I'm using DataGrip v 2021.3.4 of JetBrains. I connect to MariaDB hosted in AWS. The database has 28 tables, though only fifteen (15) are displayed in the Database Explorer.
Interesting thing is, I can see all the tables if I go to "show visualization":
So far this is my only workaround to get to any of the 'hidden' tables, as the visualization window allows me to right-click and select "jump to source", from there I can work on the table or switch to "edit-data" if needed:
This would be an acceptable workaround if the table names and column names were recognized and hopefully auto-populated with the DataGrip interface, but instead, I get the red-underlined table names in my .SQL with errors displayed saying that:
Unable to resolve table 'table name'
Just to clarify, executing my queries actually works and I get the expected result. The problem is that I compose my queries in the blind.
Things I've tried:
refreshing the list of tables.
disconnecting and reconnecting to the
live database.
searching for a possible solution in here, on the StackOverflow website.
Anything else you would recommend me to try?
Thank you,
Update #1 [May 1, 2022]:
Upgraded DataGrip to 2022.1.2, removed some tables, down to 21 total, still limited to 15.
Some more details, in case this becomes a question:
MacOS v11.2.3 (BigSur), 16-core Intel-based CPU, 64Gb Memory
Posting this answer in case it would save time for anyone landing on this post seeking to get answers to the same issue I was having.
DataGrip UI has two places where the list of visible tables can be filtered, and those filters are compound.
First is a main filter next to Data Explorer:
The second place is under Data Sources and Drivers -> Schemas -> Object filter options.
Related
I have recently started using JetBrains DataGrip as a replacement for HeidiSQL.
My issue relates to the list of tables in the Database Explorer. We have a large database (700+ tables) and scrolling to find the table I'm looking for is rather cumbersome. For a table with a nice, long, specific name I can just start typing and get the highlighting on the table names, which usually takes me right where I need to go:
But if I'm trying to get to the table user and we have lots of other tables with "user" in the name in various positions, the highlighting tool only takes me to the first table with "user" in the name, which is not the actual "user" table (and because we have tables with names like billingUsers, it doesn't scroll to anywhere near the actual user table that I'm looking for).
What other methods should I be using when I want to find a particular table in DataGrip? In HeidiSQL, there was the "filter tables" box which would filter the list of tables based on the search term, which got me much closer to my intended destination much more quickly. Does DataGrip have any sort of "quick filter" like this? Or is there some other tool or prompt I should use to go directly to this table instead?
During the writing of this question I came across the "double Shift" shortcut, which is helpful and closer to what I'm looking for -- though in my case I have several of our development environments configured in DataGrip, and it lists the table in every environment - whereas in the Database Explorer, I usually only have one environment expanded at a time (and only want to see results from that database, not the others).
StackOverflow suggested this question to me, which has the same issue as the double-Shift shortcut -- it shows results from all databases, not just the one I'm working in.
I am from the DataGrip teram. We are currently working on that and expecting the filtering functionality in 2022.3. Anyway, now there are several workarounds (and Shift+Shift is one of them). See them here:
https://youtrack.jetbrains.com/issue/DBE-3017/Show-only-filtered-items-when-typing-in-the-database-explorer
We are having a bizarre issue with our 2016 on-premise CRM Quick Find View. Basically, we are not able to use Quick Find View to search for some active records (incidents to be exact).
When we go to the incident's All Active Incidents view and use the search bar (which uses Quick Find View), we are able to search for some active records, yet are unable to search for some others.
We have configured the incident's Quick Find View to search in columns such as ticket number and title. I have compared two such records (one returning and one non-returning) together side-by-side in the SQL Management Studio, and all seems OK.
At first I thought the columns we are searching in might have invalid characters in them for the non-returning record. But that is not the case.
Also, the column names are selected in the Add Find Columns configuration of the Quick Find View. So that's not the cause either.
Any help is greatly appreciated.
Upon more investigation, we realised that any case and query record created on or after a certain date could not be searched for. Any other record created before that date could be searched for.
We don't know what exactly happened to the CRM SQL database server on that date, however we decided to restart the SQL services on the server and it seems to have resolved the issue. All case and query records are now searchable.
We are still trying to find what caused the issue. I will update this answer as soon as we find the cause so that it might help others.
Thank you all for your suggestions.
I used Access 2007 to convert an MDB database from Access 1997 to ACCDB format. For RecordSource, both use the following query:
This query works as the DataSource for combining two tables into one grid when using the old MDB database, but when I use it with the ACCDB file it only shows the fields from the smaller database, not the combined ones.
In Design mode in VB6, the Data View uses the same query and shows the combined files. When I click Run in Access, it also works there.
I made a simple test program - a form with a grid and a data control. If I use as a record source "select * from Bids" it displays all the Bids table in the grid, but the query doesn't work to add the second table.
Unfortunately, I created this query about a dozen years ago and don't remember how I came up with the query in SQL format and can't make sense of the screenshot above; I've Googled but can't find how to get the SQL command from what's displayed in the screenshot.
I've struggled with the conversion for over a week, one problem after another, and each research by scouring the Web, but I am now at an impasse.
I have an interactive report in one of my APEX application. The SQL query used in the IR runs pretty fine when executed in SQL Developer.
But, at times in the application it gets stuck and requires more time than usual to load the IR. (Usually it takes less than 5 secs to load but at times more than 50 secs).
What might be the possible reasons for it to load slow ?
The query is well tuned and IR has default settings with no modification. I have also checked the stats on the tables and it is fresh.
The SQL query used in IR fetches 10k records.
If you go into Component View and then click Interactive Report under Regions, there is a setting near the bottom under the Performance heading called Maximum Rows To Process. Also limiting the number of rows to display sped things up for me.
Sorry but i can't write comments. Is there any database view in your query?
I have similar situation where query from database view with 6 mil. records take around 3 min to complete in Oracle Apex IR and 10-15 seconds in SQL Developer. So after some research i try to put sql from view directly into IR and result was almost same as this in SQL Developer.
Also You can remove pagination from IR or change it from "x to y from z" to be only "x to y".
I hope this can help you.
Query response time in SQL Developer versus any other Web browser cannot be compared directly. Some of the reasons for its slugishness could be related to server setup, server load, current user traffic, page load processes, page and region rendering, number of regions,components and plugins, navigation menu query, report query, number or columns and rows being displayed, row content length, apex items especially LOV with SQL queries, etc.
From your question, it looks like performance issue is not consistent and so, I think issue may be related to server setup or traffic. Try to check if you see any difference in load time after bouncing the server, if that's an option. Try to isolate the problem and if the issue is specific to interactive report, build a classic report and compare times.
Another thing that has helped me in past is to compare and verify compute times using APEX Debugger, here is the screenshot.
Also look at network and timeline tabs in Chrome debugger,
Implement indexes on your tables
Verify with your DBA if you have database locks
Verify the amount of logs in Database
Switch to classic reports.
Regards
In Oracle SQL Developer, one can list the data in a table using the Data tab when viewing a table. There is also a 'Sort...' button to set the sort order of the data you are viewing. This can be very handy for viewing some data on the fly.
The problem: I set a sort order for viewing a particular table which is not supported by the indexes on that table. It seems that SQL Developer does the sort on the fly when you go to view that data. At first the delay wasn't too bad. But the table has grown and now it takes forever. There is no way to stop it except by force quitting SQL Developer, losing anything unsaved. (If you know another way to stop this sort, let me know!) So, I should change the viewing sort order to something else, but you can only access the Sort... button when viewing the data.
Is there another way to delete the viewing sort order besides viewing the data?
Where does SQL Developer store this information?
Any way to stop the sorting of the data after clicking on the data tab while waiting for it to appear?
Easy to fix (at least in v1.5.5, which is what I'm using). There's a prefs option to reset it, read about it here:
https://forums.oracle.com/forums/thread.jspa?threadID=860431
Go to Tools > Preferences > Database > ObjectViewer Parameters and select the Clear button. This will clear the sort settings.
I haven't found a command from the GUI to eliminate the sort order but you can use this workaround:
Go in the sqldeveloper settings folder. On M$ Windows is located in %HOME_USER%/Application Data/SQL Developer
Perform a full text search specifying the name of the sorted column. If the column's name is too common (ex: data) specify another column with a different name in the same table. You will find one or more xml files matching your searching criteria. Those files are table descriptors.
At the end of the xml descriptor search for the taf element with name 'orderByClause'. If it contains the name of the column you want eliminate from sorting replace the line with an empty element ()
Restart sqldeveloper and ... sort is not there anymore!
Hope this helps
Cheers,
Fabrizio Fortino
If you are willing to take a little risk, you can follow start by doing Fabrizio's suggestion, and then clean house as follows:
Go in the sqldeveloper settings folder. On M$ Windows is located in %HOME_USER%/Application Data/SQL Developer
Perform a search using the following mask "*tablesettings.xml".
Delete the files that were returned to you.
Restart sqldeveloper and your problem is gone.
To be safe, you might want to just move those files to a quarantine directory.
I believe there isn't currently a way, but there is a suggested enhancement not to retain the filter between sessions that you can vote on here on the SQL Developer forum
Go in the sqldeveloper settings folder. On M$ Windows is located in %HOME_USER%/Application Data/SQL Developer
On SQLDEveloper Version 3.0.03 (and up I guess) search for *GridSettings.xml
Find the file containing xml related to your table/view.
Either delete the file or remove only the lines corresponding to the columns previously deleted from the table. You need to remove lines from ; ;
You don't need to restart sqldeveloper. Just disconnecting and connectting back did it for me.