I am building a forestplot with the forestplot package (https://cran.r-project.org/web/packages/forestplot/forestplot.pdf) and have come a long way but I am now stuck on 2 final issues. I am hoping someone here might have helpful advice.
I am presenting the results for my meta-analysis in a forestplot that looks a lot like this example and is based on the script provided here;
example fp
https://cran.r-project.org/web/packages/forestplot/vignettes/forestplot.html
There's 2 things that I cannot seem to figure out
I want a vertical line in the graph for the mean OR
(fp_add_lines is adding a line to the total figure not just the graph part of the figure)
I want to add a second summary to the plot/graph
(fp_append_row works perfect for the first summary, but not for a second)
Anyone here who has experience with this package and knows how to tackle these issues?
I naturally prefer a clean script and not a work-around (overlaying 2 plots to get the vertical line, or manually adding a symbol for the second summary).
Many thanks in advance!
Related
I'm an ABAP programmer and I was asked to make a minor modification to an IPL label.
Easily done, but now I was tasked to fix a long running error within said label.
I know nothing about IPL and the lack of a online viewer makes everything worse...
The problem is that "tabulation" right in the middle of a text (I underlined it in blue on the Label's pic).
I checked the code and there's nothing there that should make that tabulation appear.
I spent a whole month reading manuals and trying to fix it, but nothing changes...
Here's the code and the resulting label:
<STX>R<ETX>
<STX><ESC>C<SI>W791<SI>h<ETX>
<STX><ESC>P<ETX>
<STX>F*<ETX>
<STX>H1;f3;o220,52;c34;b0;h2;w1;d3,300052947-FANDANGOS PRESUNTO 140GX14 LD<ETX>
<STX>H2;f3;o130,52;c33;b0;h1;w1;d3,Val:<ETX>
<STX>H3;f3;o130,204;c34;b0;h1;w1;d3,QTD.Unidade:<ETX>
<STX>H4;f3;o90,33;c34;b0;h0;w1;d3,16/08/21<ETX>
<STX>H5;f3;o90,302;c34;b0;h1;w1;d3,14<ETX>
<STX>B6;f3;o375,44;c2,0;w6;h102;r0;d3,17892840816329<ETX>
<STX>H7;f3;o275,44;c26;b0;h17;w17;d3,17892840816329<ETX>
<STX>H8;f3;o130,490;c34;b0;h0;w1;d3,Lote:<ETX>
<STX>B9;f3;o090,600;c2,0;w2;h45;r0;d3,0005218177<ETX>
<STX>H10;f3;o130,600;c34;b0;h0;w1;d3,0005218177<ETX>
<STX>D0<ETX>
<STX>R<ETX>
<STX><SI>l13<ETX>
<STX><ESC>E*,1<CAN><ETX>
<STX><RS>1000<US>1<ETB><ETX>
Label
Can you guys help me, please??
Edit: Just to make it clear, I did that blue line on that image to show what's the problem.
Here are some tests I did by changing the data:
Test1
Test2
The error always appear at the same point in the label, as long as there's a space in that text.
Have you looked at the raw data of the output? Is it POSSIBLE that what looks like a space is actually some special character that is making IPL choke blue? Because it is literally the 1 character between the "O" and "1". For grins, you might also try to change the character in the data to a "-" just for purposes of confirming data context. It might even just be a TAB character.
I have done IPL years ago and have actually gone to the point of defining a pre-defined label template and generating output that says to use template X (whatever # I created as),and pass the data along that fills into the respective fields.
A final option I would throw in is this. Take the sample output you have and just force sample data into each of the output areas. So, instead of your literal data, put fake data in similar context just to see if it is data specific or other. Such as
<STX>H1;f3;o220,52;c34;b0;h2;w1;d3,300052947-FANDANGOS PRESUNTO 140GX14 LD<ETX>
becomes
<STX>H1;f3;o220,52;c34;b0;h2;w1;d3,123456789-TESTING-SAMPLEDATA-123XY12-AB<ETX>
Notice same context of data, but no spaces and using dash "-" just for testing. Is there something special about the actual data. This is a good way I have done historically for similar strangeness early on doing IPL labels.
User decided to not spend anymore time on this issue, so now I'm unable to further test the label.
Unfortunately this problem will go unsolved for now. Hope I get another chance to fix this and learn more about IPL.
Thanks you so much for your answers!
Struggling to find rank values from highest to lowest, please see attached example of what I'm trying to achieve.
My current custom expression is:
Sum([ViolationAmt])
I have tried this:
Sum([ViolationAmt]) over Rank([ViolationAmt])
I've played around with the rank expressions however unable to implement...would be very grateful for some help.
Spotfire Rank Example
I need to make a lot of assumptions here because I don't know anything about your data set or really what your end goal is, so please comment back and/or provide more info in your question if I am off base.
the first assumption is that each row in your dataset represents one, for simplicity, [AccountID] with a [ViolationAmt]. I'm also guessing you want to show the top N accounts with the highest violations in a table, since that's what you've shown here.
so it sounds like you are going to need two calculated columns: one for getting the total [ViolationAmt] per account, and then another to rank them.
for the first, create a column called [TotalViolationAmt] or somesuch and use:
Sum([ViolationAmt]) OVER ([AccountID])
for the second:
Rank([TotalViolationAmt])
it will be useful to read the documentation on ranking functions if you haven't already.
you could probably combine these two into a single column with something like:
Rank(Sum([ViolationAmt]) OVER ([AccountID]))
but I haven't tested this at all. again, if you put in a bit more detail about what you're trying to accomplish it will help you get a better, more detailed answer :)
Couldn't come up with a good way of googling this..
I'm working on a 3d model in Maya and it's getting slow. At first I couldn't find what it was, but I'm suspecting it's all of the polyBrideEdge, pCubeShape and whatnot. Since I was duplicating one part and repeated that a couple times; there's quite a lot of them.
Here's a screenshot of what I mean: http://imgur.com/a/TQr0e
Nevermind, I found it! For anyone wondering: you select one of the nodes with the same type in your attribute editor and click 'hide'. This will group them together I suppose and name it 'polyUniteX'. It might not be the best way or the right way, but this has fixed any performance issues I had prior to doing this.
So I am not very good with computers and have to create my first app for a project. It's going fine so far - essentially I am trying to create an app that records and saves data. Right now I'm still getting the record part down, since Xcode is having periodic issues. I am using this link for setting up the code:
http://www.techotopia.com/index.php/Recording_Audio_on_iOS_7_with_AVAudioRecorder
Unfortunately, I am running into 2 types of semantic errors, two red, two yellow. They are all in RecordModelController.m - the first is like this:
return [self.pageData indexOfObject:viewController.dataObject];
Xcode claims that Property 'dataObject' isn't found in any object or forward class in 'RecordDataViewController'. That's actually my two red errors, they just sound very similar so I paraphrased them into one. The yellow error, however, repeats itself twice on the same line of code, which is:
return [self viewControllerAtIndex:index storyboard:viewController. storyboard];
The yellow issues on these lines of code (again, repeated twice) is "Incompatible pointer types returning 'RecordDataViewController *' from a function with result type 'UIViewController *'" - I genuinely tried to look in RecordDataViewController.h and couldn't make sense of this. Like I said, bad with computers, not sure why I'm having this issue, and I know that it's probably something basic.
If anyone would be willing to help me out with how to deal with issues like this, that would be great. Thanks, and sorry for my incompetence.
The red are called errors. The yellow are called warnings. I'm going to suggest you look at a few beginning Xcode/iOS programming tutorials so you understand the basic concepts of how view controllers, arrays, etc. work in objective-c. The best place to start for someone completely new as yourself is here: http://www.raywenderlich.com/tutorials
Hope this helps!
this is the first time I have posted here.
I am trying to make a stacked column in BASH but I cannot seem to get anywhere. I just have three different columns of data I would like to stack over time. I was able to do it in excel, but not sure how to get it to work in BASH.
I did find a similar question in this site but for a different program.
plot stacked bar plot in R
But I would only need one of the charts and not two. So if anyone knows how to do a similar graph in BASH, please let me know. I'm new to programming, so sorry if it is a dumb question.
Thanks...
There is a very simple to use java package called livegraph (http://www.live-graph.org/). You feed to it an input file, with a few metadata lines on top of the input file, and it graphs it for you, in real time too. I used it in Ubuntu and it worked like a charm.