I am new to the Epicor DBM role and ran into this issue today.
When looking into this, I noticed that recycling the app pool is one solution. Since we are a large production facility, that is a last resort. It will boot everyone out of Epicor, and halt production for a few minutes. We usually reboot every Sunday to avoid any down time. I also noticed another solution in the Epicor Admin Console about recycling there and could not find it. Has anyone else had this issue, and how did you resolve it?
The requested service, 'net.tcp://epicorapp02/EpicorERP/Erp/BO/TransOrderReceipt.svc' could not be activated. See the server's diagnostic trace logs for more information.
Application Error
Exception caught in: mscorlib
Error Detail
============
Message: The requested service, 'net.tcp://epicorapp02/EpicorERP/Erp/BO/TransOrderReceipt.svc' could not be activated. See the server's diagnostic trace logs for more information.
Program: CommonLanguageRuntimeLibrary
Method: HandleReturnMessage
Client Stack Trace
==================
Server stack trace:
at System.ServiceModel.Channels.ConnectionUpgradeHelper.DecodeFramingFault(ClientFramingDecoder decoder, IConnection connection, Uri via, String contentType, TimeoutHelper& timeoutHelper)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.SendPreamble(IConnection connection, ArraySegment`1 preamble, TimeoutHelper& timeoutHelper)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.DuplexConnectionPoolHelper.AcceptPooledConnection(IConnection connection, TimeoutHelper& timeoutHelper)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.ClientSecurityChannel`1.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open()
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open()
at Epicor.ServiceModel.Channels.ChannelEntry`1.CreateNewChannel()
at Epicor.ServiceModel.Channels.ChannelEntry`1.CreateChannel()
at Epicor.ServiceModel.Channels.ChannelEntry`1.GetContract()
at Epicor.ServiceModel.Channels.ImplBase`1.GetChannel()
at Epicor.ServiceModel.Channels.ImplBase`1.HandleContractBeforeCall()
at Erp.Proxy.BO.TransOrderReceiptImpl.GetByID(Int32 packNum)
at Erp.Adapters.TransOrderReceiptAdapter.OnGetByID(Int32 ID)
at Ice.Lib.Framework.EpiBaseAdapter.GetByID(Int32 intId)
at Erp.UI.App.TransOrderReceipt.Transaction.GetByPackingSlip(String packingSlip)
at Erp.UI.App.TransOrderReceipt.Transaction.OnGetByID(String id)
at Erp.UI.App.TransOrderReceipt.Transaction.OnValidateKeyField(Control tb)
at Erp.UI.App.TransOrderReceipt.TransOrderReceiptForm.keyFieldValidating(Object sender, CancelEventArgs e)
at System.ComponentModel.CancelEventHandler.Invoke(Object sender, CancelEventArgs e)
at System.Windows.Forms.Control.OnValidating(CancelEventArgs e)
at Infragistics.Win.UltraWinEditors.UltraNumericEditorBase.OnValidating(CancelEventArgs e)
at Ice.Lib.Framework.EpiNumericEditor.OnValidating(CancelEventArgs e)
at System.Windows.Forms.Control.NotifyValidating()
at System.Windows.Forms.Control.PerformControlValidation(Boolean bulkValidation)
at System.Windows.Forms.ContainerControl.ValidateThroughAncestor(Control ancestorControl, Boolean preventFocusChangeOnError)
at System.Windows.Forms.ContainerControl.EnterValidation(Control enterControl)
at System.Windows.Forms.ContainerControl.UpdateFocusedControl()
at System.Windows.Forms.ContainerControl.AssignActiveControlInternal(Control value)
at System.Windows.Forms.ContainerControl.ActivateControlInternal(Control control, Boolean originator)
at System.Windows.Forms.ContainerControl.SetActiveControlInternal(Control value)
at System.Windows.Forms.ContainerControl.set_ActiveControl(Control value)
at System.Windows.Forms.Control.Select(Boolean directed, Boolean forward)
at System.Windows.Forms.ContainerControl.ProcessTabKey(Boolean forward)
at System.Windows.Forms.ContainerControl.ProcessDialogKey(Keys keyData)
at System.Windows.Forms.Control.ProcessDialogKey(Keys keyData)
at System.Windows.Forms.Control.ProcessDialogKey(Keys keyData)
at System.Windows.Forms.Control.PreProcessMessage(Message& msg)
at System.Windows.Forms.Control.PreProcessControlMessageInternal(Control target, Message& msg)
at System.Windows.Forms.Application.ThreadContext.PreTranslateMessage(MSG& msg)
-----------------
The requested service, 'net.tcp://epicorapp02/EpicorERP/Erp/BO/NonConf.svc' could not be activated. See the server's diagnostic trace logs for more information.
Application Error
Exception caught in: mscorlib
Error Detail
============
Message: The requested service, 'net.tcp://epicorapp02/EpicorERP/Erp/BO/NonConf.svc' could not be activated. See the server's diagnostic trace logs for more information.
Program: CommonLanguageRuntimeLibrary
Method: HandleReturnMessage
Client Stack Trace
==================
Server stack trace:
at System.ServiceModel.Channels.ConnectionUpgradeHelper.DecodeFramingFault(ClientFramingDecoder decoder, IConnection connection, Uri via, String contentType, TimeoutHelper& timeoutHelper)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.SendPreamble(IConnection connection, ArraySegment`1 preamble, TimeoutHelper& timeoutHelper)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.DuplexConnectionPoolHelper.AcceptPooledConnection(IConnection connection, TimeoutHelper& timeoutHelper)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.ClientSecurityChannel`1.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open()
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at System.ServiceModel.ICommunicationObject.Open()
at Epicor.ServiceModel.Channels.ChannelEntry`1.CreateNewChannel()
at Epicor.ServiceModel.Channels.ChannelEntry`1.CreateChannel()
at Epicor.ServiceModel.Channels.ChannelEntry`1.GetContract()
at Epicor.ServiceModel.Channels.ImplBase`1.GetChannel()
at Epicor.ServiceModel.Channels.ImplBase`1.HandleContractBeforeCall()
at Erp.Proxy.BO.NonConfImpl.GetAvailTranDocTypes(String& listAvailTranDocTypes)
at Erp.Adapters.NonConfAdapter.GetAvailTranDocTypes(String& listAvailTranDocTypes)
Related
I am attempting to create a .Net 5 web application from scratch using an empty template. I would like the application to run on IIS Express and on Kestrel. But every time I run the application using CLI I end up getting the following error.
Microsoft.AspNetCore.Server.Kestrel[0]
Overriding address(es) 'http://localhost:5000'. Binding to endpoints defined in UseKestrel() instead.
crit: Microsoft.AspNetCore.Server.Kestrel[0]
Unable to start Kestrel.
System.IO.IOException: Failed to bind to address https://127.0.0.1:5001: address already in use.
---> Microsoft.AspNetCore.Connections.AddressInUseException: Only one usage of each socket address (protocol/network address/port) is normally permitted.
---> System.Net.Sockets.SocketException (10048): Only one usage of each socket address (protocol/network address/port) is normally permitted.
at System.Net.Sockets.Socket.UpdateStatusAfterSocketErrorAndThrowException(SocketError error, String callerName)
at System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Bind(EndPoint localEP)
at Microsoft.AspNetCore.Server.Kestrel.Transport.Sockets.SocketConnectionListener.<Bind>g__BindSocket|13_0(<>c__DisplayClass13_0& )
--- End of inner exception stack trace ---
at Microsoft.AspNetCore.Server.Kestrel.Transport.Sockets.SocketConnectionListener.<Bind>g__BindSocket|13_0(<>c__DisplayClass13_0& )
at Microsoft.AspNetCore.Server.Kestrel.Transport.Sockets.SocketConnectionListener.Bind()
at Microsoft.AspNetCore.Server.Kestrel.Transport.Sockets.SocketTransportFactory.BindAsync(EndPoint endpoint, CancellationToken cancellationToken)
at Microsoft.AspNetCore.Server.Kestrel.Core.Internal.Infrastructure.TransportManager.BindAsync(EndPoint endPoint, ConnectionDelegate connectionDelegate, EndpointConfig endpointConfig)
at Microsoft.AspNetCore.Server.Kestrel.Core.KestrelServerImpl.<>c__DisplayClass29_0`1.<<StartAsync>g__OnBind|0>d.MoveNext()
--- End of stack trace from previous location ---
at Microsoft.AspNetCore.Server.Kestrel.Core.Internal.AddressBinder.BindEndpointAsync(ListenOptions endpoint, AddressBindContext context)
--- End of inner exception stack trace ---
at Microsoft.AspNetCore.Server.Kestrel.Core.Internal.AddressBinder.BindEndpointAsync(ListenOptions endpoint, AddressBindContext context)
at Microsoft.AspNetCore.Server.Kestrel.Core.LocalhostListenOptions.BindAsync(AddressBindContext context)
at Microsoft.AspNetCore.Server.Kestrel.Core.Internal.AddressBinder.EndpointsStrategy.BindAsync(AddressBindContext context)
at Microsoft.AspNetCore.Server.Kestrel.Core.Internal.AddressBinder.BindAsync(IEnumerable`1 listenOptions, AddressBindContext context)
at Microsoft.AspNetCore.Server.Kestrel.Core.KestrelServerImpl.BindAsync(CancellationToken cancellationToken)
at Microsoft.AspNetCore.Server.Kestrel.Core.KestrelServerImpl.StartAsync[TContext](IHttpApplication`1 application, CancellationToken cancellationToken)
Unhandled exception. System.IO.IOException: Failed to bind to address https://127.0.0.1:5001: address already in use.
---> Microsoft.AspNetCore.Connections.AddressInUseException: Only one usage of each socket address (protocol/network address/port) is normally permitted.
---> System.Net.Sockets.SocketException (10048): Only one usage of each socket address (protocol/network address/port) is normally permitted.
at System.Net.Sockets.Socket.UpdateStatusAfterSocketErrorAndThrowException(SocketError error, String callerName)
at System.Net.Sockets.Socket.DoBind(EndPoint endPointSnapshot, SocketAddress socketAddress)
at System.Net.Sockets.Socket.Bind(EndPoint localEP)
at Microsoft.AspNetCore.Server.Kestrel.Transport.Sockets.SocketConnectionListener.<Bind>g__BindSocket|13_0(<>c__DisplayClass13_0& )
--- End of inner exception stack trace ---
at Microsoft.AspNetCore.Server.Kestrel.Transport.Sockets.SocketConnectionListener.<Bind>g__BindSocket|13_0(<>c__DisplayClass13_0& )
at Microsoft.AspNetCore.Server.Kestrel.Transport.Sockets.SocketConnectionListener.Bind()
at Microsoft.AspNetCore.Server.Kestrel.Transport.Sockets.SocketTransportFactory.BindAsync(EndPoint endpoint, CancellationToken cancellationToken)
at Microsoft.AspNetCore.Server.Kestrel.Core.Internal.Infrastructure.TransportManager.BindAsync(EndPoint endPoint, ConnectionDelegate connectionDelegate, EndpointConfig endpointConfig)
at Microsoft.AspNetCore.Server.Kestrel.Core.KestrelServerImpl.<>c__DisplayClass29_0`1.<<StartAsync>g__OnBind|0>d.MoveNext()
--- End of stack trace from previous location ---
at Microsoft.AspNetCore.Server.Kestrel.Core.Internal.AddressBinder.BindEndpointAsync(ListenOptions endpoint, AddressBindContext context)
--- End of inner exception stack trace ---
at Microsoft.AspNetCore.Server.Kestrel.Core.Internal.AddressBinder.BindEndpointAsync(ListenOptions endpoint, AddressBindContext context)
at Microsoft.AspNetCore.Server.Kestrel.Core.LocalhostListenOptions.BindAsync(AddressBindContext context)
at Microsoft.AspNetCore.Server.Kestrel.Core.Internal.AddressBinder.EndpointsStrategy.BindAsync(AddressBindContext context)
at Microsoft.AspNetCore.Server.Kestrel.Core.Internal.AddressBinder.BindAsync(IEnumerable`1 listenOptions, AddressBindContext context)
at Microsoft.AspNetCore.Server.Kestrel.Core.KestrelServerImpl.BindAsync(CancellationToken cancellationToken)
at Microsoft.AspNetCore.Server.Kestrel.Core.KestrelServerImpl.StartAsync[TContext](IHttpApplication`1 application, CancellationToken cancellationToken)
at Microsoft.AspNetCore.Hosting.GenericWebHostService.StartAsync(CancellationToken cancellationToken)
at Microsoft.Extensions.Hosting.Internal.Host.StartAsync(CancellationToken cancellationToken)
at Microsoft.Extensions.Hosting.HostingAbstractionsHostExtensions.RunAsync(IHost host, CancellationToken token)
at Microsoft.Extensions.Hosting.HostingAbstractionsHostExtensions.RunAsync(IHost host, CancellationToken token)
at Microsoft.Extensions.Hosting.HostingAbstractionsHostExtensions.Run(IHost host)
at EmployeeManagement.Program.Main(String[] args) in D:\projects\EmployeeManagement\EmployeeManagement\Program.cs:line 16
D:\projects\EmployeeManagement\EmployeeManagement\bin\Debug\net5.0\EmployeeManagement.exe (process 16672) exited with code 0.
Failed to bind to address https://127.0.0.1:5001: address already in use.
It's true, change the port!
Somethings using it - and it's probably you! This happens to me all the time after running test in development then switching to a published build. Some client connections still lingering around from development I presume.
On Windows you can issue the following command to see whats listening on the port.
netstat -a -n -o | find "5001"
Match the PID of the listener to the process listed in the task manager.
I got Visual Studio 2017 community and Team foundation server 2017 installed on my local PC. Every thing went well but I cannot create the first project.
--begin Exception entry---
Time: 2017-04-22T21:25:57
Module: Engine
Event Description: TF30162: Task "BuildTask" from Group "Build" failed
Exception Type: Microsoft.TeamFoundation.Client.PcwException
Exception Message: TF400898: An Internal Error Occurred. Activity Id: f0024553-93bb-4320-812f-e12aa9e0f70a.
Exception Details:
Stack Trace:
at Microsoft.VisualStudio.TeamFoundation.Build.ProjectComponentCreator.ExecuteInternal(ProjectCreationContext context, XmlNode taskXml, Boolean validationOnly)
at Microsoft.VisualStudio.TeamFoundation.Build.ProjectComponentCreator.Execute(ProjectCreationContext context, XmlNode taskXml)
at Microsoft.VisualStudio.TeamFoundation.PCW.ProjectCreationEngine.TaskExecutor.PerformTask(IProjectComponentCreator componentCreator, ProjectCreationContext context, XmlNode taskXml)
at Microsoft.VisualStudio.TeamFoundation.PCW.ProjectCreationEngine.RunTask(Object taskObj)
-- Inner Exception --
Exception Message: TF400898: An Internal Error Occurred. Activity Id: f0024553-93bb-4320-812f-e12aa9e0f70a. (type BuildServerException)
Exception Stack Trace: at Microsoft.TeamFoundation.Client.Channels.TfsHttpClientBase.HandleReply(TfsClientOperation operation, TfsMessage message, Object[]& outputs)
at Microsoft.TeamFoundation.Client.Channels.TfsHttpClientBase.Invoke(TfsClientOperation operation, Object[] parameters, TimeSpan timeout, Object[]& outputs)
at Microsoft.TeamFoundation.Build.Client.BuildWebService4.CreateTeamProjectComponents(Uri projectUri, IEnumerable`1 permissions)
at Microsoft.TeamFoundation.Build.Client.BuildServer.CreateTeamProjectComponents(Uri projectUri, IEnumerable`1 permissions)
at Microsoft.VisualStudio.TeamFoundation.Build.ProjectComponentCreator.ExecuteInternal(ProjectCreationContext context, XmlNode taskXml, Boolean validationOnly)
Inner Exception Details:
Exception Message: TF400898: An Internal Error Occurred. Activity Id: f0024553-93bb-4320-812f-e12aa9e0f70a. (type SoapException)SoapException Details: <detail xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" ExceptionMessage="The file exists.
" BaseExceptionName="System.IO.IOException" />
Exception Stack Trace:
and on event Log:
Detailed Message: TF30065: An unhandled exception occurred.
Web Request Details
Url: http://server:8888/tfs/HOANAM/Build/v4.0/BuildService.asmx [method: POST]
User Agent: Team Foundation (devenv.exe, 15.112.26410.0, Other, SKU:59)
Headers: not available
Path: /tfs/HOANAM/Build/v4.0/BuildService.asmx
Local Request: True
Host Address: fe80::d173:b6d1:9535:2177%13
User: SERVER\Administrator [authentication type: NTLM]
Exception Message: The file exists.
(type IOException)
Exception Stack Trace: at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Path.InternalGetTempFileName(Boolean checkHost)
at Microsoft.TeamFoundation.Build.Server.ProcessTemplate.UpdateCachedProcessParameters(IVssRequestContext requestContext, VersionSpec versionSpec)
at Microsoft.TeamFoundation.Build.Server.TeamFoundationBuildService.AddProcessTemplates(IVssRequestContext requestContext, IList`1 processTemplates)
at Microsoft.TeamFoundation.Build.Server.TeamFoundationBuildService.CreateBuiltInProcessTemplates(IVssRequestContext requestContext, String teamProjectUri, Boolean isUpgrade)
at Microsoft.TeamFoundation.Build.Server.TeamFoundationBuildService.CreateTeamProject(IVssRequestContext requestContext, String projectUri, IList`1 permissions)
at Microsoft.TeamFoundation.Build.Server.BuildWebService4.CreateTeamProjectComponents(String projectUri, List`1 permissions)
I can reach http://server:8888/tfs/HOANAM/Build/v4.0/BuildService.asmx, http://server:8888/tfs/ fine. Also, I tried to delete all files in C:\Users\Administrator\AppData\Local\Microsoft\Team Foundation
Seems that you have more than one instance of TFS installed on the machine, or databases left from another TFS instance. Cleaning these up should help.
When im doing a webdeploy at visual studio 2012 and select the option update database I get the following error at my server log:
User:
Client IP: xxxx
Content-Type: application/msdeploy
Version: 9.0.0.0
MSDeploy.VersionMin: 7.1.600.0
MSDeploy.VersionMax: 9.0.1631.0
MSDeploy.Method: Sync
MSDeploy.RequestId: 36abe7a7-87e3-4ffb-a46f-b5918da1e651
MSDeploy.RequestCulture: nl-NL
MSDeploy.RequestUICulture: en-US
ServerVersion: 9.0.1631.0
Skip: objectName="^configProtectedData$"
Provider: auto, Path:
A tracing deployment agent exception occurred that was propagated to the client. Request ID '36abe7a7-87e3-4ffb-a46f-b5918da1e651'. Request Timestamp: '1-10-2012 17:39:41'. Error Details:
System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> System.Runtime.Serialization.SerializationException: Member 'ClassName' was not found.
at System.Runtime.Serialization.SerializationInfo.GetElement(String name, Type& foundType)
at System.Runtime.Serialization.SerializationInfo.GetString(String name)
at System.Exception..ctor(SerializationInfo info, StreamingContext context)
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._SerializationInvoke(Object target, SignatureStruct& declaringTypeSig, SerializationInfo info, StreamingContext context)
at System.Runtime.Serialization.ObjectManager.CompleteISerializableObject(Object obj, SerializationInfo info, StreamingContext context)
at System.Runtime.Serialization.ObjectManager.FixupSpecialObject(ObjectHolder holder)
at System.Runtime.Serialization.ObjectManager.DoFixups()
at System.Runtime.Serialization.Formatters.Binary.ObjectReader.Deserialize(HeaderHandler handler, __BinaryParser serParser, Boolean fCheck, Boolean isCrossAppDomain, IMethodCallMessage methodCallMessage)
at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize(Stream serializationStream, HeaderHandler handler, Boolean fCheck, Boolean isCrossAppDomain, IMethodCallMessage methodCallMessage)
at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize(Stream serializationStream, HeaderHandler handler, Boolean fCheck, IMethodCallMessage methodCallMessage)
at Microsoft.Web.Deployment.Base64EncodingHelper.DeserializeHelper(BinaryFormatter formatter, Byte[] buffer)
at Microsoft.Web.Deployment.Base64EncodingHelper.Deserialize(String str, Exception& handledException)
at Microsoft.Web.Deployment.SerializationHelper.Deserialize(String str)
at Microsoft.Web.Deployment.SqlDacPacProvider.ProcessExeOutput()
at Microsoft.Web.Deployment.SqlDacPacProvider.RunExecutableAsync(String exeName, String arguments, Int32 waitInterval, Int32 retryAttempts)
at Microsoft.Web.Deployment.SqlDacPacProvider.Add(DeploymentObject source, Boolean whatIf)
at Microsoft.Web.Deployment.DeploymentObject.Add(DeploymentObject source, DeploymentSyncContext syncContext)
at Microsoft.Web.Deployment.DeploymentSyncContext.HandleAdd(DeploymentObject destObject, DeploymentObject sourceObject)
at Microsoft.Web.Deployment.DeploymentSyncContext.SyncChildren(DeploymentObject dest, DeploymentObject source)
at Microsoft.Web.Deployment.DeploymentSyncContext.SyncChildrenOrder(DeploymentObject dest, DeploymentObject source)
at Microsoft.Web.Deployment.DeploymentSyncContext.ProcessSync(DeploymentObject destinationObject, DeploymentObject sourceObject)
at Microsoft.Web.Deployment.DeploymentObject.SyncToInternal(DeploymentObject destObject, DeploymentSyncOptions syncOptions, PayloadTable payloadTable, ContentRootTable contentRootTable, Nullable`1 syncPassId)
at Microsoft.Web.Deployment.DeploymentAgent.HandleSync(DeploymentAgentAsyncData asyncData, Nullable`1 passId)
at Microsoft.Web.Deployment.DeploymentAgent.HandleRequestWorker(DeploymentAgentAsyncData asyncData)
at Microsoft.Web.Deployment.DeploymentAgent.HandleRequest(DeploymentAgentAsyncData asyncData)
What might be causing this issue?
The error Visual studio gives me is:
Error 2 Web deployment task failed. ((1-10-2012 18:54:34) An error occurred when the request was processed on the remote computer.)
(1-10-2012 18:54:34) An error occurred when the request was processed on the remote computer.
The server experienced an issue processing the request. Contact the server administrator for more information. 0 0 Database
--FIX--
For some reason my installation of Webdeploy 3 did not work well (tried reinstalling too) with ms authentication, created a sql auth connectionstring and it resolved the issue.
I am trying to create a basic SSRS report in Visual Studio 2010 with AX 2012.
I want to display basic CustTable data. When i link the dataset with the query CustTableSRS (a query in AOT), i get an error.
The error says,
A call to SSPI failed, see inner exception.
This doesnt happen if i do the same steps in AX 2009 with Visual Studio 2008.
On googling, i found that this has something to do with "misconfigured SPN".
SPN is Server Principal Name, a name given to a server instance in a Kerboros environment. But i am not able to set it right.
I am using AX2012 image running on Oracle VirtualBox.
Note: Sorry, not able to post screenshot since i am a newbie :)
Error log in Visual Studio
Error 3 The "GenerateRdlTask" task failed unexpectedly.
Microsoft.Dynamics.AX.Framework.Services.Client.UserSessionServiceException: A call to SSPI failed, see inner exception. ---> System.ServiceModel.Security.SecurityNegotiationException: A call to SSPI failed, see inner exception. ---> System.Security.Authentication.AuthenticationException: A call to SSPI failed, see inner exception. ---> System.ComponentModel.Win32Exception: The target principal name is incorrect
--- End of inner exception stack trace ---
at System.Net.Security.NegoState.StartSendAuthResetSignal(LazyAsyncResult lazyResult, Byte[] message, Exception exception)
at System.Net.Security.NegoState.StartSendBlob(Byte[] message, LazyAsyncResult lazyResult)
at System.Net.Security.NegoState.CheckCompletionBeforeNextSend(Byte[] message, LazyAsyncResult lazyResult)
at System.Net.Security.NegoState.ProcessReceivedBlob(Byte[] message, LazyAsyncResult lazyResult)
at System.Net.Security.NegoState.StartReceiveBlob(LazyAsyncResult lazyResult)
at System.Net.Security.NegoState.CheckCompletionBeforeNextReceive(LazyAsyncResult lazyResult)
at System.Net.Security.NegoState.StartSendBlob(Byte[] message, LazyAsyncResult lazyResult)
at System.Net.Security.NegoState.CheckCompletionBeforeNextSend(Byte[] message, LazyAsyncResult lazyResult)
at System.Net.Security.NegoState.ProcessReceivedBlob(Byte[] message, LazyAsyncResult lazyResult)
at System.Net.Security.NegoState.StartReceiveBlob(LazyAsyncResult lazyResult)
at System.Net.Security.NegoState.CheckCompletionBeforeNextReceive(LazyAsyncResult lazyResult)
at System.Net.Security.NegoState.StartSendBlob(Byte[] message, LazyAsyncResult lazyResult)
at System.Net.Security.NegoState.ProcessAuthentication(LazyAsyncResult lazyResult)
at System.Net.Security.NegotiateStream.AuthenticateAsClient(NetworkCredential credential, ChannelBinding binding, String targetName, ProtectionLevel requiredProtectionLevel, TokenImpersonationLevel allowedImpersonationLevel)
at System.Net.Security.NegotiateStream.AuthenticateAsClient(NetworkCredential credential, String targetName, ProtectionLevel requiredProtectionLevel, TokenImpersonationLevel allowedImpersonationLevel)
at System.ServiceModel.Channels.WindowsStreamSecurityUpgradeProvider.WindowsStreamSecurityUpgradeInitiator.OnInitiateUpgrade(Stream stream, SecurityMessageProperty& remoteSecurity)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.WindowsStreamSecurityUpgradeProvider.WindowsStreamSecurityUpgradeInitiator.OnInitiateUpgrade(Stream stream, SecurityMessageProperty& remoteSecurity)
at System.ServiceModel.Channels.StreamSecurityUpgradeInitiatorBase.InitiateUpgrade(Stream stream)
at System.ServiceModel.Channels.ConnectionUpgradeHelper.InitiateUpgrade(StreamUpgradeInitiator upgradeInitiator, IConnection& connection, ClientFramingDecoder decoder, IDefaultCommunicationTimeouts defaultTimeouts, TimeoutHelper& timeoutHelper)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.SendPreamble(IConnection connection, ArraySegment`1 preamble, TimeoutHelper& timeoutHelper)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.DuplexConnectionPoolHelper.AcceptPooledConnection(IConnection connection, TimeoutHelper& timeoutHelper)
at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOpenOnce.System.ServiceModel.Channels.ServiceChannel.ICallOnce.Call(ServiceChannel channel, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.Dynamics.AX.Framework.Services.Client.UserSessionService.IUserSessionService.GetUserSessionInfo(UserSessionServiceGetUserSessionInfoRequest request)
at Microsoft.Dynamics.AX.Framework.Services.Client.UserSessionClientInternal.<GetUserSessionInfo>b__0(IUserSessionService channel)
at Microsoft.Dynamics.AX.Framework.Services.Client.ServiceClientHelper.InvokeChannelOperation[TResult,TChannel](IServiceClient`1 client, Func`2 operationInvoker, Func`2 exceptionWrapper)
--- End of inner exception stack trace ---
at Microsoft.Dynamics.AX.Framework.Services.Client.ServiceClientHelper.InvokeChannelOperation[TResult,TChannel](IServiceClient`1 client, Func`2 operationInvoker, Func`2 exceptionWrapper)
at Microsoft.Dynamics.AX.Framework.Services.Client.UserSessionClientInternal.GetUserSessionInfo()
at Microsoft.Dynamics.AX.Framework.Services.Client.UserSessionClient.GetUserSessionInfo()
at Microsoft.Dynamics.AX.Framework.Reports.Shared.UserInformationProxy.GetUserSessionInfo()
at Microsoft.Dynamics.AX.Framework.Reports.Shared.UserInformationProxy.GetUserLanguage()
at Microsoft.Dynamics.AX.Framework.Reports.Shared.ReportParameterPromptStringResolver.Resolve(Stream input, String language)
at Microsoft.Dynamics.Framework.Deployment.Reports.GenerateRdlTask.GetRDLForDesign(IReportDesignDefinition reportDesign, String[] assemblyReferences)
at Microsoft.Dynamics.Framework.Deployment.Reports.GenerateRdlTask.Execute()
at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()
at Microsoft.Build.BackEnd.TaskBuilder.ExecuteInstantiatedTask(ITaskExecutionHost taskExecutionHost, TaskLoggingContext taskLoggingContext, TaskHost taskHost, ItemBucket bucket, TaskExecutionMode howToExecuteTask, Boolean& taskResult) C:\Program Files (x86)\MSBuild\Microsoft\DynamicsTools\Microsoft.Dynamics.Framework.Design.Reporting.Modeling.targets 103 6 ReporDemoModel1
Try to do the same as Administrator, in order to see if same error arises. If Reporting is working properly, this is the first thing to try.
And for this type of developments, it's critical to have all CIL entirely compilated, and services (and service groups, there's one beginning by SRS and other by SAS) deployed. Check that the configuration client used by VS has properly configurated the services communications.
I have a Silverlight application, developed in VS2010 and deployed on Server 2008.
The application calls a WCF service within the project to read an mdf file, again within the application.
After getting through a number of what can only be called bugs within the VS deployement system (missing out the svc.cs file, placing the references in a folder the service can't see) I have managed to get it running.
The problem I'm having is that the service fails after a few seconds. Using WCF Storm I was able to run the service and get the following error information:
removed, see comments and below
has anyone any suggestions as to how to fix this? I'm getting to the end of my tether with WCF services!
Thanks in advance
Cap
Edit:
I have now activated errors in the web.config (thanks Upendra Chaudhari) and it has given the following error:
<GetDataTypes>
<MethodParameters>
<FaultException1>
<Detail>
<HelpLink isNull="true" />
<InnerException>
<HelpLink isNull="true" />
<InnerException isNull="true" />
<Message>A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)</Message>
<StackTrace>at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning() at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity) at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, SqlConnection owningObject) at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, TimeoutTimer timeout) at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, TimeoutTimer timeout, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) at System.Data.SqlClient.SqlConnection.Open() at System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure)</StackTrace>
<Type>System.Data.SqlClient.SqlException</Type>
</InnerException>
<Message>The underlying provider failed on Open.</Message>
<StackTrace>at System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) at System.Data.EntityClient.EntityConnection.Open() at System.Data.Objects.ObjectContext.EnsureConnection() at System.Data.Objects.ObjectQuery`1.GetResults(Nullable`1 forMergeOption) at System.Data.Objects.ObjectQuery`1.System.Collections.Generic.IEnumerable<T>.GetEnumerator() at System.Collections.Generic.List`1..ctor(IEnumerable`1 collection) at System.Linq.Enumerable.ToList[TSource](IEnumerable`1 source) at e_on_silverlight_bing.Web.Services.NewSiteService.GetDataTypes() in C:\Documents and Settings\richardsonl\My Documents\Visual Studio 2010\Projects\E-on Site Map\SilverlightApplication3\e-on silverlight bing.Web\Services\NewSiteService.svc.cs:line 65 at SyncInvokeGetDataTypes(Object , Object[] , Object[] ) at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs) at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(MessageRpc& rpc) at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet)</StackTrace>
<Type>System.Data.EntityException</Type>
</Detail>
<Action>http://schemas.microsoft.com/net/2005/12/windowscommunicationfoundation/dispatcher/fault</Action>
<Code>System.ServiceModel.FaultCode</Code>
<Message>The underlying provider failed on Open.</Message>
<Reason>The underlying provider failed on Open.</Reason>
<Data>
<KeysAndValues attr0="KeyValuePairArray" isNull="false" />
</Data>
<InnerException isNull="true" />
<TargetSite>Void HandleReturnMessage(System.Runtime.Remoting.Messaging.IMessage, System.Runtime.Remoting.Messaging.IMessage)</TargetSite>
<StackTrace>Server stack trace: at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter) at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout) at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs) at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation) at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)Exception rethrown at [0]: at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg) at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type) at NewSiteService.GetDataTypes() at NewSiteServiceClient.GetDataTypes()</StackTrace>
<HelpLink isNull="true" />
<Source>mscorlib</Source>
</FaultException1>
It looks like the service cannot see the database. I'm not particularly experienced with this sort of thing so I may be missing something important.
Within VS2010 I have the mdf file inside App_Data within the webpage. The service is within the services folder. I have published the site and moved the files and folders to a new folder within wwwroot. Any ideas?
Thanks again
Cap
Your problem is one of these:
your connection string is wrong:you must open web.config file in your web part of your project and right that.
database system is inaccessible because:
the database computer is turn off
firewall or antivirus of database system is active