I don't have any idea about this, I have also tried to change its version to 11 but it doesn't works
[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 14.098 s
[INFO] Finished at: 2021-08-31T17:21:13Z
[INFO] ------------------------------------------------------------------------
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-compiler-plugin:3.8.1:compile (default-compile) on project chatroom: Fatal error compiling: invalid target release: 16 -> [Help 1]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoExecutionException
! ERROR: Failed to build app with Maven
We're sorry this build is failing! If you can't find the issue in application code,
please submit a ticket so we can help: https://help.heroku.com/
! Push rejected, failed to compile Java app.
! Push failed
Thanks in advance
make sure the installed version of jdk is 16 (or above) and check your project in your development environment if its configured for this version too.
invalid target release: 16
Related
I was creating a custom processor in apache NIFI and in order to do it, I needed to run the cmd: mvn clean install but I have an error
[INFO] ------------------------------------------------------------------------
[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 01:59 min
[INFO] Finished at: 2020-02-21T11:50:51+01:00
[INFO] ------------------------------------------------------------------------
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-compiler-plugin:3.
8.1:testCompile (groovy-tests) on project nifi-pros-test: Execution groovy-tests
of goal org.apache.maven.plugins:maven-compiler-plugin:3.8.1:testCompile failed
: Plugin org.apache.maven.plugins:maven-compiler-plugin:3.8.1 or one of its depe
ndencies could not be resolved: Could not transfer artifact org.codehaus.groovy:
groovy-eclipse-batch:jar:2.5.4-01 from/to bintray (https://dl.bintray.com/groovy
/maven): Transfer failed for https://dl.bintray.com/groovy/maven/org/codehaus/gr
oovy/groovy-eclipse-batch/2.5.4-01/groovy-eclipse-batch-2.5.4-01.jar: Connect to
d29vzk4ow07wi7.cloudfront.net:443 [d29vzk4ow07wi7.cloudfront.net/13.225.218.65,
d29vzk4ow07wi7.cloudfront.net/13.225.218.163, d29vzk4ow07wi7.cloudfront.net/13.
225.218.41, d29vzk4ow07wi7.cloudfront.net/13.225.218.66] failed: Read timed out
-> [Help 1]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e swit
ch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please rea
d the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/PluginResoluti
onException
any help?? I'm a beginner and I googled it but no solution
Actually all it takes that instead of passing the command: mvn install enter the command: mvn install -DskipTests ! that's all it take !! because those errors are generated by testing ! so skip the test and all worked super greatly
I am working on neo4j-spark connector. After cloning and moving to the directory, I did mvn clean install assembly:single. It throws error :
Tests in error:
runMatrixQueryDFSchema(org.neo4j.spark.Neo4jDataFrameTest): Job aborted due to stage failure: Task 0 in stage 3.0 failed 1 times, most recent failure: Lost task 0.0 in stage 3.0 (TID 12, localhost): java.util.NoSuchElementException: None.get
Tests run: 7, Failures: 0, Errors: 1, Skipped: 1
[INFO] ------------------------------------------------------------------------
[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 42.538s
[INFO] Finished at: Wed Aug 24 19:18:07 IST 2016
[INFO] Final Memory: 72M/1016M
[INFO] ------------------------------------------------------------------------
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-surefire-plugin:2.10:test (default-test) on project neo4j-spark-connector: There are test failures.
[ERROR]
[ERROR] Please refer to /data/neo4j-spark-connector/target/surefire-reports for the individual test results.
[ERROR] -> [Help 1]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoFailureException
How do I get rid of it? Do I need to do anything else to build target/neo4j-spark-connector_2.11-full-2.0.0-M1.jar for Scala 2.11. I have installed Spark 2.0.0 installed. I have it saved in the directory same as that for neo4j-spark-connector. Do I need to save it somewhere else? How do I get it to work?
This issue has been resolved now. You can take latest pull from the neo4j-spark-connector repository and get it to work.
Thanks.
I'm trying to install Sakai 10.2 and it gives me an error every time. I've reinstall everything, including de OS. And the error persist.
This is my current configuration:
Sakai 10.2
Maven 3.2.5
Tomcat 7.0.59
This the error:
[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------ ------
[INFO] Total time: 02:00 min
[INFO] Finished at: 2015-03-17T17:56:31+01:00
[INFO] Final Memory: 347M/829M
[INFO] ------------------------------------------------------------------------
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-surefire-plugin:2.16:test (default-test) on project entitybroker-restimpl: There are test failures.
[ERROR]
[ERROR] Please refer to C:\opt\sakai-10.x\entitybroker\rest\target\surefire-reports for the individual test results.
[ERROR] -> [Help 1]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoFailureException
[ERROR]
[ERROR] After correcting the problems, you can resume the build with the command
[ERROR] mvn <goals> -rf :entitybroker-restimpl
These are de reports of the test.
EntityDescriptionManagerTest
EntityHandlerImplTest
[EntityBrokerServlet]http://pastebin.com/vWmbNXxa
There appears to be an error in the tests.
Build Sakai with -Dmaven.test.skip.
Could you also file a Jira at http://jira.sakaiproject.org with the test errors and someone can take a look.
Ok. Problem solved. I don't know how and I don't know the cause of the problem.
I've update JDK to _076 version and skip the test. It have no sense for me.
But it's done.
Thank you for your time and your help.
I have a Spring MVC project that I am currently working on. Everything looks fine and I am not missing any of the jar files. On "mvn clean install" I am getting the error below.
So far I've tried all the other suggestion that I found on similar topics like: "mvn dependency::tree" so I can check if I am missing any repository but no result.
For some guys it looks like "mvn clean install -U" was the solution but not in my case, getting the same error.
[INFO] ------------------------------------------------------------------------
[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 01:17 min
[INFO] Finished at: 2014-12-09T11:46:34+00:00
[INFO] Final Memory: 23M/226M
[INFO] ------------------------------------------------------------------------
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-surefire-plugin:2.
12.4:test (default-test) on project am: There are test failures.
[ERROR]
[ERROR] Please refer to C:\Users\ADMIN\Documents\Code Base\Removable Disk\am
\target\surefire-reports for the individual test results.
[ERROR] -> [Help 1]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e swit
ch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please rea
d the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoFailureExc
eption
C:\Users\ADMIN\Documents\Code Base\Removable Disk\am>
One or more test(s) are failing. You have two options
Fix those test cases and try.
or
Run mvn clean install -Dmaven.test.skip. This command will skips the test phase.
So I'm following the tutorials online to build a cloud connector but I can't even get the skeleton to be generated!
tutorial 1
tutorial 2
I get the following error, using the create-cloud-connector.bat script given by the Mule Cloud Connect Development Kit
> [INFO] ------------------------------------------------------------------------
[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 1.170s
[INFO] Finished at: Mon Jul 30 13:00:57 EDT 2012
[INFO] Final Memory: 7M/122M
[INFO] ------------------------------------------------------------------------
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-archetype-plugin:2.2:generate (default-cli) on project standalone-pom: The desired archetype does not exist (org.mule.tools:mule-cloud-connector-archetype:2.0.16) -> [Help 1]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoFailureException
what are some things I could be doing wrong?
I updated the Maven settings.xml file
the first question is " Name of the cloud service the new connector uses
[default: ] " can I enter anything there? (or does it have to be like an existing service? what if I'm building one that doesn't exist?)
It looks like the tutorial is pointing at rather old version of the archetype (2.0.16) that maven can't even find.
I recommend to replace the generation step with the following command
mvn archetype:generate -DarchetypeGroupId=org.mule.tools.devkit -DarchetypeArtifactId=mule-devkit-archetype-cloud-connector -DarchetypeVersion=3.3.0
You can find additional informations here