When I tried to output the log using google.golang.org/appengine/log, I got the following error in logging.
internal.flushLog: Flush RPC: Call error 1: call /logservice.Flush is not registered
Anyone know how to resolve this?
GAE/Go 1.16
You have to use google.golang.org/appengine/v2 for Go 1.12 or later.
See here.
I am using terraform on my Mac system, and terraform apply results with below error
Error: command "bash" failed with no error message
on ssm.tf line 7, in data "external" "ssm-dynamic-general":
7: data "external" "ssm-dynamic-general" {
However there is nothing wrong in ssm.tf file, same runs perfectly fine in my another system.
Can some one please let me know what i am missing here?
You might have done what I accidentally did: not follow the external program protocol:
https://www.terraform.io/docs/providers/external/data_source.html#external-program-protocol
In my particular case, I failed to send the errors that were coming from my program to standard error. Instead, those errors were going to standard out.
That's why Terraform wasn't able to report on those errors.
So if you send any and all errors from your program to standard error using > &2, you should be able to see those errors when you run terraform plan.
I am using MSBuild. I have Java 8 installed.
I am running the following commands:
SonarQube.Scanner.MSBuild.exe begin /k:"ABC" /d:sonar.host.url="http://localhost:9000" /d:sonar.login="8b839xxxxxxxxxxxxxxxxxxxxxxx6b00125bf92" /d:sonar.verbose=true
"C:\Program Files (x86)\Microsoft Visual Studio\2017\Professional\MSBuild\15.0\Bin\msbuild.exe" /t:rebuild
SonarQube.Scanner.MSBuild.exe end /d:sonar.login="8b839xxxxxxxxxxxxxxxxxxxxxxx6b00125bf92"
The last step fails:
ERROR: Error during SonarQube Scanner execution
ERROR: The 'report' parameter is missing
ERROR:
ERROR: Re-run SonarQube Scanner using the -X switch to enable full debug logging.
The SonarQube Scanner did not complete successfully
12:53:21.909 Creating a summary markdown file...
12:53:21.918 Post-processing failed. Exit code: 1
The MSBuild version is greater than 14.
Java 8 is properly installed. Documentation indicates that Java 8 is adequate.
Any idea on what could be wrong?
Where do I add the -X switch? I tried on all 3 statements
Update :I installed Java SDK 9. Still same issue.
Update :With verbose logging and using /n naming parameter:
INFO: Analysis report generated in 992ms, dir size=4 MB
INFO: Analysis reports compressed in 549ms, zip size=1 MB
INFO: Analysis report generated in C:\ABC\.sonarqube\out\.sonar\scanner-report
DEBUG: Upload report
DEBUG: POST 400 http://localhost:9000/api/ce/submit?projectKey=ABC | time=1023ms
INFO: ------------------------------------------------------------------------
INFO: EXECUTION FAILURE
INFO: ------------------------------------------------------------------------
INFO: Total time: 54.833s
INFO: Final Memory: 51M/170M
INFO: ------------------------------------------------------------------------
DEBUG: Execution getVersion
DEBUG: Execution stop
ERROR: Error during SonarQube Scanner execution
ERROR: The 'report' parameter is missing
ERROR:
ERROR: Re-run SonarQube Scanner using the -X switch to enable full debug logging.
Process returned exit code 1
The SonarQube Scanner did not complete successfully
Creating a summary markdown file...
Post-processing failed. Exit code: 1
I've struggled the same problem with SonarQube and I've finally found a solution:
You need to restart sonar service after using evaluation token.
Please note this isn't the answer, however I feel this feedback is valuable to getting this question answered.
I can reproduce this issue in POSTMan with a POST request to:
http://localhost:9000/api/ce/submit?projectKey=myProjectKey
This returns
{
"errors": [
{
"msg": "The 'report' parameter is missing"
}
]
}
You can get a similar error by removing the projectKey query parameter. I tried adding a report query parameter and received the same error:
http://localhost:9000/api/ce/submit?projectKey=brian3016&report=report
Given this, I feel there is a problem with their code. It should have included a report parameter when creating the POST request, but it failed to do so.
Verbose output seems to have changed from using the -X switch to /d:sonar.verbose=true. E.G.
SonarScanner.MSBuild.exe begin /k:"myProjectKey" /d:sonar.host.url="http://localhost:9000" /d:sonar.login="myLogin" /d:sonar.verbose=true
Note the verbose logging didn't give me any valuable insight.
(Also note that the documentation currently says to use SonarQube.Scanner.MSBuild.exe, but the verbose logger told me to switch to SonarScanner.MSBuild.exe)
SO...how we we report this issue to someone that can fix it? Their documentation says to go to Stackoverflow. So here we are.
I thought it may have been an issue with a project. So I created a new project with nothing other than the startup template Console Application. Same error.
In my case SonarQube 7.9.1 (deployed with Helm to Kubernetes cluster) was missing temp directory /opt/sonarqube/temp/tc/work/Tomcat/localhost/ROOT after Helm rollback. No idea what happened to it.
Logfile /opt/sonarqube/logs/web.log inside SonarQube pod had this error:
2021.02.02 06:57:03 WARN web[AXdZ6l6MParQCncJACv3][o.s.s.w.ServletRequest] Can't read file part for parameter report
java.io.IOException: The temporary upload location [/opt/sonarqube/temp/tc/work/Tomcat/localhost/ROOT] is not valid
The fix was to exec into pod and create the missing directory. Would like to know the reason though...
The issue is with the sonar service starting up.
First try to stop the SonarStart.bat by using Ctrl+c, and then try to open localhost:9000 ( or whichever port you configured sonar server).
If it is still opening then go to task manager and search for wrapper.exe service and stop the service. If no service is found then go to:
Task manager>Details> and stop all java.exe process.
Note: If you running many Java applications, right-click the java.exe and choose goto service, and stop only those java.exe that belongs to AppX deployment.services
Now start sonarstart.bat as administrator..
today i face the same error when using jenkins to scanner the code.
get the error when POST /api/ce/submit and get 400 code by add the sonar.verbose=true
i use the below step to check reason
first to restart the sonarqube => failed
check the report file size by using "du -sh" get 108m and DB server support 1G => failed
login the sonar-qube server and check the access.log, web.log and another log, finally find the error reason " Processing of multipart/form-data request failed. No space left on device", so i check the server by command "df -h", some devices are used 100% => so i remove some no-using file and fix it!!!
check if you have enough memory
ex: free -m
In my case I had to upgrade memory.
I imported a new code into Xcode and I am getting this error:
Command
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/swiftc
failed with exit code 1.
How do you fix it?
Try cmd+alt+shift+k. This cleans your derived data and might fix the issue.
As far as I know there can be multiple reasons why a compiler fails. Although cmd+alt+shift+k will help most of the time. If this fails, then click on the error message and try to debug it.
For example in the image below, if you read the message, we get to know that, there has been a name duplication. Fixing the name duplication will fix the
I am using Papertrail to monitor my heroku app and it seems that I am getting this same error repeatedly:
app/web.2: ** [NewRelic][12/13/13 17:14:17 +0000 f00d3735-79e0-4b0a-9e0d-9315444e2641 (2)] ERROR : Error running task in worker loop, likely a server error:
I read in the ruby docs here that this is probably:
This is probably a server error which has been logged in the server along
# with your account name. Check and see if the agent listener is in the
# stack trace and log it quietly if it is.
I am not quite sure how to debug it and would love some help. Thanks!
Please let me know if my source code would be helpful