I attempt to use 'hostapd-2.10' generic release,
try to run with "owe-transition" mode, reference:
https://posts.specterops.io/war-never-changes-attacks-against-wpa3s-enhanced-open-part-2-understanding-owe-90fdc29126a1
with given cloned(or directly create) .conf file.
Yet, hostapd daemon can't launch SAP properly,
err pattern alike:
...
nl80211: Create interface iftype 3 (AP)
Failed to create interface muap0_0: -14 (Bad address)
Failed to add BSS (BSSID=08:97:98:08:d5:19)
...
I wonder if anyone had succeed?
.conf content as below:
enter image description here
THX.
Related
getting below error while starting the database:-
startup
ORA-01078: failure in processing system parameters
ORA-01565: error in identifying file '+DATA/mis/PARAMETERFILE/spfile.276.967375255'
ORA-17503: ksfdopn:10 Failed to open file +DATA/mis/PARAMETERFILE/spfile.276.967375255
ORA-04031: unable to allocate 56 bytes of shared memory ("shared pool","unknown object","KKSSP^24","kglseshtSegs")
Your database cannot find the SPFILE (newer init.ora) within ASM with the actual system parameters or has no permissions to access it.
Either your Grid Infrastructure stack or the dbs/spfile.ora is pointing to the wrong file.
To find out what the grid infrastructure stack is using, run "srvctl" which should display the parameterfile name the database should be using
srvctl config database -d <dbname>
...
Spfile: +DATA/<dbname>/PARAMETERFILE/spfile.269.1066152225
...
Then check (as the grid user), if the file indeed is not visible (by using asmcmd):
asmcmd
ASMCMD> ls +DATA/<dbname>/PARAMETERFILE/
spfile.269.1066152225
If the name is different, then you got the issue... (and you have to point to the correct file).
If the name is correct, then it could be wrong permissions on the oracle executable(s) (check My Oracle Support):
RAC Database Can't Start: ORA-01565, ORA-17503: ksfdopn:10 Failed to open file +DATA/BPBL/spfileBPBL.ora (Doc ID 2316088.1)
I had problem when run my revel app on windows
it create fine but don't run when I try so only get this. any idea?
C:\Desarrollo\Web\webpro>revel run -a webpro
Revel executing: run a Revel application
WARN 05:53:33 harness.go:175: No http.addr specified in the app.conf listening on localhost interface only. This will not allow external access to your application
Changed detected, recompiling
Parsing packages, (may require download if not cached)... Completed
ERROR 05:53:38 build.go:406: Build errors errors="C:\\Users\\Mario\\go\\pkg\\mod\\github.com\\revel\\revel#v1.0.0\\cache\\memcached.go:11:2: no required module provides package github.com/bradfitz/gomemcache/memcache; to add it:\n\tgo get github.com/bradfitz/gomemcache/memcache\nC:\\Users\\Mario\\go\\pkg\\mod\\github.com\\revel\\revel#v1.0.0\\cache\\redis.go:10:2: no required module provides package github.com/garyburd/redigo/redis; to add it:\n\tgo get github.com/garyburd/redigo/redis\nC:\\Users\\Mario\\go\\pkg\\mod\\github.com\\revel\\revel#v1.0.0\\cache\\inmemory.go:12:2: no required module provides package github.com/patrickmn/go-cache; to add it:\n\tgo get github.com/patrickmn/go-cache\n"
C:\Users\Mario\go\src\webpro\C:\Users\Mario\go\pkg\mod\github.com\revel\revel#v1.0.0\cache\memcached.go:11
WARN 05:53:38 build.go:420: Could not find in GO path file=C:\\Users\\Mario\\go\\pkg\\mod\\github.com\\revel\\revel#v1.0.0\\cache\\memcached.go:11
ERROR 05:53:38 harness.go:239: Build detected an error error="Go Compilation Error (in C:\\Users\\Mario\\go\\pkg\\mod\\github.com\\revel\\revel#v1.0.0\\cache\\memcached.go:11:2): no required module provides package github.com/bradfitz/gomemcache/memcache; to add it:"
Error compiling code, to view error details see proxy running on http://:9000
Time to recompile 5.3684655s
I am newer ok
Best
Check your IPv4 address with the ipconfig command
Open webpro/conf/app.conf and paste the IPv4 address into the http.addr parameter
In my service configuration TimeoutStartSec == 100s.
According to man page.. my Application need to notify to systemD sd_notify(READY=1) during <100s. If not service is put into failed state.
https://www.freedesktop.org/software/systemd/man/systemd.service.html
But in case of i want to do something ( eg just print out some log said : startup is not done in time ) . before my service is actually set to failed state .
Is there any change to do that...
My idea is create a timer which have same value with TimeoutStartSec == xx s
then i can manage to do something before timer expired.
But the question is TimeoutStartSec == xx is dynamicaly configured by user - in my project..
So i would expect some Dbus interface which will offer to read TimeoutStartSec from my application...
I checked
https://www.freedesktop.org/wiki/Software/systemd/dbus/
but did not found a corresponding property.
I am using systemD on Linux which freely use systemD Dbus interfaces.
I found solution .
SystemD actually provide that info
dbus-send --system --dest=org.freedesktop.systemd1 --print-reply /org/freedesktop/systemd1/unit/ServiceName_2eservice \
org.freedesktop.DBus.Properties.Get string:org.freedesktop.systemd1.Service string:TimeoutStartUSec
Note: your name of service need to modify to get exactly object path ServiceName.service adapt to ServiceName_2eservice
Hi I have installed Kamalio it start first time but when I stop and start it again it gives sctp_core_destroy(): SCTP API not initialized . I have already installed sctp module.
yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg
load_module(): could not find module <db_mysql> in </usr/lib/kamailio/modules>
[sctp_core.c:53]: sctp_core_destroy(): SCTP API not initialized
From the log it is obvious that you have successfully compiled & installed SCTP module, however it could NOT be initialized.
Note that is error could must often than not be as a result of other errors in your cfg file.
Few tips:
Can you run kamailio -c and to be sure there is NO error in your cfg.
Found error? use this command to monitor what the exact issue is. Run from a different terminal tail -fn200 /var/log/syslog
On the second terminal try restarting you Kamalio server sudo service kamalio restart
Revisit terminal 1 and look out for the first line with CRITICAL output like the one below CRITICAL: <core> [core/cfg.y:3413]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 366, column 41: syntax error
Line 366 mostly is the issue so visit that file at that line (366) to fix the proble
sudo nano +366 /usr/local/etc/kamailio/kamailio.cfg
Let me know if it helps
I am trying to setup a network in the container (using Docker's libnetwork and libcontainer), but I keep running into this issue. As far as I can tell it's looking into some_app to get some sandbox information?
INFO[3808] No non-localhost DNS nameservers are left in resolv.conf. Using default external servers : [nameserver 8.8.8.8 nameserver 8.8.4.4]
INFO[3808] IPv6 enabled; Adding default IPv6 external servers : [nameserver 2001:4860:4860::8888 nameserver 2001:4860:4860::8844]
Error: unknown command "/var/run/docker/netns/582bd184e561" for "some_app"
Run 'some_app --help' for usage.
ERRO[3808] Resolver Setup/Start failed for container 6b81802576bd4f16aa117061f81b5c3e, "setup not done yet"
ERRO[3808] failed to add interface vethef0a693 to sandbox: failed in prefunc: failed to set namespace on link "vethef0a693": invalid argument
ERRO[3808] failed to add interface vethef0a693 to sandbox: failed in prefunc: failed to set namespace on link "vethef0a693": invalid argument
I was wondering if anyone could help me make sense of this and perhaps prevent it. Are these two separate errors?
Thank you
Here is the library I am trying to use
It took me a while to figure this out, but here goes:
Just like in Docker, libnetwork creates a veth interface pair. It then moves one end of the veth pair into the container namespace. During this process libnetwork tries to execute commands registered at runtime on the current instance of the binary (some_app in this case).
These commands do not exist on the external interface of some_app however. They are injected later using a library called reexec. For this to work, reexec needs to be initialized like this:
if reexec.Init() {
return
}
Also note that according to this thread libnetwork is currently not supported for applications outside of Docker.
NB: I discovered this by reading the source code, so I might be wrong but my issue went away after this.