I am loosing a lot of time searching in internet for the following simple setting.
I installed git (and git bash) in Windows. What I want is just to open Git Bash and be in the directory I want. I don't want to change my home directory, just be in a given directory when I open the program.
More detailed, when I open Mingw / Git bash in Windows, I would like to be in the following folder:
/c/blabla/my_git_repositories
(this corresponds to the windows-style path: C:\blabla\my_git_repositories).
At the moment, I must write the following command every time I open GitBash:
cd /c/blabla/my_git_repositories
is this possible? Which file should i modify?
Actually the program is installed here:
C:\Program Files\Git\mingw64
Thanks
If you want it happening every time you start an interactive shell, add
cd /c/blabla/my_git_repositories
to your shell startup. If your install includes the manpages say man bash and find the INVOCATION section, in a decent pager just /^INV will do it. Or Google knows to interpret a search for man bash as a search for the bash manpage.
Windows doesn't ordinarily support shell logins at all so a lot of the shell's startup-circumstance detection is overkill on Windows. Executing it is extremely fast, but describing exactly how it decides takes a page or two.
The short form is, if the startup was told it's a login shell it reads the login startup files, including (your) ~/.bash_profile, which generally should check for an interactive login and if so source the normal interactive shell startup ~/.bashrc, so ~/.bash_profile should end with something like
[[ $- = *i* && -f ~/.bashrc ]] && . ~/.bashrc
and put whatever you want in ~/.bashrc. That cd, set up your prompt colors, define your favorite shell aliases, add your personal scripts directory to PATH, whatever.
Partial solution when opening the program by clicking on a link.
Right click on the link → properties → Start in: set the value to "C:\blabla\my_git_repositories".
This will work only when you open the application from that link, but could be fine (depending by your needs).
Related
I'm running IntelliJ 2018.3 on Windows 7, as well as openSUSE Leap 15.
Under Windows 7, I've configured IntelliJ to use Git Bash, i.e., in Settings, under Tools -> Terminal, I'm setting Shell path to:
C:\Program Files (x86)\Git_2.17.1\bin\bash.exe
One of IntelliJ's new features is the ability to save and reload terminal sessions (see this link).
It works perfectly with openSUSE, however, on Windows, while the terminal tab names are correctly restored, I always end up with a new shell.
Is there a way to make IntelliJ and Git Bash play well together so that I can retain the current working directory and shell history after restarting IntelliJ?
You can try and setup your Git for Windows bash to remember the last used path for you, as seen in "How can I open a new terminal in the same directory of the last used one from a window manager keybind?"
For instance:
So instead of storing the path at every invocation of cd the last path can be saved at exit.
My ~/.bash_logout is very simple:
echo $PWD >~/.lastdir
And somewhere in my .bashrc I placed this line:
[ -r ~/.lastdir ] && cd $(<~/.lastdir)
That does not depend on Intellij IDEA directly, but on the underlying bash setup (here the Git for Windows bash referenced and used by Intellij IDEA.
Here's a possible workaround. It was heavily inspired by VonC's answer, as well as other answers to the question that he mentioned.
~/.bashrc
if [[ -v __INTELLIJ_COMMAND_HISTFILE__ ]]; then
__INTELLIJ_SESSION_LASTDIR__="$(cygpath -u "${__INTELLIJ_COMMAND_HISTFILE__%history*}lastdir${__INTELLIJ_COMMAND_HISTFILE__##*history}")"
# save path on cd
function cd {
builtin cd $#
pwd > $__INTELLIJ_SESSION_LASTDIR__
}
# restore last saved path
[ -r "$__INTELLIJ_SESSION_LASTDIR__" ] && cd $(<"$__INTELLIJ_SESSION_LASTDIR__")
fi
I don't like the fact that I had to wrap the cd command, however Git Bash does not execute ~/.bash_logout unless I explicitly call exit or logout; unfortunately due to this limitation, the .bash_logout variant is inadequate for the mentioned scenario.
The workaround above also leave small junk files inside __INTELLIJ_COMMAND_HISTFILE__ parent dir, however, I couldn't do any better.
Additionally I've opened a ticket in Jetbrain's issue tracker. There are many different shells that may benefit from official support. It would be great if JetBrains could eventually support powershell and popular terminals like windows-subsystem-for-linux, cygwin and git-bash. The only shell that currently works out of the box for me is cmd.
I set up some aliases in my .bash_profile on my Max OS X.
It works but when I'm opening a new tab I always have to load my .bash_profile file with this command:
source ~/.bash_profile
How can I make it work for every terminal I'm opening, even if I'm restarting my Mac or Linux computer?
If you use zsh , you can add source ~/.bash_profile
at the end of .zshrc file at the following path: /Users/YOUR USER NAME/.zshrc , then restart your Terminal/iTerm2 app.
Note that this file is hidden. You can press CMD + SHIFT + . in Finder to
see it, Or just open it in default text editor with the following command from terminal:
open ~/.zshrc
Update
You don't need to do this by hand, run the following command:
echo "source ~/.bash_profile" >> ~/.zshrc
* Dont forget to restart your terminal.
The files executed at the start may be several, usually ~/.bashrc for interactive, non-login shells. The kind I assume you are using.
If so, create an ~/.bashrc file and source ~/.bash_profile in it:
if [ -f ~/.bash_profile ]; then
. ~/.bash_profile
fi
This web site has a lot of information about this.
Study this image, as it is a condensed guide
If you do need to find out exactly which file is being executed, take a look at this web page. It has a lot of specific tests to find out what file is setting what.
Specific for Mac-OS (which is an exception and loads ~/.bash_profile) do as is recomended in the site linked in this answer AFTER you confirm that your bash is doing as explained there.
I know this is a pretty old post, but this problem comes and goes quite oftenly and a lot of laborous solutions are offered. The fact is: being aware of a simple info would solve this pretty fast and easy:
LINUX/Unix OS will load the profile files on startup following the rules below (some distros may have other files names, mainly for user local profiles, but the main rule follows this):
Login Shell
First and foremost: /etc/profile is loaded (global settings);
Next: ˜/.bash_profile (local user settings- other files may be found, like ˜/.profile, depending on the distro. Check documentation).
So, if you are in a Login Shell environment, put all your crazy stuff inside ˜/.bash_profile (or the file provided by your distro) and everything will be fine.
Non-login Shell
First and foremost: /etc/bashrc (some distros will load bash.bashrc);
The next file to be seeked and loaded is ˜/.bashrc
And that's why so many people (just like me) got frustrated having to source their ˜/.bash_profile every single time a Terminal was loaded. We were simply inserting info in the "wrong" file- regarding the kind of shell loaded (see above: login, non-login).
More details on variants of the files mentioned above and some info on login vs non-login shell can be found here.
Hope it helps \o/
I'm using a Mac with OS X Yosemite and Zsh.
By accident,I delete the content of three files below:
.bashrc
.bash_profile
.profile
After that ,when I open my terminal.
The Zsh will show fail under the last login information,it confused me ,and I want to know why.
You might want to look at a duplicate question: Zshell starts up with exit status of 1 after uninstalling RVM
It has an answer that solved the issue for me:
I found a .zlogin file on my system that contained some rvm-related code. I've deleted the code, and the problem is solved!
Zsh (by default) doesn't read from .bashrc, .bash_profile, or .profile, so the contents of these files shouldn't matter. You also didn't mention which .bashrc, .bash_profile, and .profile were erased… These files exist in both your /Users/username directory and /etc. The files sourced by zsh at startup are listed in the OS X zsh man page (man zsh in a terminal) under "STARTUP/SHUTDOWN FILES". The only reason it would call one of the previously mentioned files is if they were explicitly sourced in one of the default files.
My suggestions:
Check the contents of /etc/zshenv (this is the only zsh-specific file in my etc directory). Mine has only the following:
# system-wide environment settings for zsh(1)
if [ -x /usr/libexec/path_helper ]; then
eval `/usr/libexec/path_helper -s`
fi
Can you log in at all using zsh? If not, can you log in using another shell? You can do this in the OS X Terminal.app by going to Preferences -> General and changing the option for "Shells open with:" from "Default login shell" to Command (fill in another shell, i.e., /bin/bash or /bin/sh). If you can log in with any shell, try the following solution from this question:
Looking for the error
All shell output goes to the terminal, so you could just redirect it
when starting it. As you are looking for error messages during
initialisation, I'd suggest the following procedure:
Disable the problematic configurations
Open a terminal
Check the value of SHLVL: echo $SHLVL
Re-enable the configurations
Start a new z-shell from within the running shell with zsh 2> zsh-error.log, this redirects stderr to the file 'zsh-error.log'.
Check the value of SHLVL again. If it is bigger then previous value then exit the current shell (exit). (Explanation below)
Have a look at 'zsh-error.log' in the current directory.
If 'zsh-error.log' does not show anything, you may want to run zsh -x
2> zsh-error.log in step 5 instead. This provides a complete debug
output of anything zsh does. This can get quite huge.
As the answer suggests, those logs can get enormous if you are sourcing man files at startup. Just a bare shell should result in a reasonably small log file.
Finally, you can retrieve a list of all the files sourced by zsh on startup by running zsh -o sourcetrace.
Hope this helps.
So I'm installing some things for coding and personal usage, and I need to run this in the terminal (I'm on Mac if you didn't read the title).
~/.bash_profile
It just says permission denied, Im running OSX 10.8.4 Mountain Lion. How do I bypass this?
On MacOS: add source ~/.bash_profile to the end of ~/.zshrc.
Then this profile will be in effect when you open zsh.
You would never want to run that, but you may want to source it.
. ~/.bash_profile
source ~/.bash_profile
both should work. But this is an odd request, because that file should be sourced automatically when you start bash, unless you're explicitly starting it non-interactively. From the man page:
When bash is invoked as an interactive login shell, or as a non-interactive shell with the --login option, it first reads and executes commands from the file /etc/profile, if that file exists. After reading that file, it looks for ~/.bash_profile, ~/.bash_login, and ~/.profile, in that order, and reads and executes commands from the first one that exists and is readable. The --noprofile option may be used when the shell is started to inhibit this behavior.
If you change .bash_profile, it only applies to new Terminal sessions.
To apply it to an existing session, run source ~/.bash_profile. You can run any Bash script this way - think of executing source as the same as typing commands in the Terminal window (from the specified script).
More info: How to reload .bash_profile from the command line?
Bonus: You can make environment variables available to OSX applications - not just the current Bash session but apps like Visual Studio Code or IntelliJ - using launchctl setenv GOPATH "${GOPATH:-}"
As #kojiro said, you don't want to "run" this file. Source it as he says. It should get "sourced" at startup. Sourcing just means running every line in the file, including the one you want to get run. If you want to make sure a folder is in a certain path environment variable (as it seems you want from one of your comments on another solution), execute
$ echo $PATH
At the command line. If you want to check that your ~/.bash_profile is being sourced, either at startup as it should be, or when you source it manually, enter the following line into your ~/.bash_profile file:
$ echo "Hello I'm running stuff in the ~/.bash_profile!"
No need to start, it would automatically executed while you startup your mac terminal / bash. Whenever you do a change, you may need to restart the terminal.
~ is the default path for .bash_profile
I was getting this error on zsh(mac os Big Sur 11.3), This is how i solved this :-
Go to Terminal.
cd /users/<yourusername>
Once you reach here issue a command :
ls -al
You will see a lot of files and one specific file .zprofile. This is your user profile. We need to edit this.
After this we need to edit the file. Issue the below command :
nano .zprofile
Once you issue this command file will be opened for edit. Add the path details for maven.
M2_PATH="/Users//code/apache-maven-3.8.1/bin" //add your path of maven diretory
PATH="${PATH}:${M2_PATH}"
export PATH
press ctrl + X and save the file.
Issue command after saving the file :
source .zprofile
Once done, you will be able to run the mvn command.
If the problem is that you are not seeing your changes to the file take effect, just open a new terminal window, and it will be "sourced". You will be able to use the proper PATH etc with each subsequent terminal window.
I have installed Hadoop and every time I want to run it, first I have to do this:
source ~/.bash_profile
or it won't recognize the command hadoop
Why is that?
I am on OSX 10.8
Now that we've narrowed down the problem:
Run ps -p $$ at the command line to check if you are, in fact, using a bash shell.
Realize that you are in zsh, which means you should be editing your profile in .zshrc.
Copy the offending lines from .bash_profile to .zshrc, OR
Modify your .zshrc to directly source your .bash_profile.
UPDATE: Do what #TC1 mentions in the comments and keep the shell-specific code in each shell's own profile, and from those profiles, only source shell-agnostic code.
On Mac Catalina, I just had to open "preferences" on terminal and change the "shells open with" from "default" to "Command(complete path)", which the default path was "/bin/zsh". touch ~/.zshrc, if that file doesn't exist already, and copy/paste your stuff from ".bash_profile" into the ".zshrc" file.
To elaborate, with terminal running, I opened "settings" from the Terminal menu on the Mac navbar. On the "General" tab, look for "Shells open with" select "Command (complete path)", and type in /bin/zsh.
bash_profile.sh is applicable for bash shell.
if your default shell is not bash and if your default shell is someother shell for example zsh then you have to manually load the .bash_profile using source ~/.bash_profile.
You can always change the default shell to bash shell so that the .bash_profile file will be automatically loaded.
Inorder to automatically load .bash_profile, you can update your default shell to bash using the command chsh -s /bin/bash
cat /etc/shells will list the default shells available in the
machine
echo $SHELL will display the currently active shell in your machine
To change active shell to a different shell, use chsh -s /bin/bash.
Then echo $SHELL to verify if the shell has changed.
Terminal -> Preference -> profile -> Shell -> Run command : source ~/.bash_profile
Tick on run inside shell.
After doing all those , just logout and check weather everything works fine or not
I tried the approved answer. Changing the .zshrc file works for one of my machines. But for the other one, when I run ps -p $$, it is -sh under the command. And I changed both bash and zsh files, neither of them works for me this time.
So I found this
https://www.gnu.org/software/bash/manual/html_node/Bash-Startup-Files.html
it mentioned
"When Bash is invoked as an interactive login shell, or as a non-interactive shell with the --login option, it first reads and executes commands from the file /etc/profile, if that file exists. "
so I went to that file /etc/profile and add "source ~/.bashrc" in that file. Then it works since every time a terminal is opened, it runs the command in that /etc/profile file.
Not sure if this is the best solution but it works.
sudo nano /etc/bashrc and change that, restarted the terminal and it finally remembered with command. Tried ~/.bash_profile and ~/.bashrc without success, just wasn't sourcing it.
Go to “Preferences/Profiles then look in the right window and find “shell”.
Once in that if your “Startup Run Command” hasn’t been turned on. Click the box to turn it on and in the command section type:
(If you made a .zsh file)
source .zsh ; clear
(If you made a .bash_profile)
source .bash_profile ; clear
Doing this ; clear
Will clear your terminal to a new page so that you don’t see your terminal display:
“Last login: etc
User#user-Mac ~ % source .zsh
If you typed the commands as I said you should just get this:
User#user-Mac ~ %
That way you will be greeted with a clear page with no extra jumbo. Also to make sure that your .zsh or .bash_profile aliases work type the following command to see a list of your custom aliases:
Alias
One alias I like to do is
alias LL=“ls -la”
This will display a tree or the directory you are in as well as hidden files.