I recorded uploading an attachment (pdf file) using blazemeter plugin, then open the jmx file using Jmeter. I modified uploads tab as in the following image and placed pdf file under bin directly. when i run the script i got 400 bad request , could you please advise what might be the issue?
As per 400 Bad Request status code description:
The HyperText Transfer Protocol (HTTP) 400 Bad Request response status code indicates that the server cannot or will not process the request due to something that is perceived to be a client error (for example, malformed request syntax, invalid request message framing, or deceptive request routing).
So I would recommend using a 3rd-party sniffer tool like Fiddler or Wireshark to capture the requests originating from JMeter and the real browser and compare them.
Requests must be exactly the same (apart from dynamic parameters which need to be correlated), once you amend your JMeter configuration so it will send the same request as the real browser does your file upload will be successful.
We cannot suggest anything meaningful unless we see successful and failing requests dumps fully (URL, headers and body)
Related
I have used the websocket open connection sampler request in my project.
URL: wss://sip-qa.forestreettelco.com:11443
while executing the jmeter script getting the Response message:"http upgrade failed with status code 400"
Please help me.enter image description here
As per HTTP Status Code 400 description
The HyperText Transfer Protocol (HTTP) 400 Bad Request response status code indicates that the server cannot or will not process the request due to something that is perceived to be a client error (e.g., malformed request syntax, invalid request message framing, or deceptive request routing).
So my expectation is that you're sending the wrong request which doesn't match what your server expects. As it is not publicly available I cannot come up with the proper configuration, however I believe you should start with normal HTTP Request sampler and add the following Headers to the request:
Connection: Upgrade
Upgrade: websocket
Whatever other headers which real browser sends like Sec-WebSocket-Protocol, Sec-WebSocket-Version, Sec-WebSocket-Key, etc.
The headers can be added using HTTP Header Manager
You can capture browser traffic using built-in browser developer tools or an external sniffer tool like Wireshark.
Once you will be sending the same sequence of the same requests you should get the same responses as for the real browser.
I have given two url in csv file and trying to load that in jmeter. I am getting 503 response code.
As per HTTP 503 status code description
The HyperText Transfer Protocol (HTTP) 503 Service Unavailable server error response code indicates that the server is not ready to handle the request.
Common causes are a server that is down for maintenance or that is overloaded. This response should be used for temporary conditions and the Retry-After HTTP header should, if possible, contain the estimated time for the recovery of the service.
Note: together with this response, a user-friendly page explaining the problem should be sent.
Caching-related headers that are sent along with this response should be taken care of, as a 503 status is often a temporary condition and responses shouldn't usually be cached.
So I can think of at least 3 possible issues:
Your server is really overloaded, you can try checking Response Data tab of the View Results Tree listener - if you're lucky - you will the the aforementioned "user-friendly page explaining the problem"
Your request is malformed and server is sending 503 response instead of 4xx which indicates client-side error. Double check what URL(s) you're trying to open by looking into Request tab of the View Results Tree listener and try to open it in the browser. If you're building the URL from parts (i.e. host, port, protocol, query string, etc.) - you might want to check if the values are correctly read from the CSV file using Debug Sampler
I fail to see HTTP Header Manager in your Test Plan, some servers check the client Headers, for example User-Agent or Accept and may report an error if the required header is missing (i.e. indicating that the browser is not supported)
I have recorded script in jmeter V3.3 via IE browser and then done correlation. When I run this script, then it is receiving internal server error 500 in response, however it works fine manually in IE browser and also while recording this scenario, it does not occur.
I also cross verified Header manager with Request Headers in network IE F12 Developer tool and it is uptodate.
Sampler Request
Http Get Request
It is simply Get request. I really appreciate for your help to handle this error in jmeter.
I hope you have compared both Request Headers one from IE Browser and from JMETER request headers to check if anything is not missing to pass. And also along with any dynamic id is not missing.
You are likely not checking for expected results with each step. As a result, you are receiving an HTTP 200 correct response page prior to your HTTP 500, but the content of the page is out of context with the expected results for the business process. When you make your next request the state of the application is not appropriate to your request. As an unhandled condition by the developer you are greeted with an HTTP 500 screen dump.
Most likely cause: Unhandled dynamic data component.
I have read and tried the solutions shared in the previous posts for this error but nothing helped me to fix this. Kindly help.
I am making a HTTPS API call. A very simple call which accepts a 2 KB JSON message via POST method and sends a one word acknowledgement. It works perfectly fine in Postman tool. In JMeter, no. of threads (users) is kept as 25. It works perfectly fine one time with all 25 success response and at times getting few failure response as
Response code: Non HTTP response code: java.net.SocketException
Response message: Non HTTP response message: Unexpected end of file from server
No consistency at all. I have also tried with both enabling and disabling "use keepalive" checkbox. Both giving me all success one time ; few/all failure at another time with the above error. Please help. Thank you.
Below are the JMeter settings:
HTTP Header Manager : Content-Type - application/json
HTTPRequest sampler : protocol - HTTPS
Server Name or IP : project server name
Method : POST
PATH : The required path with https authentication details passed as parameters
IMPLEMENTATION : Set to JAVA (HTTPCLIENT4 was giving me “443 failed to respond” error)
Add header
Connection Keep-Alive
Both errors (Java implementation and Apache HTTPClient4 implementation), are essentially saying the same thing: The server closed the connection, without providing any response. I think there could be the following reasons:
Authentication problem. If server side checks authentication before processing a request (e.g. using Spring), it may be rejecting your request, it may be not bothering with any response if authentication is not considered correct.
Request Issue. Some less noticeable properties of the request you send via Jmeter are different from what you send in Postman. It could be some minor thing with formatting, or some headers server expects. Some of such inconsistencies can also cause Load Balancer (if you use one) to reject request before it's delivered to the server.
Certificate issues. Since you are using HTTPS, you need to make sure your certificate is setup correctly on JMeter side.
So I suggest:
Review server logs and see if your request makes it to the server. If yes, you might be able to see how it was rejected. If not, you need to trace back and see who rejected it (LB, authentication, etc)
Compare headers and body sent by JMeter vs Postman line to line (use TCPDump for example to obtain it).
I am conducting a load testing using Jmeter to ensure massive of concurrent users able to request the image file from the server.
I have few question on the response code of the image(.png).
If the http status code is 200, does it mean the image fully fetched to the client from the server?
The response code is 200, image will still loading on the browser? or fully loaded?
HTTP is stateful protocol, therefore JMeter sends requests and has to wait for a response. If you getting http status code 200 it normally means that the request is completed successfully, so given your request is well-formed it should mean that the image is fully transferred.
However in some cases you may receive HTTP status code 200 which means that request has completed successfully on transport level, but in the response body you will get an error instead of the image. That's why I would recommend using MD5Hex Assertion which will automatically fail your HTTP Request sampler if image will be different from the expected one.
In the "Advanced" tab of your HTTP Request sampler tick "Save response as MD5 hash" box
Add ND5 Assertion as a child of the HTTP Request and put your image's MD5 checksum into the input field
That's it, HTTP Request sampler will be failed if downloaded image MD5 checksum is different from the provided one
See How to Use JMeter Assertions in Three Easy Steps article for more information on conditionally setting pass/fail criteria on JMeter tests
Following are the answers to your questions:
If the HTTP status code is 200, does it mean the image fully fetched to the client from the server?
Yes. Once you receive the HTTP Response Code, it does mean that complete transfer of the response from Server to Client is done. Please go through TCP/IP model. Data is divided into small TCP packets by Server and Client will combine all of them to form the data (responsibility of Transport Layer). Add screenshot of Wireshark tool to highlight this behaviour.
The response code is 200, image will still loading on the browser? or fully loaded?
Image is fully received by the client (JMeter). But JMeter does not render the output on GUI, not just images any HTTP response. So, the response times of any HTTP requests doesn't include page rendering time, which is a major factor we should consider. if JMeter tells the HTTP response time is x seconds, then from actual end-user perspective, it is x+browser rendering time.
Wireshark image: