I have installing gem on a Macbook Pro running Big Sur and M1 chip. I have followed the instructions given, added these two lines on top of my Podfile
plugin 'cocoapods-user-defined-build-types'
enable_user_defined_build_types!
then I am running the command
sudo gem install 'cocoapods-user-defined-build-types'
and gem is getting installed see below -
Successfully installed cocoapods-user-defined-build-types-0.0.7
Parsing documentation for cocoapods-user-defined-build-types-0.0.7
Done installing documentation for cocoapods-user-defined-build-types after 0 seconds
1 gem installed
Now, as soon as I run pod install, I get this error -
[!] Invalid Podfile file: undefined method `enable_user_defined_build_types!' for #<Pod::Podfile:0x0000000145251098 #defined_in_file=#<Pathname
Any idea what excatly is the problem here?
I solved this issue by installing specific version of cocoapods with gem.
Open a terminal in your Xcode project folder and run the commands below:
gem cleanup
brew uninstall cocoapods
sudo gem uninstall cocoapods
sudo gem install cocoapods -v 1.10.0 -n /usr/local/bin
sudo gem install cocoapods-user-defined-build-types
pod install --repo-update
NOTE! If you using react-native before pod install --repo-update delete your node_modules folder and install again using npm
I was struggling to get a solution,
I was trying to install the snapkit and Firebase through cocoapods, I got pod init, but after insert inside the podfile the e.g. Snpakit when I tried the comand pod install i got this issue
[!] Invalid Podfile file: undefined method......
What solved for me
I installed the brew through terminal and by brew I reinstalled cocoapods
another thing that was crucial...
when I typed insert my pod
pod 'SnapKit', '~> 5.6.0'
The Podfile, automatically change de first character to uppercase
Pod 'SnapKit', '~> 5.6.0'
After you type your pod, try to leave the word pod in lowercase, after save and close, go to terminal and try again pod install
add gem 'cocoapods-user-defined-build-types' to your gemfile and run bundle install
this should work if the other solutions didn't
I'm running the install with an admin account I tried
sudo gem install cocoapods
and
sudo gem install cocoapods -n /usr/local/bin
They both run fine with following output
Fetching cocoapods-1.9.1.gem
Successfully installed cocoapods-1.9.1
Parsing documentation for cocoapods-1.9.1
Installing ri documentation for cocoapods-1.9.1
Done installing documentation for cocoapods after 2 seconds
1 gem installed
however, a simple
pod --version
Returns
zsh: command not found: pod
I'm not too good at managing users accounts or dealing with command shell but I scoured the net and couldn't find a solution. It looks like wherever pod is installed, it doesn't make it to the list of executable applications
The issue was that command line for XCODE was not installed.
First I updated to latest Ruby version and put the version number in the second command (in place of [version]
curl -L https://get.rvm.io | bash -s stable
rvm install ruby-[version]
During the install you will see the Software update available from MAcOS popup. Install immediately and continue with prompts in that window (I believe it asks for updates and then asks for install.
It will take a while to run / download / install (it took 2 expressos for me :) )
After that I ran
sudo gem install cocoapods
And restarted my terminal.
Now checking it's installed
pod --version
Returns the installed version (1.9.1 for me)
I followed these instructions but ended up with the same issue. So I ran gem list | grep cocoapods and then uninstalled every instance of cocoapods with gem uninstall cocoapods along with the executables. Then I decided to install cocoapods using Homebrew with brew install cocoapods, restarted my Mac and the pod command was available. Remember I didn't restart my Mac after using sudo gem install cocoapods,maybe that will work too, you can try.
I am trying to create a Podfile for my Xcode project for Firebase compatibility, but when I try to create it within the same file that my Xcode project is stored in, using my terminal and typing "pod init", it throws the error "-bash: pod: command not found".
I am up to date on OSX as far as I'm aware, using Sierra 10.12.1, but I am unfamiliar with the use of Podfiles, so any help here would be great, thanks.
Looks like you didn't install CocoaPods.
To do that you install it through ruby gems, like this:
sudo gem install cocoapods
If you don't have admin privileges, try:
gem install cocoapods --user-install
if the 1st command doesn't work, try the 2nd command
sudo gem install cocoapods
sudo gem install -n /usr/local/bin cocoapods
In my case, the 2nd command worked
For OS Catalina (as of December 2019)
gem install -n /usr/local/bin cocoapods
Brew install
$ brew install cocoapods
For me sudo gem install cocoapodsdid not work.
When I tried $sudo gem install -n /usr/local/bin cocoapods it threw me weird error messages. But brew install was pretty neat.
Got this error today. Was able to resolve it by making sure I had ruby in my PATH.
export PATH=/usr/bin/ruby:$PATH
Then (as suggested by answers above) run
sudo gem install cocoapods
Or
sudo gem install -n /usr/local/bin cocoapods
I ran into this problem yesterday, I reckon others in my situation will be too. So I am running a mac OS siera on a virtual machine on my windows so I can use xcode. Firstly you will need to update your version of ruby, it has been answered here: https://stackoverflow.com/a/38194139/7451779.
Once updated this just run: $ sudo gem install cocoapods
After all this $ pod init should work
I tried installing Nativescript on my machine and successfully ran all the commands but when I ran TNS doctor I got the following error.
Verifying CocoaPods. This may take more than a minute, please be patient.
Installing iOS runtime.tns-ios#2.1.1 ../../var/folders/pr/zxhdgq354w36_v4jnkyg89fr0000gn/T/nativescript-check-cocoapods11679-71167-clmpmh/node_modules/tns-ios
Verifying CocoaPods. This may take some time, please be patient..
sandbox-exec: /Users/myname/.rvm/gems/ruby-2.3.1#global/gems/cocoapods-1.0.1/bin/pod: Operation not permitted
WARNING: There was a problem with CocoaPods
Verify that CocoaPods are configured properly.
There seem to be issues with your configuration.
1
I have googled around for a fix but could not get any answer e.g. https://github.com/NativeScript/nativescript-cli/issues/1943
There was a mention of chmodding ./Pods but that didn't work. Has anyone else had this problem and fixed it?
I have installed and checked cocoapods but it still yields the same error.
Last login: Tue Aug 9 19:24:23 on ttys000
XXX-MacBook-Air:~ mine$ sudo gem install cocoapods
Password:
Successfully installed cocoapods-1.0.1
Parsing documentation for cocoapods-1.0.1
Done installing documentation for cocoapods after 4 seconds
1 gem installed
XXX-MacBook-Air:~ mine$ pod --version
1.0.1
`
Install your CocoaPods with superuser permissions.
sudo gem install cocoapods
And then check if they are installed correctly
pod --version
Also, you might want to update your XCode version if you are using older one.
Refer to this issue for similar problem discussed.
You will need a lower version of cocoapods first you will need to remove your current version sudo gem uninstall cocoapods then you can proceed to install
sudo gem install activesupport -v 4.2.6
sudo gem install cocoapods -v 0.39.0
After installing cocoapods you can try creating a demo app and run it
tns create demoApp
cd demoApp
tns run ios
You can ignore tns doctor for now
After some research I found the right answer (at least for me) and paste it for future references.
currently using:
MacOs Sierra with
xcode: v7.3.0
cocoapods: v1.0.1
nativescript: v2.3.0
node: v6.8.1
Steps:
Locate your node_modules folder where your global npm packages are installed (I am using nvm version manager and node v6.8.1 so it was /Users/myuser/.nvm/versions/node/v6.8.1/lib/node_modules/nativescript/config).
open node_modules/nativescript/config/config.json
Change the value of USE_POD_SANDBOX to false
Reason (as act of faith): NativeScript uses the sandbox-pod executable. This may prevent some pods from installing correctly. If you encounter such cases, you can switch to the regular pod executable.
original source: https://github.com/NativeScript/nativescript-cli/issues/1943#issuecomment-246186556
[Cocoapods problems][1]
[1]: https://i.stack.imgur.com/fCWVI.png
[continue Cocoapods problems][2]
[2]: https://i.stack.imgur.com/trSvT.png
[continue Cocoapods problems][3]
[3]: https://i.stack.imgur.com/iwvhK.png
I installed pod some time ago. However, it's stopped working so I'm working through this again.
However, I almost immediately run into a problem here:
pod install
-bash: pod: command not found
Any suggestions why this happened?
OK, found the problem. I upgraded Ruby some time ago and blasted away a whole load of gems. Solution:
sudo gem install cocoapods
For none-sudo use:
export GEM_HOME=$HOME/.gem
export PATH=$GEM_HOME/bin:$PATH
gem install cocoapods --user-install
Installing CocoaPods on OS X 10.11
These instructions were tested on all betas and the final release of El Capitan.
Custom GEM_HOME
This is the solution when you are receiving above error
$ mkdir -p $HOME/Software/ruby
$ export GEM_HOME=$HOME/Software/ruby
$ gem install cocoapods
[...]
1 gem installed
$ export PATH=$PATH:$HOME/Software/ruby/bin
$ pod --version
0.38.2
This Step Is Proper Working.
Pod Install
[ 1 ] Open terminal and type:
sudo gem install cocoapods
Gem will get installed in Ruby inside the System library. Or try on 10.11 Mac OSX El Capitan, type:
sudo gem install -n /usr/local/bin cocoapods
If there is an error "activesupport requires Ruby version >= 2.xx", then install the latest active support first by typing in the terminal.
sudo gem install activesupport -v 4.2.6
[ 2 ] After installation, there will be a lot of messages, read them and if no error found, it means cocoa pod installation is done. Next, you need to set up the cocoa pod master repo. Type in terminal:
pod setup
And wait it will download the master repo. The size is very big (370.0MB in Dec 2016). So it can be a while. You can track the download by opening Activity and go to the Network tab and search for git-remote-https. Alternatively, you can try adding verbose to the command like so:
pod setup --verbose
[ 3 ] Once done it will output "Setup Complete", and you can create your XCode project and save it.
[ 4 ] Then in a terminal cd to "your XCode project root directory" (where your .xcodeproj file resides) and type:
pod init
[ 5 ] Then open your project's podfile by typing in terminal:
open -a Xcode Podfile
[ 6 ] Your Podfile will get open in text mode. Initially, there will be some default commands in there. Here is where you add your project's dependencies. For example, in the podfile, type
/****** These are Third party pods names ******/
pod 'OpenSSL-Universal'
pod 'IQKeyboardManager'
pod 'FTPopOverMenu'
pod 'TYMActivityIndicatorView'
pod 'SCSkypeActivityIndicatorView'
pod 'Google/SignIn'
pod 'UPStackMenu'
(this is For example of adding library to your project).
When you are done editing the podfile, save it and close XCode.
[ 7 ] Then install pods into your project by typing in terminal:
pod install
Depending on how many libraries you added to your podfile for your project, the time to complete this varies. Once completed, there will be a message that says
"Pod installation complete! There are X dependencies from the Podfile and X total pods installed."
For macOS:
brew install --cask cocoapods
Original answer (outdated):
brew install cocoapods
brew cask install cocoapods-app
You have to restart Terminal after installing the gem. Or you can simply open a new tab Terminal to fix.
for M1mac people
first install cocoapods
brew install cocoapods
and if you are doing this for ios react-native
pod install
I had the same problem, running Mountain Lion with Ruby 2 installed and used instead of system ruby.
Previously I added PATH=/usr/local/bin:$PATH to my ~/.bash_profile as a way to make sure stuff installed by homebrew, including Ruby 2, took precedence over system-installed binaries.
Anyway, in this case I noticed that cocoapods would install their 'pod' binary not in /usr/local/bin but rather in /usr/local/Cellar/ruby/2.0.0-p247/bin/
So to my .bash_profile I added PATH=$PATH:/usr/local/Cellar/ruby/2.0.0-p247/bin/
and now cocoapods is working like a charm.
Uninstall all instances of cocopods by this command
$sudo gem uninstall cocoapods
sudo gem install -n /usr/local/bin cocoapods
sudo chmod +rx /usr/local/bin/
Try this:
sudo gem install cocoapods -V
and you must update gem to the newest release using this:
sudo gem update --system
if you want to enjoy the fast responce :)
try:
rbenv global system
and then
sudo gem install cocoapods
pod setup
Sudo-less installation
If you do not want to grant RubyGems admin privileges for this process, you can tell RubyGems to install into your user directory by passing either the --user-install flag to gem install or by configuring the RubyGems environment. The latter is in our opinion the best solution. To do this, create or edit the .profile file in your home directory and add or amend it to include these lines:
export GEM_HOME=$HOME/.gem
export PATH=$GEM_HOME/bin:$PATH
Note that if you choose to use the --user-install option, you will still have to configure your .profile file to set the PATH or use the command prepended by the full path. You can find out where a gem is installed with gem which cocoapods. E.g.
$ gem install cocoapods --user-install
$ gem which cocoapods
/Users/eloy/.gem/ruby/2.0.0/gems/cocoapods-0.29.0/lib/cocoapods.rb
$ /Users/eloy/.gem/ruby/2.0.0/bin/pod install
Source: https://guides.cocoapods.org/using/getting-started.html
In terminal it's better to run installation of the cocoa pods with "sudo". In other case I'm getting an error: "You don't have write permissions for the /Library/Ruby/Gems/2.0.0 directory."
So the solution is:
sudo gem install cocoapods
so I also had the same problem. This is probably happening because your computer has an older version of ruby. So you need to first update your ruby. Mine worked for ruby 2.6.3 version.I got this solution from sStackOverflow,
You need to first open terminal and put this code
curl -L https://get.rvm.io | bash -s stable
Then put this command
rvm install ruby-2.6
This would install the ruby for you if it hasn' t been installed.After this just update the ruby to the new version
rvm use ruby-2.6.3
After this just make ruby 2.6.3 your default
rvm --default use 2.6.3
This would possibly fix your issue. You can now put the command
sudo gem install cocoapods
And the command
pod setup
I hope this was useful
This solution worked for me. Make sure to not miss the last command (export PATH=$PATH:$HOME/Software/ruby/bin).
See This.
install cocoapods from https://cocoapods.org/app
Commands & versions keep onchanging
so download tar and enjoy
gterzian is on the right track, however, if you later update your version of ruby then you'll also have to update your .profile to point to the new versioned ruby directory. For instance, the current version of ruby is 2.0.0-p353 so you'd have to add /usr/local/Cellar/ruby/2.0.0-p353/bin to your path instead.
A better solution is to add /usr/local/opt/ruby/bin to your PATH. /usr/local/opt/ruby is actually a symlink to the current version of ruby that homebrew automatically updates when you do an upgrade. That way you'll never need to update your PATH and always be pointing to the latest version.
it happens to me when I wrote
gem install cocoapods
instead of
sudo gem install cocoapods
if sudo command is not found also, write
export PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:$PATH
before sudo command
If you used homebrew to install ruby, this answer worked for me.
brew unlink ruby && brew link ruby
OSX 10.9.4
#Babul Prabhakar was right
IMPORTANT:
However,if you still get "pod: command not found" after using his solution, this command could solve your problem:
sudo chown -R $(whoami):admin /usr/local
Please remove the Ruby folder from -Your Disk->Library->Ruby
Deleting this folder and use sudo gem install cocoapods command to solve my issue.
The best solution for Big Sur is posted on Redit by _fgmx
Go into Xcode 12 preferences Click locations Select Xcode 12 for Developer tools/command line tools Install cocoapods for Xcode 12: sudo gem install cocoapods
This worked for me
sudo apt-get install ruby-dev
sudo gem install cocoapods
CocoaPods is built with Ruby and it will be installable with the default Ruby available on macOS. You can use a Ruby Version manager, however we recommend that you use the standard Ruby available on macOS unless you know what you're doing.
sudo gem install cocoapods
Resource: https://guides.cocoapods.org/using/getting-started.html
We were using an incompatible version of Ruby inside of Terminal (Mac), but once we used RVM to switch to Ruby 2.1.2, Cocoapods came back.
Install pod
sudo gem install cocoapods
Navigate inside platforms/ios
cd platforms/ios
Run pod install
I'm using OS Catalina and used the solution of Babul Prabhakar.
But when I closed the terminal, pod still was unable.
So I put the exports:
$ export GEM_HOME=$HOME/Software/ruby
$ export PATH=$PATH:$HOME/Software/ruby/bin
inside this file(put this command below inside the terminal):
nano ~/.bash_profile
Then save the file, close the terminal and open it up again and type:
pod --version
this link help me a lot
it work now for me on catalina (patched for macbook pro 2011) with xcode 12.4.
may sure that you don't have another older version on your mac, for me having an old xcode 10.x in my download folder caused me many issue, so read verbose instruction in terminal, that help me to solve my problem.