The gems code_teams, code_ownership should allow one to tag files/whole folders by team name but after adding them to my project, running bundle install etc, I still encounter the same error
Passed `nil` into T.must
sample team file (placed in config/teams as advised) is as following
name: Smurfs
owned_globs:
- folder/folder2/**/*
The code where I try to use the info is :
x = CodeOwnership.for_backtrace(e.backtrace)
Turns out the path was not in the format expected.
The path should not end with /*
Related
I'm trying to setup Facebook Duckling on Windows 10.
When I execute: stack exec duckling-example-exe it produces the following error:
duckling-example-exe.EXE: /etc/zoneinfo/: getDirectoryContents:findFirstFile: does not exist (The system cannot find the path specified.)
I don't understand why I'm getting this error since I followed the recommendation on this GitHub thread which suggests replacing "/usr/share/zoneinfo/" in Duckling/exe/ExampleMain.hs with a link to a folder containing the zoneinfo files. You can see I replaced the path as suggested in the screenshot below:
I also tried adding a double slash as seen below - but it didn't help:
I tried with forward slash instead but this didn't help either:
Moreover, I don't understand where the path: /etc/zoneinfo/ is coming from, if the path is no longer present in ExampleMain.hs? Where is the compiler pulling the path from?
Thanks!
You need to run stack exec duckling-example-exe in the directory where the stack.yaml and project.yaml files of the duckling source code is that you are trying to modify. Otherwise it will use the version of duckling from stackage without your changes.
I have built a stanza to remove a ruby gem package from our servers. The problem is that the ruby gem executable is installed in different paths on the servers, so on one server it could be in /opt/ruby/bin/gem on other servers it's in /usr/local/rvm/rubies/ruby-2.0.0-p353/bin/gem
My stanza uses the generate function in puppet to pull out the default ruby gem installation as follows:
$ruby_gem_location = generate('which', 'gem')
exec { "remove-remote_syslog":
command => "gem uninstall remote_syslog",
path => "$ruby_gem_location:/opt/ruby/bin:/usr/bin:/usr/sbin",
onlyif => "$ruby_gem_location list|grep remote_syslog"
}
When I run puppet agent I get the following error:
Generators must be fully qualified at ****redacted*
I have also tried to provide a default path for the which command as follows:
$ruby_gem_location = generate('/usr/bin/which', 'gem')
and now the error says : Could not evaluate: Could not find command '/usr/bin/gem
I checked the target server and the gem command is in
/usr/local/rvm/rubies/ruby-2.0.0-p353/bin/gem
What am I doing wrong?
How can I pull out the default ruby gem location on our servers?
Thank you in advance
Your code
$ruby_gem_location = generate('/usr/bin/which', 'gem')
will generate a full path to your gem command (if it succeeds). From the result you describe, I think it is generating '/usr/bin/gem', which is perhaps a symlink to the real gem command. You are putting that into your command path instead of just the directory part, and that will not be helpful. It is not, however, the source of the error message you report.
The real problem here is that generate(), like all DSL fucntions, runs during catalog building. I infer from your results that you are using a master / agent setup, so generate() is giving you a full path to gem -- evidently /usr/bin/gem -- on the master. Since the whole point is that different servers have gem installed in different places, this is unhelpful. The actual error message arises from an attempt to execute your onlyif command with the wrong path to gem.
Your best way forward is probably to create a custom fact with which each node can report the appropriate location of the gem binary. You can then use that fact's value in your Exec, maybe:
exec { "remove-remote_syslog":
command => "$::ruby_gem_path uninstall remote_syslog",
onlyif => "$::ruby_gem_path list | grep remote_syslog"
}
Note that you don't need a path attribute if you give a complete path to the executable in the first place.
Details on creating the $::ruby_gem_path custom fact depend on a number of factors, and in their full generality they are rather too broad for SO, but PL provides good documentation.
I have been attempting to setup a chef recipe which installs ruby using RVM and then uses the application_ruby cookbook to configure the application, however I keep running into the error
NameError: Cannot find a resource for bundle_options on ubuntu version 12.04
I am using the following code
application "application setup" do
owner "ubuntu"
group "ubuntu"
repository "https://github.com/me/myapplication.git" // Real address removed
path rails_app_path
revision "master"
rails do
bundler true
precompile_assets true
bundler_deployment true
end
end
I noticed that the bundle_options was recently added, https://github.com/opscode-cookbooks/application_ruby/commit/e7719170a661a957796e8e5d58ba8f4ecd937487 however I am unable to track down if this is causing the issue. I have included
depends "application"
depends "application_ruby"
in my metadata.rb and made sure all my dependencies are installed so I am unsure what I am doing wrong at this point.
According to documentation bundle_options is an attribute of the rails resource, not a resource itself.
The only correct way of using it is INSIDE the "rails" block, so you got the message because you either used it as :
an attribute of the application resource (but outside of the "rails" block)
standalone resource (outside of any resource).
Message you mentioned is being displayed when nonexistent resource is being referenced. e.g. if you had tried to execute following code on your system:
nonexistent_resource "failure gonna happen" do
some_attribute "whatever_value"
end
you would've got a message
NameError: Cannot find a resource for nonexistent_resource on Ubuntu version 12.04
I ran into this problem today as well. It appears the problem is that commit e771917 forgot to add the necessary getter for the bundle_option. Someone filed a PR to fix it (https://github.com/poise/application_ruby/pull/44), but it has not yet been merged. I can confirm that when I made that change locally, this error went away. The forked branch in the PR is located at https://github.com/mauriciosilva/application_ruby/tree/bundle_options_fix.
So here's what I'm attempting to do. I'm building an ember.js application, with a java backend running on GAE.
I'm using handlebars, but I want them divided up into separate files, not just all pasted into the index.html.
Via the ember.js irc I was turned on to rake-pipeline along with minispade
Along with the web filters and a custom handlebars filter I started building the assetfile. I don't know Ruby, or gem files, etc.
So I'm trying to figure out the best way to be able to compile my coffeescript/handlebars files on the fly, minispade them, but keep the individual files accessible while in dev mode so I can debug them. What makes that hard is that the rake pipeline is running on a different port than GAE. So I'm not sure exactly how to handle this. Do I make my index file in GAE point to individual files at the 9292 port (rakep) during development, but in production mode point to the fully concatenated version? I'm not sure.
So I was attempting to do that here: https://gist.github.com/1495740 by having only one section that was triggered by the 'build' flag. Not even sure if that works that way.
I know there's a lot of confusion here. Apologies, like I said I'm not even remotely familiar with the Ruby style of doing things.
Since you're not a Ruby person, here are the most reliable steps for getting a stock OSX environment set up with rake pipeline:
Step 1: Install bundler
# on OSX, using built-in Ruby
$ sudo gem install bundler --pre
Step 2: Create a Gemfile
# inside your app directory
$ bundle init
# will create a file named Gemfile in the root
Step 3: Add rake-pipeline to the Gemfile
# inside the Gemfile
gem "rake-pipeline-web-filters"
Step 4: Install your gems
$ bundle install --binstubs
Step 5: Set up Assetfile
However you were already doing it...
Step 6: Run Rake::Pipeline
# to run the preview server
$ bin/rakep
# to build your assets
$ bin/rakep build
Rake::Pipeline.build is the method that evaluates an Assetfile. You can imagine that your entire Assetfile is wrapped inside a Rake::Pipeline.build {} block; you shouldn't ever need to write one inside an Assetfile.
Some of the filters in the docs are hypothetical, most of those docs were written before there were any filters at all. A CoffeeScript compiler has been recently added, though.
As to your main question, I'm not sure there's a clean way to do it with the current rakep implementation. An Assetfile is just Ruby, though, so it's possible to hack something together that should work. Here's how I would write yours:
require "json"
require "rake-pipeline-web-filters"
require "rake-pipeline-web-filters/helpers"
class HandlebarsFilter < Rake::Pipeline::Filter
def initialize(&block)
block ||= proc { |input| input.sub(/\.handlebars$/, '.js') }
super(&block)
end
def generate_output(inputs, output)
inputs.each do |input|
output.write "return Ember.Handlebars.compile(#{input.read.to_json})"
end
end
end
# process all js, css and html files in app/assets
input "assets"
# processed files should be outputted to public
output "public"
# process all coffee files
match "**/*.coffee" do
# compile all CoffeeScript files. the output file
# for the compilation should be the input name
# with the .coffee extension replaced with .js
coffee_script
# The coffee_script helper is exactly equivalent to:
# filter Rake::Pipeline::Web::Filters::CoffeeScriptCompiler
end
match "**/*.js" do
minispade
if ENV['RAKEP_ENV'] == "production"
concat "application.js"
else
concat
end
end
match "**/*.handlebars" do
filter HandlebarsFilter
minispade
concat "templates.js"
end
The if ENV['RAKEP_ENV'] bit reads an environment variable to decide whether to concatenate your JS to a single file.
So now you can run RAKEP_ENV="production" rakep build for a concatenated build, or just rakep build for a development build.
I'm trying to get assetics running with the yui compressor and, if this is running, sass. Right now, both don't work. When removing all filters from config.yml and the twig template, it works and php app/console assetic:dump does copy the css and js files.
Now I want to add the yui compressor and my config.yml looks like this:
assetic:
debug: %kernel.debug%
use_controller: false
filters:
yui_js:
jar: %kernel.root_dir%/Resources/java/yuicompressor-2.4.6.jar
Adding the filter to the template and running assetic:dump again ends in the following error (translation of message by me):
[RuntimeException]
The syntax for filename, directory name or drive name is wrong
I found an article telling me to specify the path to java.exe, so I add this to config.yml:
assetic:
..
java: C:/Program Files (x86)/Java/jre6/bin/java.exe
..
Now assetic:dump tells me:
[RuntimeException]
The COMMAND "C:/Program" is either written wrong or
I tried playing around with both variables (using \ or \ instead of /, adding single or double quotes, working with short alias Progra~1 or Progra~2) in the config, but I didn't get anywhere. The both errors comming up all the time. Maybe someone can point me in the right direction.
Ok, I figured it out. Man, this one was brutal.
Let's start with the easy stuff. A working version of the config.yml can look like this:
assetic:
debug: false
use_controller: false
java: C:\Program Files (x86)\Java\jre6\bin\java.exe
sass: C:\Program Files (x86)\Ruby192\bin\sass.bat
filters:
scss: ~
yui_js:
jar: %kernel.root_dir%\Resources\java\yuicompressor-2.4.6.jar
For some reason, assetic is always importing a whole directory for scss, so I had to make a combine.scss which imports the other scss files in the correct order.
And now it gets ugly, as one have to change the assetics core in order to get this working. The developers of assetic know this bug and I think it is fixed in some development trunk/branch but not the stable one.
The Assetic\Util\ProcessBuilder has to be changed on line 95
if (defined('PHP_WINDOWS_VERSION_MAJOR')) {
,line 103
$script .= ' '.implode(' ', array_map('escapeshellarg', $args));
and line 110
return new Process($script, $this->cwd, null, $this->stdin, $this->timeout, $options);
I hope this bug get fixed soon and till then anybody trying to get it working finds this thread... Took me like 8 hours of debuging, reading and trying different approaches.
Answer by Boo Nov 19 at 22:53 did work for me by changing everything he mentioned in Assetic\Util\ProcessBuilder (I ignored line 95 as it looks the same as in my file)
Now it works on windows. Thanks!
Just to confirm. Im using Symfony 2.0.7 and yuicompressor-2.4.7
For other users who use window server 2008 r2 :
Maybe you should change the C:\windows\Temp folder property to 777 (read/write) for the IIS user / or the machine's normal user
please unpack the ruby.7z from rubyinstaller.org , and go to C:\_ruby193\bin , in this unpack position you should exec the CMD prompt , type :
ruby -S gem install sass
so that you will get the sass.bat in that position
It's time to use Boo's best answer , and please notice that in symfony2 dev env maybe it's not necessary to change the use_controller to false (in the config.yml) , because there's another use_controller in the config_dev.yml (set to true) , and in routing_dev.yml there's also a _assetic router , they're perhaps associated.