Get string between strings in bash - bash

I want to get the string between <sometag param=' and '>
I tried to use the method from Get any string between 2 string and assign a variable in bash to get the "x":
echo "<sometag param='x'><irrelevant stuff='nonsense'>" | tr "'" _ | sed -n 's/.*<sometag param=_\(.*\)_>.*/\1/p'
The problem (apart from low efficiency because I just cannot manage to escape the apostrophe correctly for sed) is that sed matches the maximum, i.e. the output is:
x_><irrelevant stuff=_nonsense
but the correct output would be the minimum-match, in this example just "x"
Thanks for your help

You are probably looking for something like this:
sed -n "s/.*<sometag param='\([^']*\)'>.*/\1/p"
Test:
echo "<sometag param='x'><irrelevant stuff='nonsense'>" | sed -n "s/.*<sometag param='\([^']*\)'>.*/\1/p"
Results:
x
Explanation:
Instead of a greedy capture, use a non-greedy capture like: [^']* which means match anything except ' any number of times. To make the pattern stick, this is followed by: '>.
You can also use double quotes so that you don't need to escape the single quotes. If you wanted to escape the single quotes, you'd do this:
-
... | sed -n 's/.*<sometag param='\''\([^'\'']*\)'\''>.*/\1/p'
Notice how that the single quotes aren't really escaped. The sed expression is stopped, an escaped single quote is inserted and the sed expression is re-opened. Think of it like a four character escape sequence.
Personally, I'd use GNU grep. It would make for a slightly shorter solution. Run like:
... | grep -oP "(?<=<sometag param=').*?(?='>)"
Test:
echo "<sometag param='x'><irrelevant stuff='nonsense'>" | grep -oP "(?<=<sometag param=').*?(?='>)"
Results:
x

You don't have to assemble regexes in those cases, you can just use ' as the field separator
in="<sometag param='x'><irrelevant stuff='nonsense'>"
IFS="'" read x whatiwant y <<< "$in" # bash
echo "$whatiwant"
awk -F\' '{print $2}' <<< "$in" # awk

Related

find & replace only exact match between delimiters in string values

I have a string value stored in a variable:
PTYPE="Other Farm|Raised Ranch|Farm house|Other|A-Frame|Log Home"
I want to find & replace Other with some value like NOTHING. All values are stored in variables.
WhatToChange=Other
NewValue=NOTHING
echo $PTYPE|sed -e "s#${WhatToChange}#${NewValue}#g"
This is replacing all the occurances of Other and getting output like:
NOTHING Farm|Raised Ranch|Farm house|NOTHING|A-Frame|Log Home
Is there any way I can exactly change only the exact one? The place for ${WhatToChange} is variable.
As you have well defined fields and want an exact match, awk could be easier to use than sed; at the very least, you won't have to worry about escaping the strings for using it in the sed expression:
echo "Other Farm|Raised Ranch|Farm house|Other|A-Frame|Log Home" |
awk -v old="Other" -v new="NOTHING" \
'BEGIN {FS = OFS = "|"} {for(i=1;i<=NF;i++) if($i == old) $i = new} 1'
output:
Other Farm|Raised Ranch|Farm house|NOTHING|A-Frame|Log Home
To match either the exact character | or the beginning of the line, use ([|]|^).
To match either the exact character | or the end of the line, use ([|]|$).
To put a | back in place only when appropriate, store these in match groups, and refer to those groups with \1 or \2:
PTYPE="Other Farm|Raised Ranch|Farm house|Other|A-Frame|Log Home"
WhatToChange=Other
NewValue=NOTHING
sed -re "s#(^|[|])${WhatToChange}($|[|])#\1${NewValue}\2#g" <<<"$PTYPE"
...emits as output:
Other Farm|Raised Ranch|Farm house|NOTHING|A-Frame|Log Home
...and still works even if WhatToChange is matched at the beginning or end of the list.
For fun, some perl:
This is like #Charles's sed solution: Note the \Q...\E so that the "to change" value is treated as literal text.
echo "$PTYPE" | perl -spe '
s{ (?:^|\|)\K \Q$WhatToChange\E (?=\||$) }{$NewValue}gx
' -- -WhatToChange=Other -NewValue=NOTHING
This is like #Fravadona's awk solution:
echo "$PTYPE" | perl -F'[|]' -sane '
print join "|", map {$_ eq $WhatToChange ? $NewValue : $_} #F
' -- -WhatToChange=Other -NewValue=NOTHING
How about
echo ${PTYPE//$WhatToChange/$NewValue}
UPDATE:
I just realized that the replacement should happen only if WhatToChange is the whole content between two separators (|). In this case, we can do it in bash as well (without the need to revert to a child process):
if [[ $PTYPE =~ (.*[|]|^)$WhatToChange([|].*|$) ]]
echo "${BASH_REMATCH[1]}${NewValue}${BASH_REMATCH[2]}"
fi
UPDATE (based on the comment by Fravadona):
Used in this way, WhatToChange is interpreted as a regular expression. This can be useful, if you want to catch for instance variations of the string, for instance
WhatToChange='[Oo]ther' # to catch Other and other
If you always want to have a literal match, you have to quote the variable:
[[ $PTYPE =~ (.*[|]|^)"$WhatToChange"([|].*|$) ]]
This might work for you (GNU sed & bash):
<<<"$PTYPE" sed 'y/|/\n/;s/^'"$WhatToChange"'$/'"$NewValue"'/mg;y/\n/|/'
Input $PTYPE as a here-string into sed.
Translate | separators to newlines.
Replace $WhatToChange to $NewValue for each matched line.
Translate newlines back to |'s.
N.B. The use of the m flag in the substitution command allows sed to work in multiline mode and this presents each value between separators on its own line.
An alternative:
sed -z 'y/|/\x00/;s/^'"$WhatToChange"'$/'"$NewValue"'/mg;y/\x00/|/;' file

Double quotes containing variable not working in sed [duplicate]

In my bash script I have an external (received from user) string, which I should use in sed pattern.
REPLACE="<funny characters here>"
sed "s/KEYWORD/$REPLACE/g"
How can I escape the $REPLACE string so it would be safely accepted by sed as a literal replacement?
NOTE: The KEYWORD is a dumb substring with no matches etc. It is not supplied by user.
Warning: This does not consider newlines. For a more in-depth answer, see this SO-question instead. (Thanks, Ed Morton & Niklas Peter)
Note that escaping everything is a bad idea. Sed needs many characters to be escaped to get their special meaning. For example, if you escape a digit in the replacement string, it will turn in to a backreference.
As Ben Blank said, there are only three characters that need to be escaped in the replacement string (escapes themselves, forward slash for end of statement and & for replace all):
ESCAPED_REPLACE=$(printf '%s\n' "$REPLACE" | sed -e 's/[\/&]/\\&/g')
# Now you can use ESCAPED_REPLACE in the original sed statement
sed "s/KEYWORD/$ESCAPED_REPLACE/g"
If you ever need to escape the KEYWORD string, the following is the one you need:
sed -e 's/[]\/$*.^[]/\\&/g'
And can be used by:
KEYWORD="The Keyword You Need";
ESCAPED_KEYWORD=$(printf '%s\n' "$KEYWORD" | sed -e 's/[]\/$*.^[]/\\&/g');
# Now you can use it inside the original sed statement to replace text
sed "s/$ESCAPED_KEYWORD/$ESCAPED_REPLACE/g"
Remember, if you use a character other than / as delimiter, you need replace the slash in the expressions above wih the character you are using. See PeterJCLaw's comment for explanation.
Edited: Due to some corner cases previously not accounted for, the commands above have changed several times. Check the edit history for details.
The sed command allows you to use other characters instead of / as separator:
sed 's#"http://www\.fubar\.com"#URL_FUBAR#g'
The double quotes are not a problem.
The only three literal characters which are treated specially in the replace clause are / (to close the clause), \ (to escape characters, backreference, &c.), and & (to include the match in the replacement). Therefore, all you need to do is escape those three characters:
sed "s/KEYWORD/$(echo $REPLACE | sed -e 's/\\/\\\\/g; s/\//\\\//g; s/&/\\\&/g')/g"
Example:
$ export REPLACE="'\"|\\/><&!"
$ echo fooKEYWORDbar | sed "s/KEYWORD/$(echo $REPLACE | sed -e 's/\\/\\\\/g; s/\//\\\//g; s/&/\\\&/g')/g"
foo'"|\/><&!bar
Based on Pianosaurus's regular expressions, I made a bash function that escapes both keyword and replacement.
function sedeasy {
sed -i "s/$(echo $1 | sed -e 's/\([[\/.*]\|\]\)/\\&/g')/$(echo $2 | sed -e 's/[\/&]/\\&/g')/g" $3
}
Here's how you use it:
sedeasy "include /etc/nginx/conf.d/*" "include /apps/*/conf/nginx.conf" /etc/nginx/nginx.conf
It's a bit late to respond... but there IS a much simpler way to do this. Just change the delimiter (i.e., the character that separates fields). So, instead of s/foo/bar/ you write s|bar|foo.
And, here's the easy way to do this:
sed 's|/\*!50017 DEFINER=`snafu`#`localhost`\*/||g'
The resulting output is devoid of that nasty DEFINER clause.
It turns out you're asking the wrong question. I also asked the wrong question. The reason it's wrong is the beginning of the first sentence: "In my bash script...".
I had the same question & made the same mistake. If you're using bash, you don't need to use sed to do string replacements (and it's much cleaner to use the replace feature built into bash).
Instead of something like, for example:
function escape-all-funny-characters() { UNKNOWN_CODE_THAT_ANSWERS_THE_QUESTION_YOU_ASKED; }
INPUT='some long string with KEYWORD that need replacing KEYWORD.'
A="$(escape-all-funny-characters 'KEYWORD')"
B="$(escape-all-funny-characters '<funny characters here>')"
OUTPUT="$(sed "s/$A/$B/g" <<<"$INPUT")"
you can use bash features exclusively:
INPUT='some long string with KEYWORD that need replacing KEYWORD.'
A='KEYWORD'
B='<funny characters here>'
OUTPUT="${INPUT//"$A"/"$B"}"
Use awk - it is cleaner:
$ awk -v R='//addr:\\file' '{ sub("THIS", R, $0); print $0 }' <<< "http://file:\_THIS_/path/to/a/file\\is\\\a\\ nightmare"
http://file:\_//addr:\file_/path/to/a/file\\is\\\a\\ nightmare
Here is an example of an AWK I used a while ago. It is an AWK that prints new AWKS. AWK and SED being similar it may be a good template.
ls | awk '{ print "awk " "'"'"'" " {print $1,$2,$3} " "'"'"'" " " $1 ".old_ext > " $1 ".new_ext" }' > for_the_birds
It looks excessive, but somehow that combination of quotes works to keep the ' printed as literals. Then if I remember correctly the vaiables are just surrounded with quotes like this: "$1". Try it, let me know how it works with SED.
These are the escape codes that I've found:
* = \x2a
( = \x28
) = \x29
" = \x22
/ = \x2f
\ = \x5c
' = \x27
? = \x3f
% = \x25
^ = \x5e
sed is typically a mess, especially the difference between gnu-sed and bsd-sed
might just be easier to place some sort of sentinel at the sed side, then a quick pipe over to awk, which is far more flexible in accepting any ERE regex, escaped hex, or escaped octals.
e.g. OFS in awk is the true replacement ::
date | sed -E 's/[0-9]+/\xC1\xC0/g' |
mawk NF=NF FS='\xC1\xC0' OFS='\360\237\244\241'
1 Tue Aug 🤡 🤡:🤡:🤡 EDT 🤡
(tested and confirmed working on both BSD-sed and GNU-sed - the emoji isn't a typo that's what those 4 bytes map to in UTF-8 )
There are dozens of answers out there... If you don't mind using a bash function schema, below is a good answer. The objective below was to allow using sed with practically any parameter as a KEYWORD (F_PS_TARGET) or as a REPLACE (F_PS_REPLACE). We tested it in many scenarios and it seems to be pretty safe. The implementation below supports tabs, line breaks and sigle quotes for both KEYWORD and replace REPLACE.
NOTES: The idea here is to use sed to escape entries for another sed command.
CODE
F_REVERSE_STRING_R=""
f_reverse_string() {
: 'Do a string reverse.
To undo just use a reversed string as STRING_INPUT.
Args:
STRING_INPUT (str): String input.
Returns:
F_REVERSE_STRING_R (str): The modified string.
'
local STRING_INPUT=$1
F_REVERSE_STRING_R=$(echo "x${STRING_INPUT}x" | tac | rev)
F_REVERSE_STRING_R=${F_REVERSE_STRING_R%?}
F_REVERSE_STRING_R=${F_REVERSE_STRING_R#?}
}
# [Ref(s).: https://stackoverflow.com/a/2705678/3223785 ]
F_POWER_SED_ECP_R=""
f_power_sed_ecp() {
: 'Escape strings for the "sed" command.
Escaped characters will be processed as is (e.g. /n, /t ...).
Args:
F_PSE_VAL_TO_ECP (str): Value to be escaped.
F_PSE_ECP_TYPE (int): 0 - For the TARGET value; 1 - For the REPLACE value.
Returns:
F_POWER_SED_ECP_R (str): Escaped value.
'
local F_PSE_VAL_TO_ECP=$1
local F_PSE_ECP_TYPE=$2
# NOTE: Operational characters of "sed" will be escaped, as well as single quotes.
# By Questor
if [ ${F_PSE_ECP_TYPE} -eq 0 ] ; then
# NOTE: For the TARGET value. By Questor
F_POWER_SED_ECP_R=$(echo "x${F_PSE_VAL_TO_ECP}x" | sed 's/[]\/$*.^[]/\\&/g' | sed "s/'/\\\x27/g" | sed ':a;N;$!ba;s/\n/\\n/g')
else
# NOTE: For the REPLACE value. By Questor
F_POWER_SED_ECP_R=$(echo "x${F_PSE_VAL_TO_ECP}x" | sed 's/[\/&]/\\&/g' | sed "s/'/\\\x27/g" | sed ':a;N;$!ba;s/\n/\\n/g')
fi
F_POWER_SED_ECP_R=${F_POWER_SED_ECP_R%?}
F_POWER_SED_ECP_R=${F_POWER_SED_ECP_R#?}
}
# [Ref(s).: https://stackoverflow.com/a/24134488/3223785 ,
# https://stackoverflow.com/a/21740695/3223785 ,
# https://unix.stackexchange.com/a/655558/61742 ,
# https://stackoverflow.com/a/11461628/3223785 ,
# https://stackoverflow.com/a/45151986/3223785 ,
# https://linuxaria.com/pills/tac-and-rev-to-see-files-in-reverse-order ,
# https://unix.stackexchange.com/a/631355/61742 ]
F_POWER_SED_R=""
f_power_sed() {
: 'Facilitate the use of the "sed" command. Replaces in files and strings.
Args:
F_PS_TARGET (str): Value to be replaced by the value of F_PS_REPLACE.
F_PS_REPLACE (str): Value that will replace F_PS_TARGET.
F_PS_FILE (Optional[str]): File in which the replacement will be made.
F_PS_SOURCE (Optional[str]): String to be manipulated in case "F_PS_FILE" was
not informed.
F_PS_NTH_OCCUR (Optional[int]): [1~n] - Replace the nth match; [n~-1] - Replace
the last nth match; 0 - Replace every match; Default 1.
Returns:
F_POWER_SED_R (str): Return the result if "F_PS_FILE" is not informed.
'
local F_PS_TARGET=$1
local F_PS_REPLACE=$2
local F_PS_FILE=$3
local F_PS_SOURCE=$4
local F_PS_NTH_OCCUR=$5
if [ -z "$F_PS_NTH_OCCUR" ] ; then
F_PS_NTH_OCCUR=1
fi
local F_PS_REVERSE_MODE=0
if [ ${F_PS_NTH_OCCUR} -lt -1 ] ; then
F_PS_REVERSE_MODE=1
f_reverse_string "$F_PS_TARGET"
F_PS_TARGET="$F_REVERSE_STRING_R"
f_reverse_string "$F_PS_REPLACE"
F_PS_REPLACE="$F_REVERSE_STRING_R"
f_reverse_string "$F_PS_SOURCE"
F_PS_SOURCE="$F_REVERSE_STRING_R"
F_PS_NTH_OCCUR=$((-F_PS_NTH_OCCUR))
fi
f_power_sed_ecp "$F_PS_TARGET" 0
F_PS_TARGET=$F_POWER_SED_ECP_R
f_power_sed_ecp "$F_PS_REPLACE" 1
F_PS_REPLACE=$F_POWER_SED_ECP_R
local F_PS_SED_RPL=""
if [ ${F_PS_NTH_OCCUR} -eq -1 ] ; then
# NOTE: We kept this option because it performs better when we only need to replace
# the last occurrence. By Questor
# [Ref(s).: https://linuxhint.com/use-sed-replace-last-occurrence/ ,
# https://unix.stackexchange.com/a/713866/61742 ]
F_PS_SED_RPL="'s/\(.*\)$F_PS_TARGET/\1$F_PS_REPLACE/'"
elif [ ${F_PS_NTH_OCCUR} -gt 0 ] ; then
# [Ref(s).: https://unix.stackexchange.com/a/587924/61742 ]
F_PS_SED_RPL="'s/$F_PS_TARGET/$F_PS_REPLACE/$F_PS_NTH_OCCUR'"
elif [ ${F_PS_NTH_OCCUR} -eq 0 ] ; then
F_PS_SED_RPL="'s/$F_PS_TARGET/$F_PS_REPLACE/g'"
fi
# NOTE: As the "sed" commands below always process literal values for the "F_PS_TARGET"
# so we use the "-z" flag in case it has multiple lines. By Quaestor
# [Ref(s).: https://unix.stackexchange.com/a/525524/61742 ]
if [ -z "$F_PS_FILE" ] ; then
F_POWER_SED_R=$(echo "x${F_PS_SOURCE}x" | eval "sed -z $F_PS_SED_RPL")
F_POWER_SED_R=${F_POWER_SED_R%?}
F_POWER_SED_R=${F_POWER_SED_R#?}
if [ ${F_PS_REVERSE_MODE} -eq 1 ] ; then
f_reverse_string "$F_POWER_SED_R"
F_POWER_SED_R="$F_REVERSE_STRING_R"
fi
else
if [ ${F_PS_REVERSE_MODE} -eq 0 ] ; then
eval "sed -i -z $F_PS_SED_RPL \"$F_PS_FILE\""
else
tac "$F_PS_FILE" | rev | eval "sed -z $F_PS_SED_RPL" | tac | rev > "$F_PS_FILE"
fi
fi
}
MODEL
f_power_sed "F_PS_TARGET" "F_PS_REPLACE" "" "F_PS_SOURCE"
echo "$F_POWER_SED_R"
EXAMPLE
f_power_sed "{ gsub(/,[ ]+|$/,\"\0\"); print }' ./ and eliminate" "[ ]+|$/,\"\0\"" "" "Great answer (+1). If you change your awk to awk '{ gsub(/,[ ]+|$/,\"\0\"); print }' ./ and eliminate that concatenation of the final \", \" then you don't have to go through the gymnastics on eliminating the final record. So: readarray -td '' a < <(awk '{ gsub(/,[ ]+/,\"\0\"); print; }' <<<\"$string\") on Bash that supports readarray. Note your method is Bash 4.4+ I think because of the -d in readar"
echo "$F_POWER_SED_R"
IF YOU JUST WANT TO ESCAPE THE PARAMETERS TO THE SED COMMAND
MODEL
# "TARGET" value.
f_power_sed_ecp "F_PSE_VAL_TO_ECP" 0
echo "$F_POWER_SED_ECP_R"
# "REPLACE" value.
f_power_sed_ecp "F_PSE_VAL_TO_ECP" 1
echo "$F_POWER_SED_ECP_R"
IMPORTANT: If the strings for KEYWORD and/or replace REPLACE contain tabs or line breaks you will need to use the "-z" flag in your "sed" command. More details here.
EXAMPLE
f_power_sed_ecp "{ gsub(/,[ ]+|$/,\"\0\"); print }' ./ and eliminate" 0
echo "$F_POWER_SED_ECP_R"
f_power_sed_ecp "[ ]+|$/,\"\0\"" 1
echo "$F_POWER_SED_ECP_R"
NOTE: The f_power_sed_ecp and f_power_sed functions above was made available completely free as part of this project ez_i - Create shell script installers easily!.
Standard recommendation here: use perl :)
echo KEYWORD > /tmp/test
REPLACE="<funny characters here>"
perl -pi.bck -e "s/KEYWORD/${REPLACE}/g" /tmp/test
cat /tmp/test
don't forget all the pleasure that occur with the shell limitation around " and '
so (in ksh)
Var=">New version of \"content' here <"
printf "%s" "${Var}" | sed "s/[&\/\\\\*\\"']/\\&/g' | read -r EscVar
echo "Here is your \"text\" to change" | sed "s/text/${EscVar}/g"
If the case happens to be that you are generating a random password to pass to sed replace pattern, then you choose to be careful about which set of characters in the random string. If you choose a password made by encoding a value as base64, then there is is only character that is both possible in base64 and is also a special character in sed replace pattern. That character is "/", and is easily removed from the password you are generating:
# password 32 characters log, minus any copies of the "/" character.
pass=`openssl rand -base64 32 | sed -e 's/\///g'`;
If you are just looking to replace Variable value in sed command then just remove
Example:
sed -i 's/dev-/dev-$ENV/g' test to sed -i s/dev-/dev-$ENV/g test
I have an improvement over the sedeasy function, which WILL break with special characters like tab.
function sedeasy_improved {
sed -i "s/$(
echo "$1" | sed -e 's/\([[\/.*]\|\]\)/\\&/g'
| sed -e 's:\t:\\t:g'
)/$(
echo "$2" | sed -e 's/[\/&]/\\&/g'
| sed -e 's:\t:\\t:g'
)/g" "$3"
}
So, whats different? $1 and $2 wrapped in quotes to avoid shell expansions and preserve tabs or double spaces.
Additional piping | sed -e 's:\t:\\t:g' (I like : as token) which transforms a tab in \t.
An easier way to do this is simply building the string before hand and using it as a parameter for sed
rpstring="s/KEYWORD/$REPLACE/g"
sed -i $rpstring test.txt

Is there a way to format the width of a substring within a string in a bash/sh script?

I have to format the width of a substring within a string using a bash script, but without using tokens or loops. A single character between two colons should be prepended by a 0 in order to match the standard width of 2 for each field.
For e.g
from:
6:0:36:35:30:30:72:6c:73:0:c:52:4c:30:31:30:31:30:30:30:31:36:39:0:1:3
to
06:00:36:35:30:30:72:6c:73:00:0c:52:4c:30:31:30:31:30:30:30:31:36:39:00:01:03
How can I do this?
sed -r 's/\<([0-9a-f])\>/0\1/g'
Search and replace with a regex. Use \< and \> to match word boundaries so [0-9a-f] only matches single digits.
$ sed -r 's/\<([0-9a-f])\>/0\1/g' <<< "6:0:36:35:30:30:72:6c:73:0:c:52:4c:30:31:30:31:30:30:30:31:36:39:0:1:3"
06:00:36:35:30:30:72:6c:73:00:0c:52:4c:30:31:30:31:30:30:30:31:36:39:00:01:03
awk -F: -v OFS=: '{for(i=1;i<=NF;i++) if(length($i)==1)gsub($i,"0&",$i)}1' file
Output:
06:00:36:35:30:30:72:6c:73:00:0c:52:4c:30:31:30:31:30:30:30:31:36:39:00:01:03
This will divide the whole line into fields separated by : , if the length of any of the field is == 1. then it will replace that field with 0field.
Bash solution:
IFS=:; for i in $string; do echo -n 0$i: | tail -c 3; done
With
str="06:00:36:35:30:30:72:6c:73:00:0c:52:4c:30:31:30:31:30:30:30:31:36:39:00:01:03"
you can add a '0' to all tokens and remove those that are unwanted:
sed -r 's/0([0-9a-f]{2})/\1/g' <<< "0${str//:/:0}"
That doesn't feel right, making errors and repairing them.
A better alternative is
echo $(IFS=:; printf "%2s:" ${str} | tr " " "0")

Bash: replace 4 occourance of a string if exist

I have a string that is sometimes
xxx.11_222_33_44_555.yyy
and sometimes
xxx.11_222_33_44.yyy
I would like to:
Check if has 4 occourances of _ (figured out how to do it).
If so - remove string's _33 (the 33 string changes, can be any number), so I am left with xxx.11_222_44.yyy.
Using sed :
sed 's/\(_[0-9]*\)_[0-9]*\(_[0-9]*_[0-9]*\)/\1\2/'
It matches the four underscores and replace the whole by the needed parts.
Test run :
$ echo "xxx.11_222_33_44_555.yyy" | sed 's/\(_[0-9]*\)_[0-9]*\(_[0-9]*_[0-9]*\)/\1\2/'
xxx.11_222_44_555.yyy
$ echo "xxx.11_222_33_44.yyy" | sed 's/\(_[0-9]*\)_[0-9]*\(_[0-9]*_[0-9]*\)/\1\2/'
xxx.11_222_33_44.yyy
perhaps something like this
echo "xxx.11_222_33_44.yyy" | sed -e's/\.\([0-9]\+\)_\([0-9]\+\)_\([0-9]\+\)_\([0-9]\+\)\./.\1_\2_\4./'
which checks if there are 4 groups of numbers separated by _ between the two dots and if yes, it leaves out the third group
try this;
echo "xxx.11_222_33_44_555.yyy" | awk -F'_' 'NF>4{print $1"_"$2"_"$4"_"$5};'
Solution using perl and Lookahead and Lookbehind
$ a="xxx.11_222_33_44_555.yyy"
$ perl -pe 's/\.\d+_\d+_\K\d+_(?=\d+_\d+\.)//' <<< "$a"
xxx.11_222_44_555.yyy

How to use sed to extract a string [duplicate]

This question already has answers here:
BASH extract value after string in variable Not file [duplicate]
(2 answers)
Closed last year.
I need to extract a number from the output of a command: cmd. The output is type: 1000
So my question is how to execute the command, store its output in a variable and extract 1000 in a shell script. Also how do you store the extracted string in a variable?
This question has been answered in pieces here before, it would be something like this:
line=$(sed -n '2p' myfile)
echo "$line"
if [ `echo $line || grep 'type: 1000' ` ] then;
echo "It's there!";
fi;
Store output of sed into a variable
String contains in Bash
EDIT: sed is very limited, you would need to use bash, perl or awk for what you need.
This is a typical use case for grep:
output=$(cmd | grep -o '[0-9]\+')
You can write the output of a command or even a pipeline of commands into a shell variable using so called command substitution:
variable=$(cmd);
In comments it appeared that the output of cmd contains more lines than the type : 1000. In this case I would suggest sed:
output=$(cmd | sed -n 's/type : \([0-9]\+\)/\1/p;q')
You tagged your question as sed but your question description does not restrict other tools, so here's a solution using awk.
output = `cmd | awk -F':' '/type: [0-9]+/{print $2}'`
Alternatively, you can use the newer $( ) syntax. Some find the newer syntax preferable and it can be conveniently nested, without the need for escaping backtics.
output = $(cmd | awk -F':' '/type: [0-9]+/{print $2}')
If the output is rigidly restricted to "type: " followed by a number, you can just use cut.
var=$(echo 'type: 1000' | cut -f 2 -d ' ')
Obviously you'll have to pipe the output of your command to cut, I'm using echo as a demo.
In addition, I'd use grep and then cut if the string you are searching is more complex. If we assume there can be all kind of numbers in the text, but only one occurrence of "type: " followed by a number, you can use the command:
>> var=$(echo "hello 12 type: 1000 foo 1001" | grep -oE "type: [0-9]+" | cut -f 2 -d ' ')
>> echo $var
1000
You can use the | operator to send the output of one command to another, like so:
echo " 1\n 2\n 3\n" | grep "2"
This sends the string " 1\n 2\n 3\n" to the grep command, which will search for the line containing 2. It sound like you might want to do something like:
cmd | grep "type"
Here is a plain sed solution that uses a regualar expression to find the number in your string:
cmd | sed 's/^.*type: \([0-9]\+\)/\1/g'
^ means from the start
.* can be any character (also none)
\([0-9]\+\) are numbers (minimum one character)
\1 means it takes the first pattern it finds (and only in this case) and uses it as replacement for the whole string

Resources