I am trying to Run setup.exe as part of Oracle 19c installation on windows 10.
I have downloaded the zip file and extracted it in a folder inside C drive.
When I try to run setup.exe by right click and run as administrator option, a command prompt just flashes for a split of a second and nothings starts after that.
I have found the solution:
After extraction, rename the extracted directory to db_home
Move the db_home directory to the root of your Hard Drive ( in my case its C:\db_home )
run setup.exe as an administrator.
You will see a cmd window pop up and then the red window with the Oracle symbol in it.
Do NOT skip step 2nd step as that is how I was finally able to get it to install.
This also worked with 19c.
I also faced the problem. After seeing this thread, in a while, I figured it out. Apparently, keeping the db_home folder inside a folder that has space in its name caused me the same issue.
I had the same problem and read something about problems with extremely long paths in packages and using the native Windows unzip utility. I unzipped the package using 7-zip instead and it solved the problem.
I was trying to install from d partition and does not work. Then I just move all the installation folder to c partition and it works fine.
I'm an Oracle DBA and I don't know when the change happened or what the source of issue is, but when installing the Oracle client you can no longer have a space " " in the path for the Oracle setup.exe file.
It doesn't matter what utility extracted the files or what drive or path is used (except there is and always has been an issue with very long path names) - it just cannot have a space in the path.
I hope this helps.
This issue has a simple solution:
When we run the Setup file we see a flash CMD in the background...
Your System Environment variable path(DB home) has Space in it.
It should be no space(db_home)
This personally works for me to install.
Related
When i try to execute "solana-test-validator" command in my terminal, i get error and it says:
"libcrypto1_1-x64.dll not found"
"libssl-1_1-x64.dll not found"
I searched everywhere and i looked every solana-test-validator related error things but i never be able to solve my problem.
Here is how I solved it. The solution is in the problem. It needs those two DLL files. Therefore, find a correct version of the both the DLL over the internet and paste in the solana active-release path or if you have zoom installed, you can copy the DLLs from there.
Zoom Location - C:\Users\Asus\AppData\Roaming\Zoom\bin
Solana Active release - C:\Users\Asus\.local\share\solana\install\active_release\bin
Once you copy paste the DLLs, just start the CMD as an admin and run
solana-test-validator
I solved my problem by reinstalling the Ubuntu terminal.
I am installing a package with docker and apparently the file structure of this package contains large paths.
The installation fails with this file:
"C:\S\src\vendor\shopware\administration\Resources\app\administration\src\module\sw-cms\elements\product-listing\config\components\sw-cms-el-config-product-listing-config-filter-properties-grid\sw-cms-el-config-product-listing-config-filter-properties-grid.html.twig"
and the error that Windows cant find the path specified.
The path is 265 characters long and Windows cannot create it unfortunately.
I already set "LongPathsEnabled" to True in my Registry and rebooted, however the error still appears.
Do you guys know a solution to this?
Any help is appreciated :)
I solved it by running the docker file in a WSL terminal
I am trying to install mingw-w64 onto Windows. However I receive an error, "the file has been downloaded incorrectly". Redownloading the setup file again from sourceforge does not fix the problem. Is there an alternative way to install it or am I doing something wrong?
Old post but same problem, the installer doesn't seem to work.
I give the solution which works for me
You can directly download the archive of MinGW64 with your chosen configuration :
https://sourceforge.net/projects/mingw-w64/files/mingw-w64/
Once the compressed file downloaded, you have just to extract and copy/paste the MinGW64 folder( with the pre-compiled librairies) to your chosen folder ( in my case : C:\mingw64)
I got same error and solved it, after struggling a few hours. You should download MinGW64 via https://winlibs.com/#download-release.
After downloading, You should unzip mingw64 file to a folder(in my case I unzipped it to c disk; C:\mingw64)
And then you have to set up path. for that follow below steps;
open settings.
Search for Edit environment variables for your
account.
choose path variable and then select edit.
Select New and add the Mingw-w64 folder path(bin folder). In my case, I added (C:\mingw64\bin).
Select OK to save the updated path.
And reopen your cmd, then check if everything is good by typing; gcc --version
Long story short, the official installer is broken and not been fixed for years, so we have to install it manually.
The official download link above would bring you to sourceforge: https://sourceforge.net/projects/mingw-w64/files/Toolchains targetting Win32/Personal Builds/mingw-builds/installer/mingw-w64-install.exe
And in the same folder that contains the installer, there's a repository.txt. (about this file)
Take a look at it, the installer basically just download and unzip the build from one of these urls within repository.txt. Choose the url you want and download/upzip it manually. (In my case, I use 8.1.0|x86_64|posix|seh|rev0 setup)
Last, setup the Path environment variable pointing to your unzipped bin folder, let say C:\mingw64\bin, and this should do the trick.
Finally, I solved this problem by downloading this:http://winlibs.com/
GCC 10.1.0 + LLVM/Clang/LLD/LLDB 10.0.0 + MinGW-w64 7.0.0 - release 3 (LATEST)
Win32: 7-Zip archive* | Zip archive
Win64: 7-Zip archive* | Zip archive
and set the %path%
After that, I still can't execute gcc correctly, but then I solved the problem by adding this environment variable:
"CGO_ENABLED=1"
I encountered the problem when using this golang package: https://github.com/mattn/go-sqlite3
I received the same error. When I re-ran the installer as an adminstrator it was installed successfully.
I also made sure not to add any spaces to the installation path.
Following this tutorial helped me manually install MinGW for windows : youtube
So the problem for me was that when I tried to use the .exe installer, it either showed me that,
"the file has been downloaded incorrectly" , or , the /.../bin folder did not have any files in it.
In the link above, the MinGW files (including the /bin files) were manually downloaded and identified properly by the Environment Variables.
The problem is with your internet connection and/or ISP. I'm not great at networking so I'll let others be more specific. I tried installing/downloading it using my mobile's data as wifi hotspot and it worked. Hope it helps
I installed the JDK8u40, but only find the javafx-src.zip.
Where can I find the source code for JDK? The src.zip?
Below is what I get after installation:
And btw, I didn't see the installation wizard! This is quite strange.
ADD 1
Today I tried several Java installation packages. All are downloaded from Oracle official site.
jdk-6u45-windows-i586.exe
jdk-7u75-windows-i586.exe
jdk-8u20-windows-i586.exe
jdk-8u25-windows-i586.exe
jdk-8u31-windows-i586.exe
jdk-8u40-windows-i586.exe
Both 6u45 and 7u75 installed well on my box. I can see the install wizard. And the src.zip is installed.
But 8u25 ~ 8u40 all installed silently. And no src.zip file is installed because I have no chance to select it in the wizard.
I am not sure if this is my fault or someone at Oracle made a mistake.
As #SubOptimal commented, the /s option indicates a silent install. I am wondering if there's an option to force the GUI install wizard to open.
I am using Windows 7 Enterprise x64 Build 7601 SP1
Make sure the Source code is not disabled when downloading.
Then as you can see on the picture, selecting "Source Code" will tell you exactly where it is located.
Notice that I've downloaded the 32 bits version to make sure to reproduce the same use case as you.
Edit
As per your new edits and comments, it seems what you want to know now is why you don't see the installation wizards. I'm pretty sure this is due to old-set registry key.
Run the following command
reg query hklm\software\microsoft\windows\currentversion\installer\UserData\S-1-5-18\Products /f "java" /s | find "HKEY_LOCAL_MACHINE"
Now, navigate to each of the returned path browsing with regedit and delete their entire parent (the big hexa number).
Re-try the installation and I'm pretty sure you will see the wizard.
As for the sources, Oracle documentation specify how to download them in silent mode.
jdk.exe /s ADDLOCAL="SourceFeature"
This is the way I got the src folder from jdk-8u172-windows-x64.exe file without installing.
Step1: Download jdk-8u172-windows-x64.exe file (Java SE Development Kit 8u172) from oracle site
Step2: Extract it and navigate to the path:
\jdk-8u172-windows-x64.rsrc\1033\JAVA_CAB9
Step3: Right click on file named "110" and extract it.
You will get the src.zip file.
It took me little while to figure this out. I hope it will help others.
Enjoy debugging Good Code!
I don't know why/where the src.zip is, but as an alternative, if all you want is the source and somehow the proposed method doesn't work for you, you could always pull directly from the JDK8u40 source tree.
You will need Mercurial instead of Git. This link talks about the hg clone command
Quoting from the OpenJDK Java.net site
The corresponding master forest jdk8u can be cloned using this command: hg clone http://hg.openjdk.java.net/jdk8u/jdk8u;cd jdk8u;sh get_source.sh .
In addition, the source code for the last release, 8u40, is available by cloning the 8u40 master forest : http://hg.openjdk.java.net/jdk8u/jdk8u40. The final build of that release was tagged as jdk8u40-b25.
There are differences between OpenJDK and Oracle's, though subtle
download JDK 8 from following link
http://www.oracle.com/technetwork/java/javase/jdk-8-readme-2095712.html
src.zip comes in-built with it
if you JDK installer silently skips installing the source. just open the control panel > programs an features and find Java. Right click on it and select change and then select the
source (option) ;)
Download the JDK
Run the Installer, but stop right away
Extract src.zip from C:\Users\<your_username>\AppData\LocalLow\Oracle\ss180121.cab
You can extract .zip from .cab with tool like 7Zip
Taken from
I need to access some source code stored on SourceForge using CVS.
I used (many computers ago) to use WinCVS, so I downloaded it from SourceForge and installed it on this machine, which runs Windows XP 64-bit (latest SP).
However, during the second part of the install, when it tries to install CVSNT, the install asks all the usual questions, and hangs during the actual install.
I have traced the install using ProcMon, and the installer starts up, creates a temporary file in my temp directory (which is on drive E:), and then executes it.
I can't see any particular reason why the install hangs - there is no obvious loop. Both the original installer, and the temporary file create 2 threads, and one thread exits. So I guess the other thread is waiting for something which never happens.
Any idea how to proceed from here?
The issue is that the installer doesn't like the default installation path of c:\Program files (x86)\cvsnt — if you use c:\cvsnt the installer will proceed.
Update: this appears correct. If you still would like it in the default location under C:\Program Files (x86)..., use the 8.3 name (you can find it with dir /x), usually C:\PROGRA~2. As you can see in the screenshot, the last step appears correctly now. With a path with a space in it, it would hang forever.
Second part of wincvs --> cvsnt.exe get hangs with windows 7 due to incompatible, So you may try tortoiseCVS. It has the portable version and also working fine
SOLUTION FOR Windows 8 64-bit:
On Windows 8 64-bit I was unable to install CVSNT (even to c:\cvsnt), but I solved the problem by simple copy the whole CVTNT directory from my old pc.
I copied to C:\Program Files (x86)\cvsnt (exact location where wincvs expected to find cvsnt).
We had a similar problem on a machine at work (the difference being it was Windows 7 64-bit in our case). Even though the user had admin privileges, we were only able to resolve the issue by logging on directly as the admin before installing cvsnt.
Do not install the version of CVSNT that comes with WinCVS. It's an old, outdated, buggy version. Install a later release (at least 2.5.0.4).