Is there a generic makefile i can use to build a simple c++ project? on windows?
i modified a working wii makefile to win32 but could not build properly (difference in make? the make app and the makefile seem to be found). I did a little hack and made a copy of mingw32-make as make.
-edit-
export PATH seem to be the reason i got my old error (make: make Command not found)
now using my new makefile (single file instead of 2) i get
"make"
make[1]: Nothing to be done for `/c/nightly/test/test.exe'.
this is my current makefile
http://pastie.org/318548
I am using mingw. I have a installation from that site along with another with codeblocks. the 'make' binary is a copied mingw32-make.exe where i chopped off the prefix. doing make -h i get "This program built for i686-pc-msys" so it looks correct
Your make file looks fine, for the most part.
Check to see that gcc and g++ are installed correctly.
Also the Clean target uses: rm -rf
rm is the unix (linux et al) command for remove. In order to get rm on windows, I recommend using Cygwin.
Which C++ compiler are you using?
As indicated in the error message, the problem does not come from your Makefile.
"make" itself couldn't be found in your path.
Related
I'm trying to compile a C program using Ncurses on Windows. I compiled it successfully using GCC and it works perfectly if I run it in Cygwin or MSYS2. However, if I try to run it in the Windows Command Prompt, I get this error:
Error opening terminal: xterm-256color.
Is it possible to compile it to run using the native Windows console? This is how I've been compiling it:
gcc -o PROGRAMNAME main.c -lncurses
I also have the Cygwin and Msys dlls for Ncurses copied into the directory of the compiled executable.
Update
So I figured out how to get the program to run. I deleted all the DLLs from the project folder and then added "C:\msys64\usr\bin" to my PATH environment variable. However, I would still like to know if there's a way to get this to work if I were to distribute it, since it's still relying on my installation of MSYS2.
Update 2
Gave up and just used pdcurses and it works fine.
Update 3
Nevermind, found a solution! See below.
I figured out a solution. I'll post it here in case anyone else has this same issue. Thanks to Thomas Dickey for your help!
Install the mingw-w64 toolchain and any other packages you need to compile your project (this is mostly where I messed up)
Make sure to include the /mingw64/include/ncurses directory when compiling, or else gcc won't be able to find curses.h
Include /mingw64/bin as a static directory or copy over the necessary dlls to the same folder as the directory
I ended up with this to compile:
gcc -I/mingw64/include/ncurses -o PROGRAMNAME main.c -lncurses -L/mingw64/bin -static
Whilst attempting to make/compile the grafic package, I'm seeing this error after calling the make command within the grafic directory:
f77 -O2 -c grafic1.f
make: f77: No such file or directory
make: *** [grafic1.o] Error 1
I have XCode and all associated command line tools installed, what could be causing this error?
This error is make telling you that you have no binary in your path called f77. There are two things you need to look at the fix this:
Do you have a Fortran compiler installed? MacOS X/Xcode does not come pre-installed with one by default. The easiest options to install one are via third-party tools like macports or homebrew where you can install gfortran which may be a standalone package or may be part of the gcc package.
Once you have a compiler installed, your makefile needs to know about it. Without seeing the makefile this is only an assumption, but if autotools are not used the fortran compiler is usually hardcoded in a variable called FC, e.g. you might see a line
FC=f77
and you would change this to
FC=gfortran
assuming gfortran is in your path.
Once you have a Fortran compiler installed and the makefile knows about it, you should be able to execute make successfully.
I am installing glfw forcodeblocks, when I try to execute the makefile through command prompt in order to compil glfw using this command:mingw32-make win32-mingw I get the following error mingw32 make: ***no rule to make target 'win32'. stop.
I am running a 64 bit version of windows 8
Edit:
For newer versions of glfw you can not use compile.bat or command mingw32-make win32-mingw
You must use CMake to create makefiles under the source folder e.g. build folder.
Then you can run mingw32-make .
For older versions :
Try it with the command described on the glfw side.
Unzip the archive anywhere you like (I will assume C:\glfw for simplicity).
Compile:
For Windows users, there is a batch file which allows to compile using a variety of compilers.
Open a DOS window, cd to the directory where GLFW lives (e.g. C:\glfw), and type
compile make mgw
Building the Libraries
As you can see there is a compile.bat
Of course you have to cd to your source folder. From an folder outside the source a compile.bat will not work.
if in your source there is no compile download it here.
glfw-2.5.zip
I downloaded
Ruben’s build of
Cygwin GCC.
However upon running it seems unable to compile any files
$ touch foo.c
$ gcc foo.c
gcc: error: spawn: No such file or directory
As a workaround, I found this to work
i686-w64-mingw32-gcc foo.c
I had the same problem and solved it by installing the g++ package in addition to gcc-core
I had this same problem on Cygwin64, and the solution was PATH related..kinda.
Turns out, there are copies of gcc in /usr/bin and /bin (at least, there is in my install).
Executing /bin/gcc failed with the error above -- I'm guessing due to incorrectly assumed relative paths???
Executing /usr/bin/gcc works as expected!
In my case, the "problem" was that I had inadvertently injected "/bin" into my PATH environment variable, resulting in /bin/gcc being executed, instead of /usr/bin/gcc. Removing the "/bin" from the path solved the problem.
Still unclear why there are two gcc binaries (which appear to be identical) in different places... but maybe the Cygwin gurus can answer that; or maybe my installation is just foo-barred.
Ruben's builds are not Cygwin GCC packages, rather they are cross-compilers which run on various platforms but target native Windows using the MinGW-w64 toolchain.
In any case, you shouldn't be using them on Cygwin. If you want to compile Cygwin executables, install the gcc4 packages; if you want to cross-compile for Windows, install the mingw64-i686-gcc (for Win32) or mingw64-x86_64-gcc (for Win64) packages instead.
Gcc isn't really the compiler. It's a front end program that orchestrates the execution of any necessary compiler, assembler, and linker components. Typically these others are separately compiled programs.
So, gcc is trying (kind of) to tell you that it can't find the compiler. I guess it needs to be on your PATH or in an expected location.
If you are executing this from a Windows DOS box then it definitely needs a windows PATH setting.
I like to install Cygwin, making sure to include rxvt. At that point, you can configure a purely sh(1) path and your environment is rather more civilized.
I had the same error when I tried to extract a couple of executables from cygwin installation dirctory and copied them into another location.
strace shows me the file which was not found by spawn:
/lib/gcc/x86_64-pc-cygwin/6.4.0/cc1.exe
When I copied cc1.exe into the location relative to
<dir with sh.exe and cpp.exe>/../lib/gcc/x86_64-pc-cygwin/6.4.0/cc1.exe
it works fine.
This error occurs whenever cygwin cc can't find a required file.
For those running stuff within cygwin's bin directly from a Windows shell, a gotcha to watch out for is that Windows allow you to run programs from the command line like this:
e:cyg/bin/gcc -flags
Notice that there is no slash between e: and cyg.
So this command would successfully start cygwin gcc from the Windows shell, but halfway through the run it will error out because some component(s) of gcc will utilize the first argument of the input e:cyg/bin/gcc and unlike mingw, this is not a valid path for cygwin gcc.
This can be fixed simply by changing the command to:
e:/cyg/bin/gcc -flags
Notice the slash in between e: and cyg.
A similar gotcha is due to Windows allowing paths like e:/../folder1 as an alternative to e:/folder1. Windows does not give you an error if you are at the root folder and try to go up another folder using ...
So you could start running cygwin gcc using the command:
e:/../cyg/bin/gcc -flags
..or even:
e:/../../../../../../../../../cyg/bin/gcc -flags
However, it would fail halfway with gcc: error: spawn: No such file or directory because some component(s) of cygwin gcc would attempt to run gcc using the first argument of the command input itself, and unlike mingw, e:/../cyg/bin/gcc is not recognized as a valid path by cygwin because you are going up a folder when there's no folder to go up to.
As like above, this can be fixed by keeping the path valid:
e:/cyg/bin/gcc -flags
Make sure the source file extension is in lowercase (i.e. main.c, not main.C):
$ gcc -o main main.C
$ gcc: error: spawn: No such file or directory
$ gcc -o main main.c
$ # all good
This only refers to the case of the extension as given to the gcc, the actual source file can have the extension in whatever case you want.
Explanation: This is from my experimenting with cygwin and gcc, I don't know the actual reason for this behavior.
This shoud be a simple problem for users more advanced than I am. :-)
How do I use the boost library with cygwin on windows?
I am programing with g++ using cygwin on a winxp machine.
I need modified Bessel functions of the second order, so I downloaded the latest version of the boost library and installed it in
'c:\cygwin\lib\boost_ 1_ 38_0\' folder.
I am trying to run the "example.cpp" program from the "getting started" section of their website:
http://www.boost.org/doc/libs/1_35_0/more/getting_started/unix-variants.html
I am compiling from the directory where I created the example file using a simple Bash shell command line: 'g++ -Wall example.cpp'
I keep getting the message:
"boost/lambda/lambda.hpp: no such file or directory"
I tried every possible combination of -L, -l, -I options in the command line to include the directory, to no avail. Also tried to add the folder in the PATH line of my windows system.
How do I link to the /boost directory and ALSO to all subdirectories? The header file 'lambda.hpp' is calling other header files in subdirectories.
You're probably not that familiar with C++ yet? It seems you are confusing terms.
C++ programs are built in two steps: compiling and linking. In the first step, each source file (typically called .cpp) is handled individually. Each .cpp file usually uses multiple headers, so the compiler first inserts those - literally. That's why it's called #include.
In the second step, the linker takes all the compiled .cpp files together and builds your final program. Some of those compiled .cpp's might have been bundled together before, in which the bundle is called a library.
Boost is a collection of headers and .cpp files. So, both compiler and linker might need to find the Boost directories. From your error message, it's clear that the compiler step is the problem. The linker does not need headers anymore.
The compiler will see the #include <boost/lambda/lambda.hpp> instuction. That means it needs to know where that first-level boost directory is found. I would guess at this point that the path would be /lib/boost_ 1_ 38_0/include (there's always the find / -name lambda.hpp shotgun appraoch)
If you are not utterly wedded to cygwin, you should take a look at http://nuwen.net/mingw.html which gives you a complete MinGW C++ installation with all the libraries (such as Boost) set up for you.
Edit: I should make it clear you can use this MinGW installation in addition to Cygwin, not as a replacement. Just make sure the MinGW bin directory appears in your PATH before the Cygwin one.
I think you need -I /lib/boost_1_38_0 - although that's a pretty unusual place to put it. You'll have to let us know how you installed it, did you just unzip it in the location you said, or did you run the makefiles? I assume that since you gave a windows path you didn't install it within cygwin - which you probably should do. The instructions in the getting started guide for unix should help - although don't download a prebuilt bjam - it needs to be built with cygwin.
But if you're not very familiar with cygwin (or unix in general) I think you might find it easier to use a native windows tool - as in Neil Butterworth's answer.
Thank you all for the information, it's a nice introduction to the use of libraries with cygwin.
Daniel was right. While any variation gives an error, the following line (using caps i) does the trick:
g++ -Wall -I /cygdrive/c/cygwin/lib/boost_1_38_0/ example.cpp -o example
I will also check MinGW in the next few days.
p.s. I simply downloaded and unzipped boost in that folder, but since I am only using header files I probably won't need to compile with cygwin. [The boost version included with cygwin was 1.33, which does not seem to have Bessel functions.]
This is on win7 cygwin64 g++ 5.4, and boost-1.64.7z on 2017-7. Google doesn't show any useful result for getting started for boost on windows (is boost out of fashion?).
By experimenting, I managed to compile and run a boost graph sample program as follows:
:: g++ 5.4 in c:\cygwin64
:: 7z extract boost download in c:\tools\boost\boost164
> set BOOST_ROOT=c:\tools\boost\boost164
> setx BOOST_ROOT c:\tools\boost\boost164 -m
> cd %BOOST_ROOT%
> bootstrap.sh gcc (the bat files doesn't work)
> b2.exe
...failed updating 58 targets...
...skipped 18 targets...
...updated 1123 targets...
:: Lots of example here (not ranked highly by google)
> mklink /D eg %BOOST_ROOT%/libs/graph/example
:: Compiled and run [maxflow code using boost library][1]
:: http://vision.csd.uwo.ca/code
> unzip ; vi Makefile
CPPFLAGS = -I %BOOST_ROOT%/
LDFLAGS = -L%BOOST_ROOT%/stage/lib
> make
> set PATH=%PATH%;%BOOST_ROOT%/stage/lib
> maxflow.exe
Flow = 6