As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance.
Closed 9 years ago.
Does anyone have any recommendations of tools that can be of assistance with moving literal values into resource files for localization?
I've used a resharper plugin called RGreatX but was wondering if there is anything else out there.
It's one heck of a long manual process for moving the strings across and think there must be a better way! RGreatX is OK but could be a bit slicker I feel.
Here's one:
http://www.codeplex.com/ResourceRefactoring
It'a actually a Microsoft "open source" Visual Studio(2005 and up) tool that integrates with the IDE. You can easily replace every occurence of a string with a ressource reference with a few clicks.
You may find Zeta Resource Editor useful too.
ReSharper itself (5.0+) now has support for localization which includes moving strings to resource files and highlighting localizabile strings.
Try Visual Localizer - you can batch-process whole code, select which strings may be localized and the tool will add them to a resource file and create a reference instead. Many other features easing localization are included.
Related
As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance.
Closed 9 years ago.
I developing a small project with F# on Visual Studio 2012. I'm used to C# development, and it seems to me that C# has a far far (far) better support in the environment than F#, and even better support when adding resharper.
Are there any plugins that can improve that?
I would love snippets, better templates, code folding, refactoring, etc...
Is there is an open source project trying to achieve this?
As mentioned in the comments, there are fewer advanced code editing tools for F# than for C#. This is one thing where the F# community is quite active, so it is good idea to follow the mailing list and fsharp.org web site.
One less widely known thing is that the standard tooling includes (not very tested) support for collapsing of code blocks and navigation bar that can be turned on.
As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance.
Closed 11 years ago.
Diving into vs2010 Extensibility and I gotta say the subject seems to be as wide as it is deep. Anyone have tips, tricks or hacks to leverage jumping into this somewhat intimidatingly huge niche of visual studio?
I wrote 9 hours of Visual Studio Extensibility material for Pluralsight (part 1, part 2). If you're an MSDN subscriber you can get a one-month free subscription which should give you more than enough time to get through both courses. I also put together some 2008 and 2010 talks on VSX topics and both the slides and demos (along with videos) are on Code Project.
I'll be first then....
Saving the following text as a registry and appending it(open it with regedit) allows for easier identifying of a particular menu item or command and allows you to build on existing but hard to find UI elements...
Windows Registry Editor Version 5.00[HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\8.0\General]
"EnableVSIPLogging"=dword:00000001
I found this useful tidbit here
With this you can add Context Menus into you vs2010 IDE (New version is using MEF to some extent but there are older versions just using MAF). So much easier then MAF!!!
VSPackage Builder: Yet another awesome way to design Visual Studio Packages without having to rummage through the innards of a vs extension to design one.
As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance.
Closed 11 years ago.
As a learning exercise I'm building a basic scientific computation environment based on .NET. I'd like the GUI of the app to be much like matlab, in that I have an interactive window, an objects window and the facility to spawn visualisation windows. Intellisense in my command window would be very nice. It seems visual studio itself could almost be used in this manner, is this a viable option? Creating the visualisations within the VS environment seems like the only hurdle. What could I do here?
Eclipse is also an option I suppose but I'd prefer to stay totally with .NET if possible.
Any other suggestions?
You could take a look at MonoDevelop here to provide some help. It is open-source and one of the nicer IDEs.
You could also build something based on GEdit, as it is very pluggable.
Those are the two tools, plus the CLI that I use for .NET development, but I am entirely on Linux/Unix using the Mono tools.
Hope that helps!
I've just discovered VSlab. Its specific to F#, however its a good demonstration of what I would like to be able to do with my own DSL in terms of visualisation and an interactive editor.
As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance.
Closed 11 years ago.
Has anyone got any recommendations for tools/utilities to use in creating/debugging XPath queries for Windows ?
SketchPath looks like it might help (and is free)
If you have Notepad++, there's an XML tools plugin. Among the tools in that plugin is a simple XPath expression evaluator. Sketchpatch is much more complete (I've tried it and it's nice) but if you use Notepad++ all the time it's worth knowing about this plugin.
There is a new plugin for Notepad++: XPatherizerNPP. The biggest advantage it has over XML Tools is the reverse lookup feature.
There are a couple of good options on Codeplex ..
XPathVisualiser at http://xpathvisualizer.codeplex.com/
XMLExplorer at http://xmlexplorer.codeplex.com/
Liquid XML Studio comes with an XPath visualizer. The stand alone version is free in the community edition. If you want to integrate it into visual studio then you have to buy it though.
It highlights the results as you type, and has auto complete on the XPath expression.
I've been using XmlSpy.
As it currently stands, this question is not a good fit for our Q&A format. We expect answers to be supported by facts, references, or expertise, but this question will likely solicit debate, arguments, polling, or extended discussion. If you feel that this question can be improved and possibly reopened, visit the help center for guidance.
Closed 10 years ago.
How do you create a .cur (for a mouse cursor), from a GIF image file?
What tool or process can I use?
You need to use a cursor creator, which is pretty much just a bitmap with some header data. I'd use Irfanview if you do not use Visual Studio or what not. If you use Visual Studio, just create a new cursor, and copy and paste the image data right into the editor... I'm sure I could whip up a tool that does this for you on a file basis, but I'm sure they are many tools out there already.
IconStudio is able to aquire from other images.
I just found a reference to a new tool called IconWorkshop lite which is a plugin for Visual Studio. I thought of this question and figured I'd leave the link here for posterity. I don't know for sure if it will do the job asked in the question...
http://sharptoolbox.com/tools/iconworkshop-lite
You could also convert it into a .ico which is more common and rename it with the .cur extension.