I am trying to compare strings in bash. I already found an answer on how to do it on stackoverflow. In script I am trying, I am using the code submitted by Adam in the mentioned question:
#!/bin/bash
string='My string';
if [[ "$string" == *My* ]]
then
echo "It's there!";
fi
needle='y s'
if [[ "$string" == *"$needle"* ]]; then
echo "haystack '$string' contains needle '$needle'"
fi
I also tried approach from ubuntuforums that you can find in 2nd post
if [[ $var =~ regexp ]]; then
#do something
fi
In both cases I receive error:
[[: not found
What am I doing wrong?
[[ is a bash-builtin. Your /bin/bash doesn't seem to be an actual bash.
From a comment:
Add #!/bin/bash at the top of file
How you are running your script?
If you did with
$ sh myscript
you should try:
$ bash myscript
or, if the script is executable:
$ ./myscript
sh and bash are two different shells. While in the first case you are passing your script as an argument to the sh interpreter, in the second case you decide on the very first line which interpreter will be used.
Is the first line in your script:
#!/bin/bash
or
#!/bin/sh
the sh shell produces this error messages, not bash
As #Ansgar mentioned, [[ is a bashism, ie built into Bash and not available for other shells. If you want your script to be portable, use [. Comparisons will also need a different syntax: change == to =.
if [ $MYVAR = "myvalue" ]; then
echo "true"
else
echo "false"
fi
I had this problem when installing Heroku Toolbelt
This is how I solved the problem
$ ls -l /bin/sh
lrwxrwxrwx 1 root root 4 ago 15 2012 /bin/sh -> dash
As you can see, /bin/sh is a link to "dash" (not bash), and [[ is bash syntactic sugarness. So I just replaced the link to /bin/bash. Careful using rm like this in your system!
$ sudo rm /bin/sh
$ sudo ln -s /bin/bash /bin/sh
If you know you're on bash, and still get this error, make sure you write the if with spaces.
[[1==1]] # This outputs error
[[ 1==1 ]] # OK
Specify bash instead of sh when running the script. I personally noticed they are different under ubuntu 12.10:
bash script.sh arg0 ... argn
Execute in your terminal:
sudo update-alternatives --install /bin/sh sh /bin/bash 100
Make the file executable and then execute without sh.
make it executable by $ chmod +x filename
then instead of sh filename use ./filename
Related
When I run the following script :
#!/bin/sh
declare path="my.path"
if [[ "$path" =~ \. ]] ; then
echo "yes"
else
echo "no"
fi
I got yes printed.
But if I am not mistaken, declare and [[ ]] are not available in POSIX shell ; so how come this script does not throw any error ?
I run the script on git for Windows, could it explain this odd behavior ?
/bin/sh is a link to your actual shell. It does not mean that you are running pure POSIX. The Git for windows homepage makes very clear that you are running bash, as does your git-bash tag.
Even on Linux, /bin/sh can still be bash:
ls -la /bin/sh
lrwxrwxrwx. 1 root root 4 Mar 27 09:33 /bin/sh -> bash
I'm getting started with bash scripting and made this little script following along a short guide but for some reason when I run the script with sh myscript I get
myscript: 5: myscript: 0: not found running on ubuntu 12.04
here is my script below I should at least see the echo message if no args are set:
#!/bin/bash
#will do something
name=$1
username=$2
if (( $# == 0 ))
then
echo "##############################"
echo "myscript [arg1] [arg2]"
echo "arg1 is your name"
echo "and arg2 is your username"
fi
var1="Your name is ${name} and your username is ${username}"
`echo ${var1} > yourname.txt`
`echo ${var1} > yourname.txt`
Get rid of the backticks.
echo ${var1} > yourname.txt
...for some reason when I run the script with sh myscript...
Don't run it that way. Make the script executable and run it directly
chmod +x myscript
./script
(or run with bash myscript explicitly).
It looks like that expression will work in bash but not in sh. As others pointed out change it to executable, make sure your shebang line is using bash and run it like this:
./myscript
If you want to run it with sh then it is complaining about line 5. Change it to this and it will work in /bin/sh.
if [ $# -ne 0 ]
Check out the man page for test.
Also you don't need the backticks on this line:
echo ${var1} > yourname.txt
#!/bin/bash
if [ ! -f readexportfile ]; then
echo "readexportfile does not exist"
exit 0
fi
The above is part of my script. When the current shell is /bin/csh my script fails with the following error:
If: Expression Syntax
Then: Command not found
If I run bash and then run my script, it runs fine(as expected).
So the question is: If there is any way that myscript can change the current shell and then interpretate rest of the code.
PS: If i keep bash in my script, it changes the current shell and rest of the code in script doesn't get executed.
The other replies are correct, however, to answer your question, this should do the trick:
[[ $(basename $SHELL) = 'bash' ]] || exec /bin/bash
The exec builtin replaces the current shell with the given command (in this case, /bin/bash).
You can use SHEBANG(#!) to overcome your issue.
In your code you are already using she-bang but make sure it is first and foremost line.
$ cat test.sh
#!/bin/bash
if [ ! -f readexportfile ]; then
echo "readexportfile does not exist"
exit 0
else
echo "No File"
fi
$ ./test.sh
readexportfile does not exist
$ echo $SHELL
/bin/tcsh
In the above code even though I am using CSH that code executed as we mentioned shebang in the code. In case if there is no shebang then it will take the help of shell in which you are already logged in.
In you case you also check the location of bash interpreter using
$ which bash
or
$ cat /etc/shells |grep bash
I am trying to compare strings in bash. I already found an answer on how to do it on stackoverflow. In script I am trying, I am using the code submitted by Adam in the mentioned question:
#!/bin/bash
string='My string';
if [[ "$string" == *My* ]]
then
echo "It's there!";
fi
needle='y s'
if [[ "$string" == *"$needle"* ]]; then
echo "haystack '$string' contains needle '$needle'"
fi
I also tried approach from ubuntuforums that you can find in 2nd post
if [[ $var =~ regexp ]]; then
#do something
fi
In both cases I receive error:
[[: not found
What am I doing wrong?
[[ is a bash-builtin. Your /bin/bash doesn't seem to be an actual bash.
From a comment:
Add #!/bin/bash at the top of file
How you are running your script?
If you did with
$ sh myscript
you should try:
$ bash myscript
or, if the script is executable:
$ ./myscript
sh and bash are two different shells. While in the first case you are passing your script as an argument to the sh interpreter, in the second case you decide on the very first line which interpreter will be used.
Is the first line in your script:
#!/bin/bash
or
#!/bin/sh
the sh shell produces this error messages, not bash
As #Ansgar mentioned, [[ is a bashism, ie built into Bash and not available for other shells. If you want your script to be portable, use [. Comparisons will also need a different syntax: change == to =.
if [ $MYVAR = "myvalue" ]; then
echo "true"
else
echo "false"
fi
I had this problem when installing Heroku Toolbelt
This is how I solved the problem
$ ls -l /bin/sh
lrwxrwxrwx 1 root root 4 ago 15 2012 /bin/sh -> dash
As you can see, /bin/sh is a link to "dash" (not bash), and [[ is bash syntactic sugarness. So I just replaced the link to /bin/bash. Careful using rm like this in your system!
$ sudo rm /bin/sh
$ sudo ln -s /bin/bash /bin/sh
If you know you're on bash, and still get this error, make sure you write the if with spaces.
[[1==1]] # This outputs error
[[ 1==1 ]] # OK
Specify bash instead of sh when running the script. I personally noticed they are different under ubuntu 12.10:
bash script.sh arg0 ... argn
Execute in your terminal:
sudo update-alternatives --install /bin/sh sh /bin/bash 100
Make the file executable and then execute without sh.
make it executable by $ chmod +x filename
then instead of sh filename use ./filename
I've got following bash script to do something for each parameter of the script
#! /bin/sh
while (($#)); do
echo $1
shift
done
But somehow, if I start it with the command sudo ./test.sh foo1 foo2 it wont work. And the real strange thing is, that if I enter sudo bash test.sh foo1 foo2 it works. Does anybody know what causes this strange behaviour?
You have specified /bin/sh as your interpreter, which may not be bash. Even if it is bash, bash runs in POSIX mode when called as /bin/sh.
The (( )) command is a bash-specific feature. The following will work in any POSIX compliant shell:
while [ $# -gt 0 ]; do
echo $1
shift
done
Have you tried #!/bin/bash rather than sh?
Here's a link explaining the difference:
http://www.linuxquestions.org/questions/programming-9/difference-between-bin-bash-and-bin-sh-693231/
This will work in either sh or bash:
for arg
do
echo "$arg"
done
and it does the same thing as your script is intended to do without destroying the argument list.