"$" should not be immediately followed by digits [0-9]. It should only show the
output- "$" which is immediately followed by aphabet/alphanumeric/alphacharacter.
Input: dirname $0/../bin/$12JAVA_INV/$FILE12NAME
Output: $FILE12NAME
grep -o '[$][a-zA-z_]*'
Using this I'm receiving an output as: $ $ $FILENAME
You're getting $ in the result because * means to match zero or more of the preceding pattern. $0 matches because it has a $ followed by 0 letters.
If you want at least 1 letter, use + instead, it means one or more.
But if you want to be able to match $FILE12NAME, you also need to allow digits after the first character. So use:
grep -i -o '\$[a-z_][a-z_0-9]*'
This matches $, followed by a letter or underscore, followed by zero or more letters, underscores, or numbers.
It looks like you want:
$ echo 'dirname $0/../bin/$12JAVA_INV/$FILE12NAME' | awk '{print $NF}' FS=/
$FILE12NAME
But if you really want to parse it the way you describe, you could do either of:
$ echo 'dirname $0/../bin/$12JAVA_INV/$FILE12NAME' | sed -e 's/.*\(\$[^0-9]\)/\1/'
$FILE12NAME
$ echo 'dirname $0/../bin/$12JAVA_INV/$FILE12NAME' | sed -E 's/.*(\$[^0-9])/\1/'
$FILE12NAME
Related
How can I reverse a four length of letters with sed?
For example:
the year was 1815.
Reverse to:
the raey was 5181.
This is my attempt:
cat filename | sed's/\([a-z]*\) *\([a-z]*\)/\2, \1/'
But it does not work as I intended.
not sure it is possible to do it with GNU sed for all cases. If _ doesn't occur immediately before/after four letter words, you can use
sed -E 's/\b([a-z0-9])([a-z0-9])([a-z0-9])([a-z0-9])\b/\4\3\2\1/gi'
\b is word boundary, word definition being any alphabet or digit or underscore character. So \b will ensure to match only whole words not part of words
$ echo 'the year was 1815.' | sed -E 's/\b([a-z0-9])([a-z0-9])([a-z0-9])([a-z0-9])\b/\4\3\2\1/gi'
the raey was 5181.
$ echo 'two time five three six good' | sed -E 's/\b([a-z0-9])([a-z0-9])([a-z0-9])([a-z0-9])\b/\4\3\2\1/gi'
two emit evif three six doog
$ # but won't work if there are underscores around the words
$ echo '_good food' | sed -E 's/\b([a-z0-9])([a-z0-9])([a-z0-9])([a-z0-9])\b/\4\3\2\1/gi'
_good doof
tool with lookaround support would work for all cases
$ echo '_good food' | perl -pe 's/(?<![a-z0-9])([a-z0-9])([a-z0-9])([a-z0-9])([a-z0-9])(?!=[a-z0-9])/$4$3$2$1/gi'
_doog doof
(?<![a-z0-9]) and (?!=[a-z0-9]) are negative lookbehind and negative lookahead respectively
Can be shortened to
perl -pe 's/(?<![a-z0-9])[a-z0-9]{4}(?!=[a-z0-9])/reverse $&/gie'
which uses the e modifier to place Perl code in substitution section. This form is suitable to easily change length of words to be reversed
Possible shortest sed solution even if a four length of letters contains _s.
sed -r 's/\<(.)(.)(.)(.)\>/\4\3\2\1/g'
Following awk may help you in same. Tested this in GNU awk and only with provided sample Input_file
echo "the year was 1815." |
awk '
function reverse(val){
num=split(val, array,"");
i=array[num]=="."?num-1:num;
for(;i>q;i--){
var=var?var array[i]:array[i]
};
printf (array[num]=="."?var".":var);
var=""
}
{
for(j=1;j<=NF;j++){
printf("%s%s",j==NF||j==2?reverse($j):$j,j==NF?RS:FS)
}}'
This might work for you (GNU sed):
sed -r '/\<\w{4}\>/!b;s//\n&\n/g;s/^[^\n]/\n&/;:a;/\n\n/!s/(.*\n)([^\n])(.*\n)/\2\1\3/;ta;s/^([^\n]*)(.*)\n\n/\2\1/;ta;s/\n//' file
If there are no strings of the length required to reverse, bail out.
Prepend and append newlines to all required strings.
Insert a newline at the start of the pattern space (PS). The PS is divided into two parts, the first line will contain the current word being reversed. The remainder will contain the original line.
Each character of the word to be reversed is inserted at the front of the first line and removed from the original line. When all the characters in the word have been processed, the original word will have gone and only the bordering newlines will exist. These double newlines are then replaced by the word in the first line and the process is repeated until all words have been processed. Finally the newline introduced to separate the working line and the original is removed and the PS is printed.
N.B. This method may be used to reverse strings of varying string length i.e. by changing the first regexp strings of any number can be reversed. Also strings between two lengths may also be reversed e.g. /\<w{2,4}\>/ will change all words between 2 and 4 character length.
It's a recurrent problem so somebody created a bash command called "rev".
echo "$(echo the | rev) $(echo year | rev) $(echo was | rev) $(echo 1815 | rev)".
OR
echo "the year was 1815." | rev | tr ' ' '\n' | tac | tr '\n' ' '
I have a string that is sometimes
xxx.11_222_33_44_555.yyy
and sometimes
xxx.11_222_33_44.yyy
I would like to:
Check if has 4 occourances of _ (figured out how to do it).
If so - remove string's _33 (the 33 string changes, can be any number), so I am left with xxx.11_222_44.yyy.
Using sed :
sed 's/\(_[0-9]*\)_[0-9]*\(_[0-9]*_[0-9]*\)/\1\2/'
It matches the four underscores and replace the whole by the needed parts.
Test run :
$ echo "xxx.11_222_33_44_555.yyy" | sed 's/\(_[0-9]*\)_[0-9]*\(_[0-9]*_[0-9]*\)/\1\2/'
xxx.11_222_44_555.yyy
$ echo "xxx.11_222_33_44.yyy" | sed 's/\(_[0-9]*\)_[0-9]*\(_[0-9]*_[0-9]*\)/\1\2/'
xxx.11_222_33_44.yyy
perhaps something like this
echo "xxx.11_222_33_44.yyy" | sed -e's/\.\([0-9]\+\)_\([0-9]\+\)_\([0-9]\+\)_\([0-9]\+\)\./.\1_\2_\4./'
which checks if there are 4 groups of numbers separated by _ between the two dots and if yes, it leaves out the third group
try this;
echo "xxx.11_222_33_44_555.yyy" | awk -F'_' 'NF>4{print $1"_"$2"_"$4"_"$5};'
Solution using perl and Lookahead and Lookbehind
$ a="xxx.11_222_33_44_555.yyy"
$ perl -pe 's/\.\d+_\d+_\K\d+_(?=\d+_\d+\.)//' <<< "$a"
xxx.11_222_44_555.yyy
How can I remove the set of characters from a specified length in a file using shell script.
Example:
Filename : abc.txt
helloshell
Now how can I remove characters starting from 8 to 10 (the ell at the end)?
I have tried sed -r command on Linux servers but it's not working on AIX servers.
Linux command:
sed -r 's/.(.{3}).*/\1/' filename.txt
With Bash (extract substring from 0 to 7th character):
str="helloshell"
echo ${str:0:7}
With sed (removes 3 characters starting from 7th position) :
str="helloshell"
startpos=7;
nbchar=3;
echo "$str" | sed "s/^\(.\{$startpos\}\).\{$nbchar\}\(.*\)/\1\2/"
$ sed -r 's/^(.{7}).{0,3}(.*)$/\1\2/g'
helloshell
hellosh
1234567890
1234567
$
{0,3} ensures 3 or less chars from 8th position (0,3 implies remove only if present and hence also removes 1/2/3 chars from 8th position) i.e match and remove minimum 0 chars(for no chars) and maximum 3 chars
If you want exactly only 3 chars to removed from 8th position use {3} but it wont remove chars from 8th position if there are less than 3 chars, eg:
$ sed -r 's/^(.{7}).{3}(.*)$/\1\2/g'
123456789
123456789
$
Edit1:
you can use this instead without the -r switch and some escaping: sed 's/^\(.\{7\}\).\{0,3\}\(.*\)$/\1\2/g'
for performing the above operation only lines starting with BH, you can add a restriction for the substitute command like this:
sed '/^BH/s/^\(.\{7\}\).\{0,3\}\(.*\)$/\1\2/g'
/^BH/s.. would ensure substitution is performed only on lines starting with BH
$ sed '/^BH/s/^\(.\{7\}\).\{0,3\}\(.*\)$/\1\2/g'
BHhelloshell
BHhelloll
BH123456789
BH123459
helloshell
helloshell
$
To exclude BH while counting you can use:
$ sed '/^BH/s/^BH\(.\{7\}\).\{0,3\}\(.*\)$/BH\1\2/g'
BHhelloshell
BHhellosh
BH123456789
BH1234567
helloshell
helloshell
$
Try this if you are always expecting the last 3 to be deleted.
echo helloshell | sed 's/...$//'
For 8-10 try this:
echo helloshell | sed 's/\(.\{7\}\).../\1/'
echo helloshellHowAreYou | sed 's/\(.\{7\}\).../\1/'
For AIX you may need to remove the \ from \{
sed 's/\(.{7}\).../\1/'
And if there is a pattern that you want in the search string you have to adjust the value within in the \( and \)
I want to get the string between <sometag param=' and '>
I tried to use the method from Get any string between 2 string and assign a variable in bash to get the "x":
echo "<sometag param='x'><irrelevant stuff='nonsense'>" | tr "'" _ | sed -n 's/.*<sometag param=_\(.*\)_>.*/\1/p'
The problem (apart from low efficiency because I just cannot manage to escape the apostrophe correctly for sed) is that sed matches the maximum, i.e. the output is:
x_><irrelevant stuff=_nonsense
but the correct output would be the minimum-match, in this example just "x"
Thanks for your help
You are probably looking for something like this:
sed -n "s/.*<sometag param='\([^']*\)'>.*/\1/p"
Test:
echo "<sometag param='x'><irrelevant stuff='nonsense'>" | sed -n "s/.*<sometag param='\([^']*\)'>.*/\1/p"
Results:
x
Explanation:
Instead of a greedy capture, use a non-greedy capture like: [^']* which means match anything except ' any number of times. To make the pattern stick, this is followed by: '>.
You can also use double quotes so that you don't need to escape the single quotes. If you wanted to escape the single quotes, you'd do this:
-
... | sed -n 's/.*<sometag param='\''\([^'\'']*\)'\''>.*/\1/p'
Notice how that the single quotes aren't really escaped. The sed expression is stopped, an escaped single quote is inserted and the sed expression is re-opened. Think of it like a four character escape sequence.
Personally, I'd use GNU grep. It would make for a slightly shorter solution. Run like:
... | grep -oP "(?<=<sometag param=').*?(?='>)"
Test:
echo "<sometag param='x'><irrelevant stuff='nonsense'>" | grep -oP "(?<=<sometag param=').*?(?='>)"
Results:
x
You don't have to assemble regexes in those cases, you can just use ' as the field separator
in="<sometag param='x'><irrelevant stuff='nonsense'>"
IFS="'" read x whatiwant y <<< "$in" # bash
echo "$whatiwant"
awk -F\' '{print $2}' <<< "$in" # awk
I having problems in extracting the word from a line. What i want is that it picks the first word before the symbol # but after the /. Which is the only delimiter that stand out.
A line looks like this:
,["https://picasaweb.google.com/111560558537332305125/Programming#5743548966953176786",1,["https://lh6.googleusercontent.com/-Is8rb8G1sb8/T7UvWtVOTtI/AAAAAAAAG68/Cht3FzfHXNc/s0-d/Geek.jpg",1920,1200]
I want the word Programming.
To get that line i am using this which narrows it down.
sed -n '/.*picasa.*.jpg/p' 5743548866439293105
So i want it to pretty much find # and then go backward until it hit the first /. Then print it out. In this case the word should be Programming but could be anything.
I want it to be as short as possible and have experimented with
sed -n '/.*picasa.*.jpg/p' 5743548866439293105 | awk '$0=$2' FS="/" RS="[$#]"
You can do that with sed (slightly shortened for formatting but works on your original string as well):
pax> echo ',["https://p.g.com/111/Prog#574' | sed 's/^[^#]*\/\([^#]*\)#.*$/\1/'
Prog
pax>
Explaining in more detail:
/---+------------------> greedy capture up to '/'.
/ |
| | /------+---------> capture the stuff between '/' and '#'.
| |/ |
| || | /-+-----> everything from '#' to end of line.
| || |/ |
| || || |
's/^[^#]*\/\([^#]*\)#.*$/\1/'
||
\+---> replace with captured group.
It basically searches for an entire line that has the pattern you want (first # following a /), whilst capturing (with the \( and \) brackets) just the stuff between / and #.
The substitution then replaces the entire line with just that captured text you're interested in (via \1).
Using grep with some Perl regex extensions:
echo $string | grep -P -o "(?<=/)[^/]+(?=#)"
-P tells grep to use Perl extensions. -o tells grep to display only the matched text. To understand what gets matched, break the regex into three parts: (?<=/), [^/]+?, and (?=#). The first part says that the matched text must follow a '/', without including the '/' in the match. The second parts matches a string of non-'/' characters. The last part says that the matched text must be immediately followed by a '#', without including the '#' in the match.
Another grep, using the "\K" feature to "throw away" the match up to the last '/' before the '#':
# Match as much as possible up to a '/', but throw it away, then match as much as you can
# up to the first #
echo $string | grep -oP ".*/\K.+(?=#)"
Using cut and awk to get the first field (splitting on #) followed by the last field (splitting on /):
echo $string | cut -d# -f1 | awk -F/ '{print $NF}'
Using some temporary variables and bash's parameter expansion facilities:
$ FOO=["https://picasaweb.google.com/111560558537332305125/Programming#5743548966953176786",1,["https://lh6.googleusercontent.com/-Is8rb8G1sb8/T7UvWtVOTtI/AAAAAAAAG68/Cht3FzfHXNc/s0-d/Geek.jpg",1920,1200]
$ BAR=${FOO%#*} # Strip the last # and everything after
$ echo $BAR
[https://picasaweb.google.com/111560558537332305125/Programming
$ BAZ=${BAR##*/} # Strip everything up to and including the last /
$ echo $BAZ
Programming
This might work for you:
sed '/.*\/\([^#]*\)#.*/{s//\1/;q};d' file