Hi I have installed Kamalio it start first time but when I stop and start it again it gives sctp_core_destroy(): SCTP API not initialized . I have already installed sctp module.
yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg
load_module(): could not find module <db_mysql> in </usr/lib/kamailio/modules>
[sctp_core.c:53]: sctp_core_destroy(): SCTP API not initialized
From the log it is obvious that you have successfully compiled & installed SCTP module, however it could NOT be initialized.
Note that is error could must often than not be as a result of other errors in your cfg file.
Few tips:
Can you run kamailio -c and to be sure there is NO error in your cfg.
Found error? use this command to monitor what the exact issue is. Run from a different terminal tail -fn200 /var/log/syslog
On the second terminal try restarting you Kamalio server sudo service kamalio restart
Revisit terminal 1 and look out for the first line with CRITICAL output like the one below CRITICAL: <core> [core/cfg.y:3413]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 366, column 41: syntax error
Line 366 mostly is the issue so visit that file at that line (366) to fix the proble
sudo nano +366 /usr/local/etc/kamailio/kamailio.cfg
Let me know if it helps
Related
I am using terraform on my Mac system, and terraform apply results with below error
Error: command "bash" failed with no error message
on ssm.tf line 7, in data "external" "ssm-dynamic-general":
7: data "external" "ssm-dynamic-general" {
However there is nothing wrong in ssm.tf file, same runs perfectly fine in my another system.
Can some one please let me know what i am missing here?
You might have done what I accidentally did: not follow the external program protocol:
https://www.terraform.io/docs/providers/external/data_source.html#external-program-protocol
In my particular case, I failed to send the errors that were coming from my program to standard error. Instead, those errors were going to standard out.
That's why Terraform wasn't able to report on those errors.
So if you send any and all errors from your program to standard error using > &2, you should be able to see those errors when you run terraform plan.
Started working on an update to my website. It was working fine the other day but now I get an error.
I generally type on CMD (i'm on Windows 10) "bundle exec Jekyll serve --watch" and the server goes. I can edit and save and its all reflected in browser upon refresh.
Now I can do this, but if I make one change to any file it works. Do another change and I get an error. I have to terminate and type again.
Below is the error:
D:\Tristen Grant\Documents\GitHub\portfolio>bundle exec jekyll serve --watch
DL is deprecated, please use Fiddle
Configuration file: D:/Tristen Grant/Documents/GitHub/portfolio/_config.yml
Source: D:/Tristen Grant/Documents/GitHub/portfolio
Destination: D:/Tristen Grant/Documents/GitHub/portfolio/_site
Incremental build: disabled. Enable with --incremental
Generating...
done in 0.595 seconds.
Auto-regeneration: enabled for 'D:/Tristen Grant/Documents/GitHub/portfolio'
Configuration file: D:/Tristen Grant/Documents/GitHub/portfolio/_config.yml
Server address: http://127.0.0.1:3000//
Server running... press ctrl-c to stop.
Regenerating: 1 file(s) changed at 2016-09-06 16:16:28 ...done in 0.521498 seconds.
Regenerating: 1 file(s) changed at 2016-09-06 16:16:30 ...error:
Error: No such file or directory - git rev-parse HEAD
Error: Run jekyll build --trace for more information.
[2016-09-06 16:19:35] ERROR Errno::ENOTSOCK: An operation was attempted on something that is not a socket.
C:/Ruby21-x64/lib/ruby/2.1.0/webrick/server.rb:170:in `select'
Terminate batch job (Y/N)? y
Terminate batch job (Y/N)? y
I'm using Ruby 2.1.5 64 bit version. RubyDevKit, Sass, Bourbon.
Any ideas how to fix this? I don't know much about Jekyll or ruby. Just starting out.
I also get this error in CMD. You should have github's desktop app installed; try running the same commands from the GitShell you get with that app.
For me that works, it saves me the trouble of installing git globally on Windows and setting it up.
I tried running grunt to run a MEAN web app and received an ILLEGAL TOKEN in lodash.js, a file which has ~4000 lines. I went to debug the error on line 2220 and received a different syntax error on line 2238, but the VIM editor in Digital Ocean says that the file is only 2228 lines, and even using 'G' to get to the end of the file takes me to 2228. How do I access the rest of the file to debug when the editor thinks that the file is only 2228 lines?
Bug was related to some dependencies not being resolved in npm install. Issue resolved by increasing RAM of droplet.
I'm trying to get my meteor app up and running, but I don't understand the error that its throwing at all, which is:
/Users/ten3/.meteor/packages/meteor- tool/.1.1.10.1b51q9m++os.osx.x86_64+web.browser+web.cordova/mt-os.osx.x86_64/dev_bundle/lib/node_modules/fibers/future.js:278
throw(ex);
^
Error: EACCES, unlink '/Users/ten3/Desktop/git/ten/website/prospect-recovery/prospect-recovery/.meteor/local/db/mongod.lock'
at Object.Future.wait (/Users/ten3/.meteor/packages/meteor-tool/.1.1.10.1b51q9m++os.osx.x86_64+web.browser+web.cordova/mt-os.osx.x86_64/dev_bundle/lib/node_modules/fibers/future.js:398:15)
at /tools/fs/files.js:1331:28
at Object.wrapper [as unlink] (/tools/fs/files.js:1334:20)
at findMongoAndKillItDead (/tools/runners/run-mongo.js:318:11)
at launchOneMongoAndWaitForReadyForInitiate (/tools/runners/run-mongo.js:400:7)
at launchMongo (/tools/runners/run-mongo.js:656:7)
at [object Object]._.extend._startOrRestart (/tools/runners/run-mongo.js:756:19)
at [object Object]._.extend.start (/tools/runners/run-mongo.js:714:10)
at /tools/runners/run-all.js:168:26
- - - - -
I'm running a shell script before I try to run a local copy of my meteor app. It supposed to stop my application from interacting with other APIs. When I run the script (I'm on a mac) through my terminal, it returns '0' which as I read means that there are zero errors. I know that the error message is guiding me to certain lines of code, but I don't understand why I would change them if my co-worker could get his copy up and running. He is running his application on a windows computer. Thank you. I'm pretty new to this.
It was a permission error just as #thatgibbyguy first suggested. I was able to run it buy using sudo meteor to override the permission restrictions. I wasn't about to remove my mongod.lock file since that my coworker had the file and was able to get it up and running.
I'm trying to use chef to check out a git repo to a windows client node.
This seems simple enough and I've got the following resource definition:
git "C:\\pathtocheckout" do
repo "https://gitserver/repo.git"
action [ :checkout, :sync]
end
But when this is reached by chef-client I get:
Errno::EIO: git[C:\pathtocheckout] (cookbook_name::test line 21) had an error: Errno::EIO: Input/output error - CreateProcessW
I've had a look at the stacktrace produced and it appears to be something to do with creating a process to run the git command - but this is the limit of my knowledge.
I've made sure git is installed on on Path, removed all other recipes from the run list, running as a different admin user and I've tried different repositories but all with the same error.
So I'm pretty stumped - anyone got a way I can dig into this error and see what is going on?