I have Informatica 9.5 installed on a Windows 2008 server. I've recently had to restart the Informatica Service because I was unable to connect to the Informatica Integration Service. As a result of restarting the Informatica Service, the Admin Console does not come up. Sometimes, it hangs or I'll get, "The site can't be reached" error. I've tried going to the site on the server where Informatica application runs, and my pc. I get the same behavior on both machines. Also, on the server, I've tried http://localhost:port/administrator. Same behavior. Before restarting the Informatica Service, the Admin Console came up. Is there a service that did not start?
Related
I have installed Hyperion EPM 11.1.2.4 in CentOS 7 i.e Foundation Services, Essbase and Financial Reporting. The database I have used is SQL Server.
CentOS is not the officially supported OS for Oracle HTTP server and hence I went ahead with Weblogic HTTP server.
Once I start the weblogic server and start all the EPM services, and when I login into the weblogic server administration console, I find my foundation services server in Admin state
Also when I login into my Oracle Fusion middleware, I can see all my foundation services and financial reporting Servers down.
And hence I am unable to access the servers like workspace, calculation manager.
But few of my servers are up and are in running state such as APS, CALC, EAS, EPMAWEBTIER. But I only can access Essbase.
I request you to check the images attached.
Oracle Weblogic Administration Console
Oracle Fusion Middleware
How can I access these servers?
Am I having these much of troubles just because I used weblogic HTTP server instead of Oracle HTTP server?
if you are installing EPM for learning purposes, I suggest you to take the easy way and use a supported OS. Installing this software into a non supported OS will give you additional problems that you will never be sure if are caused because the non-supported OS, or because your installation / tuning is wrong.
If you download and install a Windows Server VM, it would not expire, just show you the active license message, but it will be full working.
For learning purposes / temporal Virtual machines, it is way to go.
Thanks.
Iam able to open the admin web page just after installing informatica 9.6.1 on windows 10, but when i restart my machine (or when laptop went to sleep mode) again when checked the admin page says
"This site can’t be reached <hostname> refused to connect."
URL is <my machine hostname>:6008/administrator/
Is there something going wrong with the 6008 port after installation?
I used this URL for installation
https://www.edureka.co/blog/informatica-installation/)
I searched a lot on the internet but could not fix this issue.
Tried start/stop Informatica services, dint work.
please help
I had same problem while working on windows system with Informatica 9.6.1.
I believe any of the 3 processes: pmrepagent, pmserver and tomcat/JAVA services
is/are not running. In simple words Informatica is not up and running.
This helped me out.
open Command prompt in Admin mode
cd C:\Informatica\9.6.1\tomcat\bin
infaservice.bat startup
for more details refer this KB article
https://network.informatica.com/thread/43165
If you have also faced such problem while connecting to Informatica post installation then i recommend to check if you are well connected to the database which you opted while installing informatica (For eg. Oracle,sql server etc) with the same user and password which was seperately created to link the database with informatica.
If still you cannot open the Administrator homepage then you can cross check if the Informatica services are already started.You can restart the service if it is stopped and then the homepage will get open.
Seems like the service is not started. Please check the services and make sure Informatica is set to start automatically and that it's able to connect to DBMS where repository DB has been created.
When i installed Informatica that time i was able to login to admin console. But after restart i got - "site refused to connect " error. My informatica service & oracle db serv are running. But still i could not able to login to admin console. What is did was - i login to the schema what i used while installing informatica server through dbeaver tool. On my astonishment, after that im now able to connect admin console.
I found another error that caused this kind of issue.
Check in your system where information is installed and search for "Catalina.out"
See the error:
org.apache.catalina.loader.WebappClassLoaderBase clearReferencesThreads SEVERE: [localhost-startStop-2] The web application [/csm] appears to have started a thread named [phoneHomeScheduler] but has failed to stop it.
This is very likely to create a memory leak.
You need to restart the system and re-process the services.
I have installed WebSphere portal in my local machine , it was running fine till now.Today i installed IBM HTTP server and suddenly my web sphere portal is not starting .
I have a WAS profile, web sphere portal server and ibm http server in my local machine which is running windows xp. All these are configured to run as windows service , now when i attempt to start the portal server i get below message:
WASService running at the same time for 'IBMWAS70Service -WebSphere_Portal_V$AIN' Service not started
Any input on this will be appreciated.
I restarted my machine and things worked fine :). Mostly likely there was some services created in windows services with same name or something of that sought which was rectified once i restarted my machine.
I have an AWS server (MS SQL SERVER EXPRESS 2008 R2 with IIS), with an elastic IP of 54.214.8.111, security groups configured with HTTP, MS SQL and FTP, and I can connect to the remote virtual machine using the rdp file that amazon gives you in the console.
However when I try to connect via visual studio to test if the database is working, it gives me a "Login failed for user 'dbuser' error. I have a user called dbuser on my SQL Server (on the server side of course) with full access permissions etc. I also cannot connect to an ftp on the server, despite all guides and help doc. Something seems to be simply blocking my connection. I have tried the same thing on multiple computers.
Everything seems to be configured correctly except I suspect the server instance.
Can anyone help? PS I'm fairly new to web development, this is my first AWS EC2 server.
[UPDATE] I just tried to create a new instance in a different location, same thing, maybe I don't know how to configure the SQL Server on the EC2?
It appears that by default EC2 SQL instances have SQL authentication disabled.
In SQL Management Studio, connect as the built in Administrator account, then go to
Server Properties>Security>
Under Server Authentication, change to "SQL Server and Windows Authentication Mode"
Restart SQL
Your local accounts should now work
Try running in elevated mode (right click Visual studio and run as Administrator), solved some issues I was having recently.
Hoping someone else has already encountered this and has a solution...
I'm trying to install the AppFabric Beta 1 caching service, on a virtual Windows Server 2008 (CacheServer1). My cache configuration information will be held in a SQL Server database on a separate server (SQLServer). As AppFabric only supports Integrated Security for SQL Server, both servers are in the same domain, and I'm installing using an account that has db_owner rights to my VelocityConfig database.
When I run the AppFabric installer and get to entering the connection string for my SQL server, I put in the server name, but when I click the combo box to get the list of databases from the server, it thinks for a minute and then I get a timeout error.
Both servers can ping each other, and I've created a .UDL file on CacheServer1 under the same user, which can connect successfully to SQLServer and retrieve a list of databases.
Can anyone suggest what I need to do to get the installer to succeed?
The solution I found to this was to install the SQL 2008 Client Connectivity bits on CacheServer1, once this was installed I could get a list of databases. Still can't get AppFabric to install successfully but that's another problem for another question I think...
To ensure that there is no network/DNS issues, can you try the following:
1. Use IP address instead of hostname.
2. Are you able to connect to sql server via sql server mgmt studio running on CacheServer1?