Trying to run pod install in a new React Native project and getting this error. Ruby is installed with brew
I have installed chruby and ruby-install, which I have then used to install ruby-2.7.5 cocopods, ffi and bundler. When trying bundler to install I get this error:
warn Multiple Podfiles were found: ios/Podfile,vendor/bundle/ruby/2.7.0/gems/cocoapods-core-1.11.3/lib/cocoapods-core/Podfile. Choosing ios/Podfile automatically. If you would like to select a different one, you can configure it via "project.ios.sourceDir". You can learn more about it here: https://github.com/react-native-community/cli/blob/master/docs/configuration.md
[Codegen] Generating ./build/generated/ios/React-Codegen.podspec.json
fatal: not a git repository (or any of the parent directories): .git
Analyzing dependencies
Fetching podspec for `DoubleConversion` from `../node_modules/react-native/third-party-podspecs/DoubleConversion.podspec`
[Codegen] Found FBReactNativeSpec
Fetching podspec for `RCT-Folly` from `../node_modules/react-native/third-party-podspecs/RCT-Folly.podspec`
Fetching podspec for `boost` from `../node_modules/react-native/third-party-podspecs/boost.podspec`
Fetching podspec for `glog` from `../node_modules/react-native/third-party-podspecs/glog.podspec`
Fetching podspec for `hermes-engine` from `../node_modules/react-native/sdks/hermes/hermes-engine.podspec`
[!] Couldn't determine repo type for URL: `https://cdn.cocoapods.org/`: Permission bits for '/Users/macbook/.netrc' should be 0600, but are 644
So I put out a bounty on this because I couldn't figure it out for ages. Until I did. (Hopefully this fix works for everyone else)
First when I ran xcode-select -p it was returning /Library/Developer/CommandLineTools
However this looked odd as another an answer here seemed to suggest that maybe this was causing an issue. It ended up that I just hadn't set my CLI tools correctly as described in the react native docs. Since it only had one option in the dropdown I assumed that the CLI tools were already set. However when I went back and specifically clicked on the one option, it made changes to my system.
Now running xcode-select -p returns /Application/Xcode.app/Contents/Developer
TL;DR : Open Xcode, go to 'Settings...' in the menu bar. Then go to the 'Locations' tab and click on the 'Command Line Tools' dropdown and click on the latest version (click on a version even if it seems like a version is already set). Now try your pod install again!
Probably this answer(https://stackoverflow.com/a/69427481/8988448) would solve your issue. Looks like you haven't given proper permissions.
run chmod 600 ~/.netrc and once it is done, run pod install.
Got same error as below:
✔ Downloading template
✔ Copying template
✔ Processing template
ℹ Installing dependencies
✔ CocoaPods (https://cocoapods.org/) is not installed. CocoaPods is necessary for the iOS project to run correctly. Do you want to install it? › Yes, with gem (may require sudo)
✔ Installing CocoaPods
✔ Installing Bundler
✖ Installing CocoaPods dependencies (this may take a few minutes)
error warn Multiple Podfiles were found: ios/Podfile,vendor/bundle/ruby/2.7.0/gems/cocoapods-core-1.11.3/lib/cocoapods-core/Podfile. Choosing ios/Podfile automatically. If you would like to select a different one, you can configure it via "project.ios.sourceDir". You can learn more about it here: https://github.com/react-native-community/cli/blob/master/docs/configuration.md
✖ Installing CocoaPods dependencies (this may take a few minutes)
error Error: Looks like your iOS environment is not properly set. Please go to https://reactnative.dev/docs/next/environment-setup and follow the React Native CLI QuickStart guide for macOS and iOS.
Environment: macOS Catalina 10.15.7
Through gem installed cocoapods like below.
rn sudo gem install -n /usr/local/bin cocoapods
Password:
When run react-native init myproj, choose gem to install coacopods again.
Hello once I also had same issue . I have resolve it.Follow this step it would work .
This error is cause by installing same package multiple time in single project
Try to remove that package from project and reinstall that project.
Try to uninstall ruby-2.7.5
yarn remove package name
yarn add package name
or
npm uninstall package name
npm install package name
and
cd ios && pod install && cd ..
npx react-native run-ios
Related
I am trying to install pods for a react native app , but I can't install the pods. I tried several times with different approaches like the following:
sudo arch -x86_64 gem install ffi and arch -x86_64 pod install
or installing via rosetta terminal
or installing with homebrew
or switching to another ruby version (ruby-2.7.5) with rvm use
but pod install always fails with the following error message: incompatible library version - /Users/user/.rvm/gems/ruby-3.0.0/gems/ffi-1.15.5/lib/ffi_c.bundle it seems like the current ruby version is not compatible with the ffi and the cocoapods version.
Can anyone help me or have another idea why it does not work?
I think another problem could be that it uses different ruby versions within the process of installation because I have ruby installed with homebrew and on another location too.
Steps to follow :
-> remove pods from your system and install it via homebrew
-> close the terminal and start new terminal
-> remove node modules from the project
-> remove pods folder in ios
-> remove podfile.lock
For a clear understanding follow this solution
Run pod install and hitting this error. Just upgraded to Xcode 13 beta.
[!] Your Podfile requires that the plugin cocoapods-patch be
installed. Please install it and try installation again.
How to resolve this?
The obvious answer is "sudo pod install cocoapods-patch", but this fails because of conflicts of binaries, and if you do not overwrite them, it aborts instead of continuing on with installing other files. Back these files up, overwrite them, and then restore them, and then it will actually be installed.
sudo gem install cocoapods-patch
I'm trying to run my App on IMB Cloud. Server run is OK. NPM Installed and Started. When POD Install from cd /ios it shows error:
denisbondar#MBP-Denis ios % pod install
[!] Invalid Podfile file: [!] Unable to locate the executable node.
# from /Users/denisbondar/Documents/kickapp/starter-kit/mobile-app/ios/Podfile:48
# -------------------------------------------
#
use_native_modules!
# end
# -------------------------------------------
Any thoughts? Thanks!
I had the same Issue. As I was trying to run a React Native App, and I needed some node module I have to run
brew install node
Just had the same issue, after updating cocoa pods the installation passed:
sudo gem install cocoapods
brew remove cocoapods && sudo gem install cocoapods
If you're running into this issue on an M1 Mac, this is what fixed it for me:
sudo arch -x86_64 gem install ffi
In your /ios directory:
arch -x86_64 pod install
I am aware that the commands I ran in order to fix my build have already been mentioned on this page, but I'll try to provide the order I ran them + some backstory.
For me the problem was that I've initally installed cocoapods using homebrew and I couldn't get it to update past version 1.5.2. Tried different approaches but pod --version still printed 1.5.2.
Then I've tried installing cocoapods using gems with:
sudo gem install cocoapods
Even if it displayed that the installation of cocoapods 1.10.1 was successful, the command line from terminal still pointed to the homebrew version of cocoapods, and pod --version still printed out 1.5.2. So I had to remove it, by calling:
brew remove cocoapods
After that the command line pointed to the gems version of cocoapods (1.10.1). And the build was successful.
BEWARE I AM MAC OS NOOBIE SO PROCEED WITH CAUSION FOR THE NEXT PART
Also, my friend tried to follow the exact same steps and his build still failed until he tried installing:
sudo arch -x86_64 gem install ffi
then after the installation he ran:
arch -x86_64 pod install
Again, I am a MAC OS noobie, so I don't understand very well yet what's the deal with this ffi. It just helped my friend getting his build done, so I thought it might also help somebody else.
For me problem was that I have cocoa pods installed by brew install cocoapods and brew install --cask cocoapods.
So to fix I run
brew remove cocoapods
brew remove --cask cocoapods
brew install cocoapods
After that I have latest version of cocoapods and everything worked.
I tried installing Nativescript on my machine and successfully ran all the commands but when I ran TNS doctor I got the following error.
Verifying CocoaPods. This may take more than a minute, please be patient.
Installing iOS runtime.tns-ios#2.1.1 ../../var/folders/pr/zxhdgq354w36_v4jnkyg89fr0000gn/T/nativescript-check-cocoapods11679-71167-clmpmh/node_modules/tns-ios
Verifying CocoaPods. This may take some time, please be patient..
sandbox-exec: /Users/myname/.rvm/gems/ruby-2.3.1#global/gems/cocoapods-1.0.1/bin/pod: Operation not permitted
WARNING: There was a problem with CocoaPods
Verify that CocoaPods are configured properly.
There seem to be issues with your configuration.
1
I have googled around for a fix but could not get any answer e.g. https://github.com/NativeScript/nativescript-cli/issues/1943
There was a mention of chmodding ./Pods but that didn't work. Has anyone else had this problem and fixed it?
I have installed and checked cocoapods but it still yields the same error.
Last login: Tue Aug 9 19:24:23 on ttys000
XXX-MacBook-Air:~ mine$ sudo gem install cocoapods
Password:
Successfully installed cocoapods-1.0.1
Parsing documentation for cocoapods-1.0.1
Done installing documentation for cocoapods after 4 seconds
1 gem installed
XXX-MacBook-Air:~ mine$ pod --version
1.0.1
`
Install your CocoaPods with superuser permissions.
sudo gem install cocoapods
And then check if they are installed correctly
pod --version
Also, you might want to update your XCode version if you are using older one.
Refer to this issue for similar problem discussed.
You will need a lower version of cocoapods first you will need to remove your current version sudo gem uninstall cocoapods then you can proceed to install
sudo gem install activesupport -v 4.2.6
sudo gem install cocoapods -v 0.39.0
After installing cocoapods you can try creating a demo app and run it
tns create demoApp
cd demoApp
tns run ios
You can ignore tns doctor for now
After some research I found the right answer (at least for me) and paste it for future references.
currently using:
MacOs Sierra with
xcode: v7.3.0
cocoapods: v1.0.1
nativescript: v2.3.0
node: v6.8.1
Steps:
Locate your node_modules folder where your global npm packages are installed (I am using nvm version manager and node v6.8.1 so it was /Users/myuser/.nvm/versions/node/v6.8.1/lib/node_modules/nativescript/config).
open node_modules/nativescript/config/config.json
Change the value of USE_POD_SANDBOX to false
Reason (as act of faith): NativeScript uses the sandbox-pod executable. This may prevent some pods from installing correctly. If you encounter such cases, you can switch to the regular pod executable.
original source: https://github.com/NativeScript/nativescript-cli/issues/1943#issuecomment-246186556
[Cocoapods problems][1]
[1]: https://i.stack.imgur.com/fCWVI.png
[continue Cocoapods problems][2]
[2]: https://i.stack.imgur.com/trSvT.png
[continue Cocoapods problems][3]
[3]: https://i.stack.imgur.com/iwvhK.png
After downloading the hyperloop-examples files, and running appc ti build -p ios, I get errors when Hyperloop finds the CocoaPods dependencies.
The exact error text is:
[ERROR] An error occurred during build after 3s 372ms
[ERROR] pod install returned a non-zero exit code
The only change I had to make was to set sdk-version in tiapp.xml to 5.4.0.v20160608165242 instead of 5.4.0 (pulled this version of the SDK by running appc ti sdk install -b 5_4_X)
appc -v returns 5.2.2
appc ti -v returns 5.0.6
Also, if I remove the Podfile file, the app builds and runs on the simulator. Most of the samples work (obviously not the Third-Party Libraries one). I see in some of the other issues where people were able to get the cocoapod dependencies working, so this may just be a cocoapod issue with my machine.
pod --version returns 1.0.1
pod install provides the error:
Could not automatically select an Xcode project. Specify one in your Podfile like so:
Version 1.0.1 of cocoapods does not work with hyperloop right now. Uninstalled that version and installed 0.39.0 instead resolved the issue.
sudo gem install cocoapods -v 0.39.0
One way that worked for me:
Remove cocoapods
gem uninstall --all --executables cocoapods
Install it again
sudo gem install cocoapods
Make sure you're running latest node lts (4.5.0)
Re-open Appc Studio to see it works