Attempting to confirm that of all the schema in the head of a page exactly 3 of them should have a specific string within them. These schemas have no tags or sub classes to differentiate themselves from each other, only the text within them. I can confirm that the text exists within any of the schema:
cy.get('head > script[type="application/ld+json"]').should('contain', '"#type":"Product"')
But what I need is to confirm that that string exists 3 times, something like this:
cy.get('head > script[type="application/ld+json"]').contains('"#type":"Product"').should('have.length', 3)
And I can't seem to find a way to get this to work since .filter, .find, .contains, etc don't filter down the way I need them to. Any suggestions? At this point it seems like I either need to import a custom library or get someone to add ids to these specific schema. Thanks!
The first thing to note is that .contains() always yields a single result, even when many element match.
It's not very explicit in the docs, but this is what it says
Yields
.contains() yields the new DOM element it found.
If you run
cy.get('head > script[type="application/ld+json"]')
.contains('"#type":"Product"')
.then(console.log) // logs an object with length: 1
and open up the object logged in devtools you'll see length: 1, but if you remove the .contains('"#type":"Product"') the log will show a higher length.
You can avoid this by using the jQuery :contains() selector
cy.get('script[type="application/ld+json"]:contains("#type\": \"Product")')
.then(console.log) // logs an object with length: 3
.should('have.length', 3);
Note the inner parts of the search string have escape chars (\) for quote marks that are part of the search string.
If you want to avoid escape chars, use a bit of javascript inside a .then() to filter
cy.get('script[type="application/ld+json"]')
.then($els => $els.filter((index, el) => el.innerText.includes('"#type": "Product"')) )
.then(console.log) // logs an object with length: 3
.should('have.length', 3);
Related
How do I write this test in Cypress?
enter image description here
I have to confirm that either the headline or paragraph should contain the same keyword.
It's better to have JQuery elements in hand before the assertion so that you can use JQuery methods on them. cy.get() acts just like $(...) in JQuery, it will be enough to have the elements. (more here)
Once u have the elements, i.e. $el1 and $el2 below, then you can get their text via .text() method (more here) and then you can write your assertion.
Instead of a separate assertion, below I used a single one and checked if either of them includes the desired text by using || operator.
cy.get('first-el').then($el1 => {
cy.get('second-el').then($el2 => {
const inEl1 = $el1.text().includes('FIFA');
const inEl2 = $el2.text().includes('FIFA');
expect(inEl1 || inEl2).to.be.true;
});
});
I want to return the value of "Yield:" from a series of stocks from a URL dividenhistory.org, for example HDIF into a Google sheet using IMPORTXML, where F7 represents the user supplied ticker.
=IMPORTXML("https://dividendhistory.org/payout/TSX/"&F7, "/html/body/div/div[2]/div[2]/p[4]")
The problem with the above is the yield value is not always located in the same paragraph, depending on the ticker. It also returns with the word "Yield:" as part of the value.
I believe I should be using the XPATH parameter which should find and return the yield value only, but I am lost. I am open to all suggestions!
I tried with a few of the tickers there, and this should work. For example:
=IMPORTXML("https://dividendhistory.org/payout/ctas/", "//p[contains(.,'Yield')]/text()")
Output:
Yield: 1.05%
Obviously, you can change 'ctas' for any user input.
Try this and see if it works on all tickers.
EDIT:
To get only the number 1.05, you need to split the result and output the 2nd part:
=index(split(IMPORTXML("https://dividendhistory.org/payout/ctas/", "//p[contains(.,'Yield')]/text()"), ": "),2)
Output:
0.0105
I've seen the JSON array questions here and I'm still a little lost, so could use some extra help.
Here's the setup:
My Flow calls a sproc on my DB and that sproc returns this JSON:
{
"ResultSets": {
"Table1": [
{
"OrderID": 9518338,
"BasketID": 9518338,
"RefID": 65178176,
"SiteConfigID": 237
}
]
},
"OutputParameters": {}
}
Then I use a PARSE JSON action to get what looks like the same result, but now I'm told it's parsed and I can call variables.
Issue is when I try to call just, say, SiteConfigID, I get "The output you selected is inside a collection and needs to be looped over to be accessed. This action cannot be inside a foreach."
After some research, I know what's going on here. Table1 is an Array, and I need to tell PowerAutomate to just grab the first record of that array so it knows it's working with just a record instead of a full array. Fair enough. So I spin up a "Return Values to Virtual Power Agents" action just to see my output. I know I'm supposed to use a 'first' expression or a 'get [0] from array expression here, but I can't seem to make them work. Below are what I've tried and the errors I get:
Tried:
first(body('Parse-Sproc')?['Table1/SiteConfigID'])
Got: InvalidTemplate. Unable to process template language expressions in action 'Return_value(s)_to_Power_Virtual_Agents' inputs at line '0' and column '0': 'The template language function 'first' expects its parameter be an array or a string. The provided value is of type 'Null'. Please see https://aka.ms/logicexpressions#first for usage details.'.
Also Tried:
body('Parse-Sproc')?['Table1/SiteconfigID']
which just returns a null valued variable
Finally I tried
outputs('Parse-Sproc')?['Table1']?['value'][0]?['SiteConfigID']
Which STILL gives me a null-valued variable. It's the worst.
In that last expression, I also switched the variable type in the return to pva action to a string instead of a number, no dice.
Also, changed 'outputs' in that expression for 'body' .. also no dice
Here is a screenie of the setup:
To be clear: the end result i'm looking for is for the system to just return "SiteConfigID" as a string or an int so that I can pipe that into a virtual agent.
I believe this is what you need as an expression ...
body('Parse-Sproc')?['ResultSets']['Table1'][0]?['SiteConfigID']
You can see I'm just traversing down to the object and through the array to get the value.
Naturally, I don't have your exact flow but if I use your JSON and load it up into Parse JSON step to get the schema, I am able to get the result. I do get a different schema to you though so will be interesting to see if it directly translates.
I have a table with columns and below, an icon upon clicking, I can modify the table columns.
Now I want to count the columns before and after. I have a solution which works, where I call the the following before and after and then use the wrapped alias (via parseInt) to compare:
cy.get('body').then(($el) => {
// eslint-disable-next-line #typescript-eslint/no-unsafe-assignment
const countColsNr = $el.find('th[e2e-tag-header]').length;
cy.wrap(**to be named**).as(`${s}`);
});
This counts the actual columns and saves it in the variable to be named.
However, if I use a JQuery approach, it always gets the same column number, which is at the beginning of the test:
const beforetColsNr = Cypress.$('th[e2e-tag-header]').length;
log(beforetColsNr.toString());
... column handling code
... also tried with wait inbetween steps for debug
const afterColsNr = Cypress.$('th[e2e-tag-header]').length;
log(afterColsNr.toString());
Before number and after, are the same! When I look at the state of the browser (screenshot), I can see different columns amount at time of counting in after. This JQ-approach does not count properly the second time or uses the first value.
Is this something which is expected? Or is something I have to investigate?
cypress is asyncrhonous, so beforetColsNr and aftterColsNr are initialized at the same moment.
In the "cypress" mode in your first code block it works because of the usage of the .then().
I am trying to click an element that changes per each order like so
edit_div_123
edit_div_124
edit_div_xxx
xxx = any three numbers
I have tried using regex like so:
#driver.find_element(:css, "#edit_order_#{\d*} > div.submit > button[name=\"commit\"]").click
#driver.find_element(:xpath, "//*[(#id = "edit_order_#{\d*}")]//button").click
Is this possible? Any other ways of doing this?
You cannot use Regexp, like the other answers have indicated.
Instead, you can use a nifty CSS Selector trick:
#driver.find_element(:css, "[id^=\"edit_order_\"] > div.submit > button[name=\"commit\"]").click
Using:
^= indicates to find the element with the value beginning with your criteria.
*= says the criteria should be found anywhere within the element's value
$= indicates to find the element with with your criteria at the end of the value.
~= allows you to find the element based on a single criteria when the actual value has multiple space-seperated list of values.
Take a look at http://net.tutsplus.com/tutorials/html-css-techniques/the-30-css-selectors-you-must-memorize/ for some more info on other neat CSS tricks you should add to your utility belt!
You have no provided any html fragment that you are working on. Hence my answer is just based on the limited inputs provided your question.
I don't think WebDriver APIs support regex for locating elements. However, you can achieve what you want using just plain XPath as follows:
//*[starts-with(#id, 'edit_div_')]//button
Explanation: Above xpath will try to search all <button> nodes present under all elements whose id attribute starts with string edit_div_
In short, you can use starts-with() xpath function in order to match element with id format as edit_div_ followed by any number of characters
No, you can not.
But you should do something like this:
function hasClass(element, className) {
var re = new RegExp('(?:^|\\s+)' + className + '(?:\\s+|$)');
return re.test(element.className);
}
This worked for me
#driver.find_element(:xpath, "//a[contains(#href, 'person')]").click