I wanted to use a search box and enter an input text. Multiple search boxes exist in the different left panels. Once I click any link from the left panel, it takes me to a specific page that contains a search box. How to write one common search box identifier and use it everywhere
Following are search box identifiers on various pages.
data-testid="leftpanel1-searchInput"
data-testid="leftpanel2-searchInput"
data-testid="leftpanel3-searchInput"
Cypress uses CSS selectors, and your answer is available right in the Cypress documentation here
Though below works with both cy.contains() and cy.get(), you no need to use contains. Simply put, cy.get('[data-testid$=-searchInput]');
[data-testid*='leftpanel1'] this will select all elements or you can say it's common search box identifier
I am trying to redirect the Taxonomy term path/url to a custom panels/page, I found several posts from around the web about that and tried to implement the instructions but they did not work and I am doing something wrong. For example I tried what I thought was the closest to my situation found here and in the following quote but it did not work and the Taxonomy views was already disabled in the first place on my end.
Disable the Taxonomy term view.
Set the path on the panels page to /taxonomy/term/%.
Clear cache.
View page at taxonomy/term/{tid}.
I verified that this also works with URL aliases.
Can someone provide clear directions for the following
Pages/Panel screenshot
What do I enter in,
Page information
Page parameters
Page access
Variants: contexts
Variants: selection criteria
I've tried all kinds of different settings ("/taxonomy/term/{tid}", "/taxonomy/term/%", "/taxonomy/term/{taxonomy_term}", "/taxonomy/term/112") and changing Home>>Administration>>Configuration>>Search and metadata>>url alias settings but every link just goes back to the default taxonmy term page.
I solved the issue. If any body needs the answer here it is.
To change the page/layout of a taxonomy term first go to page manager (Home >> Administration >> Structure ).
You might see a page called "Taxonomy Term", that's where you want to start to make changes so click on that. If not you'll have to create on page. Both can be addressed by the following steps.
This example will show you how to create and use different layout for a different term page.
Go to Structure > Pages (/admin/structure/page_manager) and click on Edit button under Taxonomy Term row. On the right side you will see Default
These are variants. The Default variant at the bottom affects all the taxonomy/term pages. All other above variants overrides the Default variant using certain conditions a.k.a "Selection criteria".
Click the Add variant button to add a new variant.
Enter Label for the variant and choose "Panels" under the Type dropdown menu.
Choose "In-place Editor" for a Builder
Choose Layout for the page.
Enter [term:name] for Page title. This token holds the name of your taxonomy term. Now click on the Finish button, you will add block later.
Click on the Selection criteria.
Choose "Request Path" for a condition and click on the "Add condition" button.
Add taxonomy term page url's you wish to override (e.g. taxonomy/term/25).
Go to one of those pages (e.g. taxonomy/term/25) and add blocks.
Note that your variant must be positioned above the variant you override to work properly. Use the Reorder variants button to reorder your variants.
You can repeat this procedure if you wish to target a different terms also or a vocabulary. You can have as many variants you want.
I'm using Primefaces' selectManyMenu to display a list of hundreds of items. I've also included a filter on top. The issue is that when I select, say, the 200th item in the list, I have to manually scroll down to the 200th item each time to see if it has been checked.
I want it so that whenever I select an item, it moves to the top of the menu, so that it is easy to view all the selected items from that list at the top without having to scroll down and up all the time.
Any suggestions?
Looks like your component is getting updated when selecting or unselecting an item, and that's the reason you're reloading the list and losing your scroll position.
Else, it looks like you could use a workround for this. Something like
Catch the select/unselect/change event and trigger a backing Bean function where
You rearrange you list of items sot that the selected ones will be pushed first
oncomplete, you will update your selectManyMenu component.
By the way, maybe it's time to think again if you're using the right component and UX practice. and I have the impression that selectManyMenu is not meant to be used with lists of 200+ items. Personally I think you should avoid using a list that will have to scroll down, for selectMany components. For example you could use another component like a pickList
I want to add dynamic menu table in inner pages based upon the tabs on the home page.
how to do that in joomla,please help me.
It sounds like you are trying to create a split menu where the link you click at the top determines the menu that shows up in a column/below. This is the native behavior for Joomla menus simply by setting the start and end levels in the menu module. Here is a good tutorial -
http://www.theartofjoomla.com/magazine/article/27-more-menu-tricks-the-split-menu-technique.html
Beware:: The split level menu feature in Joomla only works when the split equals TWO levels. If you want to build your site with a single master menu that spans 3 or more levels, this does not work. It looks like the internals of Joomla do not know how to track the parent properly (not really sure) when the menus are generated (probably an overstatement). Level 1:1 works, Level 2:2 works but then when you try to specify a menu starting at level 3, it breaks. In my case, I hacked the menu to check the pathways (breadcrumbs) list and derive what I wanted from it so I could determine the real parent of the items at level 3 (or other). Then I could get the items to generate proper. This was a disappointment in Joomla (v1.7). And then on top of this, you would then have to hack further to ensure that each menu item instance starting at 1 is highlighted proper. Perhaps the menus should be more closely coupled to the breadcrumbs pathway list.
I want to provide my users with an 'advanced' search engine.
I basically have a lot of search criteria to chose from :
some are very simple/common and will be largely use (ie time period, item id)
some are a bit less mainstream
and some won't be used a lot, but I still want to provide them
Overall, I have around 30+ criteria to chose from
The result is a dataset which I display in a grid.
I've search for inspiration on internet, and even google doesn't seem to have a nice solution for advanced search.
I've designed this kind of tools in the past, and I wasn't really pleased by the result, although the user were eventually able to use it quite effectively.
Do you think the search panel should be visible all the time (ie displayed on top of my result grid) or available in a separate form (which would let me use more place for all the controls)
Do you think it's better to display all the search criteria, or to let the user click on 'advanced' if he wants to see/use more criteria
How would you organize the criteria? by usage frequency, or rather by area (ie. criteria related to user, to location, to time, etc.)
Where should I put the 'Search' button? next to the more common search controls, or at the bottom, or both?
And more generally, do you have tips you want to share on how to design a nice search UI ?
What kind of functionalities do you usually miss in this kind of 'advanced' search engines?
Not an expert on UI, but I have seen a lot of bad UI.
KISS is a good start.
Make it intuitive.
Keep the search both at the top and at the bottom. I'd be loathe to use something that forces me to move up the page to type (see Flex documentation, their pagination control is only at the top -- a miserable pain you know where).
Organization of criteria should be two-fold:
basic operators (20%) which 80% will use up-front
dynamically edit the set of criteria available at any time.
Get the users started with least ramp-up time and allow them to add/remove criteria on a as needed basis. The idea is to make him use something he needs and not clutter his thought or workflow with the brilliance of your feature set.
As others have mentioned and is the trend nowadays with UI in general, use controls that are hidden until and unless the user explicitly wants advanced/fine-tuning (on-demand UI).
A good rule of thumb is to have a maximum of 5-7 features on a page.
It'd be great if you can arrange the criteria in such a way so as to make a story out of it i.e. the user can read his query and your operators make some meaning out of it.
I'm a big fan of little text and easy to comprehend icons but such a setup depends on your installation environment. Can your grandkid use that mighty workhorse?
Good design also necessiates that you make your UI accessible. That's a tough nut to crack and I have absolutely no idea how you'd do that.
Best of luck!
I tend to like the "list of rules" approach. You know the one:
Find items that match [ All |v] of these conditions:
[Name |v] [Contains |v] [_____________] (-) (+)
[Start date |v] [Is before |v] [_____________] (+)
(Cancel) (Search)
This keeps the dialog from getting too cluttered but still gives users all the options they might need.
But that assumes you need things to be that advanced! You might find that an intelligently-designed keyword list approach will work fine.
Keep the advanced controls hidden by default. Your search input and action button should always be visible and given prominence, regardless of whether or not your advanced controls are visible. Make sure that showing/hiding the advanced controls does not change the location of either the primary input or button - those need to remain static so the user's spatial memory is not affected.
As for the advanced controls, without knowing exactly what type of data you need to show, I can only give an overview of potential organization methods. Personally, I like LATCH:
Location
Alphabet
Time (timeline or chronology - think of a history museum)
Category (think department stores)
Heirarchy (biggest to smallest, lightest to darkest, etc.
Depending on your controls, one of those will make the most sense. Organize accordingly. If you can use a slider or range input (for example, 'lightest', 'lighter', etc.) rather than a list of checkboxes/radios, this is preferable as it reduces the number of visual elements on the page.
Forget about the "plus/minus 7" rule - that has been taken completely out of context by folks who did not actually read the study. In short - it's only applicable to the human's response to external stimuli, not options displayed on a screen. This isn't saying you should go overboard, but even if you have a lot of options, you can visually tweak them. Clutter is a failure of design - not information.
Remember to use plenty of whitespace and <label> elements to give each option a good-sized click target. This is especially important when dealing with checkboxes or radios.
Make sure that when the results are returned, there is a clear title (<h2> or <h3> usually suffices) re-stating the user's query, and how many results were returned. Don't forget about a 0 results page! Offer some advice on broadening the query, if possible.
Just a general advice: keep it simple. To much choice confuses the user and increases the chance a certain piece of functionality is not used.
Try different prototypes on users to findout which options are valuable and which are not.
1) Do you think the search panel should be visible on top of my result grid?
A simple search panel like Google’s basic search may be on the Results page since it’s compact. This allows the user to re-try the search with different criteria without wasting time going to a new page or window. Advanced search is much more cluttering so there’s a more important tradeoff between easy access to the results (in a smaller pane) and easy access to re-search, so you need to appraise the frequency users re-searching versus the work they do with the results. For example, if re-search happens 50% of the time, but including an Advanced Search panel in the Results page requires additional scrolling 75% of the time, your users are better off without an Advanced Search panel on the Results. As a general rule, Advanced Search should not be on the Results page unless the task is really cut-and-try exploration of the data.
Another issue with the Search panel at the top of the results is what to do if the results do not correspond to the criteria (e.g., if the user changes a criterion after the results are shown but before clicking Search again). With Advanced Search it is much easier for users to forget or miss whether they changed a criterion or not and then be confused about what criteria is in effect for the results. Putting Advanced Search on a separate page prevents this, although there are other ways to avoid this problem if Advanced Search is on the Results page (e.g., using instant-apply “faceted” search).
In any case, the Results page should display the criteria used in making the search.
2) Do you think it's better to let the user click on 'advanced' for more criteria?
For most database apps, users of a particular group (e.g., job position) have 2 to 5 specific sets of search criteria that get them through the vast majority of their work, (e.g., search for orders made between two user-supplied dates), sometimes including criteria that even have specific criterion values (e.g., search for all orders with a pending status). In this situation, users will be fastest and least likely to be confused if you have an Advanced button for ad hoc searching, while the default search has controls tailored for these specific searches. Default to Advanced Search only if your users will primarily be conducting exploratory ad hoc searches.
3) How would you organize the criteria?
If there are certain criteria that are used especially often, then they’re handled through Basic Search as described for 2, so there’s little advantage to sorting criteria in Advanced Search by frequency. It just makes it hard for users to find the criterion they’re looking for. Generally you can rely on users having a specific named field in mind, so sort the criterion alphabetically, or, if users are familiar with the Results Page and its fields are laid out in a manner consistent with how the users think, use the same order as used for the Results columns.
4) Where should I put the 'Search' button?
The Search Button ideally should always be visible. The best solution is to have all the criteria on a scrollable pane with the button outside the pane. Putting the button at the top and bottom is a common but kludgey alternative. I wouldn’t put it by the common criteria because if your users have gone from Basic to Advanced Search, they’re probably not using common criteria. Consider no Search Button if you can keep response time under 500 ms, instead providing instant-apply like seen in Vista.
5) How to design a nice search UI?
For field-based multi-criteria Search, there are two basic designs:
a. A form of all fields with a place to enter criterion values for each field. The problem with this is fields with set values can scroll out of view and users may have forgotten they’ve set a value. Thus you want to keep this as compact as possible. See the chapter Improving Data Retrieval in Alan Cooper’s About Face 2.0 for one approach. You can also provide a summary string of the selected criteria near the Search buttons which the user can check. Clicking each criteria in the string can even jump the user to the criteria for changing it.
b. The user selects from a list of fields those to be used in the criteria, then sets the values for the criteria in consolidated location. The main challenge here is to minimize the number of “overhead” clicks to select a field. Ideally, the list of fields are always available and one click selects the field, puts it in the consolidated location, and places the cursor in the value control, something like shown in http://www.zuschlogin.com/content/blogimages/37/FindAdvanced.gif, only for Search rather than Find. (By arbitrary convention “Find” is very different than “Search” for users; Find highlights things within the current page matching a given criteria while Search retrieves things matching a given criteria)
Both of these designs link the criterion for each field by logical ANDs and are limited in the joins among the underlying database tables, but that is likely satisfy nearly all your users. If the tasks require more complicated joins and Boolean combinations, look into graphical querying designs (e.g., Badre AN, Catarci T, Massari A, & Santucci G 1996. Comparative ease of use of a diagrammatic vs. An iconic query language. In J Kennedy & P Barclay (Eds) Interfaces to Databases (IDS-3): Proceedings of the 3rd International Workshop on Interfaces to Databases, Napier University, Edinburgh, 8-10 July) and Query by Example designs.
The default design pattern which I use is Filter Table. That covers maybe 90% of the use cases. For more complex searches, I would need more specific information on the goals and use cases of the users, so that it would be possible to design a more optimal solution for those situations.
Simple is good. I'd recommend an iterative approach where you slowly build functionality after doing user acceptance testing and watching the logs to see which features that they use (or don't use). The only way you'll know what to improve is to watch your users.
Try to keep the interface as simple as possible. Most users will only need a text window and a search button. The remaining options can be put inside of an advanced search option.
This setup is friendlier for new users, as well as helping to conserve resources by saving the more expensive advanced searches for people who actually need them.
my thoughts:
-Only show advanced criteria when it is desired. Search is a great thing when it is made as simple as possible to the people trying to search.
-If there is some very large set of search criteria for advanced searches: do not clutter the results with it. Make it very easy and obvious for a user to go back and modify the criteria, but don't try to waste space on the results by giving them their criteria again right off the bat.
-Organization of criteria is hard to say without knowing it all. but as others have/will say: make it simple! You might not need to show it all at once: let me expand areas if i want more, hide stuff i don't want to use. and then put a search button at the bottom of it. But again, I won't want to scroll through a page of random criteria just to find this button.
There should be a search text box as a part of the mast head on every page of the site.
I prefer that the button be labeled "find" instead of "search" because benefits are always more compelling than features.
What should be sophisticated is your search algorithm and not the GUI.
Please find my answers(in normal text) against each of the questions(in italics) asked.
"1) Do you think the search panel should be visible all the time (ie displayed on top of my result grid) or available in a separate form (which would let me use more place for all the controls)"
Display on top of result grid as this leaves extra horizontal space to display search results and thereby to display more columns of search data without scrolling horizontally.
"2) Do you think it's better to display all the search criteria, or to let the user click on 'advanced' if he wants to see/use more criteria"
Display all available criteria but in a tabbed fashion. i.e. categorize input search fields into categories and have a tab for each category.
"3) How would you organize the criteria? by usage frequency, or rather by area (ie. criteria related to user, to location, to time, etc.)"
Organize 'by area' because different people like using different criteria.
Each criteria would have tab of it's own. But organize the tabs in the order of 'more popular' to 'less popular' as you think. In your case tabs may be 'By Name'(containing fields first name, middle name, last name, mother maiden name, nick name, father's name etc), 'By Location' (place name, county name, district name, state name, country name etc)
and so on until the advanced tab(where you'd put least used fields).
"4) Where should I put the 'Search' button? next to the more common search controls, or at the bottom, or both?"
Put the input fields of search as discussed above in a tabbed fashion categorizing them based on 'type of field'(I'll refer to this area as search grid). Then put action buttons such as 'Search', 'Clear/Reset' just below the search grid aligning to the center(I'll refer to this area as button grid).Then put the search result pane below the button grid as more horizontal area is available for display so that maximum columns can be displayed at once.
Take a look at quince, the infragistics ui patterns site: http://quince.infragistics.com.
Personally, I'd look at using a filterable grid, like the xtragrid from DevExpress: http://www.devexpress.com/Products/NET/Controls/WinForms/Grid/datafiltering.xml
coupled with a search bar above it to initially populate the grid.
Don't think this has been mentioned yet but dont forget that you will also need to initiate the search when the user presses enter in any of the search fields. Probably aware of this already, but worth mentioning anyway.