Cut everything from specific char (or after) + Bash - bash

I have files which all look like this:
filename.bla_1
of cours I cannot know if the filename has "_" in it. could be file_name.bla_1.
I want to write a function that take filename and delete the _# at the end.
filename.bla_1 will be --> filename.bla
echo $filename | rev | cut -d "_" -f2 | rev
will do the trick if the file doesn't have "" in the name but I want to make sure this works also for filenames with ""


You can use parameter expansion. The % removes the shortest possible pattern on the right side of the value, ## removes the longest possible match on the left:
#! /bin/bash
for f in filename.bla_1 \
file_name_with_underscores.foo_2 \
file_name_with_underscores.foo \
filename.with_dots.foo_2 ; do
ext=${f##*.}
basename=${f%.*}
echo "$basename.${ext%_*}"
done


If you care to tweak the globbing parser a little,
shopt -s extglob
for f in abc.bla a_b_c_.bla abc.bla_1 a_b_c_.bla_2 123.456.789 123.456.789_x abc_
do echo ${f%_+([^._])}
done
abc.bla
a_b_c_.bla
abc.bla
a_b_c_.bla
123.456.789
123.456.789
abc_
${f%_+([^._])} means the value of $f with a _ followed immediately by one or more non-dot-or-underscore characters trimmed OFF the end.


Use #choroba's answer.
But to fix your code, after you reverse the filename, you need to take the 2nd and all following fields, not just the 2nd:
$ filename=foo_bar_baz.bla_1
$ rev <<<"$filename" | cut -d_ -f2- | rev
foo_bar_baz.bla
The -f2- with the trailing hyphen is the magic here. Read the cut man page.

Related

Double quotes containing variable not working in sed [duplicate]

In my bash script I have an external (received from user) string, which I should use in sed pattern.
REPLACE="<funny characters here>"
sed "s/KEYWORD/$REPLACE/g"
How can I escape the $REPLACE string so it would be safely accepted by sed as a literal replacement?
NOTE: The KEYWORD is a dumb substring with no matches etc. It is not supplied by user.

Warning: This does not consider newlines. For a more in-depth answer, see this SO-question instead. (Thanks, Ed Morton & Niklas Peter)
Note that escaping everything is a bad idea. Sed needs many characters to be escaped to get their special meaning. For example, if you escape a digit in the replacement string, it will turn in to a backreference.
As Ben Blank said, there are only three characters that need to be escaped in the replacement string (escapes themselves, forward slash for end of statement and & for replace all):
ESCAPED_REPLACE=$(printf '%s\n' "$REPLACE" | sed -e 's/[\/&]/\\&/g')
# Now you can use ESCAPED_REPLACE in the original sed statement
sed "s/KEYWORD/$ESCAPED_REPLACE/g"
If you ever need to escape the KEYWORD string, the following is the one you need:
sed -e 's/[]\/$*.^[]/\\&/g'
And can be used by:
KEYWORD="The Keyword You Need";
ESCAPED_KEYWORD=$(printf '%s\n' "$KEYWORD" | sed -e 's/[]\/$*.^[]/\\&/g');
# Now you can use it inside the original sed statement to replace text
sed "s/$ESCAPED_KEYWORD/$ESCAPED_REPLACE/g"
Remember, if you use a character other than / as delimiter, you need replace the slash in the expressions above wih the character you are using. See PeterJCLaw's comment for explanation.
Edited: Due to some corner cases previously not accounted for, the commands above have changed several times. Check the edit history for details.

The sed command allows you to use other characters instead of / as separator:
sed 's#"http://www\.fubar\.com"#URL_FUBAR#g'
The double quotes are not a problem.

The only three literal characters which are treated specially in the replace clause are / (to close the clause), \ (to escape characters, backreference, &c.), and & (to include the match in the replacement). Therefore, all you need to do is escape those three characters:
sed "s/KEYWORD/$(echo $REPLACE | sed -e 's/\\/\\\\/g; s/\//\\\//g; s/&/\\\&/g')/g"
Example:
$ export REPLACE="'\"|\\/><&!"
$ echo fooKEYWORDbar | sed "s/KEYWORD/$(echo $REPLACE | sed -e 's/\\/\\\\/g; s/\//\\\//g; s/&/\\\&/g')/g"
foo'"|\/><&!bar

Based on Pianosaurus's regular expressions, I made a bash function that escapes both keyword and replacement.
function sedeasy {
sed -i "s/$(echo $1 | sed -e 's/\([[\/.*]\|\]\)/\\&/g')/$(echo $2 | sed -e 's/[\/&]/\\&/g')/g" $3
}
Here's how you use it:
sedeasy "include /etc/nginx/conf.d/*" "include /apps/*/conf/nginx.conf" /etc/nginx/nginx.conf

It's a bit late to respond... but there IS a much simpler way to do this. Just change the delimiter (i.e., the character that separates fields). So, instead of s/foo/bar/ you write s|bar|foo.
And, here's the easy way to do this:
sed 's|/\*!50017 DEFINER=`snafu`#`localhost`\*/||g'
The resulting output is devoid of that nasty DEFINER clause.

It turns out you're asking the wrong question. I also asked the wrong question. The reason it's wrong is the beginning of the first sentence: "In my bash script...".
I had the same question & made the same mistake. If you're using bash, you don't need to use sed to do string replacements (and it's much cleaner to use the replace feature built into bash).
Instead of something like, for example:
function escape-all-funny-characters() { UNKNOWN_CODE_THAT_ANSWERS_THE_QUESTION_YOU_ASKED; }
INPUT='some long string with KEYWORD that need replacing KEYWORD.'
A="$(escape-all-funny-characters 'KEYWORD')"
B="$(escape-all-funny-characters '<funny characters here>')"
OUTPUT="$(sed "s/$A/$B/g" <<<"$INPUT")"
you can use bash features exclusively:
INPUT='some long string with KEYWORD that need replacing KEYWORD.'
A='KEYWORD'
B='<funny characters here>'
OUTPUT="${INPUT//"$A"/"$B"}"

Use awk - it is cleaner:
$ awk -v R='//addr:\\file' '{ sub("THIS", R, $0); print $0 }' <<< "http://file:\_THIS_/path/to/a/file\\is\\\a\\ nightmare"
http://file:\_//addr:\file_/path/to/a/file\\is\\\a\\ nightmare

Here is an example of an AWK I used a while ago. It is an AWK that prints new AWKS. AWK and SED being similar it may be a good template.
ls | awk '{ print "awk " "'"'"'" " {print $1,$2,$3} " "'"'"'" " " $1 ".old_ext > " $1 ".new_ext" }' > for_the_birds
It looks excessive, but somehow that combination of quotes works to keep the ' printed as literals. Then if I remember correctly the vaiables are just surrounded with quotes like this: "$1". Try it, let me know how it works with SED.

These are the escape codes that I've found:
* = \x2a
( = \x28
) = \x29
" = \x22
/ = \x2f
\ = \x5c
' = \x27
? = \x3f
% = \x25
^ = \x5e

sed is typically a mess, especially the difference between gnu-sed and bsd-sed
might just be easier to place some sort of sentinel at the sed side, then a quick pipe over to awk, which is far more flexible in accepting any ERE regex, escaped hex, or escaped octals.
e.g. OFS in awk is the true replacement ::
date | sed -E 's/[0-9]+/\xC1\xC0/g' |
mawk NF=NF FS='\xC1\xC0' OFS='\360\237\244\241'
1 Tue Aug 🤡 🤡:🤡:🤡 EDT 🤡
(tested and confirmed working on both BSD-sed and GNU-sed - the emoji isn't a typo that's what those 4 bytes map to in UTF-8 )

There are dozens of answers out there... If you don't mind using a bash function schema, below is a good answer. The objective below was to allow using sed with practically any parameter as a KEYWORD (F_PS_TARGET) or as a REPLACE (F_PS_REPLACE). We tested it in many scenarios and it seems to be pretty safe. The implementation below supports tabs, line breaks and sigle quotes for both KEYWORD and replace REPLACE.
NOTES: The idea here is to use sed to escape entries for another sed command.
CODE
F_REVERSE_STRING_R=""
f_reverse_string() {
: 'Do a string reverse.
To undo just use a reversed string as STRING_INPUT.
Args:
STRING_INPUT (str): String input.
Returns:
F_REVERSE_STRING_R (str): The modified string.
'
local STRING_INPUT=$1
F_REVERSE_STRING_R=$(echo "x${STRING_INPUT}x" | tac | rev)
F_REVERSE_STRING_R=${F_REVERSE_STRING_R%?}
F_REVERSE_STRING_R=${F_REVERSE_STRING_R#?}
}
# [Ref(s).: https://stackoverflow.com/a/2705678/3223785 ]
F_POWER_SED_ECP_R=""
f_power_sed_ecp() {
: 'Escape strings for the "sed" command.
Escaped characters will be processed as is (e.g. /n, /t ...).
Args:
F_PSE_VAL_TO_ECP (str): Value to be escaped.
F_PSE_ECP_TYPE (int): 0 - For the TARGET value; 1 - For the REPLACE value.
Returns:
F_POWER_SED_ECP_R (str): Escaped value.
'
local F_PSE_VAL_TO_ECP=$1
local F_PSE_ECP_TYPE=$2
# NOTE: Operational characters of "sed" will be escaped, as well as single quotes.
# By Questor
if [ ${F_PSE_ECP_TYPE} -eq 0 ] ; then
# NOTE: For the TARGET value. By Questor
F_POWER_SED_ECP_R=$(echo "x${F_PSE_VAL_TO_ECP}x" | sed 's/[]\/$*.^[]/\\&/g' | sed "s/'/\\\x27/g" | sed ':a;N;$!ba;s/\n/\\n/g')
else
# NOTE: For the REPLACE value. By Questor
F_POWER_SED_ECP_R=$(echo "x${F_PSE_VAL_TO_ECP}x" | sed 's/[\/&]/\\&/g' | sed "s/'/\\\x27/g" | sed ':a;N;$!ba;s/\n/\\n/g')
fi
F_POWER_SED_ECP_R=${F_POWER_SED_ECP_R%?}
F_POWER_SED_ECP_R=${F_POWER_SED_ECP_R#?}
}
# [Ref(s).: https://stackoverflow.com/a/24134488/3223785 ,
# https://stackoverflow.com/a/21740695/3223785 ,
# https://unix.stackexchange.com/a/655558/61742 ,
# https://stackoverflow.com/a/11461628/3223785 ,
# https://stackoverflow.com/a/45151986/3223785 ,
# https://linuxaria.com/pills/tac-and-rev-to-see-files-in-reverse-order ,
# https://unix.stackexchange.com/a/631355/61742 ]
F_POWER_SED_R=""
f_power_sed() {
: 'Facilitate the use of the "sed" command. Replaces in files and strings.
Args:
F_PS_TARGET (str): Value to be replaced by the value of F_PS_REPLACE.
F_PS_REPLACE (str): Value that will replace F_PS_TARGET.
F_PS_FILE (Optional[str]): File in which the replacement will be made.
F_PS_SOURCE (Optional[str]): String to be manipulated in case "F_PS_FILE" was
not informed.
F_PS_NTH_OCCUR (Optional[int]): [1~n] - Replace the nth match; [n~-1] - Replace
the last nth match; 0 - Replace every match; Default 1.
Returns:
F_POWER_SED_R (str): Return the result if "F_PS_FILE" is not informed.
'
local F_PS_TARGET=$1
local F_PS_REPLACE=$2
local F_PS_FILE=$3
local F_PS_SOURCE=$4
local F_PS_NTH_OCCUR=$5
if [ -z "$F_PS_NTH_OCCUR" ] ; then
F_PS_NTH_OCCUR=1
fi
local F_PS_REVERSE_MODE=0
if [ ${F_PS_NTH_OCCUR} -lt -1 ] ; then
F_PS_REVERSE_MODE=1
f_reverse_string "$F_PS_TARGET"
F_PS_TARGET="$F_REVERSE_STRING_R"
f_reverse_string "$F_PS_REPLACE"
F_PS_REPLACE="$F_REVERSE_STRING_R"
f_reverse_string "$F_PS_SOURCE"
F_PS_SOURCE="$F_REVERSE_STRING_R"
F_PS_NTH_OCCUR=$((-F_PS_NTH_OCCUR))
fi
f_power_sed_ecp "$F_PS_TARGET" 0
F_PS_TARGET=$F_POWER_SED_ECP_R
f_power_sed_ecp "$F_PS_REPLACE" 1
F_PS_REPLACE=$F_POWER_SED_ECP_R
local F_PS_SED_RPL=""
if [ ${F_PS_NTH_OCCUR} -eq -1 ] ; then
# NOTE: We kept this option because it performs better when we only need to replace
# the last occurrence. By Questor
# [Ref(s).: https://linuxhint.com/use-sed-replace-last-occurrence/ ,
# https://unix.stackexchange.com/a/713866/61742 ]
F_PS_SED_RPL="'s/\(.*\)$F_PS_TARGET/\1$F_PS_REPLACE/'"
elif [ ${F_PS_NTH_OCCUR} -gt 0 ] ; then
# [Ref(s).: https://unix.stackexchange.com/a/587924/61742 ]
F_PS_SED_RPL="'s/$F_PS_TARGET/$F_PS_REPLACE/$F_PS_NTH_OCCUR'"
elif [ ${F_PS_NTH_OCCUR} -eq 0 ] ; then
F_PS_SED_RPL="'s/$F_PS_TARGET/$F_PS_REPLACE/g'"
fi
# NOTE: As the "sed" commands below always process literal values for the "F_PS_TARGET"
# so we use the "-z" flag in case it has multiple lines. By Quaestor
# [Ref(s).: https://unix.stackexchange.com/a/525524/61742 ]
if [ -z "$F_PS_FILE" ] ; then
F_POWER_SED_R=$(echo "x${F_PS_SOURCE}x" | eval "sed -z $F_PS_SED_RPL")
F_POWER_SED_R=${F_POWER_SED_R%?}
F_POWER_SED_R=${F_POWER_SED_R#?}
if [ ${F_PS_REVERSE_MODE} -eq 1 ] ; then
f_reverse_string "$F_POWER_SED_R"
F_POWER_SED_R="$F_REVERSE_STRING_R"
fi
else
if [ ${F_PS_REVERSE_MODE} -eq 0 ] ; then
eval "sed -i -z $F_PS_SED_RPL \"$F_PS_FILE\""
else
tac "$F_PS_FILE" | rev | eval "sed -z $F_PS_SED_RPL" | tac | rev > "$F_PS_FILE"
fi
fi
}
MODEL
f_power_sed "F_PS_TARGET" "F_PS_REPLACE" "" "F_PS_SOURCE"
echo "$F_POWER_SED_R"
EXAMPLE
f_power_sed "{ gsub(/,[ ]+|$/,\"\0\"); print }' ./ and eliminate" "[ ]+|$/,\"\0\"" "" "Great answer (+1). If you change your awk to awk '{ gsub(/,[ ]+|$/,\"\0\"); print }' ./ and eliminate that concatenation of the final \", \" then you don't have to go through the gymnastics on eliminating the final record. So: readarray -td '' a < <(awk '{ gsub(/,[ ]+/,\"\0\"); print; }' <<<\"$string\") on Bash that supports readarray. Note your method is Bash 4.4+ I think because of the -d in readar"
echo "$F_POWER_SED_R"
IF YOU JUST WANT TO ESCAPE THE PARAMETERS TO THE SED COMMAND
MODEL
# "TARGET" value.
f_power_sed_ecp "F_PSE_VAL_TO_ECP" 0
echo "$F_POWER_SED_ECP_R"
# "REPLACE" value.
f_power_sed_ecp "F_PSE_VAL_TO_ECP" 1
echo "$F_POWER_SED_ECP_R"
IMPORTANT: If the strings for KEYWORD and/or replace REPLACE contain tabs or line breaks you will need to use the "-z" flag in your "sed" command. More details here.
EXAMPLE
f_power_sed_ecp "{ gsub(/,[ ]+|$/,\"\0\"); print }' ./ and eliminate" 0
echo "$F_POWER_SED_ECP_R"
f_power_sed_ecp "[ ]+|$/,\"\0\"" 1
echo "$F_POWER_SED_ECP_R"
NOTE: The f_power_sed_ecp and f_power_sed functions above was made available completely free as part of this project ez_i - Create shell script installers easily!.

Standard recommendation here: use perl :)
echo KEYWORD > /tmp/test
REPLACE="<funny characters here>"
perl -pi.bck -e "s/KEYWORD/${REPLACE}/g" /tmp/test
cat /tmp/test

don't forget all the pleasure that occur with the shell limitation around " and '
so (in ksh)
Var=">New version of \"content' here <"
printf "%s" "${Var}" | sed "s/[&\/\\\\*\\"']/\\&/g' | read -r EscVar
echo "Here is your \"text\" to change" | sed "s/text/${EscVar}/g"

If the case happens to be that you are generating a random password to pass to sed replace pattern, then you choose to be careful about which set of characters in the random string. If you choose a password made by encoding a value as base64, then there is is only character that is both possible in base64 and is also a special character in sed replace pattern. That character is "/", and is easily removed from the password you are generating:
# password 32 characters log, minus any copies of the "/" character.
pass=`openssl rand -base64 32 | sed -e 's/\///g'`;

If you are just looking to replace Variable value in sed command then just remove
Example:
sed -i 's/dev-/dev-$ENV/g' test to sed -i s/dev-/dev-$ENV/g test

I have an improvement over the sedeasy function, which WILL break with special characters like tab.
function sedeasy_improved {
sed -i "s/$(
echo "$1" | sed -e 's/\([[\/.*]\|\]\)/\\&/g'
| sed -e 's:\t:\\t:g'
)/$(
echo "$2" | sed -e 's/[\/&]/\\&/g'
| sed -e 's:\t:\\t:g'
)/g" "$3"
}
So, whats different? $1 and $2 wrapped in quotes to avoid shell expansions and preserve tabs or double spaces.
Additional piping | sed -e 's:\t:\\t:g' (I like : as token) which transforms a tab in \t.

An easier way to do this is simply building the string before hand and using it as a parameter for sed
rpstring="s/KEYWORD/$REPLACE/g"
sed -i $rpstring test.txt

Using sed to find a string with wildcards and then replacing with same wildcards

So I am trying to remove new lines using sed, because it the only way I can think of to do it. I'm completely self taught so there may be a more efficient way that I just don't know.
The string I am searching for is \HF=-[0-9](newline character). The problem is the data it is searching through can look like (Note: there are actual new line characters in this data, which I think is causing a bit of the problem)
1\1\GINC-N076\SP\RMP2-FC\CC-pVDZ\C12H12\R2536\09-Apr-2020\0\\# mp2/cc-
pVDZ\\Squish3_Slide0\\0,1\H,0,0.,2.4822,0.\C,0,0.,1.3948,0.\C,0,0.,-1.
3948,0.\C,0,1.2079,0.6974,0.\C,0,-1.2079,0.6974,0.\C,0,-1.2079,-0.6974
,0.\C,0,1.2079,-0.6974,0.\H,0,2.1497,1.2411,0.\H,0,-2.1497,1.2411,0.\H
,0,-2.1497,-1.2411,0.\H,0,2.1497,-1.2411,0.\H,0,0.,-2.4822,0.\C,0,0.,1
.3948,3.\C,0,0.,-1.3948,3.\C,0,1.2079,0.6974,3.\C,0,-1.2079,0.6974,3.\
C,0,-1.2079,-0.6974,3.\C,0,1.2079,-0.6974,3.\H,0,0.,2.4822,3.\H,0,2.14
97,1.2411,3.\H,0,-2.1497,1.2411,3.\H,0,-2.1497,-1.2411,3.\H,0,2.1497,-
1.2411,3.\H,0,0.,-2.4822,3.\\Version=ES64L-G09RevD.01\State=1-AG\HF=-4
61.3998608\MP2=-463.0005321\RMSD=3.490e-09\PG=D02H [SG"(C4H4),X(C8H8)]
\\#
OR
1\1\GINC-N076\SP\RMP2-FC\CC-pVDZ\C12H12\R2536\09-Apr-2020\0\\# mp2/cc-
pVDZ\\Squish3.1_Slide0\\0,1\H,0,0.,2.4822,0.\C,0,0.,1.3948,0.\C,0,0.,-
1.3948,0.\C,0,1.2079,0.6974,0.\C,0,-1.2079,0.6974,0.\C,0,-1.2079,-0.69
74,0.\C,0,1.2079,-0.6974,0.\H,0,2.1497,1.2411,0.\H,0,-2.1497,1.2411,0.
\H,0,-2.1497,-1.2411,0.\H,0,2.1497,-1.2411,0.\H,0,0.,-2.4822,0.\C,0,0.
,1.3948,3.1\C,0,0.,-1.3948,3.1\C,0,1.2079,0.6974,3.1\C,0,-1.2079,0.697
4,3.1\C,0,-1.2079,-0.6974,3.1\C,0,1.2079,-0.6974,3.1\H,0,0.,2.4822,3.1
\H,0,2.1497,1.2411,3.1\H,0,-2.1497,1.2411,3.1\H,0,-2.1497,-1.2411,3.1\
H,0,2.1497,-1.2411,3.1\H,0,0.,-2.4822,3.1\\Version=ES64L-G09RevD.01\St
ate=1-AG\HF=-461.4104442\MP2=-463.0062587\RMSD=3.651e-09\PG=D02H [SG"(
C4H4),X(C8H8)]\\#
OR
1\1\GINC-N076\SP\RMP2-FC\CC-pVDZ\C12H12\R2536\09-Apr-2020\0\\# mp2/cc-
pVDZ\\Squish3.3_Slide1.7\\0,1\H,0,0.,2.4822,0.\C,0,0.,1.3948,0.\C,0,0.
,-1.3948,0.\C,0,1.2079,0.6974,0.\C,0,-1.2079,0.6974,0.\C,0,-1.2079,-0.
6974,0.\C,0,1.2079,-0.6974,0.\H,0,2.1497,1.2411,0.\H,0,-2.1497,1.2411,
0.\H,0,-2.1497,-1.2411,0.\H,0,2.1497,-1.2411,0.\H,0,0.,-2.4822,0.\C,0,
0.,-0.3052,3.3\C,0,0.,-3.0948,3.3\C,0,1.2079,-1.0026,3.3\C,0,-1.2079,-
1.0026,3.3\C,0,-1.2079,-2.3974,3.3\C,0,1.2079,-2.3974,3.3\H,0,0.,0.782
2,3.3\H,0,2.1497,-0.4589,3.3\H,0,-2.1497,-0.4589,3.3\H,0,-2.1497,-2.94
11,3.3\H,0,2.1497,-2.9411,3.3\H,0,0.,-4.1822,3.3\\Version=ES64L-G09Rev
D.01\State=1-AG\HF=-461.436061\MP2=-463.0177441\RMSD=7.859e-09\PG=C02H
[SGH(C4H4),X(C8H8)]\\#
OR
1\1\GINC-N076\SP\RMP2-FC\CC-pVDZ\C12H12\R2536\09-Apr-2020\0\\# mp2/cc-
pVDZ\\Squish3.6_Slide0.9\\0,1\H,0,0.,2.4822,0.\C,0,0.,1.3948,0.\C,0,0.
,-1.3948,0.\C,0,1.2079,0.6974,0.\C,0,-1.2079,0.6974,0.\C,0,-1.2079,-0.
6974,0.\C,0,1.2079,-0.6974,0.\H,0,2.1497,1.2411,0.\H,0,-2.1497,1.2411,
0.\H,0,-2.1497,-1.2411,0.\H,0,2.1497,-1.2411,0.\H,0,0.,-2.4822,0.\C,0,
0.,0.4948,3.6\C,0,0.,-2.2948,3.6\C,0,1.2079,-0.2026,3.6\C,0,-1.2079,-0
.2026,3.6\C,0,-1.2079,-1.5974,3.6\C,0,1.2079,-1.5974,3.6\H,0,0.,1.5822
,3.6\H,0,2.1497,0.3411,3.6\H,0,-2.1497,0.3411,3.6\H,0,-2.1497,-2.1411,
3.6\H,0,2.1497,-2.1411,3.6\H,0,0.,-3.3822,3.6\\Version=ES64L-G09RevD.0
1\State=1-AG\HF=-461.4376969\MP2=-463.0163868\RMSD=7.263e-09\PG=C02H [
SGH(C4H4),X(C8H8)]\\#
Basically the number I am looking for can be broken up into two lines at any point based on character count. I need to get rid of the newline breaking up the number so that I can extract the entire value into a separate file. (I have no problems with the extraction to a new file, hence why it isn't included in the code)
Currently I am using this code
sed -i ':a;N;$!ba;s/HF=-*[0-9]*\n/HF=-*[0-9]*/g' $i &&
Which ALMOST works, expect it doesn't replace the wildcard values with the same values. It replaces it with the actual text [0-9] instead and doesn't always remove the new line character.
Important to the is that THERE ARE ACTUAL NEW LINE CHARACTERS in the output file and there is no way to change that without messing up the other 30 lines I am extracting from this output file.
What I want is to just get rid of the newline characters that occur when that string is found, regardless of how many digits there are in between the - sign and the newline character.
So the expected output would be something like
1\1\GINC-N076\SP\RMP2-FC\CC-pVDZ\C12H12\R2536\09-Apr-2020\0\\# mp2/cc-
pVDZ\\Squish3_Slide0\\0,1\H,0,0.,2.4822,0.\C,0,0.,1.3948,0.\C,0,0.,-1.
3948,0.\C,0,1.2079,0.6974,0.\C,0,-1.2079,0.6974,0.\C,0,-1.2079,-0.6974
,0.\C,0,1.2079,-0.6974,0.\H,0,2.1497,1.2411,0.\H,0,-2.1497,1.2411,0.\H
,0,-2.1497,-1.2411,0.\H,0,2.1497,-1.2411,0.\H,0,0.,-2.4822,0.\C,0,0.,1
.3948,3.\C,0,0.,-1.3948,3.\C,0,1.2079,0.6974,3.\C,0,-1.2079,0.6974,3.\
C,0,-1.2079,-0.6974,3.\C,0,1.2079,-0.6974,3.\H,0,0.,2.4822,3.\H,0,2.14
97,1.2411,3.\H,0,-2.1497,1.2411,3.\H,0,-2.1497,-1.2411,3.\H,0,2.1497,-
1.2411,3.\H,0,0.,-2.4822,3.\\Version=ES64L-G09RevD.01\State=1-AG\HF=-461.3998608\MP2=-463.0005321\RMSD=3.490e-09\PG=D02H [SG"(C4H4),X(C8H8)]
\\#
These files are rather large and have over 1500 executions of this line of code, so the more efficient the better.
Everything else in the script this is in is using a combination of grep, awk, sed, and basic UNIX commands.
EDIT
After trying
sed -i -E ':a;N;$!ba;s/(\\HF=-?[.0-9]*)\n/\1/' $i &&
I still had no luck getting rid of those pesky new line characters.
If it has any effect on the answers at all here is the rest of the code to go with the one line that is causing problems
echo name HF MP2 mpdiff | cat > allE
for i in *.out
do echo name HF MP2 mpdiff | cat > $i.allE
grep "Slide" $i | cut -d "\\" -f2 | cat | tr -d '\n' > $i.name &&
grep "EUMP2" $i | cut -d "=" -f3 | cut -c 1-25 | tr '\n' ' ' | tr -s ' ' >> $i.mp &&
grep "EUMP2" $i | cut -d "=" -f2 | cut -c 1-25 | tr '\n' ' ' | tr -s ' ' >> $i.mpdiff &&
sed -i -E ':a;N;$!ba;s/(\\HF=-?[.0-9]*)\n/\1/' $i &&
grep '\\HF' $i | awk -F 'HF' '{print substr($2,2,14)}' | tr '\n' ' ' >> $i.hf &&
paste $i.name >> $i.energies &&
sed -i 's/ /0 /g' $i.hf &&
sed -i 's/\\/0/g' $i.hf &&
sed -i 's/[A-Z]/0/g' $i.hf &&
paste $i.hf >> $i.energies &&
sed -i 's/[ABCEFGHIJKLMNOPQRSTUVWXYZ]//g' $i.mp &&
paste $i.mp >> $i.energies &&
sed -i 's/[ABCEFGHIJKLMNOPQRSTUVWXYZ]//g' $i.mpdiff &&
paste $i.mpdiff >> $i.energies &&
transpose $i.energies >> $i.allE #temp.txt &&
#cat temp.txt > $i.energies
#echo $i is finished
done
echo see allE for energies
#rm *.energies #temp.txt
rm *.name
rm *.mp
rm *.hf
rm *.mpdiff

Here is how you can fix your current attempt.
sed -E ':a;N;$!ba;s/(\\HF=-?[.0-9]*)\n/\1/'
Add the i flag if you want to make the changes on the file itself, add && to send the job to the background, etc. The -E flag is needed, because backreferences (see below) are part of extended regular expressions.
I made the following changes: I changed -* to -? as there should be at most one dash (if I understand correctly and that is in fact a minus sign, not a dash). I added the period to the bracket expression, so that the decimal point would be matched too. (Note that in a bracket expression, the dot is a regular character). I wrapped the whole thing except the newline in parentheses - making it into a subexpression, which you can refer to with a backreference - which is what I did in the replacement part.
A few notes though - this will join the lines even if the entire number is at the end of one line, but not followed by the closing \. If in fact the entire number being on one line, but the closing \ is on the next line, you can change the sed command slightly, to leave those alone. On the other hand, this does not handle situations where, for example, one line ends in \H and the next line begins with F=304.222\ You only mentioned "split number" in your problem statement; shouldn't you, though, also handle such cases, where the newline splits the \HF=...\ token, just not in the "number" portion of the token?

It looks like your input lines start with a space. I have ignored them in this solution.
sed -rz 's/(AG\\HF=-[0-9]*)\n/\1/g' "$i"

Extract values from a property file using bash

I have a variable which contains key/values separated by space:
echo $PROPERTY
server_geo=BOS db.jdbc_url=jdbc\:mysql\://mysql-test.com\:3306/db02 db.name=db02 db.hostname=/mysql-test.com datasource.class.xa=com.mysql.jdbc.jdbc2.optional.MysqlXADataSource server_uid=BOS_mysql57 hibernate33.dialect=org.hibernate.dialect.MySQL5InnoDBDialect hibernate.connection.username=db02 server_labels=mysql57,mysql5,mysql db.jdbc_class=com.mysql.jdbc.Driver db.schema=db02 hibernate.connection.driver_class=com.mysql.jdbc.Driver uuid=a19ua19 db.primary_label=mysql57 db.port=3306 server_label_primary=mysql57 hibernate.dialect=org.hibernate.dialect.MySQL5InnoDBDialect
I'd need to extract the values of the single keys, for example db.jdbc_url.
Using one code snippet I've found:
echo $PROPERTY | sed -e 's/ db.jdbc_url=\(\S*\).*/\1/g'
but that returns also other properties found before my key.
Any help how to fix it ?
Thanks

If db.name always follow db.jdbc_url, then use grep lookaround,
$ echo "${PROPERTY}" | grep -oP '(?<=db.jdbc_url=).*(?=db.name)'
jdbc\:mysql\://mysql-test.com\:3306/db02
or add the VAR to an array,
$ myarr=($(echo $PROPERTY))
$ echo "${myarr[1]}" | grep -oP '(?<=db.jdbc_url=).*(?=$)'
jdbc\:mysql\://mysql-test.com\:3306/db02

This is caused because you are using the substitute command (sed s/.../.../), so any text before your regex is kept as is. Using .* before db\.jdbc_url along with the begin (^) / end ($) of string marks makes you match the whole content of the variable.
In order to be totaly safe, your regex should be :
sed -e 's/^.*db\.jdbc_url=\(\S*\).*$/\1/g'

You can use grep for this, like so:
echo $PROPERTY | grep -oE "db.jdbc_url=\S+" | cut -d'=' -f2
The regex is very close to the one you used with sed.
The -o option is used to print the matched parts of the matching line.
Edit: if you want only the value, cut on the '='
Edit 2: egrep say it is deprecated, so use grep -oE instead, same result. Just to cover all bases :-)

How to display 0-nth character in a file name

I have a file = 'test_acn_mark_down_201400000.csv'.
I wanted to have a value only file1='test_acn_mark_down' in unix
which means from position 0 to f4 and the delimiter will be '-'.
Please help me .

You can use cut:
file='test_acn_mark_down_201400000.csv'
echo "$file" | cut -d _ -f1-4
file1=$(echo "echi $file" | cut -d _ -f1-4)
echo "$file1"
test_acn_mark_down

You asked for the first four fields.
The best way will be using cut:
file=test_acn_mark_down_201400000.csv
file1=$(echo "${file}" | cut -d _ -f1-4)
When you know that the remaining part of the filename is without '_' characters, you can also use a special syntax removing everything on the end starting with the last underscore:
file=test_acn_mark_down_201400000.csv
file1="${file%_*}"

Print word between two characters by going backward in the line

I having problems in extracting the word from a line. What i want is that it picks the first word before the symbol # but after the /. Which is the only delimiter that stand out.
A line looks like this:
,["https://picasaweb.google.com/111560558537332305125/Programming#5743548966953176786",1,["https://lh6.googleusercontent.com/-Is8rb8G1sb8/T7UvWtVOTtI/AAAAAAAAG68/Cht3FzfHXNc/s0-d/Geek.jpg",1920,1200]
I want the word Programming.
To get that line i am using this which narrows it down.
sed -n '/.*picasa.*.jpg/p' 5743548866439293105
So i want it to pretty much find # and then go backward until it hit the first /. Then print it out. In this case the word should be Programming but could be anything.
I want it to be as short as possible and have experimented with
sed -n '/.*picasa.*.jpg/p' 5743548866439293105 | awk '$0=$2' FS="/" RS="[$#]"

You can do that with sed (slightly shortened for formatting but works on your original string as well):
pax> echo ',["https://p.g.com/111/Prog#574' | sed 's/^[^#]*\/\([^#]*\)#.*$/\1/'
Prog
pax>
Explaining in more detail:
/---+------------------> greedy capture up to '/'.
/ |
| | /------+---------> capture the stuff between '/' and '#'.
| |/ |
| || | /-+-----> everything from '#' to end of line.
| || |/ |
| || || |
's/^[^#]*\/\([^#]*\)#.*$/\1/'
||
\+---> replace with captured group.
It basically searches for an entire line that has the pattern you want (first # following a /), whilst capturing (with the \( and \) brackets) just the stuff between / and #.
The substitution then replaces the entire line with just that captured text you're interested in (via \1).

Using grep with some Perl regex extensions:
echo $string | grep -P -o "(?<=/)[^/]+(?=#)"
-P tells grep to use Perl extensions. -o tells grep to display only the matched text. To understand what gets matched, break the regex into three parts: (?<=/), [^/]+?, and (?=#). The first part says that the matched text must follow a '/', without including the '/' in the match. The second parts matches a string of non-'/' characters. The last part says that the matched text must be immediately followed by a '#', without including the '#' in the match.
Another grep, using the "\K" feature to "throw away" the match up to the last '/' before the '#':
# Match as much as possible up to a '/', but throw it away, then match as much as you can
# up to the first #
echo $string | grep -oP ".*/\K.+(?=#)"
Using cut and awk to get the first field (splitting on #) followed by the last field (splitting on /):
echo $string | cut -d# -f1 | awk -F/ '{print $NF}'
Using some temporary variables and bash's parameter expansion facilities:
$ FOO=["https://picasaweb.google.com/111560558537332305125/Programming#5743548966953176786",1,["https://lh6.googleusercontent.com/-Is8rb8G1sb8/T7UvWtVOTtI/AAAAAAAAG68/Cht3FzfHXNc/s0-d/Geek.jpg",1920,1200]
$ BAR=${FOO%#*} # Strip the last # and everything after
$ echo $BAR
[https://picasaweb.google.com/111560558537332305125/Programming
$ BAZ=${BAR##*/} # Strip everything up to and including the last /
$ echo $BAZ
Programming

This might work for you:
sed '/.*\/\([^#]*\)#.*/{s//\1/;q};d' file

Resources