I really hope that someone could help me out with my problem.
I want to start an exe File (VSeeFace - see https://www.vseeface.icu for more information) on my Mac with wineskin. VseeFace is an application for Vtubing.
The application starts normally via Wineskin, but as soon as I try to open my avatar (a .vrm file), the software stops and I don't know why. I have searched everywhere and found nothing about my problem, but perhaps that is also due to my limited knowledge of development skills.
Can anyone help me please?
My Mac:
MacOS Monterey Version 12.4
Radeon Pro 575X 4 GB
My Wineskin Setup:
Wrapper Version Wineskin 2.9.1.5
Engine WS11WineCX64Bit22.0.1-1
Config Utility - Windows-Version 8
VseeFace Software – https://www.vseeface.icu/#download
They also describe how it will work on Linux or maybe Mac,
https://www.vseeface.icu/#running-on-linux-and-maybe-mac
For the Facetracking I run OpenSeeFace (but that seemed to work, I could see the green light of the iMac camera, but I couldn't test it because of my software problem).
I mean I could run the application but on the most important Screen it stops working.
In the debug.log file I noticed the following messages:
0024:err:shell:HCR_GetFolderAttributes should be called for simple PIDL's only!
0024:fixme:exec:SHELL_execute flags ignored: 0x0000000c
0118:err:module:import_dll Library dsound.dll (which is needed by L"C:\windows\system32\devenum.dll") not found
0118:trace:loaddll:build_module Loaded L"C:\windows\system32\msdmo.dll" at 000000034ABC0000: builtin
0118:err:ole:apartment_add_dll couldn't load in-process dll L"C:\windows\system32\devenum.dll"
0118:err:ole:com_get_class_object no class object {62be5d10-60eb-11d0-bd3b-00a0c911ce86} could be created for context 0x1
0118:err:module:import_dll Library dsound.dll (which is needed by L"C:\windows\system32\devenum.dll") not found
0118:err:ole:apartment_add_dll couldn't load in-process dll L"C:\windows\system32\devenum.dll"
0118:err:ole:com_get_class_object no class object {62be5d10-60eb-11d0-bd3b-00a0c911ce86} could be created for context 0x1
0118:err:ole:apartment_add_dll couldn't find function DllGetClassObject in L"C:\windows\system32\devenum.dll"
0118:err:ole:com_get_class_object no class object {62be5d10-60eb-11d0-bd3b-00a0c911ce86} could be created for context 0x1
0118:err:ole:com_get_class_object no class object {62be5d10-60eb-11d0-bd3b-00a0c911ce86} could be created for context 0x1
0118:trace:loaddll:build_module Loaded L"C:\windows\system32\Avrt.dll" at 00000002F2930000: builtin
0118:trace:loaddll:build_module Loaded L"C:\VSeeFace\VSeeFace_Data\Plugins\x86_64\LeapCV4.dll" at 000000010A220000: native
0118:trace:loaddll:build_module Loaded L"C:\windows\system32\VCRUNTIME140_1.dll" at 00000002F7F20000: builtin
0118:err:module:import_dll Loading library MSVCP140_2.dll (which is needed by L"C:\VSeeFace\VSeeFace_Data\Plugins\x86_64\LeapCV5.dll") failed (error c000007b).
0118:trace:loaddll:build_module Loaded L"C:\VSeeFace\VSeeFace_Data\Plugins\x86_64\CONCRT140.dll" at 0000000104CA0000: native
0118:err:module:import_dll Loading library MSVCP140_2.dll (which is needed by L"C:\VSeeFace\VSeeFace_Data\Plugins\x86_64\LeapCV5.dll") failed (error c000007b).
[mvk-info] Created 2 swapchain images with initial size (1280, 720) and contents scale 1.0 for screen Integriertes Retina-Display.
[mvk-error] VK_ERROR_INITIALIZATION_FAILED: Render pipeline compile failed (Error code 2):
Vertex attribute v4(4) of type int4 cannot be read using MTLAttributeFormatUInt4.
0118:trace:loaddll:build_module Loaded L"C:\VSeeFace\UnityPlayer.dll" at 0000000180000000: native
0118:fixme:thread:get_thread_times not implemented on this platform
0118:trace:loaddll:build_module Loaded L"C:\windows\system32\mmdevapi.dll" at 0000000336850000: builtin
0118:trace:loaddll:build_module Loaded L"C:\windows\system32\winecoreaudio.drv" at 00000001C92D0000: builtin
0118:fixme:coreaudio:ca_channel_layout_to_channel_mask Unhandled channel 0xffffffff
0
01b0:fixme:kernelbase:AppPolicyGetThreadInitializationType FFFFFFFFFFFFFFFA, 0000000066D6FE10
01b0:trace:loaddll:build_module Loaded L"C:\windows\system32\avrt.dll" at 00000002F2930000: builtin
01b0:fixme:avrt:AvSetMmThreadCharacteristicsW (L"Audio",0000000066D6FDB8): stub
01b0:trace:loaddll:free_modref Unloaded module L"C:\windows\system32\avrt.dll" : builtin
***If needed I could post the complete log file. ***
I have installed the dlls and they are in all the folders. I have also tried the installation via Winetricks, where it displays the following message:
Executing mkdir -p /Applications/Wineskin/VSeeFace.app/Contents/SharedSupport
warning: You are using a 64-bit WINEPREFIX. Note that many verbs only install 32-bit versions of packages. If you encounter problems, please retest in a clean 32-bit WINEPREFIX before reporting a bug.
Using winetricks 20220411-next - sha256sum: 846f79cac49697fd818f06a6aebf36ca408661f89b97633e9872025b33bc0e7b with wine-7.7 (WineskinCX 22.0.1) and WINEARCH=win64
Unknown arg UnityPlayer.dll
Usage: Applications/Wineskin/VSeeFace.app/Wineskin.app/Contents/Resources/winetricks [options] [command|verb|path-to-verb] ...
Executes given verbs. Each verb installs an application or changes a setting.
Options:
--country=CC Set country code to CC and don't detect your IP address
-f, --force Don't check whether packages were already installed
--gui Show gui diagnostics even when driven by commandline
--gui=OPT Set OPT to kdialog or zenity to override GUI engine
--isolate Install each app or game in its own bottle (WINEPREFIX)
--self-update Update this application to the last version
--update-rollback Rollback the last self update
-k, --keep_isos Cache isos (allows later installation without disc)
--no-clean Don't delete temp directories (useful during debugging)
-q, --unattended Don't ask any questions, just install automatically
-r, --ddrescue Retry hard when caching scratched discs
-t --torify Run downloads under torify, if available
--verify Run (automated) GUI tests for verbs, if available
-v, --verbose Echo all commands as they are executed
-h, --help Display this message and exit
-V, --version Display version and exit
Commands:
list list categories
list-all list all categories and their verbs
apps list list verbs in category 'applications'
benchmarks list list verbs in category 'benchmarks'
dlls list list verbs in category 'dlls'
fonts list list verbs in category 'fonts'
games list list verbs in category 'games'
settings list list verbs in category 'settings'
list-cached list cached-and-ready-to-install verbs
list-download list verbs which download automatically
list-manual-download list verbs which download with some help from the user
list-installed list already-installed verbs
arch=32|64 create wineprefix with 32 or 64 bit, this option must be
given before prefix=foobar and will not work in case of
the default wineprefix.
prefix=foobar select WINEPREFIX=/Users/myusername/.local/share/wineprefixes/foobar
annihilate Delete ALL DATA AND APPLICATIONS INSIDE THIS WINEPREFIX
Winetricks Commands Finished!!
Related
I have a Windows 10 laptop where no TeX distribution was ever installed before (double-checked for config directories, files, and environment variables).
Wanting to install TeX Live 2021, I followed the full installation guide and also read the Windows-specific warnings. I've now tried several times, following different installation procedures - cleaning up everything (deleting base & user directories, environment variables, etc) before each time - but still don't manage to get a working installation. Before I report a bug at tex-live#tug, I wanted to ask for advice here, in case I'm doing something wrong. Here is what I did, step by step, and the problems I encountered in the process.
1. First I tried running the recommended online installer install-tl-windows.exe. It never got past the screen that tries to contact or load from a repository, even after a 30-min wait. Tried a dozen times, choosing different mirrors nearby and far away. No luck.
2. Then I downloaded and unpacked the install-tl.zip and run install-tl-windows.bat therein. This time the main installation window appeared. I left all default paths and environment variables (note that I do have write access to C:); in the selection scheme I unselected all languages except US & UK English, unselected XeTeX, LuaTeX, ConTeXt; also unselected TeXworks (I use Emacs), and clicked Install. After one to three hours (depending on the mirror I chose), the installation was complete.
I tried compiling a minimal latex document (see below), and got an error similar to the one in this old question:
I can't find the format file `pdflatex.fmt'
Following the advice in the answers to that question and similar questions elsewhere online such as this, I tried running texhash and fmtutil-sys --all. The latter gave the error
no appropriate script or programme found fmtutil.
for which there are also many posts online.
2a. Not understanding what the problem could be, I re-tried with all possible combinations of the following three options: (a) choosing different mirrors; (b) leaving the full selection of packages (ie without unselecting some languages, LuaTeX etc); (c) redoing the procedure by choosing "Run as Administrator". No luck.
3. At this point I tried downloading the ISO file with the full installation. Mounted the image and run install-tl-windows.bat (as normal user, as recommended; I repeat that I do have write access to C:). Everything proceeded as in step 2. above. At the end of the installation I tried running pdflatex on the minimal latex document. New error this time:
This is pdfTeX, Version 3.141592653-2.6-1.40.22 (TeX Live 2021/W32TeX) (preloaded format=pdflatex)
restricted \write18 enabled.
entering extended mode
(./minimal-template.tex
LaTeX2e <2020-10-01> patch level 4
L3 programming layer <2021-02-18>
! LaTeX Error: File `article.cls' not found.
Very strange. A file search revealed that article.cls is in the TeXLive file system; but kpathsea did not see it indeed.
4. At this point I opened the TeX Live Shell from the Start Menu; selected a CTAN mirror; updated the TL Manager which was not up to date; updated all packages; run Regenerate filename database; and run Regenerate formats. With the latter I got this error:
tex live shell:
mtutil [INFO]: total formats: 59
fmtutil [INFO]: exiting with status 53
C:\texlive\2021\bin\win32\runscript.tlu:915: command failed with exit code 53:
perl.exe c:\texlive\2021\texmf-dist\scripts\texlive\fmtutil.pl --sys --all
Here is a snip from the full set of errors appearing in the "Other" tab (I'm replacing my user directory with asterisks for privacy; note that I do have write access to these directories):
start load https://www.nic.funet.fi/pub/TeX/CTAN/systems/texlive/tlnet
finish load https://www.nic.funet.fi/pub/TeX/CTAN/systems/texlive/tlnet
start load http://contrib.texlive.info/current
finish load http://contrib.texlive.info/current
running mktexlsr ...
done running mktexlsr.
running mtxrun --generate ...
done running mtxrun --generate.
running updmap-sys ...
done running updmap-sys.
regenerating fmtutil.cnf in C:/texlive/2021/texmf-dist
running fmtutil-sys --byengine luatex --no-error-if-no-format --no-error-if-no-engine=luajithbtex,luajittex,mfluajit --status-file=C:\Users\***\AppData\Local\Temp\rPSb0Dpak2\WW_dJvUHgX ...
tlmgr.pl: fmtutil-sys --byengine luatex --no-error-if-no-format --no-error-if-no-engine=luajithbtex,luajittex,mfluajit --status-file=C:\Users\***\AppData\Local\Temp\rPSb0Dpak2\WW_dJvUHgX failed (status 255), output:
Unknown option: status-file
Try "fmtutil --help" for more information.
C:\texlive\2021\bin\win32\runscript.tlu:915: command failed with exit code 255:
perl.exe c:\texlive\2021\texmf-dist\scripts\texlive\fmtutil.pl --sys --byengine luatex --no-error-if-no-format --no-error-if-no-engine=luajithbtex,luajittex,mfluajit --status-file=C:\Users\***\AppData\Local\Temp\rPSb0Dpak2\WW_dJvUHgX
running fmtutil-sys --byengine luajithbtex --no-error-if-no-format --no-error-if-no-engine=luajithbtex,luajittex,mfluajit --status-file=C:\Users\***\AppData\Local\Temp\rPSb0Dpak2\WW_dJvUHgX ...
I tried to continue anyway with Regenerate fontmaps, and then tried again pdflatex on the minimal document. New error:
This is pdfTeX, Version 3.141592653-2.6-1.40.23 (TeX Live 2021/W32TeX) (preloaded format=pdflatex)
restricted \write18 enabled.
---! c:/texlive/2021/texmf-var/web2c/pdftex/pdflatex.fmt made by different executable version
(Fatal format file error; I'm stymied)
5. I tried again steps 3. and 4., but with "Run as Administrator". Same errors.
OK at this point I give up and really don't know what to do. Am I doing something wrong? For the moment I have to concur with this post: installation of TeX Live 2021 is an utter failure.
Here is the minimal latex file I used for testing (copy & paste):
\documentclass{article}
\begin{document}
test
\section{Section}
test
\end{document}
Found, that the download is not working because the system path to "cmd.exe" is not found. Therefore: open a cmd window and add the system path prior to starting the .bat file (set PATH=%PATH%;C:\Windows\system32)
I have followed step by step the tutorial to install Veins, but when I tried running the example scenario (final step) I ended up with the above error.
The whole error was:
Error in module (cModule) RSUExampleScenario (id=1) during network
setup: Class "Veins::ObstacleControl" not found -- perhaps its code
was not linked in, or the class wasn't registered with
Register_Class(), or in the case of modules and channels, with
Define_Module()/Define_Channel().
TRAPPING on the exception above, due to a debug-on-errors=true
configuration option. Is your debugger ready?
Simulation terminated with exit code: -2147483645 Working directory:
C:/Users/user/src/veins-4.3/examples/veins Command line:
../../../omnetpp-4.6/bin/opp_run.exe -r 0 -n .;../../src/veins
--tkenv-image-path=../../images -l ../../src/veins omnetpp.ini
I don't think I have missed a step during the tutorial as I have tried it two times. I did not make any change in anything, I've just strictly followed the tutorial like a robot, so I cannot provide an MCVE with more details than the tutorial.
Here is what I'm using:
- Windows 7 Pro 64 bits
- SUMO 0.25.0 64 bits
All other steps of the tutorial successfully worked until the final step.
I assume this error occurs when running Veins via the OMNeT++ IDE. Or, if you have compiled it with GCC (The error does not happen if you use CLANG)
There are two ways to bypass this error:
Use the .run as executable from your examples directory, which calls veins/run and includes all the required libraries:
Use opp_run as executable and set dynamic libraries to the directory where libveins.so is located (usually src/veins)
PS: to answer #ChristopSommer questions: Veins::ObstacleControl appears in opp_run -l src/veins -h classes
This could be a solution too, but I never tested it: Compiler flags in Eclipse
My Intent
I have an image generated by BitBake on which I'm interested in changing the window manager to metacity or maybe something similar.
My Process
I've added require recipes-graphics/images/core-image-x11.bb into my core recipe, which provides a simple Matchbox terminal window but seemingly no other functionality. If I add matchbox-desktop and matchbox-session-sato, it adds a bit more usability but not what I'm looking for.
I've included the default package from the metacity_2.34.13.bb recipe from the meta-gnome layer from the OpenEmbedded Metadata Index in the IMAGE_INSTALL variable of my core image. This installs several components including a metacity command in /usr/bin. If I run that command, I get the following message:
GLib-GIO-Message: Using the 'memory' GSettings backend. Your settings will not be saved or shared with other applications
(metacity:1124): GLib-GIO-ERROR **: Settings schema 'org.gnome.metacity' is not installed
Trace/breakpoint trap
I've navigated to /usr/share/glib-2.0/schemas and run glib-compile-schemas ., then run:
startx
metacity --replace
again. Now, the output is:
Window manager error: Unable to open X display
I haven't found a clear solution to this error which applies to my specific situation.
Update (2/29):
I may have now found a solution to this error, using these commands:
X&
export DISPLAY=:0
metacity&
At this point, I seem to be running something on one of my VTs. I can run demos like glxgears in that VT (glxgears is included in the mesa-demos recipe), but I don't know how to actually create a usable environment.
My question(s)
I'm not using much from meta-openembedded/meta-gnome (just metacity) or meta/recipes-gnome (adwaita-icon-theme, gnome-desktop3, gsettings-desktop-schemas and gtk+3), so am I missing some recipe which automates the addition of metacity?
(if not Question 1) How can I solve the error Window manager error: Unable to open X display?
The x11-common recipe adds a X session script that will run /usr/bin/x-session-manager: that is responsible for starting your desktop environment.
The way to implement a new session/DE in OE-Core is to use update-alternatives for "x-session-manager": see the matchbox-session recipe for the default implementation and mini-x-session recipe for an alternative.
mini-x-session might be modifiable for your needs so you don't need to write a new one: A /etc/mini_x/session file like this might do the trick:
# start any apps here, e.g. "my-desktop &"
exec metacity
Going from this (a running window manager) to "usable environment" might still be lots and lots of work, depending on your definition of usable.
Sorry about the vagueness of the question title, but I've been having problems compiling Firefox OS and am unsure where to turn (I know there's Bugzilla but I'm not sure if what I'm experiencing is a bug or not)
Basically, I've been trying to compile the latest Firefox OS from source using the official instructions. I'm trying to build a system that supports the languages en-GB, en-US and tr (with en-GB as the default). My .userconfig is as follows:
export MAKE=
export CC=gcc-4.6
export CXX=g++-4.6
VARIANT=user
# GAIA l10n
export GAIA_DEFAULT_LOCALE="en-GB"
export LOCALE_BASEDIR="$PWD/locales"
export LOCALES_FILE="$PWD/locales/languages_some.json"
export GAIA_KEYBOARD_LAYOUTS="en,tr"
# Gecko l10n
export L10NBASEDIR=$PWD/gecko-locales
export MOZ_CHROME_MULTILOCALE="en-GB tr"
export PATH="$PATH:$PWD/compare-locales/scripts"
export PYTHONPATH="$PWD/compare-locales/lib"
The contents of languages_some.json is as follows:
{
"en-GB" : "English (GB)",
"en-US" : "English (US)",
"tr" : "Türkçe"
}
compare_locales contains an unmodified clone of this repo, and gecko-locales contains clones of en-GB and tr locales from the official repository (there is no 'en' or 'en-US' repository).
Now, I'm not 100% sure where the error is. I have tried searching Google for any suspect lines, but nothing has come up.
I have posted full output as a GitHub Gist. Suspect lines as far as I can tell (this is my first time compiling either Firefox or a mobile phone OS) are:
2015-03-16 16:43:12: stackwalker.cc:125: INFO: Couldn't load symbols for: |
2015-03-16 16:43:12: basic_code_modules.cc:88: INFO: No module at 0x2ab95ac94aa0
(then followed by a lot of 'No module at ...' errors)
also
System JS : ERROR file:///opt/src/B2G/gaia/b2g_sdk/34.0a1-2014-08-12-04-02-01/b2g/components/nsHandlerService.js:120 - NS_ERROR_FAILURE: Component returned failure code: 0x80004005 (NS_ERROR_FAILURE) [nsIProperties.get]
This error is repeated a fair few times throughout the code, but I can't tell if it's harmless or if it's stopping the build.
There's also a bunch of lines about missing translations, but I imagine they're just harmless. I have tried to cut them down as much as possible (by adding the missing translations) but the problem persists.
Oh yes, and in case someone asks, I have been running with my phone plugged in, and it is visible on adb devices. I have also tried removing the out and backup-inari directories.
System specs, PC:
Debian Sid, mostly up-to-date, but running with an old version of make (build refuses to run on any version newer than 3.8)
GCC 4.6 and 4.9. export CC=gcc-4.6 set in .userconfig
G++ 4.6 and 4.9. export CXX=g++-4.6 set in .userconfig
Phone:
Original ZTE Open. This originally came with FFOS 1.0, but I have since upgraded to 1.1 by flashing the official ROM.
I use GTK3 , codeblcks IDE, glade3 in windows 7...
In my application i have a button which when clicked should open a gtk_file_chooser_dialog...
But gives the fillowing error..
Glib-GIO-ERROR**:No GSettings schemas are installed on the system
static void on_save_clicked(GtkWidget *widget,gpointer data)
{
GtkWidget *dialog;
//dialog=gtk_file_chooser_dialog_new("Save it",GTK_WINDOW(gtk_builder_get_object(builder,"mainwindow")),GTK_FILE_CHOOSER_ACTION_SAVE,GTK_STOCK_OK,GTK_RESPONSE_OK,GTK_STOCK_CANCEL,GTK_RESPONSE_CANCEL);
//dialog=GTK_FILE_CHOOSER_DIALOG(gtk_builder_get_object(builder,"filechooserdialog"));
gtk_widget_show_all(dialog);
gint resp=gtk_dialog_run(GTK_DIALOG(dialog));
if(resp==GTK_RESPONSE_OK)
g_print("%s\n",gtk_file_chooser_get_filename(GTK_FILE_CHOOSER(dialog)));
}
I use g_signal_connect(...) to call this function when the button is clicked...
I cannot understand the problem...
I got the very same error when trying to open a FileChooserDialog.
(lancer_ihm.py:1047004): GLib-GIO-CRITICAL **: g_settings_schema_source_lookup: assertion 'source != NULL' failed
(lancer_ihm.py:1047004): GLib-GIO-ERROR **: No GSettings schemas are installed on the system
Trace/breakpoint trap (core dumped)
I 'm running a Gtk3 interface with python3 on Linux.
Gtk3 and all its dependencies were installed from the sources.
I found the solution on this forum http://forum.tinycorelinux.net/index.php?topic=13699.0
I just set XDG_DATA_DIRS variable with the path to where the gtk schema files are located and it works.
$ ls /home/user1/ctcils/dusserm/applications/gtk/3.12.1/share/glib-2.0/schemas/
gschemas.compiled org.gtk.exampleapp.gschema.xml org.gtk.Settings.FileChooser.gschema.xml
org.gtk.Demo.gschema.xml org.gtk.Settings.ColorChooser.gschema.xml
$ export XDG_DATA_DIRS=/Produits/publics/x86_64.Linux.RH6/glib/2.40.0/share/:/home/user1/ctcils/dusserm/applications/gtk/3.12.1/share/
There are probably few errors in there.
If you commented both, the dialog.show_all () will produce error because, it hasn't been instantiate yet you asked to be shown.
If you use the first one, object Gtk.FileChooserDialog param has to end with NULL (in c), read the doc
If you use the second one, check your glade signal property in your glade window
Check your gtk installation
Quoting from this StackOverflow answer,
Seems you're not the one having this problem, and it also happens on Windows on MinGW. Luckily, that person gave a solution:
The thing, as it seems as I was running the test-widget example (that I
built with gtksourceview-3.0.0 using MSVC), was that I need to compile the
org.gtk.Settings.FileChooser.gschema.xml file (from GTK+-3.x, under
$(srcroot)/gtk) with the glib-compile-schemas utility that is from GLib,
which will generate gschemas.compiled in the same folder.
After that, place that gschemas.compiled file in the this folder:
$(parent_folder_of_the_gtk3_dll)\share\glib-2.0\schemas
and one will be set to use the gtkfilechooser without the puzzling
[GLib-GIO-ERROR **: Settings schema 'org.gtk.Settings.FileChooser'
is not installed] error.
I will add to my GLib project files to compile the glib-compile-schemas
utility and add to my GTK+-3.x project files to compile the
the org.gtk.Settings.FileChooser.gschema.xml shortly.