When I try to save edited node Drupal just reset field values and do nothing without any error message or log.
I entered text word by word and found that word "having" cause such behavior.
I'm using ckeditor to edit and filter text value and I guess that this module source of problem. As if I save text as plain text there are no issues.
Right now I don't know what to do next to track, dig deeper and isolate this issue...
PS. In ckeditor format settings I checked only two options:
Limit allowed HTML tags and correct faulty HTML
Convert line breaks into HTML (i.e. br and p)
Related
I would like to make a Word product catalog from data stored in an Access 2007 database. I can of course use the "mail merge" function in Word for the text data, but I dont know how to make the images show up! They are they stored as file paths in Access and jpg-files in a directory on the hard drive. The images should have a special size, be right aligned to the text paragraphs so that the text is wrapping on the left side (see attached image).
This is possible, but works better in older versions of Word. Unfortunately, you don't mention which version you're using...
Anyway, the key to the question is to use an IncludePicture field to bring the picture in; pass the file path to the field using the MergeField (nested fields). You can find more information on the internet, for example: http://homepage.swissonline.ch/cindymeister/mergfaq1.htm#DBPic
The problem with an IncludePicture field is that it can't be wrapped. But if your version of Word is not too old, tables CAN wrap, so you put the IncludePicture field into a table that's a single cell. Position the table, wrap it, etc.
I want to extract the plain text in the html table (that is, I don't want to grab the information including red arrow),
However, I tried to get the plain text by cell.text, it will get the unnecessary hyperlinks' text
"\n central tendency1 \n "
I expected that I can get
"central tendency"
So I tried cell.text.strip.downcase.gsub!(/\d/, ""),
However the gsub method will also clear the information in the green rectangle.
Is there any way to grab the text in html excepting the text of hyperlink ?
here's the html link I need to parse
You can remove all the links before converting to text with nokogiri:
table = doc.css(".page table")[0]
table.css("a").each(&:remove)
Edit: Alternatively, you can have a regexp that only removes numbers at the end of a string and if they're preceded by a letter, which seems like it may work in this specific case but cannot be relied upon to work in similar cases:
cell.text.strip.downcase.gsub(/(?<=\w)\d$/, "")
I've only spent maybe 30 mins searching online for this, and couldn't come up with a decent answer.
But anyway, in Joomla there are normal input fields for the Contacts component, but there's a textarea for the Address.
This would make me assume you can enter multiple lines of address in there, and it would be displayed as separate lines... but it doesn't. Even if I enter line breaks, the output is rendered on one line.
So I try to enter <br> to separate, and upon saving, Joomla strips these tags out.
In the template, the output is being written simply by echoing $this->contact->address
Is there anyway, to explode this input and replace linebreaks with <br> marks?
UPDATE:
For now as a temporary measure I'm able to add HTML code into the database values, which saves and outputs on the front end.
On a separate note, I'm now looking to remove the Subject line from the contact form, without hacking the code. and by using overrides as much as possible. Can anyone help?
Have you tried the Sourcerer extension?
Your question is pretty old, but did you get a solution to this Lee?
To create line-breaks in Joomla, titles, text areas etc. Easiest way to do this is to use the ReReplace extension from NoNumber: http://extensions.joomla.org/extensions/edition/replace/4336
I personally use this to add line break in e.x. menu-item titles, where < br / > aren't allowed and get stripped.
With ReReplacer, you can create a custom tag e.x. {br} and then have ReReplacer replace {br} with < br / >.
So everytime you need to add a line break anywhere in Joomla, where html codes usually get stripped, you can just add {br} to have it add a new line.
Very old question but I've fallen into the same issue and tried to find a more user friendly solution.
You can enter multiple lines in the address textarea, and they are correctly outputted to the HTML page source. But as you know, newlines in HTML are not rendered, they have to be transformed to <br>.
For this PHP has a nice function, nl2br, that inserts a <br> each time it encounters a newline in a string.
So in html\com_contact\contact\default_address.php of your template, replace:
echo $this->contact->address;
with
echo nl2br($this->contact->address);
This would nicely do the job, and allow the user to naturally insert any newline in the contact address textarea that will be correctly rendered with the appropriate <br>; I believe this is quite more user friendly solution than your previous one of the user having to insert -br- tags in the address field.
I have two input fields first name and last name.
Application was running really well.
Suddenly someone came in from Mars and input something like this in those input fields
*(~'##~>?<+!""*%$)!
for both first name and last name. Now don't ask me why he did this cause in Mars this is very common. You can try it on this fiddle
http://jsfiddle.net/farrukhsubhani/3RjRF/
This text then went into my database and now when i retrieve it it came back like this
*(~'##~>?<+!""*%$)
which is ok for me as its html and I can place it back into knockout and it gets populated as html as you can see in fiddle above. However this Mars guy then thought that on Earth this is not a nice name to be with so he tried to edit field.
The above fiddle is kind of that edit page which shows him old value at bottom and two fields at top. He does not know html so he thought we have changed his name in input fields however I need to know
When passing text to knockout to give initial value to an input field is it possible to tell it that consider this text as html so it renders properly in input field
The other way around is to send him to http://www.w3schools.com/tags/ref_entities.asp and tell him about reserved HTML characters. This info has been stored in database (using Entity Framework simple person.fname and person.lname both with attribute AllowHTML) so on my fiddle i have just placed it in two variables and you can see how actual text boxes are different than html below. If i dont bind using Knockout then actual text is shown in these boxes and user can edit <>' signs without any problem.
Anyone with a solution before he leaves our planet. This can change alien life on our planet.
Update
If i go into this field and paste (~'##~>?<+!""*%$)" binding works fine and you can copy this and paste it into fiddle to see that. However its not taking that value from Javascript variable to knockout expects it to be a string and html special characters are not shown properly in input field.
We have done another test without Knockout and this text does get rendered within the field when you try to edit it its fine.
We have updated JSfiddle to work without JQuery and its the same result if you store it in a js variable and give not value to input field
http://jsfiddle.net/farrukhsubhani/3RjRF/3/
If we assign value to input field and just use jQuery to populate fullname then it works
http://jsfiddle.net/farrukhsubhani/3RjRF/4/
This last fiddle is a working example and we want Knockout to do what JQuery is doing.
I think the question then comes to how can this text be stored in javascript variable and placed into input field as html text so special characters appear unescaped. You can try unescape on jsfiddle that did not work for us.
Somewhere along the trip into (or maybe out of) your database, the value is being HTML-escaped. It's not Knockout itself that's doing it. You're going to need to track that location down, but you can't just disable it; you're going to have to replace it with something that sanitizes the result or otherwise you're opening yourself up to cross-site scripting attacks (any <script>s from external sources inserted into the input would have complete access to your data).
Any time you see the html: binding used, warning bells should go off in your head and you should VERY carefully to check to ensure that there's NO possibility of raw, unexamined user input making it into the string that gets displayed.
Ok here is what i did at the end
http://jsfiddle.net/farrukhsubhani/3RjRF/7/
I have done following:
I have added value attribute to input field and placed the input text as it came from server into it. Because I am using TextBoxFor in MVC it did that for me.
Before I apply knockout binding I have picked this value up using $('#kfname') and passed it to the actual binding so it used the value that came from server. Previously it was passed like (#Model.fname,#Model.lname)
I think what this did was allowed jQuery to pick up the value and assign it to binding instead of variable
ko.applyBindings(new ViewModel($("#kfname").val(), $("#klname").val()));
Hopefully this would help someone using knockout.
CKeditor apparently automatically creates matching end tags when you enter a start tag. Is there a way to turn this behavior off?
I have a situation where I am creating two blocks of text in an admin program using CKeditor, then I'm using these to paint a page with the first block, some static content, and then the second block. Now I've got a case where I want to wrap the static content in a table. I was thinking, No problem, I'll just put the <table> tag in the first block and the </table> tag in the second block, and the static content will be inside the table. But no, CKeditor insists on closing the table tag in the first block.
In general, I can go to source mode and enter HTML directly, but CKeditor then decides to reformat my tagging. This seems to rather defeat the purpose of having a source mode. (I hate it when I tell the computer what I want and it tells me, No, you're wrong, I know better than you what you want!)
CKEditor produces valid HTML. Valid HTML has to include both - start and end tags. There's no way to change this behaviour without hacking editor. Note that even if you'll force editor to produce content without one of these tags it will then try to fix this and won't do this as you expect. E.g. load:
<p>foo</p></td></tr></table>
And you'll completely loose this table so only regexp based fix on data loading could help. In the opposite case:
<table><tr><td><p>foo</p>
You'll end up with paragraph wrapped with table, so it's better. But what if someone would remove this table from editor contents?
Therefore you should do this integration outside editor - prepend table to contents of one editor and append to contents of second one. You simply cannot force editor to work on partial HTML.