I have a Spring MVC project that I am currently working on. Everything looks fine and I am not missing any of the jar files. On "mvn clean install" I am getting the error below.
So far I've tried all the other suggestion that I found on similar topics like: "mvn dependency::tree" so I can check if I am missing any repository but no result.
For some guys it looks like "mvn clean install -U" was the solution but not in my case, getting the same error.
[INFO] ------------------------------------------------------------------------
[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 01:17 min
[INFO] Finished at: 2014-12-09T11:46:34+00:00
[INFO] Final Memory: 23M/226M
[INFO] ------------------------------------------------------------------------
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-surefire-plugin:2.
12.4:test (default-test) on project am: There are test failures.
[ERROR]
[ERROR] Please refer to C:\Users\ADMIN\Documents\Code Base\Removable Disk\am
\target\surefire-reports for the individual test results.
[ERROR] -> [Help 1]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e swit
ch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please rea
d the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoFailureExc
eption
C:\Users\ADMIN\Documents\Code Base\Removable Disk\am>
One or more test(s) are failing. You have two options
Fix those test cases and try.
or
Run mvn clean install -Dmaven.test.skip. This command will skips the test phase.
Related
I was creating a custom processor in apache NIFI and in order to do it, I needed to run the cmd: mvn clean install but I have an error
[INFO] ------------------------------------------------------------------------
[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 01:59 min
[INFO] Finished at: 2020-02-21T11:50:51+01:00
[INFO] ------------------------------------------------------------------------
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-compiler-plugin:3.
8.1:testCompile (groovy-tests) on project nifi-pros-test: Execution groovy-tests
of goal org.apache.maven.plugins:maven-compiler-plugin:3.8.1:testCompile failed
: Plugin org.apache.maven.plugins:maven-compiler-plugin:3.8.1 or one of its depe
ndencies could not be resolved: Could not transfer artifact org.codehaus.groovy:
groovy-eclipse-batch:jar:2.5.4-01 from/to bintray (https://dl.bintray.com/groovy
/maven): Transfer failed for https://dl.bintray.com/groovy/maven/org/codehaus/gr
oovy/groovy-eclipse-batch/2.5.4-01/groovy-eclipse-batch-2.5.4-01.jar: Connect to
d29vzk4ow07wi7.cloudfront.net:443 [d29vzk4ow07wi7.cloudfront.net/13.225.218.65,
d29vzk4ow07wi7.cloudfront.net/13.225.218.163, d29vzk4ow07wi7.cloudfront.net/13.
225.218.41, d29vzk4ow07wi7.cloudfront.net/13.225.218.66] failed: Read timed out
-> [Help 1]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e swit
ch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please rea
d the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/PluginResoluti
onException
any help?? I'm a beginner and I googled it but no solution
Actually all it takes that instead of passing the command: mvn install enter the command: mvn install -DskipTests ! that's all it take !! because those errors are generated by testing ! so skip the test and all worked super greatly
I am using checkmarx maven plugin to perform a checkmarx scan on my javascript base project (Angular 1.6).
When I run the command mvn checkmarx:scan in output I have the error bellow.
[INFO] ------------------------------------------------------------------------
[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 3.116 s
[INFO] Finished at: 2018-04-03T17:23:31+02:00
[INFO] Final Memory: 17M/217M
[INFO] ------------------------------------------------------------------------
[ERROR] Failed to execute goal com.checkmarx.maven:checkmarx-maven-plugin:8.5.0:scan (default-cli) on project gbis-wms-common-web-client: You must set at least one file.
-> [Help 1]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoExecutionException
Any idea? thank in advance
The solution were to add a sourceDirectory> tag in the build section of my pom.xlm and it works. see bellow :
<build>
...
<sourceDirectory>./src</sourceDirectory>
...
</build>
I'm trying to install Sakai 10.2 and it gives me an error every time. I've reinstall everything, including de OS. And the error persist.
This is my current configuration:
Sakai 10.2
Maven 3.2.5
Tomcat 7.0.59
This the error:
[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------ ------
[INFO] Total time: 02:00 min
[INFO] Finished at: 2015-03-17T17:56:31+01:00
[INFO] Final Memory: 347M/829M
[INFO] ------------------------------------------------------------------------
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-surefire-plugin:2.16:test (default-test) on project entitybroker-restimpl: There are test failures.
[ERROR]
[ERROR] Please refer to C:\opt\sakai-10.x\entitybroker\rest\target\surefire-reports for the individual test results.
[ERROR] -> [Help 1]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/MojoFailureException
[ERROR]
[ERROR] After correcting the problems, you can resume the build with the command
[ERROR] mvn <goals> -rf :entitybroker-restimpl
These are de reports of the test.
EntityDescriptionManagerTest
EntityHandlerImplTest
[EntityBrokerServlet]http://pastebin.com/vWmbNXxa
There appears to be an error in the tests.
Build Sakai with -Dmaven.test.skip.
Could you also file a Jira at http://jira.sakaiproject.org with the test errors and someone can take a look.
Ok. Problem solved. I don't know how and I don't know the cause of the problem.
I've update JDK to _076 version and skip the test. It have no sense for me.
But it's done.
Thank you for your time and your help.
We have been trying to integrate kafka-storm by referring the Learning Storm book. We have followed all the steps but on execution of the following command we are getting 'Build Failure'-
mvn clean compile exec:java
-Dmain.class=com.learningstorm.kafka.KafkaTopology
and the error is as follows-
[INFO] BUILD FAILURE
[INFO]------------------------------------------------------------------------
[INFO] Total time: 3.546s
[INFO] Finished at: Sat Jan 31 11:46:58 IST 2015
[INFO] Final Memory: 7M/111M
[INFO] ------------------------------------------------------------------------
[ERROR] Failed to execute goal org.codehaus.mojo:exec-maven-plugin:1.2.1:java (default-cli) on project storm-example: The parameters 'mainClass' for goal org.codehaus.mojo:exec-maven-plugin:1.2.1:java are missing or invalid -> [Help 1]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/PluginParameterException
What should we do? Thanks in advance!
Add the dependency
<dependency>
<groupId>org.codehaus.mojo</groupId>
<artifactId>exec-maven-plugin</artifactId>
<version>1.2.1</version>
</dependency>
mvn clean install causes build error
here is the error what I am getting..
... 24 more
{[INFO] ------------------------------------------------------------------------
[INFO] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 1.707s
[INFO] Finished at: Thu Jun 12 14:09:51 IST 2014
[INFO] Final Memory: 9M/104M
[INFO] ------------------------------------------------------------------------
[ERROR] Failed to execute goal org.apache.maven.plugins:maven-dependency- plugin:2.1:unpack-dependencies (get-test-data) on project neo4j-spatial: Error unpacking file: /home/dev237/.m2/repository/org/neo4j/spatial/osm-test-data/20100819/osm-test-data-20100819.jar to: /home/dev237/Projects /spatial/target
[ERROR] org.codehaus.plexus.archiver.ArchiverException: Error while expanding /home/dev237/.m2/repository/org/neo4j/spatial/osm-test-data/20100819/osm-test-data-20100819.jar: Negative seek offset
[ERROR] -> [Help 1]
[ERROR]
[ERROR] To see the full stack trace of the errors, re-run Maven with the -e switch.
[ERROR] Re-run Maven using the -X switch to enable full debug logging.
[ERROR]
[ERROR] For more information about the errors and possible solutions, please read the following articles:
[ERROR] [Help 1] http://cwiki.apache.org/confluence/display/MAVEN/
Try renaming the repository folder "/home/dev237/.m2/repository" to make maven create a new repository and download all dependencies again.
I ran into a similar issue. This is what I did to resolve it:
cd into /home/dev237/.m2/repository/org/neo4j/spatial/osm-test-data/
rm -rf 20100819 (remove the problematic dependencies)
Re-run mvn clean install
At which point it built successfully.
This solution is arguably better than TekTimmy's as it avoids re-downloading all dependencies, regardless of if they're problematic or not. If they're all causing issues however, it may be easier to go with their solution.