I hope this is the right place to ask. I was thinking serverfault might not be correct, since the computer in question is not a server. Feel free to migrate if StackOverflow is not right.
I usually install IIS on servers but have installed it on Workstations before. I actually had the same problem with another machine of the same model a few weeks ago but can't remember how I resolved it. I must have installed additional features or run some powershell-command that did not resolve the issue on this machine.
I installed IIS the correct way using the Windows Features, as described in the answers to this question. I've actually removed and reinstalled it since then, but it hasn't resolved my problem.
The WWW publishing service is running and I can open the IIS Manager, but it's completely empty, unlike here where the IIS Manager at least shows the local computer
When I type localhost into a browser I don't see the IIS Startpage, I get the error ERR_CONNECTION_REFUSED
You can see that all the required checkboxes are checked:
And the service seems to be running.
I've since tried installing IIS using
DISM:
Powershell:
And I checked the status using the iisreset command which was mentioned in the comments here (second linked question upstairs):
It restarts without any error and says everything is working fine.
Has anyone ever encountered this before or might know what I could try to get IIS actually working?
Edit:
I just noticed, while trying to uninstall IIS, that I can not uninstall it. I used Windows-Features and confirmed to reboot when prompted, but while rebooting Windows does a rollback and IIS is still available. So I can't even uninstall it.
Also just found this similar quesion on SuperUser. I'm still trying some suggestions there. So far to no avail.
Thanks for the comments.
I was on vacation, but a colleague was able to fix the problem.
Unfortunately, the solution was to reset Windows 11. He was then able to install IIS through Windows Features and it worked.
No idea why it didn't work in the first place, or why it got to this unrecoverable state. But now everything is fine.
Related
We've successfully set-up WDS (Windows Deployment Services) and had it all working (it's serving an unattended Windows 7 x64 installation, the user only has to F12 then wait for the install to finish) but it no longer works the way it did before.
We're trying to F12 the exact same machine where it used to work. The WDS part of the installation is still automatic (unattended) but ImageUnattend.xml does not seem to run on the client at all now, it gets stuck at the language selection (everything after that is manual as well which is supposed to be automatic).
Inspecting C:\windows\panther on the client machine shows that WDS pops up with an error: WDS CallBack_WdsClient_CopyPrivatesDone: Failed to process client unattend variables.
Changing "%MACHINENAME%" to "*" in the ImageUnattend.xml file makes it all automatic again, however it then renames the computer incorrectly.
The variable %MACHINENAME% worked before, so why does it not work now? Has anyone else met this issue before?
Using a different user (domain administrator) in the ImageUnattend.xml file does not seem to change anything.
After countless of attempts with at least 15 new ImageUnattend.xml files, I decided to restart the server and use the original files I knew worked before.
This fixed it.
Recently i installed Microsoft Visual Studio 2013 Preview Ultimate on Windows 7. Everything went smoothly except now i can't access www.microsoft.com and www.skype.com anymore. Tried latest IE10 and FireFox, both show blank page when accessing the above mentioned web sites. Firefox in its left bottom corner shows that it is waiting for ajax.aspnetcdn.com.
I'd really like not to reinstall OS on my machine, so i'd appreciate any idea how to fix this. For myself i tried to stop Firewall service and disable MS Security Essentials runtime protection, neither helped.
PS: I can access www.microsoft.com and www.skype.com from another machine in the same local network
UPDATE: i am using tfs.visulstudio.com as my TFS server and it opens fine if i am not signed in. But once i am trying to log in it opens blank, like browser is waiting for something (the same as for microsoft.com and skype.com). Something related to live ID?
Don't think this is the website to post this kind of question but try uninstalling VS2013 preview because you think that's causing the problem. Search in Google for people getting similar problem. I also don't think it is VS2013 because I can't think of anyway of how VS2013 would somehow disable you from going to a certain website. Make sure the sites weren't down at the time or if you're having something kind of Internet server issues.
skype is owned by microsoft, so you can't enter both microsoft pages. This could be related with some kind of ISP (Internet Service Provider) and not with VS2013, or you can try rebooting your router. Last thing i would do is traceroute both address and see where they fall.
I wanted to write this as a comment but I don't have enough reputation yet. Anyway, obviously trying to uninstall the program and trying again would be a good start as already mentioned, but you should also look inside your hosts file for any weird redirections some virus of malware might have set up. It's located at "C:\Windows\System32\drivers\etc" and you can open this inside notepad (might require notepad to be run as an administrator). Check to see if skype.com or microsoft.com are in there and are pointing to a different IP address. If they are you can just remove them and save the file (might require a restart to take effect). If still no luck you should try a livecd of a linux distro to make sure the problem is definitely inside your windows somewhere.
Let us know how it goes.
I have freshly installed VS2010 with SP1, and when I try to connect to a project on tfspreview.com, I get TFS31002 error:
Google did not help very much. Anyone solved this?
Ok, I managed to find this blog post which has solution: install KB2581206 which enables VS2010 to connect to tfs-azure and use Microsoft account to authenticate.
It works :)
Credits to Tarun Aurora
It may seem unrelated on quick glance but I had the same problem. My machine had a preloaded McAfee. Even I hadn't activated it.
It was popping up asking me to register all the time. And I had always told it to ask me later and had in fact turned it off, but it was still blocking me from getting onto the Team Foundation Server anyway.
Whenever I uninstall the McAfee that was preloaded on the my new machine, it has started working perfectly fine. Anyone else who can't solve this problem with the mentioned answers above, and has McAfee on the machine, just give this a shot.
Hope it helps
We are working with Visual Studio 2010 and Team Foundation Server 2010. We did not have any problems for about half a year, but:
Since a couple of days we get the following error: Team Foundation services are not available from server (...) The remote name could not be resolved; (...)
The problem occurs randomly (we are unable - yet - to pinpoint the conditions on which it occurs) and persists until we restart Visual Studio. The problem occurs about 8 times per day per developer.
Because we seem not to get past this problem and we cannot find anybody writing about this specific combination (the error and the 'remote name' part), I thought it wise to ask you guys about it ;) . Could anyone please help?
This is a client, server or infrastructure related problem on network level. The DNS entry for your TFS server cannot be resolved correctly at times for host dfz-vm223.
Suggestions for troubleshooting:
On some developer systems, replace the hostname dfz-vm223 by the ip-address of the TFS server. If the problem stop occuring there the DNS system is instable.
Setup a continuous ping stream (ping -t dfz-vmm223 from command window) and see if the host system is pingable in case you have TFS server problems.
Just found out what the problem was: the problem is proxy related. When we disable our proxy, the problem is gone. It appears our proxy and TFS are troublesome together. If anyone experiences the same problem and you are working with a proxy server, I would suggest you try disabling the proxy too.
I had the same problem, although I'm using VS2012 and a WAN connection to TFS.
I solved the problem by flushing the DNS cache.
To flush the DNS cache, start a command prompt with admin rights: ipconfig /flushdns
You need to do this in all the computers where the problem occurs.
I know this is old, but I had this problem sometimes when I ran Fiddler.
Sometimes Fiddler would crash or not clean up properly and the whole machine would get into some weird state where not even reboots were helping. The solution to it usually is to start Fiddler again, turn off any interceptors/collecting traffic and shut it down again.
Some of my co-workers and I had this problem as well. Out of about 25 developers, most never got this error. But three of us got it pretty consistently. The symptoms are identical, but we are using Visual Studio 2013 almost exclusively. In this version of Visual Studio, the error is preceded by the code: TF400324.
We found eventually that the three of us had all installed Productivity Power Tools 2013. And the developers that were not affected by this error had not installed it. Most had not heard of it. This used to be a very popular extension, so I have always installed it as I set up my system since about 2007. But apparently, in its modern incarnation in Visual Studio 2013, perhaps in combination with some quirk in our network or something, it can cause this problem. We have each uninstalled it, and have not gotten this error since. (It's been several months now.)
If you have this extension installed, you probably already know about it, because you probably installed it yourself. You probably started using it years ago, and it became a habit to add to each new installation. You will find that today, the default installation of Visual Studio actually includes most of its features already. To uninstall, go to Tools --> Extensions and Updates... Then click on Productivity Power Tools 2013, and click Uninstall.
Hade the same issue. For whatever reason the windows DNS Client service on my PC wasn't running. Changing it from Disabled to Automatic solved this problem for me.
Too long for comments:
First off, as #kroonwijk stated, this is an infrastructure issue. Your DNS queries are either timing out or the DNS server is not responding at certain times.
In a comment you mentioned a change over from regular machines to laptops for your entire dev team. If I had to make a bet I'd say that the DNS configuration on the laptops is not the same as what you had on the other machines.
You need to take this up with your infrastructure people. If you still have access to the older machines boot one of them up and compare the IP configuration. If not, get them to fix the problem. The DNS resolution problem could be any one of a number of factors. For example, the new machines could be pointing to an incorrect DNS server that has network issues or their might be some incompatibility between how Win7 makes DNS requests and your DNS server.
I have also experienced this problem and it doesn't always have to do with name resolution.
If you add an entry to your %systemroot%/system32/drivers/etc/hosts file for your TFS server, it removes any dependance on your name resolution servers.
If you are still experiencing the problem, then it has to do with either visual studio or one of the VS Extensions that you are running. There may be a memory leak somewhere. Disable all your Extensions using the extension manager, restart VS, and see if you still experience the problem.
I'm trying to get Redmine working on Windows/IIS 7. I've found several walkthroughs online, but none of them work on my Windows Server 2008 R2 box. I got a simple app (create app, no customization) to get as far as RoR error, but Redmine itself shows a 500 error (ruby.exe exited unexpectedly). I installed sqlite since some guides mention that, though Redmine uses MySQL by default. I started with the Bitnami installer and tried to customize for IIS, RorIIS, FastCGI, lots of things that look like they should work, but this problem is killing me.
If I run ruby.exe from the command line, passing it the path to the dispath.fcgi file I get an error: "The procedure entry point SetMagickMemoryMethods could not be located in the dynamic link library CORE_RL_magick_.dll". I had to install the rmagick gem myself which seemed strange since everything worked perfectly under Apache. I really thought it would be a smooth cut-over since it's up and running already and just changing web server.
Any help is much appreciated.
I've tried a lot to install Redmine on Windows environment under IIS. There's very little (or none) documentation about it. Lost many days on this. In the end, I decided to stick to the Bitnami stack of Redmine. The only caveat is that we had to use another port (8080, in our case), that's it. I gave up the idea of integrating Redmine/RoR with IIS and never looked back. Everything is working great in production now and everyone is happy about it around here.
Sorry I can't give a better answer than that, I'm just sharing some recent experience. I was obsessed about integrating RoR/ISS until I realized it was not a real requirement, it was just something I stuck into my mind. Think about it.