How to deploy my ASP.NET website to IIS7? I'm using Visual Studio 2005. And I don't know where to start.
I tend to take more of a manual approach, but there is a web publish feature built into Visual Studio that should get you going.
Here is some reading you can do on it:
http://www.codeproject.com/KB/aspnet/VSDeploy.aspx
Here's some preliminary steps, a little more manual than some other options, but they are the ones I'm comfortable with:
Obtain access to the server where IIS7 is installed. If you don't have IIS7 installed on a server, install it. If you are not able to get access to this server, you will need to have the administrator of that server set up IIS7.
Create the website in IIS that you want to deploy to, or have the server administrator create an empty website for you to run your website on.
Use the 'publish' feature in Visual Studio to build a deployable version of your site. This is what you will install on IIS7.
Copy paste the website over to the server where IIS7 is installed. You will need to place it in a directory which you can set as the Home Directory for the site.
If you have access to the server, and rights to administer IIS7, set the Home Directory of the site to point at the directory where you copied over your files.
Enable the website, and you should be good to go!
NOTES:
These instructions assume the following:
a) You have some basic knowledge of how to configure IIS7 (or at least access to somebody who does)
b) You have some basic knowledge of how to install IIS7 if it is not installed (or access to somebody who does)
c) You have some basic knowledge on web site publishing from Visual Studio
If you need more instructions on these 3 notes, you may wish to consult the references for IIS7 and Visual Studio.
Related
If you see below image, there are two applications deployed to IIS.
QManualDeployment - This is deployed using Visual studio Publish feature.
InstallShieldPOCWebApplication - This is deployed using InstallShield installation tool.
Option 1 is working without any issues, but as you see InstallShieldPOCWebApplication it looks like foder rather than web site. Also it does not work.
How can I deploy application as website using INSTALLSHIELD
Here is my IIS Settings from InstallShield Tool
Default Web Site is a website. QManualDeployment is a virtual directory / application off of Default Web Site.
In InstallShield, it isn't enough to just author all of your directories/files into components. You also have to define the IIS configuration.
I'm not sure if you are using InstallShield Express, Professional/Premier of Limited Edition so I can't give you more direction then that.
I faced same issue with Post owner, after run Install Shield setup file, it show a folder in IIS and I resolved by right click to folder name and convert to Application.
I share for whom concerned.
After that we can select suitable application pool as
I have just completed an Umbraco intranet using WebMatrix. Now I want to publish it to our server so that everybody can see and use it. WebMatrix can only do Web Deploy or FTP, so I opened the project in Visual Studio 2013 to publish it there. I was able to publish it to my desktop, where I have attempted to get it running here before uploading to the server. So in IIS I 'Add a Website' and set up the project, using port 101. I tried it both on my desktop and then moved it to wwwroot and in both cases IE says 'This page can't be displayed'. I am using the CE database with Umbraco 7.2.4.
Help please. I've been at this for days now.... I've tried the umbraco forum and google and got nowhere. :(
Tony
If you have remote desktop access to your web server, you don't actually need to rely on web publishing. You can just build the website in release mode, and then copy all the folders from the web project onto the webserver.
On the web server you can manually set up an IIS website and set up host names etc. You shouldn't need to deploy it using visual studio, this way is much safer
In IIS, you should set up a new website, using port 80 on your HTTP binding.
From the sounds of the error, IIS is not looking at the right physical path.
You should use the Microsoft guide on How to set up your first IIS Web Site as a starting point.
I am new to Orchard 1.8 and have developed a website using Visual Studio Premium 2013 Version 12.0.21005.1 (with the .NET 4.5.51641 Framework) and I need to know how to Publish/Deploy an Orchard website from a local desktop development box to an in-house "production" machine that has Windows Server 21012 R2, and IIS 8.5.
The development version of the site (on my local machine) uses SQL Server 2012 SP1 as the database.
How do I Publish/Deploy to the in-house "production" machine that has: Windows Server 21012 R2, and IIS 8.5 and specify another "production" database (which will need the data from the development version transferred to it)?
I am also new to publishing/deploying using VS. I would like to use "File System" as the Publish method, if possible.
Any detailed steps/instructions on how to do this would be greatly appreciated.
Thanks in advance.
You're right about needing to change settings.txt not web.config for the database connection string.
For the remaining steps, this answer assumes that you're developing from the Orchard Source, so you can run build precompiled from a developer command prompt. Here is an overview of the steps:
Configure IIS 8.5 on the server the same way that you configured it on your local desktop. You'll need to configure the application pools, for instance, and also make sure you have ASP.NET enabled.
Backup your local database and restore it on the production SQL Server. You will also need to configure security for the application pool.
Make a precompiled build of your Orchard CMS.
Make a new website in IIS on your production server.
Copy and paste the build results from step 3 into the root directly of the website from step 4. Set all the Access Control permissions for App_Data, Media, Themes, and Modules, as needed.
Change the settings.txt file to point at the new database.
You will be good to go unless you face some gotchas. You might also need to bring access your Media folder, if it contains images or other static resources to which your site links, and maybe your Theme too.
I have a web application implemented in ASP.NET MVC3 and SQL Server 2008 Express. It's relatively small so I can deploy it in local computer of my clients (Windows 7 or higher).
Currently, I deploy it manually by create new web site in IIS, copy published files to the folder of website, install SQL Server 2008R2 and use Management Studio to restore database with some initial data.
It's OK with me but not with my clients. They can't do the same things. What I want is an automatic installer, my clients just need to click a few buttons to get all done.
Specifically, this automatic installer must do the following things:
Install SQL Server 2008R2 Express and restore the initial database.
Install IIS7 (if it's not enabled in Windows 7).
Create a new app pool (V4) and a new Web Site use this pool. Then copy published files to the folder of the Web Site.
The installler can run aspnet_regiis command and grant permission for NETWORK SERVICE account to TEMP folder. This is required for web site to run.
The installer can copy some fonts to Font folder of Windows.
I see many app can do this automatic installer, but after googling I can't find a thorough solution to try.
Please give me some advice on this. Thanks in advance!
If you want a free solution, WiX is what you need, but it will take you some time to learn using it if you never created a package with it.
A more easy to use, and also powerful, but payed tool, is Advanced Installer, you need Professional edition, but you can try it for free with the 30 days trial mode. It has predefined prerequisite for SQL Server Express, built-in support to install IIS entities, and set file/folder permissions. Bassically all the requirements you need.
To enable any IIS feature you can simply add a PowerShell script.
Is there some kind of deployment wizard I can run and have it install just the things it needs to run right onto the server end point? Do I have to build the project using VS2010 on the server? If I can't get this thing deployed today I am really going to be screwed.
IIS 6 is there and I think .NET 4 is installed (I tried installing it from Microsoft and they had me install a million things like VS2010 express and SQL Server and all this other crap, the install failed but .NET 4 does show up in IIS).
I achieved this by enabling an FTP site for the IIS server website and using this to deploy the web application within visual studio 2010 which will build and deploy just the changed files for each build. Works very well. You can even add a Publish toolbar to help deploy regularly more easily.
All you have to do is install the .NET Framework 4.0 (32 / 64 depending on build) and run aspnet_regiis.exe in the Framework folder.
For me this is located here:
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\aspnet_regiis.exe
Hope this helps!
You can also use the publish command from VS 2010 to save it to the filesystem and then copy the files into an IIS site on the target server. Just map a network drive to X: or something (for your sites root) and publish directly to the share.
You can take a look at Web Deployment projects or even the VS "Publish" feature
From the Build menu in VS2010, just click Publish [name of your web project] and enter the location on your web server where the site is going to be hosted.
VS2010 will publish the files required there.
It shouldn't be necessary to install VS2010 Express, just to deploy a site. But if .Net 4 and ASP.NET MVC 3 is installed, you should be able to deploy. Right click the web app in VS2010, and hit Publish.
Remember to set the configuration to Release!
But, with IIS 6 you could be in for a fight in regard to HTTP Modules, Handlers and other server configuration. Anything inside your Web.config's system.webServer section will always be ignored by IIS 6.