I have a Spring Boot application that has a getmapping returning an ArrayList. This all works fine and it returns the arraylist as a json object in the body. I am trying to write a postman test on the response to verify the length of the arraylist that comes back. I cant seem to get it to find the arraylist on the object however since there doesn't appear to be any keys.
My Spring Code is:
#GetMapping(value="/getAllCars", produces = "application/json")
public #ResponseBody List<Car> getAllCars() {
return carManager.getAllCars();
}
The response in postman shows
[
{
"id": "19a94f8d-b1c1-4814-abba-57b1cb319478",
"name": "car1"
},
{
"id": "4e2568ca-f41a-480d-82b5-acede9109a6d",
"name": "car2",
},
{
"id": "4e2568ca-f41a-480d-82b5-acede9109a6d",
"name": "car3",
},
... (there is 72 total)
]
my test code in postman is is
pm.test("CarsLength" , function(){
const responseJson = pm.response.json;
pm.expect(responseJson.length).to.equal(72);
})
when i look at the postman console after logging the responseJson and responseJson.length its only logging out the function name and 2. responseJson[0] and responseJson[1] are both undefined when i log them out as well.
I dont have a key in my response json object is thats whats causing this? How can I access the objects to verify the length in a postman test?
The mistake is here:
pm.response.json --> pm.response.json()
Related
I'm working on a "global search" for my application.
Currently, I'm using hibernate-search to search for instances of multiple different objects and return them to the user.
The relevant code looks as follows:
Search.session(entityManager)
.search(ModelA.classs, ModelB.class)
.where(...)
.sort(...)
.fetch(skip, count);
Skip and count are calculated based on a Pageable and the result is used to create an instance of Page, which will be returned to the controller.
This works as I'd expect, however, the types generated by swagger-docs obviously doesn't know, what the type within the Page is, and therefore uses Object.
I'd like to expose the correct types, as I use them to generate the types for the frontend application.
I was able to set the type to an array, when overwriting the schema like this:
#ArraySchema(schema = #Schema(anyOf = {ModelA.class, ModelB.class}))
public Page<?> search(Pageable pageable) {
However, this just disregards the Page and also isn't correct.
The next thing I tried is extending the PageImpl, overwriting the getContent method, and specifying the same schema on this method, but this wasn't included in the output at all.
Next was implementing Page<T> myself (and later removing the implements reference to Page<T>) and specifying the same schema on getContent, iterator, and the field itself, but also to no effect.
How do I tell spring-docs, what the content of the resulting Page might be?
I stumbled upon this when trying to solve a similar problem
Inspired from this thread Springdoc with a generic return type i came up with the following solution, and it seems to apply to your case also. Code examples are in Kotlin.
I introduced a stub class that will just act as the Schema for the response:
private class PageModel(
#Schema(oneOf = [ModelA::class, ModelB::class]))
content: List<Object>
): PageImpl<Object>(content)
Then i annotated my Controller like this:
#Operation(
responses = [
ApiResponse(
responseCode = "200",
content = [Content(schema = Schema(implementation = PageModel::class))]
)
]
)
fun getPage(pageable: Pageable): Page<Object>
This generated this api response:
"PageModel": {
"properties": {
"content": {
"items": {
"oneOf": [
{
"$ref": "#/components/schemas/ModelA"
},
{
"$ref": "#/components/schemas/ModelB"
}
],
"type": "object"
},
"type": "array"
},
... -> more page stuff from spring's PageImpl<>
And in the "responses" section for the api call:
"responses": {
"200": {
"content": {
"application/json": {
"schema": {
"$ref": "#/components/schemas/PageModel"
}
}
},
"description": "OK"
}
All generated openapi doc is similar to the autogenerated json when returning a Page, it just rewrites the "content" array property to have a specific type.
I want to use while controller to keep sending GET HTTP Request and only proceed to next POST HTTP Request when the GET response "model_name": "Model-Test-20220221-0001"
POST HTTP Request - paramter model_name = Model-Test-${variable}-${counter}
While Controller
GET HTTP Request. sample GET response at below
Json Extractor
POST HTTP Request only when While Controller found the exact model_name.
JSON Extractor:
Names of created variable: modelname
Json path expressions: I have tried this but failed
$..valid_model_list[?(#.model_name = ${Model-Test-${variable}-${counter}})]
This is sample HTTP Request response:
{
"message": "success",
"valid_model_list": [
{
"meta_data": {
"corpus_list": [
"test1"
],
"id": "0c36effa244b4f6596d10f9e675303e1",
"sample_rate": 16000,
"split_ratio": {
"test": 40,
"train": 60
},
"model_name": "Model-Test-20220221-0001",
"status": "ok"
},
{
"meta_data": {
"corpus_list": [
"test1"
],
"id": "0c36effa244b4f6596d10f9e675303e1",
"sample_rate": 16000,
"split_ratio": {
"test": 40,
"train": 60
},
"model_name": "Model-Test-20220221-0002",
"status": "ok"
}
}
]
}
}
We're "unsure" as well as we don't know what you're trying to achieve.
JSON Extractor can extract values from the response, it's not possible to use it to extract values from the request, moreover you should "know" what you're sending in the request and extracting values from the response is the essential part of the correlation process
If you're looking for a JSONPath expression extracting the model_name attribute value you're supposed to provide full JSON. There is a Deep Scan operator so you should be able to use something like:
$..model_name
but if there are more than 1 matches you might need to limit the output with Filter Operators
More information:
JsonPath Getting Started
API Testing With JMeter and the JSON Extractor
Today I created one api gateway on aws and one java lambda function. Then finally integrated api gateway with lambda function.
So when I hit the api using postman then it returns the result which is basically a list of customer. Till now everything looks fine. Following is the
#Override
public TestResponse handleRequest(Request input, Context context) {
TestService testService = SingletonServiceManager.getInstance().getTestService();
TestListResponse response = (TestListResponse)productListService.executeRequest(input);
return response;
}
After executing it returns following output.
{
"status": 200,
"products": [
{
"name": "test1",
"code": "test1",
"status": true
},
{
"name": "test2",
"code": "test2",
"status": true
}
]
}
but when I started integrating this with api call with Angular from local machine it start throwing CORS issue. Angular client using it CORS setting to connect.
Can someone help me on this. Do I need to enable something special from lambda function.
You need to enable CORS in your API Gateway configuration.
I have a post data request as the following,
{
"doctorId":1,
"userId":29,
"sampleConditions":[
{
"conditionId":"14",
"conditionName":"Acne",
"conditionDate":"2017-01-31"
}
],
"labOrder":{
"testId" : [1,2,3]
}
}
what happens, if the client gives the incorrect key
"sampleConditionss":[
{
"conditionId":"14",
"conditionName":"Acne",
"conditionDate":"2017-01-31"
}
],
Instead of giving sampleConditions, the client have sent the request as sampleConditionss.
How can i handle the request,
When you are using springs the spring framework will return 400 and you need not do anything here
I've been trying to use the batch endpoint of MailChimp API (version 3.0) to subscribe new users to a list, but can't make it work.
Here is the request:
POST /3.0/batches
{
"operations": [
{
"method" : "POST",
"path" : "lists/c852ce5c86/members",
"body": "{\"email_address\":\"email#domain.tld\", \"status\":\"subscribed\"}"
}
]
}
The request seems ok cause I get a 200 response:
{
"id": "49abca6ef3",
"status": "finished",
"total_operations": 1,
"finished_operations": 1,
"errored_operations": 1,
"submitted_at": "2015-09-21T18:11:16+00:00",
"completed_at": "2015-09-21T18:11:23+00:00",
"response_body_url": "https://mailchimp-api-batch.s3.amazonaws.com/49abca6ef3-response.tar.gz?..."
}
However, as you can see, the only operation in my batch is errored.
Here is the response_body_url for this operation:
[{
"status_code":400,
"operation_id":null,
"response":"{
\"type\":\"http://kb.mailchimp.com/api/error-docs/400-invalid-resource\",
\"title\":\"Invalid Resource\",
\"status\":400,
\"detail\":\"The resource submitted could not be validated. For field-specific details, see the 'errors' array.\",
\"instance\":\"\",
\"errors\":[{
\"field\":\"\",
\"message\":\"Schema describes object, NULL found instead\"
}]
}"
}]
which is not very helpful :(
Note that if I directly hit POST lists/c852ce5c86/members with {"email_address":"email#domain.tld", "status":"subscribed"} payload, it's working properly.
That was actually a bug in the mailchimp API. After reaching them they quickly fixed it.