I have a lot of experience as an Intellij developer where the enter key will always insert the first auto-complete suggestion. In visual studio with resharper however, the enter key will create a new line instead of inserting the first intellisense suggestion. Can anyone suggest a way to allow the enter key to replicate the Intellij behavior? I know pressing the tab key behaves as expected by my muscle memory keeps pressing enter without me thinking about it.
Can anyone suggest a way to allow the enter key to replicate the
Intellij behavior? I know pressing the tab key behaves as expected by
my muscle memory keeps pressing enter without me thinking about it.
In your side, you have installed Resharper, so you have two ways to use Intellisense: Visual Studio Intellisense which is the default way for Visual Studio, Resharper Intellisense.
1) If you use Visual Studio Intellisense(make sure you choose Visual Studio by the top menu ReSharper-->Options-->Environment-->Intellisense-->General) and face this issue, please try this:
choose Never add new line on enter by Tools-->Options-->Text Editor-->C#(please choose the corresponding development language)-->Intellisense-->Enter Key Behavior.
2) If you use Resharper Intellisense(make sure you choose Resharper by the top menu ReSharper-->Options-->Environment-->Intellisense-->General), you will not face this issue.
Note: if you face this issue in Resharper Intellisense, l think it is the issue about some changes in Resharper Option.You can try to reset Resharper settings by Resharper-->Manage Options-->Reset all settings.
Hope it could help you.
Just a quick update for the previously posted answer as I noticed the location has changed slightly as of now. I found this option (using Visual Studio Intellisense) under:
Tools menu > Text Editor > C/C++ (or whatever language you are using) > Advanced > IntelliSense section > set Member List Commit Aggressive to True.
I have a minor annoyance with Visual Studio. In the bottom right hand corner of Visual Studio, there is a INS/OVR button to toggle Insert/Overwrite. I always have this button set to INS, and I always want it to be set to INS.
However, sometimes when I build the solution, Visual Studio changes this back to OVR. I have to click on the button to change it back to INS, which is slightly inconvenient.
I do not know why this setting sometimes changes.
Is there anyway I can permanently disable the overwrite mode in Visual Studio or prevent solution builds from changing this setting?
Visual Studio, Tools > Options > Environment > Keyboard, remove the shortcut binding for Edit.OvertypeMode
I don't think you can permanently turn insert/overwrite off. Are you accidentally pressing insert on your keyboard? You can press the insert key on your keyboard or Shift+0 on the numpad to toggle it back again.
Go to Visual Studio Code's settings and type "overtype" in the search bar, and set it to 'never'.
Hope this helped! :)
Sometimes visual studio wont disable overtype even if you hit insert with numlock on, If this happens just close script and open it again and it will work. This is a bug in visual studio.
My watch and immediate window has stopped showing intellisense options automatically until I press Ctrl + Space.
I tried to search any option to enable it again, but couldn't find one.
I am using ReSharper with my Visual Studio 2010, is it something because of it, although I don't remember it stopped working after ReSharper or even before that.
Can anybody please help!
Its a known issue. If you enable resharper's intellisense then intellisense won't work in immediate window:
link
In Visual Studio 2010, sometimes within the same session (not having rebooted the app) intellisense gets turned off. The checkboxes in Tools > Options > Text Editory > C# > Statement Completion, "Auto List Members" and "Parameter Information" become unchecked.
I have Resharper installed as well. But Resharper does not control that setting, as far as I know.
This can happen a couple times a day to me, all without restarting Visual Studio.
There is, apparently, a documented bug for Resharper: http://blogs.jetbrains.com/dotnet/2011/02/resharper-513-is-released/
Excerpt:
ReSharper 5.1.3 provides exactly one bug fix that prevents disabling Parameter
Information and auto-completion when you’re using native Visual Studio
IntelliSense (as opposed to ReSharper IntelliSense).
Please note that if you’re been using ReSharper IntelliSense as a workaround in
5.1.2, as soon as you switch back to Visual Studio IntelliSense, you’ll have to
initially set Auto-list members and Parameter information check boxes manually,
but that is only required once.
I've noticed this in ReSharper 7.1.1 as well, at least regarding javascript intellisense having the same problem. My workaround was to tell Reshaper to use 'Visual Studio' as its Intellisense option Resharper > Options > Intellisense > General. (you can still bring up Resharper's intellisense with Ctrl + Alt + Space)
Once I did that it kept my Visual Studio options checked for good.
This is driving me crazy. Ever since I installed ReSharper 4, F12 no longer seems to work. If you look at the all the ReSharper short cuts in the Goto sub menu Declaration doesn't have any assigned!
The only way I can go to declaration is by using Alt and ` and then selecting Declaration.
I have tried un-installing and re-installing ReSharper with no luck, I have also, in ReSharper option asked it to use the default Visual Studio Key Bindings but that doesn't to work either.
Interestingly, when I do use Alt and ` I actually get two entries for the Declaration option.
Has anyone come across this problem?
I am using Visual Studio 2005 SP1.
I ran into the same issue and resolved it by first resetting my Visual Studio keyboard mappings:
Tools > Options > Keyboard > Reset
Then going into the ReSharper options and applying the scheme:
Resharper > Options > Visual Studio Integration > Apply Scheme
Update:
For VS2017 onwards:
Tools > Options > Environment > Keyboard > Reset
For Resharper 2017.2:
Resharper > Options > Environment > Keyboard & Menus > Keyboard Shortcuts > Apply Scheme
I have had a few occasions where Resharper and Visual Studio keybindings got mixed up and I had problems sorting them out.
If it is only one or two bindings you care about then you can change them by going to the
Tools->Customize->Keyboard menu option.
For ReSharper 8 and Visual Studio 2012:
Tools > Options > Keyboard > Reset
Then going into the ReSharper options and applying the scheme:
Resharper > Options > Environment > Keyboard & Menus > (Select Visual Studio under Keyboard Shortcuts) > Apply Scheme > Save
I had this problem and it was resolved by following the steps described in the picture:
Open Visual Studio Tabs on the path: Tools>>Options>>Keyboard
Open Visual Studio Tabs on the path: Resharper>>Options>>Keyboard & Menus and Do the following:
And Then Reopen the path above and do the following:
Finally, close the Visual Studio and open it.
I had this issue in VS2015 using Resharper 9.1.3, I tried Ryan's answer but it still didn't work.
After doing the steps Ryan outlined, I clicked F12 where Resharper asks What do you want to do?, I select Use Visual Studio commands. Still doesn't work.
Tools > Options > Keyboard > Select ReSharper.ReSharper_GotoNextHighlight from command list box
Change Shortcuts for selected command to F12 (Text Editor), click Remove and OK.
After this it works!
Try simple way to enable it, press Fn + Esc key of the keyboard.
It is possible that you have enabled Fn mode (Blue Keys) on your keyboard which overrides default behavior of functional keys including F12.
I had the same problem with VS2013 and Resharper 9. I have a code like this:
gridList.Method1();
gridList.Method2();
I then right-click on any of gridList and click Find Usages (or just use Shift+F12) but it says "Usages not found" even though it is just one line away! Sometimes VS restart would help, sometimes it wouldn't. It looks like clearing the cache of Reshaper helps though: Resharper -> Options -> Environment -> General -> Clear Caches. This needs VS to be restarted, but then it started working as expected.
My problem was that I couldn't use the command "Alt + F12" when trying to "peek definition" in Visual Studio. I found out through another forum-thread that it was Nvidia's GeForce Experience that overrides some of the "Alt" shortcuts and uses them for their functionalities with screen recordings etc.
What solved it for me, was going into the GeForce Experience settings and switch off the use of in-game overlay:
Alternatively, if you want to use the overlay, you can just change the short cut commands.
For ReSharper Ultimate 2017.3.3 and Visual Studio 2017:
Tools > Options > Tools > External Sources > Default Visual Studio Navigation > Save
I ran into this problem after an organizational change that caused my windows profile to change. I tried the solutions listed above, but nothing seemed to work.
Here is how I fixed it (brute force worked!)
NOTE: Steps listed are for VS 2012 and ReSharper 7.1.3
Uninstalled Re-Sharper
Exit visual studio, ensure the process devenv.exe is no longer there in the running processes (was there in my case and I had to do a "End Process Tree" from Task Manager)
Fired up VS 2012, and from the menu Tools -> Options -> Environment -> Keyboard selected Visual C# 2005 (or any other setting you love) and pressed Reset
Shutdown VS again (and ensure devenv.exe has been killed in Task manager)
Re-installed re-sharper
Best of luck!
These steps solved it for me:
Uninstall keyboard in Device Manager
Re-insert your keyboard usb
"Web Essentials"
Add or update visual studio "Web Essentials" You can find it at:
Menu>>Tools>>Extensions and Updates
I hope this will save your time. It worked for me.
ReSharper added a crap 'good' new thing that they now call a feature: Smart Go To Declaration. As dumb as it may sound, it comes enabled by default: crap 'good'.
The feature is described on the link provided from here but honestly at least it should've keep it disabled, not reinvent the wheel. It also tells you how to disable that crap 'good' feature.
Sometimes it has noting to do with Visual Studio at all. Be sure your keyboard has its function key setting of the keyboard itself to send the F12 function to Visual Studio. It is an easy thing to miss.
I had just installed Pulover’s Macro Creator and F12 was set as the global hotkey to pause a macro. It was intercepting the keypress before it had a chance to get to VS.
Solution is to change that hotkey to something else. I chose Ctrl-F12. The input box is on the top right of the Pulover window.
Update 2020. I had the same problem and also tried a lot of ways, but that was still didn't working... [VS 2015, ReSharper 2019.3.1]
But, like Andrius said:
Resharper -> Options -> Environment -> General -> Clear Caches. This needs VS to be restarted, but then it started working as expected.
Summary is: (try steps above) + Resharper..-> Clear Caches + VS restart. Hope this will be useful