while I am running the script in j meter some http requests show 409 error.
I've recorded a website while executing the script in view results tree it shows 409 conflict error in some http requests.
As per HTTP Status 409 description:
The HTTP 409 Conflict response status code indicates a request conflict with the current state of the target resource.
Conflicts are most likely to occur in response to a PUT request. For example, you may get a 409 response when uploading a file that is older than the existing one on the server, resulting in a version control conflict.
So it looks like exactly your case: you recorded a request which modified some file and its timestamp is older that the current version in the system under test.
Inspect the request and perform parameterization of the request data, for example if there is a hard-coded date and/or time use i.e. __time() function to send the current timestamp.
See JMeter Parameterization: The Complete Guide for more hints
Most likely you are creating duplicate entities due to repeating the same requests. You have to make sure all entities are unique (if this is required by the system). You have to modify all http samplers that create something which should be unique.
Related
I am new to JMetet and I am having a lot of difficulties in understanding how it works.
I created a TC to add an object to my system using Blaze meter. Then, I imported the TC in Jmeter.
This TC fails when it should not (at least thats what I think) because whenever I use the system it works correctly:
This is the thread group if you need it to help me:
Am I doing something wrong? AM I missing something?
IMPORTANT: Should I be able to see my object added to the system if the TC passes?
As per HTTP Status Code 403 Forbidden description:
The HTTP 403 Forbidden client error status response code indicates that the server understood the request but refuses to authorize it.
This status is similar to 401, but in this case, re-authenticating will make no difference. The access is permanently forbidden and tied to the application logic, such as insufficient rights to a resource.
If your script assumes authentication most probably it fails somewhere somehow due to missing or improperly working correlation, for example this eedd968fe... bit
looks utterly suspicious, most probably you need to replace it with a some form of dynamic parameter extracted from the previous request using a suitable JMeter Post-Processor
Normally the flow looks like:
Open login page
Identify and extract all dynamic parameters and save them into JMeter Variables
Send the parameters along with credentials in the 2nd request
Check out Using Regular Expressions to Extract Tokens and Session IDs to Variables article for example challenge and solution
I am new to JMeter. I am using it for load testing for Microstrategy web dossiers. I am loading the users from CSV Config file. I have generated steps using Badboy software and exported as Jmeter file. I have added variables for userID and password. I have enabled "Retrieve all Embedded Resources". When I ran the testing. I observed that its giving same response even if password is wrong. taskProcs are giving connection closed error. I have searched with dossier ID in both the cases , I am able to see the request and response same even if password is wrong. Can you help me how to identify whether the credentials matched or not ? I would like to throw error when password didn't match ? I thought of adding Response Assertions but responses are same.
JMeter automatically treats HTTP Response Status codes below 400 as successful. So if HTTP Request sampler returns status 200 (or any other between 100 and 399) it's treated as success.
JMeter doesn't perform any checks for content, if you need to add explicit pass/fail criteria basing on the response body, presence or absence of certain text, sampler execution time, etc. you need to add a relevant Assertion and put the anticipated success criteria into the assertion.
First JMeter doesn't generate any error codes or error messages itself, what it actually do is working as client and giving back what application sends to JMeter.
I think first you have to make sure application works correctly, then check whether Jmeter scripts work correctly. For that add debug sampler before the API request and check whether variables username, password has evaluated correctly from the csv.
I have given two url in csv file and trying to load that in jmeter. I am getting 503 response code.
As per HTTP 503 status code description
The HyperText Transfer Protocol (HTTP) 503 Service Unavailable server error response code indicates that the server is not ready to handle the request.
Common causes are a server that is down for maintenance or that is overloaded. This response should be used for temporary conditions and the Retry-After HTTP header should, if possible, contain the estimated time for the recovery of the service.
Note: together with this response, a user-friendly page explaining the problem should be sent.
Caching-related headers that are sent along with this response should be taken care of, as a 503 status is often a temporary condition and responses shouldn't usually be cached.
So I can think of at least 3 possible issues:
Your server is really overloaded, you can try checking Response Data tab of the View Results Tree listener - if you're lucky - you will the the aforementioned "user-friendly page explaining the problem"
Your request is malformed and server is sending 503 response instead of 4xx which indicates client-side error. Double check what URL(s) you're trying to open by looking into Request tab of the View Results Tree listener and try to open it in the browser. If you're building the URL from parts (i.e. host, port, protocol, query string, etc.) - you might want to check if the values are correctly read from the CSV file using Debug Sampler
I fail to see HTTP Header Manager in your Test Plan, some servers check the client Headers, for example User-Agent or Accept and may report an error if the required header is missing (i.e. indicating that the browser is not supported)
I have a JMeter plan using an HTTP sampler that I am trying to add a header to the request. The header should be really simple custom: type
But when I run the test I don't see the header....
What am I missing? Why is my header not showing up in the request?
Update
I also tried this but got the same result.
Your issue is due to wrong scoping of Header Manager.
Either put it as child of Get Session or child of Test plan if it applies to whole Requests of test plan.
Example:
If it fails, it could be due to your User Credentials Pre-Processor (which runs before GetSession request is sent), but as you don't show code.
Another option is that you're seeing redirect request instead of initial one, check your config so that you see the 2 requests:
I had the same issue (When editing the HTTP Header at the thread level it would use my old values) I didn't realize I had a HTTP Header at a lower level as well. So make sure to remove any other instance of HTTP Header manager. I had one at the Thread Group level and the https request level. I deleted the one at the https level and it fixed my issue.
What is optimal HTTP response Code when not reporting 200 (everything OK) but error in input?
Like, you submit some data to server, and it will response that your data is wrong
using 500 looks more like Server Issue
using 200 with warning/error response text is bad (allowing caching and everything is not OK)
using 204 and returning nothing, is maybe good (but well supported?)
using 404 is wrong if requested path (script) is available and in proper place
We had the same problem when making our API as well. We were looking for an HTTP status code equivalent to an InvalidArgumentException. After reading the source article below, we ended up using 422 Unprocessable Entity which states:
The 422 (Unprocessable Entity) status code means the server understands the content type of the request entity (hence a 415 (Unsupported Media Type) status code is inappropriate), and the syntax of the request entity is correct (thus a 400 (Bad Request) status code is inappropriate) but was unable to process the contained instructions. For example, this error condition may occur if an XML request body contains well-formed (i.e., syntactically correct), but semantically erroneous, XML instructions.
source: https://www.bennadel.com/blog/2434-http-status-codes-for-invalid-data-400-vs-422.htm
Codes starting with 4 (4xx) are meant for client errors. Maybe 400 (Bad Request) could be suitable to this case? Definition in http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html says:
"The request could not be understood by the server due to malformed syntax. The client SHOULD NOT repeat the request without modifications. "
409 Conflict could be an acceptable solution.
According to: https://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
The request could not be completed due to a conflict with the current state of the resource. This code is only allowed in situations where it is expected that the user might be able to resolve the conflict and resubmit the request. The response body SHOULD include enough information for the user to recognize the source of the conflict. Ideally, the response entity would include enough information for the user or user agent to fix the problem; however, that might not be possible and is not required.
The doc continues with an example:
Conflicts are most likely to occur in response to a PUT request. For example, if versioning were being used and the entity being PUT included changes to a resource which conflict with those made by an earlier (third-party) request, the server might use the 409 response to indicate that it can't complete the request. In this case, the response entity would likely contain a list of the differences between the two versions in a format defined by the response Content-Type.
In my case, I would like to PUT a string, that must be unique, to a database via an API. Before adding it to the database, I am checking that it is not already in the database.
If it is, I will return "Error: The string is already in the database", 409.
I believe this is what the OP wanted: an error code suitable for when the data does not pass the server's criteria.
I recommend using 418 when client request something absurd that the server can't process. Like the server is a teapot but client is requesting coffee kind of stuff. Here is all the (400–499) client side error messages: https://developer.mozilla.org/en-US/docs/Web/HTTP/Status#client_error_responses
404 - Not Found - can be used for The URI requested is invalid or the resource requested such as a user, does not exists.