I am connecting to Redis from the spring boot app on the outside machine where the Redis server docker container is not running. When the app tries to connect to Redis, the app can't connect properly until the sent request is timed out. Meanwhile, if I try to connect from:
Inside the machine where the Redis server docker container is running with the host is localhost, I could connect it. And, I don't know why I can't connect by setup host value as a numerical IP/alphabetical (URL), only works with "localhost."
Outside machine where the Redis server docker container is not running with Redis client app GUI for management, I could connect it.
application.properties:
spring.redis.host=pc-1
spring.redis.port=6379
pc-1 is alias from some numerical ip. I'am using hosts feature from
windows to aliasing/redirecting it.
.env:
REDIS_PORT=6379
docker-compose.yml:
redis:
image: redis:latest
ports:
- "${REDIS_PORT}:6379"
command:
# - redis-server
# - --requirepass "${REDIS_PASSWORD}"
networks:
- redis
healthcheck:
test: ["CMD-SHELL", "redis-cli ping"]
interval: 10s
timeout: 10s
retries: 3
I need help on this issue.
Use the --service-ports flag to the docker compose command to publish the ports you've defined in the docker compose file.
Other debugging tips:
Hardcode the ${REDIS_PORT} variable in case the value is not getting set or set a default like ${REDIS_PORT:-default}
Pass the env file explicitly like docker compose --env-file ./somedir/.env up in case the env file is not being pick up
Use docker inspect to get container status, check the networking info
Related
I have a problem here that I really cannot understand. I already saw few topics here with the same problem and those topics was successfully solved. I basically did the same thing and cannot understand what I'm doing wrong.
I have a Spring application container that tries to connect to a Mongo container through the following Docker Composer:
version: '3'
services:
app:
build: .
ports:
- "8080:8080"
links:
- db
db:
image: mongo
volumes:
- ./database:/data
ports:
- "27017:27017"
In my application.properties:
spring.data.mongodb.uri=mongodb://db:27017/app
Finally, my Dockerfile:
FROM eclipse-temurin:11-jre-alpine
WORKDIR /home/java
RUN mkdir /home/java/bar
COPY ./build/libs/foo.jar /home/java/bar/foo.jar
CMD ["java","-jar", "/home/java/bar/foo.jar"]
When I run docker compose up --build I got:
2022-11-17 12:08:53.452 INFO 1 --- [null'}-db:27017] org.mongodb.driver.cluster : Exception in monitor thread while connecting to server db:27017
Caused by: java.net.UnknownHostException: db
Running the docker compose ps I can see the mongo container running well, and I am able to connect to it through Mongo Compass and with this same Spring Application but outside of container. The difference running outside of container is the host from spring.data.mongodb.uri=mongodb://db:27017/app to spring.data.mongodb.uri=mongodb://localhost:27017/app.
Also, I already tried to change the host for localhost inside of the spring container and didnt work.
You need to specify MongoDB host, port and database as different parameters as mentioned here.
spring.data.mongodb.host=db
spring.data.mongodb.port=27017
spring.data.mongodb.authentication-database=admin
As per the official docker-compose documentation the above docker-compose file should worked since both db and app are in the same network (You can check if they are in different networks just in case)
If the networking is not working, as a workaround, instead of using localhost inside the spring container, use the server's IP, i.e, mongodb://<server_ip>:27017/app (And make sure there is no firewall blocking it)
I'm pretty new to docker, and I've tried searching about networking but haven't found a solution that's worked.
I have a Laravel app that is using Laradock.
I also have an external 3rd party API that runs in its own docker container.
I basically want to specify the container name of the api inside my laravel .env file, and have it dynamically resolve the container ip so I can make API calls from my Laravel app. I can already do this with services that are already part of laradock like mariadb/mysql, but since my API is located in an external container, it can't connect to it.
I tried making a network and attaching them with;
docker network create my-network
Then inside my docker-compose.yml files for each of the containers, I specified;
networks:
my-network:
name: "my-network"
But if I try and ping them with;
docker exec -ti laradock-workspace-1 ping my-api
I can't connect and can't really figure out why. Was hoping someone familiar with docker might be able to explain why since I'm sure it's something very obvious I'm missing. Thanks!
By default Docker Compose uses a bridge network to provision inter-container communication. Read this article for more info about inter-container networking.
What matters for you, is that by default Docker Compose creates a hostname that equals the service name in the docker-compose.yml file.
Consider the following docker-compose.yml:
version: '3.9'
services:
server:
image: node:16.9.0
container_name: server
tty: true
stdin_open: true
depends_on:
- mongo
command: bash
mongo:
image: mongo
environment:
MONGO_INITDB_DATABASE: my-database
When you run docker-compose up, Docker will create a default network and assigns the service name as hostname for both mongo and server.
You can now access the backend container via:
docker exec -it server bash
And now you can ping the mongo container using Dockers internal network (default on port 27017 in this case):
curl -v http://mongo:27017/my-database
That's it. The same applies for your setup.
This question already has answers here:
From inside of a Docker container, how do I connect to the localhost of the machine?
(40 answers)
Closed 1 year ago.
I'm new to Docker. I'm build a Spring Boot Application deploying on Docker.
Here is my example docker-compose.yml:
version: "3"
services:
user:
container_name: user
image: user-service
build:
context: user-api/
ports:
- "3001:8000"
restart: always
volumes:
- /home/ubuntu/logs/user_service:/opt/app/logs
networks:
- api_network
cms:
container_name: cms
image:cms-service
build:
context: cms-service/
ports:
- "3003:8000"
restart: always
volumes:
- /home/ubuntu/logs/cms_service:/opt/app/logs
networks:
- api_network
networks:
api_network:
driver: bridge
In the server machine, there's a Redis Server running on Ubuntu. I cannot connect the the Redis Server from Docker container to the host machine.
Here is my redis config inside application.properties
spring.redis.host=localhost
spring.redis.port=6379
spring.redis.password=Password123!##
I also tried to change the localhost to
127.0.0.1
172.17.0.1
0.0.0.0
host
host.docker.internal
That's I've found on the internet. But nothing works. Do I need to specifically config anything to allow my Spring Boot Service inside Docker connect to Redis that's running on localhost.
The issue is probably due to the fact your Redis is bound to the address 127.0.0.1 (which is the default configuration) and your containers are not running on the network host.
To solve this, you should reconfigure Redis to bind to both 127.0.0.1 as well as to the IP address of the host as seen from api_network (sudo ip addr show on the host): the easiest thing to do here, if your scenario allows that, is to just bind Redis to 0.0.0.0 (via redis.conf).
As an alternative, you may also want to run your containers on the host network instead of using the api_network bridge: this appears to be overkill according to your issue, by the way, and may lead to security issues and exposed network ports.
I have created a spring app and i want to connect it to redis server which is deployed on docker-compose i put the needed properties as follow :
spring.redis.host=redis
spring.redis.port=6379
But i keep getting a ConnexionException so how can i Know on which host redis is running and how to connect to it.
Here is my docker-compose file :
version: '2'
services:
redis:
image: 'bitnami/redis:5.0'
environment:
# ALLOW_EMPTY_PASSWORD is recommended only for development.
- ALLOW_EMPTY_PASSWORD=yes
- REDIS_DISABLE_COMMANDS=FLUSHDB,FLUSHALL
ports:
- '6379:6379'
volumes:
- 'redis_data:/bitnami/redis/data'
volumes:
redis_data:
driver: local
From docker compose documentation
By default Compose sets up a single network for your app. Each container for a service joins the default network and is both reachable by other containers on that network, and discoverable by them at a hostname identical to the container name
If you want to access redis by container name ('redis' in this case), the Spring boot application has also be deployed as a docker compose service, but it doesn't appear in the docker-compose file that you've provided in the question, so please add it.
Alternatively If you're trying to run the spring boot application on host machine, use 'localhost' instead of 'redis' in order to access the redis container.
Another approach you can use is "docker network" , Below are the steps to follow :
Create a docker network for redis
docker network create redis-docker
Spin up redis container is redis-docker network.
docker run -d --net redis-docker --name redis-stack -p 6379:6379 -p 8001:8001 redis/redis-stack:latest
Inspect the redis-docker container
docker network inspect redis-docker
Copy the "IPv4Address" IP and paster in application.yml
Now build , start your application.
TL;DR: How do I have to change my below docker-compose.yml in order to allow one container to use a service of another over a custom (non-standard) port?
I have a pretty common setup: containers for a web app (Padrino [Ruby]), Postgres, Redis, and a queueing framework (Sidekiq). The web app comes with its custom Dockerfile, the remaining services come either from standard images (Postgres, Redis), or mount the data from the web app (Sidekiq). They are ties together via the following docker-compose.yml:
version: '2'
services:
web:
build: .
command: 'bundle exec puma -C config/puma.rb'
volumes:
- .:/myapp
ports:
- "9000:3000"
depends_on:
- postgres
- redis
sidekiq:
build: .
command: 'bundle exec sidekiq -C config/sidekiq.yml -r ./config/boot.rb'
volumes:
- .:/myapp
depends_on:
- postgres
- redis
postgres:
image: postgres:9.5
environment:
POSTGRES_USER: my-postgres-user
POSTGRES_PASSWORD: my-postgres-pass
ports:
- '9001:5432'
volumes:
- 'postgres:/var/lib/postgresql/data'
redis:
image: redis
ports:
- '9002:6379'
volumes:
- 'redis:/var/lib/redis/data'
volumes:
redis:
postgres:
One key point to notice here is that I am exposing the containers services on non-standard ports (9000-9002).
If I start the setup with docker-compose up, the Redis and Postgres containers come up fine, but the containers for the web app and Sidekiq fail since they can't connect to Redis at redis:9002. Remarkably enough, the same setup works if I use 6379 (the standard Redis port) instead of 9002.
docker ps also looks fine afaik:
CONTAINER ID IMAGE COMMAND CREATED STATUS PORTS NAMES
9148566c2509 redis "docker-entrypoint.sh" Less than a second ago Up About a minute 0.0.0.0:9002->6379/tcp rubydockerpadrino_redis_1
e6d47321c939 postgres:9.5 "/docker-entrypoint.s" Less than a second ago Up About a minute 0.0.0.0:9001->5432/tcp rubydockerpadrino_postgres_1
What's even more confusing: I can access the Redis container from the host via redis-cli -h localhost -p 9002 -n 0, but the web app and Sidekiq containers fail to establish a connection.
I am using this docker version on MacOS:
Docker version 1.12.3, build 6b644ec, experimental
Any ideas what I am doing wrong? I'd appreciate any hint how to get my setup running.
When you bind ports like this '9002:6379' you're telling Docker to forward traffic from localhost:9002 -> redis:6379. That's why this works from your host machine:
redis-cli -h localhost -p 9002 -n 0
However, when containers talk to each other, they are all connected to the same network by default (the Docker bridge or docker0). By default, containers can communicate with each other freely on this network, without needing any ports opened. Within this network, your redis container is listening for traffic on it's usual port (6379), host isn't involved at all. That's why your container to container communication works on 6379.