I want to use rebar3 with erlang 24. The problem is, that if I install the newest rebar3 version I get the necessity for erlang 25. So I installed erlang 24 first but it did not change anything. I tried to install older rebar3 version with whom erlang 24 is compatible but so far nothing has worked.
I tried port and brew, but they show me only rebar 19 is available for downloads.
When I clone the new rebar3 version from git, and switch to an old commit from rebar16 I cannot install it. Does anyone have any ideas what could work?
Get rid of your existing homebrew erlang (if any) then use kerl to install erlang, and finally build rebar3 from source. The thing I like about kerl is you can easily switch between multiple erlang installations. Here's the jist of it...
brew unlink erlang
cd ~/
curl -O https://raw.githubusercontent.com/kerl/kerl/master/kerl
chmod a+x kerl
./kerl build 24.3.4.7 24.3
mkdir kerlbins
./kerl install 24.3 ~/kerlbins/24.3
. ~/kerlbins/24.3/activate
git clone https://github.com/erlang/rebar3.git
cd rebar3/
./bootstrap
./rebar3 local install
Related
I just updated XCode and the command line tools to 11.4. Now when I run svn it says "svn: error: The subversion command line tools are no longer provided by Xcode". The release notes say "Command line tool support for Subversion — including svn, git-svn, and related commands is no longer provided by Xcode. If you need Subversion or related command line tools the you need to install the Command Line Tools package by running xcode-select --install." I seem to be in a loop here, as the tools are installed. Has anyone experienced this problem and resolved it?
macOS Catalina
I had the same issue after upgrading to Catalina 10.15. It's clearly mentioned in the Apple website that SVN is deprecated in Xcode 11:
You can find it here: https://developer.apple.com/documentation/macos_release_notes/macos_catalina_10_15_release_notes
Command line tool support for Subversion — including svn, git-svn, and related commands — is no longer provided by Xcode.
The solution is to install the standalone Command Line Tools package instead:
sudo rm -rf /Library/Developer/CommandLineTools
followed by:
sudo xcode-select --install
This will replace the bundled Command Line Tools with the standalone package.
If it doesn't work for you then try to install it with brew.
brew install svn
brew is a package manager for MacOS so if you don't have it installed then you can simply install it: https://brew.sh/
macOS Big Sur
I faced the same issue Today (16th November 2020) after upgrading to MacOS Big Sur. I was able to fix it by installing the SVN again using brew install svn command.
If you faced permission errors after running above command, you can fix it by running following command.
sudo chown -R $(whoami) /usr/local/*
brew install svn
in Xcode 11.4. Svn has been removed.
I had same issue from Netbeans and have done the following from command line and now all fine
sudo xcode-select --install
/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install.sh)"
brew install svn
Coming from a FreeBSD background we elected to install SVN via MacPorts which is akin to FreeBSD Ports. So basically one would first need to install MacPorts and then install SVN as follows:
sudo port install subversion
Some details -
Install MacPorts: https://www.macports.org/install.php
Install SVN: https://trac.macports.org/wiki/howto/Subversion
It took less than five(5) minutes and works well for us.
I switched to SVNKIT which works very well for my purposes. Since I'm doing a lot of Java development is no drawback for me that SVNKIT is based on Java.
The big advantage is that SVNKIT will still work even if Apple throws SVN out completely.
I found svn still available on my Mac (upgraded from 10.15.x -> Big Sur, including XCode upgrade) in
/Library/Developer/CommandLineTools/usr/bin/svn
In the Apple Developers forum I read the suggestion to make an alias, which worked for me. However, considering svn is being dropped by Apple, this will probably not work on new installs, but it could be useful for those of us that just want it to work for now after upgrading.
alias svn=/Library/Developer/CommandLineTools/usr/bin/svn
Note: I found it easier to just make a symbolic link to svn:
ln -s /Library/Developer/CommandLineTools/usr/bin/svn /usr/local/bin/svn
my mac os version is macOs Catalina 10.15.5,I try
sudo rm -rf /Library/Developer/CommandLineTools
sudo xcode-select --install
brew install svn
but it not work.so I try to install with source code.It's work!
tar xvf subversion-1.14.0.tar.gz
cd subversion-1.14.0
./configure --with-apr=/usr/local/opt/apr --with-apr-util=/usr/local/opt/apr-util
make
now,you can find it in /usr/local/bin/
Based partly on the other answers here, I built from source with this procedure:
Download & unpack svn source tarball (NOT zip file!) from
https://subversion.apache.org/download.cgi
cd subversion-1.14.0
./get-deps (this seems to have downloaded apr and apr-util but not
built them)
cd apr
sudo mkdir /usr/local/opt
(because I did not already have such a directory on a fresh Mac)
./configure --prefix=/usr/local/opt/apr
make
make test
(saw lots of "OK" and "SUCCESS", plus one failure in "testsock")
sudo make install
cd ../apr-util
./configure --prefix=/usr/local/opt/apr-util --with-apr=/usr/local/opt/apr
cd ..
make
./configure --with-apr=/usr/local/opt/apr --with-apr-util=/usr/local/opt/apr-util --with-lz4=internal --with-utf8proc=internal
make
sudo make install
The top instructions (removing the command line tools, xcode-select --install, and brew install svn) worked for me (Monterey, 12.5.1, on an M1 pro). Thanks!
However, after I did the brew install, I had to manually remove the old svn version from /opt/local/bin before the new version would run. (discovered with $ which svn). Might be the result of migrating from the old laptop to the new one.
Can you tell me how to install valgrind on yosemite? When I try to install it i get " checking for the kernel version... unsupported (14.0.0)
configure: error: Valgrind works on Darwin 10.x, 11.x, 12.x and 13.x (Mac OS X 10.6/7/8/9) "
There is no official path or update, and I didn't found anything (except http://comments.gmane.org/gmane.comp.kde.devel.bugs/1553705 , but they didn't resolve that problem).
As there's no stable release that supports Yosemite, you can install the latest development version with
brew install --HEAD valgrind
Whilst it may have been the case in past OS X release cycles that Valgrind took a period of time before achieving reasonable feature support, basic OS X 10.10 support is already available in Valgrind trunk due to significant work on pre-release Yosemite.
From the mailing list:
There has been some effort recently to improve Valgrind's support for
Yosemite. If you develop on Mac OS, you might like to try out the
trunk (svn co svn://svn.valgrind.org/valgrind/trunk) and report any
breakage you get. Support for Yosemite is good enough that at least
one large graphical application (Firefox) runs OK. Support for the
previous release, 10.9 (Mavericks), is also substantially improved.
Note that the work has targetted 64 bit processes only. 32 bit might
work, and probably better on Mavericks, but I suspect it will be
increasingly problematic on Yosemite due to Valgrind's 32 bit x86
instruction set support not having progressed passed SSSE3.
Julian Seward
http://sourceforge.net/p/valgrind/mailman/message/33047840/
Full disclosure: I'm one of the new Valgrind developers who contributed patches to support OS X 10.10
Valerio's svn workflow will download every branch which is time and resource consuming. A better procedure is to download just the trunk:
svn co svn://svn.valgrind.org/valgrind/trunk valgrind
cd valgrind
./autogen.sh
./configure
make
make install
Here is my take on it. I more or less had a clean mac with xcode installed.
Got it compiling and running with the following:
# build/install autoconf/automake/libtool so that 'autogen' works
curl -OL http://ftpmirror.gnu.org/autoconf/autoconf-2.69.tar.gz
tar -xzf autoconf-2.69.tar.gz
cd autoconf-2.69
./configure && make && sudo make install
cd ..
curl -OL http://ftpmirror.gnu.org/automake/automake-1.14.tar.gz
tar -xzf automake-1.14.tar.gz
cd automake-1.14
./configure && make && sudo make install
cd..
curl -OL http://ftpmirror.gnu.org/libtool/libtool-2.4.2.tar.gz
tar -xzf libtool-2.4.2.tar.gz
cd libtool-2.4.2
./configure && make && sudo make install
cd ..
svn co svn://svn.valgrind.org/valgrind/trunk valgrind
cd valgrind
./autogen.sh
# important: configure-params, otherwise make ends in errors
./configure -disable-tls --enable-only64bit --build=amd64-darwin
make
# sudo, otherwise it fails due to permissions
sudo make install
Note that callgrind_control (from valgrind-3.11.0 SVN) doesn't appear to work on OS X, looks like a perl-script and the commandline tool which it runs (vgdb -l) prints something 'unexpected' which that script doesn't correctly parse ( so it won't be able to find the other process running with valgrind ).
Alternatively, the perl script just calls vgdb, we can also directly do that ( just figure out your process-id manually):
vgdb --pid=2858 instrumentation on
Worked for me on 10.10.1 :
svn co svn://svn.valgrind.org/valgrind
cd valgrind
./autogen.sh
./configure
make
make install
All of the solutions listed here failed for me. What finally ended up working was to use mac ports.
sudo port install valgrind-devel
Here's how to install it using alternative sources besides the official svn (because it seems to be intermittently available).
https://crispyappstudiosblog.wordpress.com/2015/07/07/installing-valgrind-on-osx-yosemite/
1) Navigate to this git mirror of the svn and download the latest
available version: http://repo.or.cz/w/valgrind.git
2) You need VEX as well, so grab the latest version here:
http://repo.or.cz/w/vex.git
3) Extract both of them. Put the entire contents of the VEX folder
into a folder called VEX in the top level of the valgrind directory.
cd to the valgrind directory, and execute the following:
Run ./autogen.sh
Run ./configure
Run make
Run sudo make install
Test it out by running valgrind --version You should be running at
least 3.11.0 SVN for it work on Yosemite.
I installed it on my mac by installing homebrew and then running this 3 commands in the terminal.
brew update
brew doctor
brew install --HEAD valgrind
PS: I have Os X El Capitan (10.11) but this should work with previous versions too.
I finally got Valgrind to work on my OSX El Capitan 10.11.12.
User Kalmiya's answer worked for me first after I installed Xcode commandline tools.
Type this in the terminal:
xcode-select --install
Now follow Kalmiya's post, step by step.
https://stackoverflow.com/a/30366798/3633475
Here is another take on the svn install. The previous ones did not work for me, since I needed to have automake and autoconf installed, which I did not, even though I had the latest version of the Xcode command line tools installed.
I got the following from this site. I also had to link automake and autoconf after doing brew install automake and brew install autoconf by doing brew link automake and brew link autoconf for this to work.
# Check out their repo...
$ svn co svn://svn.valgrind.org/valgrind/trunk valgrind-trunk
# and hop into it.
$ cd valgrind-trunk
# You need to have autoconf and automake installed to build Valgrind
# This example uses Homebrew to install these dependencies
# (MacPorts should also work)
# (Permission error? add sudo!)
$ brew install automake
$ brew install autoconf
# run autogen.sh in valgrind-trunk
$ ./autogen.sh
# Tricky, there are some hard wired paths in the Valgrind sources.
# You need to symlink the mach folder in your XCode SDK to /usr/include/mach
# Be sure to use the proper Xcode SDK "MacOSX10.10.sdk" in the path!
$ ln -sv /Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.10.sdk/usr/include/mach /usr/include/mach
# Run configure + set install paths in valgrind-trunk
$ ./configure --prefix=/usr/local
# Run Make and make install (permission error? add sudo!) in valgrind-trunk
$ make
$ make install
# Check it works
$ valgrind --version
valgrind-3.11.0.SVN
I have used kalmiya's instructions to build valgrind as a conda package for OSX Yosemite. For those who work with anaconda/conda, just do
conda install -c https://conda.binstar.org/groakat valgrind
Side-note:
I needed to install the command line tools as described below to get valgrind compiled.
https://stackoverflow.com/a/30471647/2156909
I got valgrind on Yosemite compiled, but had to use a hack to do so. While I think you should be using xcode-select install to get all command line tools (after which valgrind should make properly), but if you don't want to do this (eg. size of Xcode tools too big), you can also get the Darwin OSX code and copy the following files to /usr/include/mach
mach_vm.defs
task.defs
thread_act.defs
vm_map.defs
This allowed a clean compile and install, although note it is a rather slack hack.
I've updated my Mac OS X to Yosemite, but doing that I over write all my dev environment. So now, to run Laravel 4 on my local apache I need to install the Mcrypt extension, but everything that i've tried i fail. Even the steps that have worked on OS X Mavericks (10.9)
Anybody has the same issue?
Thanks in advance.
Cheers
I just installed it right now on my Mavericks installation using homebrew and it worked surprisingly well. Can't say whether or not it will work so well on Yosemite but worth a shot..
Homebrew
brew install autoconf
brew install mcrypt
Macports
Check PHP version
php -v
Update Macports
sudo port -v selfupdate
Download & install the appropriate version..
sudo port install php55-mcrypt
now dummy proof it..
Find where Macports put the file mcrypt.so and copy it to all instances of /php/extensions/no-debug-... folder. If you have that directory structure in multiple places, copy it to all of them. So every php/extensions/no-debug.. folder on your computer has a copy of mcrypt.so
sudo cp /opt/local/lib/php/extensions/no-debug-non-zts-20090626/mcrypt.so /usr/lib/php/extensions/no-debug-non-zts-20090626/
Determine where your php.ini file is and make sure it's the one your actually using because you may have this file in more than 1 place. Do this to all php.ini files you find..
Within that file find and uncomment the following line. If it's commented out, uncomment it. If it's not in the file at all, add it. In my default php.ini file I found this on line 536:
extension=mcrypt.so
Compile
Download mcrypt
curl -O http://downloads.sourceforge.net/project/mcrypt/Libmcrypt/2.5.8/libmcrypt-2.5.8.tar.gz
Uncompress it
tar -zxvf libmcrypt-2.5.8.tar.gz
Configure, build, and install
./configure && make && sudo make install
Download Autoconf
curl -O http://ftp.gnu.org/gnu/autoconf/autoconf-latest.tar.gz
Uncompress it
tar xvfz autoconf-latest.tar.gz
Configure, build, and install
./configure && make && sudo make install
Apache
Regardless which method you used to install it. You should always restart Apache when your done.
Restart Apache
sudo apachectl restart
I just did these and it installed. MAMP etc. is not installed.
brew tap josegonzalez/homebrew-php
brew install php55-mcrypt
And weirdly, I had to reinstall to make it install properly.
brew reinstall php55-mcrypt
However, this also re-installed PHP5.5 from source, but no matter, all is working fine on my end.
I had the same problem. But, I'm using MAMP for my local development. So, I just needed to symlink the php file over to MAMP's version and all is working.
If using homebrew, try reinstalling or relinking your php install.
I'm sure I can help you get back up and working, so just let me know if that doesn't help.
First Install libtool from homebrew, which is a dependency in 10.10 Yosemite
brew reinstall libtool --universal && brew unlink libtool && brew link libtool
Then CD to your php directory
cd /usr/local/php5
And into your php.d directory
cd php.d
Then finally do a quick ls to see which extensions you are using:
ls -l
If you see duplicate entries containing "mcrypt" you will need to open one of them up, and comment out the line:
extension=mcrypt.so
to
;;extension=mcrypt.so
But only in one of them. For me it was mcrypt.ini. So..
sudo nano mcrypt.ini
added the line and done!
I am trying to install ROOT (cern.root.ch). When I run ./configure , I get a message that libX11 is missing and must be installed.
I did some research and found that I need to install
) XQuartz (I already have the latest version.)
) Command line tools in Xcode.
I tried installing Command Line Tools from apple's developer website. The installation goes through smoothly but how do I know whether it has been installed? I still get libX11 missing error with root's configure command.
I also tried xcode-select --install and it once went through smoothly and then later again gives error saying this package is no longer maintained - or something of that sort.
I understand I may have multiple installations... But I am still facing the problem of not having libX11 and not being able to install ROOT.
Thanks,
Hershal.
This link and the one referenced in it suggests you use homebrew (brew) to install it
$ ruby <(curl -fsS https://raw.github.com/mxcl/homebrew/go)
$ brew doctor
Remember to add the Homebrew directory to your PATH by adding the directory (found with brew --prefix) to your .bashrc, .zshrc or whatever shell file you’re using (.bashrc is the OS X default). We’ll also add the XQuartz binaries to the PATH in case anything needs them in the future.
export PATH=/usr/local/bin:/opt/X11/bin:$PATH
Start a new Terminal session to pick up the changes.
Now that Homebrew is installed, we can use it to install the required dependencies. Each may take some time as Homebrew generally compiles from source.
$ brew install gfortran # Fortran compiler
$ brew install python # Python interpreter
$ brew install pcre # Regular Expressions library
$ brew install fftw # Fast Fourier Transforms
$ brew install cmake # Cross-platform make
install root
$ brew tap homebrew/science
$ brew install --with-cocoa root
You don't say whether you have installed XCode as well as the commandline tools but I think you will need it
I did svn --version on command line and it says it is 1.17.10.
I want to uninstall it completely, so I can re-install 1.16.12
How do I do that in OS X?
Thanks
As said Mike Christensen, in order to uninstall it, you just need to delete the binary. Run which svn to know where your binary is installed.
In order to install subversion, you need to:
Download it.
Uncompress it (tar xzf subversion-1.x.y.tar.gz).
Compile it (./configure && make).
Install it (sudo make install).
I’m pretty sure this will install it in /usr/local/bin. So if you want svn to call the subversion you just installed (instead of the one built in XCode), you need to edit your $PATH so that /usr/local/bin is before /usr/bin. On Mac OS X, editing the path is done by editing the file /etc/paths.
Note that steps 3 and 4 requires a compiler and make. The easiest way to get those on Mac OS X is to install XCode.
If you get any error in following Etienne Miret solution so the following
after setp 3
brew install apr
brew install apr-util
/configure --with-apr=/usr/local/Cellar/apr/1.5.2_3/ --with-apr-util=/usr/local/Cellar/apr-util/1.5.4_4 && make
sudo make install
After completion, you can see the new SVN installed here
/usr/local/bin/svn --version