I am creating a prank, witsh floods the screen with bananas, and ran into a problem that alway occurres, when i create applicationes.
When you try to open it, it shows a message saying:
"Are you sure that you want to open a application witch has no verified creator?"
This Message is very annoying, because, no one will open the banana prank.
Is there a way to get around this problem?
Related
A user that works in my company has an Error 13 Type mismatch in the moment that she wants to input some data in a grid.
The thing is that when she has that problem, my application only shows the error screen and nothing more (I mean it doesn't say where the error occurs).
I want to know if there is a way that I can "see" the problem in a debug application because I don't have the source code of my application in this computer and I don't know if the problem is because of a Windows configuration issue or why this error pops up provided that when she uses another terminal, different to the one that she normally uses, she can do her job without problems (they have the same settings in the two pcs).
I have the source code in my terminal but as say above, in my terminal the error doesn't pop up so I need to see it in her terminal.
How can I do this?
n00b here. After searching the forums I have not yet come across this problem as I am experiencing it.
I have a CI site that was working correctly until about three days ago. My problem is as follows:
On button click - Page Loads correctly.
On Enter press - CI Blank Page of Death loads.
For example: When I login, after the login process has run it must reroute me to the Dashboard, unless I still have a temporary password where I get rerouted to the "Change Password" screen first and then to the Dashboard.
AS LONG AS I USE THE BUTTONS AND CLICK THEM EVERYTHING WORKS.
On ENTER PRESS, I get the Blank Screen of Death.
However, on TAB to BUTTON and then ENTER it works.
The problem is not consistent however. I have some processes that do not have views attached and NONE of them will run - hit ENTER and get blank. They are all failing on ENTER PRESS.
I am slowly going off my trolley. Logging is ON, Directories for cache and logs are 775. NOTHING is showing in my logs...
First Try to active error handlers for displaying of errors for addittional info to post here what error is occuring..
// change settings for error handler to show errors
// $this setup is used for checking errors for development to be shown....
ini_set('display_errors', 1);
error_reporting(E_ALL);
by the way if your using CI version 2 higher
you can see it in its index.php file an configuration for displaying error also.
define('ENVIRONMENT', 'development'); //just set up environtment to development
Even though there are accepted answers I wanted to add a way that worked for me to figure out this problem.
Usually the "Blank Page" indicates a PHP parsing error somewhere in the code. Strange thing for me was that on my local MAMP based test server the code ran fine. I FTP it to my hosted server and all of a sudden, blank page of death.
Even though I had errors on, log errors on, display errors on, nothing appears in any log file.
I was able to find the error by a funny little trick. I added an echo line in CodeIgniter.php in the system/core. Obviously hacking the core was not a great idea but all I wanted to do was to see how far it was getting in the load process.
When my echo appeared after trying to load a page on the remote hosted server it also displayed the parsing problem in a derived controller! Not sure why the error did not come out without the "echo" added. But adding it seemed to trigger some output to be generated, IE my echo line and the PHP parse error was appended.
Not sure if this will help anyone but it turned out to be a nice easy way to find the error which only showed on the remote server.
Obviously, don't forget to put your core file back to its original state without the echo.
This was fixed by copying the application into a fresh CI 2.3 install.
I have no idea what actually caused this "erratic" behaviour.
The application worked correctly as designed whenever a BUTTON was CLICKED but gave the blank death screen when ENTER was PRESSED.
This inconsistent behaviour is what threw me. The fact that my logs (CI and APACHE) also showed nothing was also very strange. Had this been a parse error, surely the behaviour on "Click" and on "Enter Press" should have been the same.
My non-view controllers for various ad-hoc admin jobs are now also working correctly, which they were not before, as they use "Enter Press" (having no buttons to "Click").
I am still going to invite best guesses as to why this behaviour occurred the way it did.
Surely someone out there (Phil Sturgeon et al) with extensive CI experience has encountered this non-consistent blank screen behaviour and knows what caused it.
Thank you to all the people who took the time and effort to assist me!!!
Big UP!!! StackOverflow!!!
probably error in INCLUDE login.php
My problem was Apache stop working because of ...Skype! Skype actually work on the same 443 and Apache didn't start! I hate this Skype! Bring me nuts for a while.
Installing php5-pgsql worked for me
I have an app with a crash reporter that autofills in the user email address by getting it from ABAddressBook. I'm trying to get an informative message of intent in the dialog that 10.8 displays asking the user for permission. Following the advice at http://www.red-sweater.com/blog/2672/can-i-get-your-address , I've added the following to the app's Info.plist:
<key>NSContactsUsageDescription</key>
<string>blah blah blah</string>
Unfortunately, this is not working. The dialog still asks, but it does not display my description text. I've tried:
Putting this in the crash reporter framework's Info.plist instead of the app's.
Signing the app with my Developer ID cert.
But, alas, no luck. Anyone gotten this to work that can give me a tip as to what I'm doing wrong?
[UPDATE] I found the real reason why restarting helps. It kills the tccd process, which looks like the culprit in charge of displaying the message on that dialog.
So, just open Activity Monitor and kill the tccd process and your new message should just show up next time the dialog shows.
[Old Answer]
I was running into the same problem and wasn't really sure why (I was doing exactly what the documentation said to do). I finally got it working after:
Deleting the container my app was living in (~/Library/Containers/com.company-name.app-name)
Cleaning the build (In Xcode: Product -> Clean)
Restarting my machine (seems a little cargo-cultish, but I think this is what fixed the problem)
Building and running my app
The next time my app tried to access the Address Book API I was presented with the dialog that included my message.
I think Apple must be caching that message somewhere (either the message you want, or an empty string if you ran your code before you had a message to show), and the only way to clear it out is to restart. I tried the first 2 steps many times with no change in the message, even after I got the message working and then tried to change it.
Solution is to run this command in the Terminal:
tccutil reset AddressBook
Source: https://developer.apple.com/library/archive/qa/qa1906/_index.html
I am creating a newsstand application. the application is ready, now i am trying to upload the app in apple store using Application Loader. While uploading the zip file its showing the error message as
Unable to process application info.plist validation at this time due to a general error (1095)
I googled this in the net, but did not find the solution still.
This is clearly an Apple server issue, not an Xcode/iOS/OSX issue. Just wait patiently and Apple's servers will catch up to the traffic, or solve whatever issues they're having at their end.
If you're anxious, feel free to just sit there and restart Xcode until it works - but it's not restarting Xcode, only the time you waste that's solving the issue.
While you're waiting, run your apps in Instruments and solve some performance issues ;)
I just had this error. I waited an hour and tried again with the exact same build and it was all good. Vote for it being Apple's temporary glitch.
I had the same problem. I closed Xcode, restart my computer and it worked.
One possible problem to this is corrupted png files. The png files should not be interlaced
I found a solution to the problem.
If you're using Xcode 4+, you don't have to use Application Loader anymore. Instead you should archive your project in Xcode (Product->Archive). It will then open the organizer, where 3 buttons are displayed. Hit the submit button.
If you've created an entry for your app with Itunes Connect, you should be able to choose that from the list, and then select your distribution profile. Then hit the next button, and you should get a message, that tells you, that your app has been submitted.
At least that worked for me.
Use Application Loader.
I'm getting this a lot today.
Application Loader worked.
XCode > Project > Archive
XCode > Organizer > Distribute > Enterprise/add Hoc > Save As
Saves as YOURAPP.ipa.
Make sure Save for Enterprise Deploy remains UNCHECKED.
Download latest Application Loader.
tap 'Deliver Your App'
make sure new version in itunes connect in WAITING FOR UPLOAD state
Click on Activity... button
TIP: open Console.app to see XCode Validation errors
Click on ALL MESSAGE on list of logs on right.
Then in search enter 'XCode' or 'Application Loader'
to monitor any errors with your upload.
Note:
I did all this and still got email about missing 120x120 icons.
Forgot to update them in Build Target > General Tab
List of new icon requirements for iOS7
http://www.icenium.com/resources/forums/icenium-general-discussion/missing-recommended-icon-file
Another reason why this can happen is the duplicate product name. Despite your app names, executable names, display names or bundle IDs are different, if the product name exists in your current apps this error is gonna occur.
"The server returned an invalid response. This may indicate that a network proxy is interfering with communication, or that Apple servers are having issues. Please try your request again later.""
Reset The internet connection.
Reopen the xcode.
Set the profile again.
Clean build.
And Archive the build.
Works perfect for me (With in 5 minutes no need to wait).
Thanks
It's just the time, because you can't control Apple's Server's traffic problem, We all merely become the victim of that..So cut the long story short...
By restarting XCODE may work but everyone as in my case, i tried by restarting XCODE, SYSTEM, ROUTER and anything and everything possible, only error name had changed from "The network connection was lost" to "The request timed out" and vice Versa..!
Just think at what time less people would be accessing the sever...
PS: Only perseverance can help you in this way..keep redialing..And WAIT and WATCH:P
I solved ... :)
Please remove all your icons and splash image also remove icon Files and icons File( IOS 5 ) from info.plist and then add all your icons to app bundle ...
After this update info.plist iconFiles field add desired name of icons....
And last but not least remove Provisioning profile from developer portal and recreate it ...
Clean your build and Archive it and using Application Loader submit it to AppStore ...
it work for me and i think it may help you...
Not every time not it is Apple server issue,sometime we did some bad linking according to me :)
The only error I ever get is SIGABRT in main. This is getting incredibly frustrating as I have to guess what line caused the error and why.
This is a far cry from visual studio's informative error messages. It's basically like sending off an entire novel to an editor and the only notes you get back are: "There is a problem somewhere in your book. There may be many or just one and they are either gramatical or to do with spelling."
I just don't know how anyone can work like this. What am I doing wrong? Surely I'm missing something essential.
Write some NSLog() into your code and you'll see it in the console. It's a great help to narrow down a crash.
if you have encountered memory problems (aka – your app crashes for no apparent reason because you attempted to use an object that you deallocated to soon) setting NSZombieEnabled = YES can help you diagnose the problem.
Normally, when your app crashes in this way and you look at the log it tells you nothing (thanks Apple!). However, if you select your executable (under Executables in Xcode), hit the info button (round blue thing at the top), select arguments and put this in the bottom screen NSZombieEnabled = YES the log will give you more information.
Now, if your app crashes the log will have an indication of the object you attempted to access that has already been deallocated. Not forget to turn it off before you deploy it – you don’t want a bunch of nszombies running around your clients phones…
http://howtomakeiphoneapps.com/nszombie-and-xcode-oh-my/27/