
$ VALUE=12345/6
$ echo "MyVar=%DEF_VALUE%" | sed -e s/%DEF_VALUE%/${VALUE}/g
sed: -e expression #1, char 21: unknown option to `s'
Replacing the default delimiter is not a robust solution in my case as I did not want to limit the user from entering specific characters used by sed as the delimiter (e.g. "/").
However, escaping any occurrences of the delimiter in the input string would solve the problem.
Consider the below solution of systematically escaping the delimiter character in the input string before having it parsed by sed.
Such escaping can be implemented as a replacement using sed itself, this replacement is safe even if the input string contains the delimiter - this is since the input string is not part of the sed command block:
$ VALUE=$(echo ${VALUE} | sed -e "s#/#\\\/#g")
$ echo "MyVar=%DEF_VALUE%" | sed -e s/%DEF_VALUE%/${VALUE}/g
MyVar=12345/6
I have converted this to a function to be used by various scripts:
escapeForwardSlashes() {
# Validate parameters
if [ -z "$1" ]
then
echo -e "Error - no parameter specified!"
return 1
fi
# Perform replacement
echo ${1} | sed -e "s#/#\\\/#g"
return 0
}
this line should work for your 3 examples:
sed -r 's#\?(page)=([^&]*)&#/\1/\2#g' a.txt
I used -r to save some escaping .
the line should be generic for your one, two three case. you don't have to do the sub 3 times
test with your example (a.txt):
kent$ echo "?page=one&
?page=two&
?page=three&"|sed -r 's#\?(page)=([^&]*)&#/\1/\2#g'
/page/one
/page/two
/page/three
replace.txt should be
s/?page=/\/page\//g
s/&//g
please see this article
http://netjunky.net/sed-replace-path-with-slash-separators/
Just using | instead of /
Great answer from Anonymous. \ solved my problem when I tried to escape quotes in HTML strings.
So if you use sed to return some HTML templates (on a server), use double backslash instead of single:
var htmlTemplate = "<div style=\\"color:green;\\"></div>";
A simplier alternative is using AWK as on this answer:
awk '$0="prefix"$0' file > new_file
You may use an alternative regex delimiter as a search pattern by backs lashing it:
sed '\,{some_path},d'
For the s command:
sed 's,{some_path},{other_path},'
file.txt
...
<LOCAL_PATH_TO_REPO>/src/java/example.java
...
^A longer file but this pretty much explains what I am trying to do.
script.sh
dir=$(pwd)
# replace <LOCAL_PATH_TO_REPO> with dir
I tried using the sed command but it did not work for some reason. Any ideas on how to do this?
Your error means you have backslashes in the variable text.
The simplest solution is to change the delimiter to the one that does not occur in the variable text.
If there are no commas use a comma:
sed -i "s,LOCAL_PATH_TO_REPO,$PWD," file.yml
The -i flag introduces changes into the input file (works for GNU sed).
I have a huge .txt file that I want all spaces, line-breaks, indentations etc removed. It should literally be one long string.
I tried
sed -i 's/\ //g' test.txt
but nothing happens
sed -n "s/[[:blank:]]//g;H
$ {x;s/\n//g;p;}"
The H than $ are needed if you want to include New line due to fact that sed treat by default line by line (so no new line inside a line). The -n and p are needed to avoid double display with use of H
Seems to work ok for me:
[~/Desktop]
==> cat test.txt
the quick brown fox
[~/Desktop]
==> sed -i "s/\ //g" test.txt
[~/Desktop]
==> cat test.txt
thequickbrownfox
Sometimes using " " directly is hard and especially when you use double quotes (which involves that bash will interpret the string before passing it to sed).
sed -i -e 's/\s//g' file.txt
... should work (it works for me). "\s" means all whitespace characters, and with single quotes '', for bash not to interpret it before you passing it to sed.
While you use cygwin I think your OS is windows, then you don't need to use bash to implement your goal. Just open your txt file with the text editor, and replace the while space with nothing, then all of the whit space in you txt file will be removed.
This method can meet almost all kinds of removal. And also can apply in excel or word and so on.
Good luck!
For some reason I can't seem to find a straightforward answer to this and I'm on a bit of a time crunch at the moment. How would I go about inserting a choice line of text after the first line matching a specific string using the sed command. I have ...
CLIENTSCRIPT="foo"
CLIENTFILE="bar"
And I want insert a line after the CLIENTSCRIPT= line resulting in ...
CLIENTSCRIPT="foo"
CLIENTSCRIPT2="hello"
CLIENTFILE="bar"
Try doing this using GNU sed:
sed '/CLIENTSCRIPT="foo"/a CLIENTSCRIPT2="hello"' file
if you want to substitute in-place, use
sed -i '/CLIENTSCRIPT="foo"/a CLIENTSCRIPT2="hello"' file
Output
CLIENTSCRIPT="foo"
CLIENTSCRIPT2="hello"
CLIENTFILE="bar"
Doc
see sed doc and search \a (append)
Note the standard sed syntax (as in POSIX, so supported by all conforming sed implementations around (GNU, OS/X, BSD, Solaris...)):
sed '/CLIENTSCRIPT=/a\
CLIENTSCRIPT2="hello"' file
Or on one line:
sed -e '/CLIENTSCRIPT=/a\' -e 'CLIENTSCRIPT2="hello"' file
(-expressions (and the contents of -files) are joined with newlines to make up the sed script sed interprets).
The -i option for in-place editing is also a GNU extension, some other implementations (like FreeBSD's) support -i '' for that.
Alternatively, for portability, you can use perl instead:
perl -pi -e '$_ .= qq(CLIENTSCRIPT2="hello"\n) if /CLIENTSCRIPT=/' file
Or you could use ed or ex:
printf '%s\n' /CLIENTSCRIPT=/a 'CLIENTSCRIPT2="hello"' . w q | ex -s file
Sed command that works on MacOS (at least, OS 10) and Unix alike (ie. doesn't require gnu sed like Gilles' (currently accepted) one does):
sed -e '/CLIENTSCRIPT="foo"/a\'$'\n''CLIENTSCRIPT2="hello"' file
This works in bash and maybe other shells too that know the $'\n' evaluation quote style. Everything can be on one line and work in
older/POSIX sed commands. If there might be multiple lines matching the CLIENTSCRIPT="foo" (or your equivalent) and you wish to only add the extra line the first time, you can rework it as follows:
sed -e '/^ *CLIENTSCRIPT="foo"/b ins' -e b -e ':ins' -e 'a\'$'\n''CLIENTSCRIPT2="hello"' -e ': done' -e 'n;b done' file
(this creates a loop after the line insertion code that just cycles through the rest of the file, never getting back to the first sed command again).
You might notice I added a '^ *' to the matching pattern in case that line shows up in a comment, say, or is indented. Its not 100% perfect but covers some other situations likely to be common. Adjust as required...
These two solutions also get round the problem (for the generic solution to adding a line) that if your new inserted line contains unescaped backslashes or ampersands they will be interpreted by sed and likely not come out the same, just like the \n is - eg. \0 would be the first line matched. Especially handy if you're adding a line that comes from a variable where you'd otherwise have to escape everything first using ${var//} before, or another sed statement etc.
This solution is a little less messy in scripts (that quoting and \n is not easy to read though), when you don't want to put the replacement text for the a command at the start of a line if say, in a function with indented lines. I've taken advantage that $'\n' is evaluated to a newline by the shell, its not in regular '\n' single-quoted values.
Its getting long enough though that I think perl/even awk might win due to being more readable.
A POSIX compliant one using the s command:
sed '/CLIENTSCRIPT="foo"/s/.*/&\
CLIENTSCRIPT2="hello"/' file
Maybe a bit late to post an answer for this, but I found some of the above solutions a bit cumbersome.
I tried simple string replacement in sed and it worked:
sed 's/CLIENTSCRIPT="foo"/&\nCLIENTSCRIPT2="hello"/' file
& sign reflects the matched string, and then you add \n and the new line.
As mentioned, if you want to do it in-place:
sed -i 's/CLIENTSCRIPT="foo"/&\nCLIENTSCRIPT2="hello"/' file
Another thing. You can match using an expression:
sed -i 's/CLIENTSCRIPT=.*/&\nCLIENTSCRIPT2="hello"/' file
Hope this helps someone
The awk variant :
awk '1;/CLIENTSCRIPT=/{print "CLIENTSCRIPT2=\"hello\""}' file
I had a similar task, and was not able to get the above perl solution to work.
Here is my solution:
perl -i -pe "BEGIN{undef $/;} s/^\[mysqld\]$/[mysqld]\n\ncollation-server = utf8_unicode_ci\n/sgm" /etc/mysql/my.cnf
Explanation:
Uses a regular expression to search for a line in my /etc/mysql/my.cnf file that contained only [mysqld] and replaced it with
[mysqld]
collation-server = utf8_unicode_ci
effectively adding the collation-server = utf8_unicode_ci line after the line containing [mysqld].
I had to do this recently as well for both Mac and Linux OS's and after browsing through many posts and trying many things out, in my particular opinion I never got to where I wanted to which is: a simple enough to understand solution using well known and standard commands with simple patterns, one liner, portable, expandable to add in more constraints. Then I tried to looked at it with a different perspective, that's when I realized i could do without the "one liner" option if a "2-liner" met the rest of my criteria. At the end I came up with this solution I like that works in both Ubuntu and Mac which i wanted to share with everyone:
insertLine=$(( $(grep -n "foo" sample.txt | cut -f1 -d: | head -1) + 1 ))
sed -i -e "$insertLine"' i\'$'\n''bar'$'\n' sample.txt
In first command, grep looks for line numbers containing "foo", cut/head selects 1st occurrence, and the arithmetic op increments that first occurrence line number by 1 since I want to insert after the occurrence.
In second command, it's an in-place file edit, "i" for inserting: an ansi-c quoting new line, "bar", then another new line. The result is adding a new line containing "bar" after the "foo" line. Each of these 2 commands can be expanded to more complex operations and matching.
I'm trying to use SED to extract text from a log file. I can do a search-and-replace without too much trouble:
sed 's/foo/bar/' mylog.txt
However, I want to make the search case-insensitive. From what I've googled, it looks like appending i to the end of the command should work:
sed 's/foo/bar/i' mylog.txt
However, this gives me an error message:
sed: 1: "s/foo/bar/i": bad flag in substitute command: 'i'
What's going wrong here, and how do I fix it?
Update: Starting with macOS Big Sur (11.0), sed now does support the I flag for case-insensitive matching, so the command in the question should now work (BSD sed doesn't reporting its version, but you can go by the date at the bottom of the man page, which should be March 27, 2017 or more recent); a simple example:
# BSD sed on macOS Big Sur and above (and GNU sed, the default on Linux)
$ sed 's/ö/#/I' <<<'FÖO'
F#O # `I` matched the uppercase Ö correctly against its lowercase counterpart
Note: I (uppercase) is the documented form of the flag, but i works as well.
Similarly, starting with macOS Big Sur (11.0) awk now is locale-aware (awk --version should report 20200816 or more recent):
# BSD awk on macOS Big Sur and above (and GNU awk, the default on Linux)
$ awk 'tolower($0)' <<<'FÖO'
föo # non-ASCII character Ö was properly lowercased
The following applies to macOS up to Catalina (10.15):
To be clear: On macOS, sed - which is the BSD implementation - does NOT support case-insensitive matching - hard to believe, but true. The formerly accepted answer, which itself shows a GNU sed command, gained that status because of the perl-based solution mentioned in the comments.
To make that Perl solution work with foreign characters as well, via UTF-8, use something like:
perl -C -Mutf8 -pe 's/öœ/oo/i' <<< "FÖŒ" # -> "Foo"
-C turns on UTF-8 support for streams and files, assuming the current locale is UTF-8-based.
-Mutf8 tells Perl to interpret the source code as UTF-8 (in this case, the string passed to -pe) - this is the shorter equivalent of the more verbose -e 'use utf8;'.Thanks, Mark Reed
(Note that using awk is not an option either, as awk on macOS (i.e., BWK awk and BSD awk) appears to be completely unaware of locales altogether - its tolower() and toupper() functions ignore foreign characters (and sub() / gsub() don't have case-insensitivity flags to begin with).)
A note on the relationship of sed and awk to the POSIX standard:
BSD sed and awk limit their functionality mostly to what the POSIX sed and
POSIX awk specs mandate, whereas their GNU counterparts implement many more extensions.
Editor's note: This solution doesn't work on macOS (out of the box), because it only applies to GNU sed, whereas macOS comes with BSD sed.
Capitalize the 'I'.
sed 's/foo/bar/I' file
Another work-around for sed on Mac OS X is to install gsedfrom MacPorts or HomeBrew and then create the alias sed='gsed'.
If you are doing pattern matching first, e.g.,
/pattern/s/xx/yy/g
then you want to put the I after the pattern:
/pattern/Is/xx/yy/g
Example:
echo Fred | sed '/fred/Is//willma/g'
returns willma; without the I, it returns the string untouched (Fred).
The sed FAQ addresses the closely related case-insensitive search. It points out that a) many versions of sed support a flag for it and b) it's awkward to do in sed, you should rather use awk or Perl.
But to do it in POSIX sed, they suggest three options (adapted for substitution here):
Convert to uppercase and store original line in hold space; this won't work for substitutions, though, as the original content will be restored before printing, so it's only good for insert or adding lines based on a case-insensitive match.
Maybe the possibilities are limited to FOO, Foo and foo. These can be covered by
s/FOO/bar/;s/[Ff]oo/bar/
To search for all possible matches, one can use bracket expressions for each character:
s/[Ff][Oo][Oo]/bar/
The Mac version of sed seems a bit limited. One way to work around this is to use a linux container (via Docker) which has a useable version of sed:
cat your_file.txt | docker run -i busybox /bin/sed -r 's/[0-9]{4}/****/Ig'
Use following to replace all occurrences:
sed 's/foo/bar/gI' mylog.txt
I had a similar need, and came up with this:
this command to simply find all the files:
grep -i -l -r foo ./*
this one to exclude this_shell.sh (in case you put the command in a script called this_shell.sh), tee the output to the console to see what happened, and then use sed on each file name found to replace the text foo with bar:
grep -i -l -r --exclude "this_shell.sh" foo ./* | tee /dev/fd/2 | while read -r x; do sed -b -i 's/foo/bar/gi' "$x"; done
I chose this method, as I didn't like having all the timestamps changed for files not modified. feeding the grep result allows only the files with target text to be looked at (thus likely may improve performance / speed as well)
be sure to backup your files & test before using. May not work in some environments for files with embedded spaces. (?)
Following should be fine:
sed -i 's/foo/bar/gi' mylog.txt