I have a set of A's and a set of B's, each with an associated numerical priority, where each A may match some or all B's and vice versa, and my main loop basically consists of:
Take the best A and B in priority order, and do stuff with A and B.
The most obvious way to do this is with a single priority queue of (A,B) pairs, but if there are 100,000 A's and 100,000 B's then the set of O(N^2) pairs won't fit in memory (and disk is too slow).
Another possibility is for each A, loop through every B. However this means that global priority ordering is by A only, and I really need to take priority of both components into account.
(The application is theorem proving, where the above options are called the pair algorithm and the given clause algorithm respectively; the shortcomings of each are known, but I haven't found any reference to a good solution.)
Some kind of two layer priority queue would seem indicated, but it's not clear how to do this without using either O(N^2) memory or O(N^2) time in the worst case.
Is there a known method of doing this?
Clarification: each A must be processed with all corresponding B's, not just one.
Maybe there's something I'm not understanding but,
Why not keep the A's and B's in separate heaps, get_Max on each of the heaps, do your work, remove each max from its associated heap and continue?
You could handle the best pairs first, and if nothing good comes up mop up the rest with the given clause algorithm for completeness' sake. This may lead to some double work, but I'd bet that this is insignificant.
Have you considered ordered paramodulation or superposition?
It appears that the items in A have an individual priority, the items in B have an individual priority, and the (A,B) pairs have a combined priority. Only the combined priority matters, but hopefully we can use the individual properties along the way. However, there is also a matching relation between items in A and items in B that is independent priority.
I assume that, for all a in A, b1 and b2 in B, such that Match(a,b1) and Match(a,b2), then Priority(b1) >= Priority(b2) implies CombinedPriority(a,b1) >= CombinedPriority(a,b2).
Now, begin by sorting B in decreasing order priority. Let B(j) indicate the jth element in this sorted order. Also, let A(i) indicate the ith element of A (which may or may not be in sorted order).
Let nextb(i,j) be a function that finds the smallest j' >= j such that Match(A(i),B(j')). If no such j' exists, the function returns null (or some other suitable error value). Searching for j' may just involve looping upward from j, or we may be able to do something faster if we know more about the structure of the Match relation.
Create a priority queue Q containing (i,nextb(i,0)) for all indices i in A such that nextb(i,0) != null. The pairs (i,j) in Q are ordered by CombinedPriority(A(i),B(j)).
Now just loop until Q is empty. Pull out the highest-priority pair (i,j) and process (A(i),B(j)) appropriately. Then re-insert (i,nextb(i,j+1)) into Q (unless nextb(i,j+1) is null).
Altogether, this takes O(N^2 log N) time in the worst case that all pairs match. In general, it takes O(N^2 + M log N) where M are the number of matches. The N^2 component can be reduced if there is a faster way of calculating nextb(i,j) that just looping upward, but that depends on knowledge of the Match relation.
(In the above analysis, I assumed both A and B were of size N. The formulas could easily be modified if they are different sizes.)
You seemed to want something better than O(N^2) time in the worst case, but if you need to process every match, then you have a lower bound of M, which can be N^2 itself. I don't think you're going to be able to do better than O(N^2 log N) time unless there is some special structure to the combined priority that lets you use a better-than-log-N priority queue.
So you have a Set of A's, and a set of B's, and you need to pick a (A, B) pair from this set such that some f(a, b) is the highest of any other (A, B) pair.
This means you can either store all possible (A, B) pairs and order them, and just pick the highest each time through the loop (O(1) per iteration but O(N*M) memory).
Or you could loop through all possible pairs and keep track of the current maximum and use that (O(N*M) per iteration, but only O(N+M) memory).
If I am understanding you correctly this is what you are asking.
I think it very much depends on f() to determine if there is a better way to do it.
If f(a, b) = a + b, then it is obviously very simple, the highest A, and the highest B are what you want.
I think your original idea will work, you just need to keep your As and Bs in separate collections and just stick references to them in your priority queue. If each reference takes 16 bytes (just to pick a number), then 10,000,000 A/B references will only take ~300M. Assuming your As and Bs themselves aren't too big, it should be workable.
Related
I have n variables (Var 1 ... Var n) and do not know their exact values. The n choose 2 pairwise ordering between these n variables are known. For instance, it is known that Var 5 <= Var 9, Var 9 <= Var 10 and so on for all pairs. Further, it is also known that these pairwise orderings are consistent and do not lead to a degenerate case of equality throughout. That is, in the above example the inequality Var 10 <= Var 5 will not be present.
What is the most efficient sorting algorithm for such problems which gives a sorting of all variables?
Pairwise ordering is the only thing that any (comparison-based) sort needs anyway, so your question boils down to "what's the most efficient comparison-based sorting algorithm".
In answer to that, I recommend you look into Quicksort, Heapsort, Timsort, possibly Mergesort and see what will work well for your case in terms of memory requirements, programming complexity etc.
I find Quicksort the quickest to implement for a once-off program.
The question is not so much how to sort (use the standard sort of your language) but how to feed the sort criterion to the sorting algorithm.
In most languages you need to provide a int comparison (T a, T b) where T is the type of elements, that returns -1, 0 or 1 depending on who is larger.
So you need a fast access to the data structure storing (all) pairwise orderings, given a pair of elements.
So the question is not so much will Var 10 <= Var 5 be present (inconsistent) but more is Var 5 <= Var 10 ensured to be present ? If this is the case, you can test presence of the constraint in O(1) with a hash set of pairs of elements, otherwise, you need to find a transitive relationship between a and b, which might not even exist (it's unclear from OP if we are talking of a partial or total order, i.e. for all a,b we ensure a < b or b < a or a = b (total order).
With roughly worst case N^2 entries, this hash is pretty big. Building it still requires exploring transitive links which is costly.
Following links probably means a map of elements to sets of (immediately) smaller elements, when comparing a to b, if (map(a) contains b) or (map(b) contains a) you can answer immediately, otherwise you need to recurse on the elements of map(a) and map(b), with pretty bad complexity. Ultimately you'll still be cumulating sets of smaller values to build your test.
Perhaps if you have a low number of constraints a <= b, just applying a permutation of a and b when they do not respect the constraint and iterating over the constraints to fixpoint (all constraints applied in one full round with no effect) could be more efficient. At least it's O(1) in memory.
A variant of that could be sorting using a stable sort (preserves order of incomparable entries) several times with subsets of the constraints.
Last idea, computing a Max with your input data is O(number of constraints), so you could just repeatedly compute the Max, add it at the end of the target, remove constraints that use it, rinse and repeat. I'd use a stack to store the largest element up to a given constraint index, so you can backtrack to that rather than restart from scratch.
I'm looking for a sorting algorithm that honors a min and max range for each element1. The problem domain is a recommendations engine that combines a set of business rules (the restrictions) with a recommendation score (the value). If we have a recommendation we want to promote (e.g. a special product or deal) or an announcement we want to appear near the top of the list (e.g. "This is super important, remember to verify your email address to participate in an upcoming promotion!") or near the bottom of the list (e.g. "If you liked these recommendations, click here for more..."), they will be curated with certain position restriction in place. For example, this should always be the top position, these should be in the top 10, or middle 5 etc. This curation step is done ahead of time and remains fixed for a given time period and for business reasons must remain very flexible.
Please don't question the business purpose, UI or input validation. I'm just trying to implement the algorithm in the constraints I've been given. Please treat this as an academic question. I will endeavor to provide a rigorous problem statement, and feedback on all other aspects of the problem is very welcome.
So if we were sorting chars, our data would have a structure of
struct {
char value;
Integer minPosition;
Integer maxPosition;
}
Where minPosition and maxPosition may be null (unrestricted). If this were called on an algorithm where all positions restrictions were null, or all minPositions were 0 or less and all maxPositions were equal to or greater than the size of the list, then the output would just be chars in ascending order.
This algorithm would only reorder two elements if the minPosition and maxPosition of both elements would not be violated by their new positions. An insertion-based algorithm which promotes items to the top of the list and reorders the rest has obvious problems in that every later element would have to be revalidated after each iteration; in my head, that rules out such algorithms for having O(n3) complexity, but I won't rule out such algorithms without considering evidence to the contrary, if presented.
In the output list, certain elements will be out of order with regard to their value, if and only if the set of position constraints dictates it. These outputs are still valid.
A valid list is any list where all elements are in a position that does not conflict with their constraints.
An optimal list is a list which cannot be reordered to more closely match the natural order without violating one or more position constraint. An invalid list is never optimal. I don't have a strict definition I can spell out for 'more closely matching' between one ordering or another. However, I think it's fairly easy to let intuition guide you, or choose something similar to a distance metric.
Multiple optimal orderings may exist if multiple inputs have the same value. You could make an argument that the above paragraph is therefore incorrect, because either one can be reordered to the other without violating constraints and therefore neither can be optimal. However, any rigorous distance function would treat these lists as identical, with the same distance from the natural order and therefore reordering the identical elements is allowed (because it's a no-op).
I would call such outputs the correct, sorted order which respects the position constraints, but several commentators pointed out that we're not really returning a sorted list, so let's stick with 'optimal'.
For example, the following are a input lists (in the form of <char>(<minPosition>:<maxPosition>), where Z(1:1) indicates a Z that must be at the front of the list and M(-:-) indicates an M that may be in any position in the final list and the natural order (sorted by value only) is A...M...Z) and their optimal orders.
Input order
A(1:1) D(-:-) C(-:-) E(-:-) B(-:-)
Optimal order
A B C D E
This is a trivial example to show that the natural order prevails in a list with no constraints.
Input order
E(1:1) D(2:2) C(3:3) B(4:4) A(5:5)
Optimal order
E D C B A
This example is to show that a fully constrained list is output in the same order it is given. The input is already a valid and optimal list. The algorithm should still run in O(n log n) time for such inputs. (Our initial solution is able to short-circuit any fully constrained list to run in linear time; I added the example both to drive home the definitions of optimal and valid and because some swap-based algorithms I considered handled this as the worse case.)
Input order
E(1:1) C(-:-) B(1:5) A(4:4) D(2:3)
Optimal Order
E B D A C
E is constrained to 1:1, so it is first in the list even though it has the lowest value. A is similarly constrained to 4:4, so it is also out of natural order. B has essentially identical constraints to C and may appear anywhere in the final list, but B will be before C because of value. D may be in positions 2 or 3, so it appears after B because of natural ordering but before C because of its constraints.
Note that the final order is correct despite being wildly different from the natural order (which is still A,B,C,D,E). As explained in the previous paragraph, nothing in this list can be reordered without violating the constraints of one or more items.
Input order
B(-:-) C(2:2) A(-:-) A(-:-)
Optimal order
A(-:-) C(2:2) A(-:-) B(-:-)
C remains unmoved because it already in its only valid position. B is reordered to the end because its value is less than both A's. In reality, there will be additional fields that differentiate the two A's, but from the standpoint of the algorithm, they are identical and preserving OR reversing their input ordering is an optimal solution.
Input order
A(1:1) B(1:1) C(3:4) D(3:4) E(3:4)
Undefined output
This input is invalid for two reasons: 1) A and B are both constrained to position 1 and 2) C, D, and E are constrained to a range than can only hold 2 elements. In other words, the ranges 1:1 and 3:4 are over-constrained. However, the consistency and legality of the constraints are enforced by UI validation, so it's officially not the algorithms problem if they are incorrect, and the algorithm can return a best-effort ordering OR the original ordering in that case. Passing an input like this to the algorithm may be considered undefined behavior; anything can happen. So, for the rest of the question...
All input lists will have elements that are initially in valid positions.
The sorting algorithm itself can assume the constraints are valid and an optimal order exists.2
We've currently settled on a customized selection sort (with runtime complexity of O(n2)) and reasonably proved that it works for all inputs whose position restrictions are valid and consistent (e.g. not overbooked for a given position or range of positions).
Is there a sorting algorithm that is guaranteed to return the optimal final order and run in better than O(n2) time complexity?3
I feel that a library standard sorting algorithm could be modified to handle these constrains by providing a custom comparator that accepts the candidate destination position for each element. This would be equivalent to the current position of each element, so maybe modifying the value holding class to include the current position of the element and do the extra accounting in the comparison (.equals()) and swap methods would be sufficient.
However, the more I think about it, an algorithm that runs in O(n log n) time could not work correctly with these restrictions. Intuitively, such algorithms are based on running n comparisons log n times. The log n is achieved by leveraging a divide and conquer mechanism, which only compares certain candidates for certain positions.
In other words, input lists with valid position constraints (i.e. counterexamples) exist for any O(n log n) sorting algorithm where a candidate element would be compared with an element (or range in the case of Quicksort and variants) with/to which it could not be swapped, and therefore would never move to the correct final position. If that's too vague, I can come up with a counter example for mergesort and quicksort.
In contrast, an O(n2) sorting algorithm makes exhaustive comparisons and can always move an element to its correct final position.
To ask an actual question: Is my intuition correct when I reason that an O(n log n) sort is not guaranteed to find a valid order? If so, can you provide more concrete proof? If not, why not? Is there other existing research on this class of problem?
1: I've not been able to find a set of search terms that points me in the direction of any concrete classification of such sorting algorithm or constraints; that's why I'm asking some basic questions about the complexity. If there is a term for this type of problem, please post it up.
2: Validation is a separate problem, worthy of its own investigation and algorithm. I'm pretty sure that the existence of a valid order can be proven in linear time:
Allocate array of tuples of length equal to your list. Each tuple is an integer counter k and a double value v for the relative assignment weight.
Walk the list, adding the fractional value of each elements position constraint to the corresponding range and incrementing its counter by 1 (e.g. range 2:5 on a list of 10 adds 0.4 to each of 2,3,4, and 5 on our tuple list, incrementing the counter of each as well)
Walk the tuple list and
If no entry has value v greater than the sum of the series from 1 to k of 1/k, a valid order exists.
If there is such a tuple, the position it is in is over-constrained; throw an exception, log an error, use the doubles array to correct the problem elements etc.
Edit: This validation algorithm itself is actually O(n2). Worst case, every element has the constraints 1:n, you end up walking your list of n tuples n times. This is still irrelevant to the scope of the question, because in the real problem domain, the constraints are enforced once and don't change.
Determining that a given list is in valid order is even easier. Just check each elements current position against its constraints.
3: This is admittedly a little bit premature optimization. Our initial use for this is for fairly small lists, but we're eyeing expansion to longer lists, so if we can optimize now we'd get small performance gains now and large performance gains later. And besides, my curiosity is piqued and if there is research out there on this topic, I would like to see it and (hopefully) learn from it.
On the existence of a solution: You can view this as a bipartite digraph with one set of vertices (U) being the k values, and the other set (V) the k ranks (1 to k), and an arc from each vertex in U to its valid ranks in V. Then the existence of a solution is equivalent to the maximum matching being a bijection. One way to check for this is to add a source vertex with an arc to each vertex in U, and a sink vertex with an arc from each vertex in V. Assign each edge a capacity of 1, then find the max flow. If it's k then there's a solution, otherwise not.
http://en.wikipedia.org/wiki/Maximum_flow_problem
--edit-- O(k^3) solution: First sort to find the sorted rank of each vertex (1-k). Next, consider your values and ranks as 2 sets of k vertices, U and V, with weighted edges from each vertex in U to all of its legal ranks in V. The weight to assign each edge is the distance from the vertices rank in sorted order. E.g., if U is 10 to 20, then the natural rank of 10 is 1. An edge from value 10 to rank 1 would have a weight of zero, to rank 3 would have a weight of 2. Next, assume all missing edges exist and assign them infinite weight. Lastly, find the "MINIMUM WEIGHT PERFECT MATCHING" in O(k^3).
http://www-math.mit.edu/~goemans/18433S09/matching-notes.pdf
This does not take advantage of the fact that the legal ranks for each element in U are contiguous, which may help get the running time down to O(k^2).
Here is what a coworker and I have come up with. I think it's an O(n2) solution that returns a valid, optimal order if one exists, and a closest-possible effort if the initial ranges were over-constrained. I just tweaked a few things about the implementation and we're still writing tests, so there's a chance it doesn't work as advertised. This over-constrained condition is detected fairly easily when it occurs.
To start, things are simplified if you normalize your inputs to have all non-null constraints. In linear time, that is:
for each item in input
if an item doesn't have a minimum position, set it to 1
if an item doesn't have a maximum position, set it to the length of your list
The next goal is to construct a list of ranges, each containing all of the candidate elements that have that range and ordered by the remaining capacity of the range, ascending so ranges with the fewest remaining spots are on first, then by start position of the range, then by end position of the range. This can be done by creating a set of such ranges, then sorting them in O(n log n) time with a simple comparator.
For the rest of this answer, a range will be a simple object like so
class Range<T> implements Collection<T> {
int startPosition;
int endPosition;
Collection<T> items;
public int remainingCapacity() {
return endPosition - startPosition + 1 - items.size();
}
// implement Collection<T> methods, passing through to the items collection
public void add(T item) {
// Validity checking here exposes some simple cases of over-constraining
// We'll catch these cases with the tricky stuff later anyways, so don't choke
items.add(item);
}
}
If an element A has range 1:5, construct a range(1,5) object and add A to its elements. This range has remaining capacity of 5 - 1 + 1 - 1 (max - min + 1 - size) = 4. If an element B has range 1:5, add it to your existing range, which now has capacity 3.
Then it's a relatively simple matter of picking the best element that fits each position 1 => k in turn. Iterate your ranges in their sorted order, keeping track of the best eligible element, with the twist that you stop looking if you've reached a range that has a remaining size that can't fit into its remaining positions. This is equivalent to the simple calculation range.max - current position + 1 > range.size (which can probably be simplified, but I think it's most understandable in this form). Remove each element from its range as it is selected. Remove each range from your list as it is emptied (optional; iterating an empty range will yield no candidates. That's a poor explanation, so lets do one of our examples from the question. Note that C(-:-) has been updated to the sanitized C(1:5) as described in above.
Input order
E(1:1) C(1:5) B(1:5) A(4:4) D(2:3)
Built ranges (min:max) <remaining capacity> [elements]
(1:1)0[E] (4:4)0[A] (2:3)1[D] (1:5)3[C,B]
Find best for 1
Consider (1:1), best element from its list is E
Consider further ranges?
range.max - current position + 1 > range.size ?
range.max = 1; current position = 1; range.size = 1;
1 - 1 + 1 > 1 = false; do not consider subsequent ranges
Remove E from range, add to output list
Find best for 2; current range list is:
(4:4)0[A] (2:3)1[D] (1:5)3[C,B]
Consider (4:4); skip it because it is not eligible for position 2
Consider (2:3); best element is D
Consider further ranges?
3 - 2 + 1 > 1 = true; check next range
Consider (2:5); best element is B
End of range list; remove B from range, add to output list
An added simplifying factor is that the capacities do not need to be updated or the ranges reordered. An item is only removed if the rest of the higher-sorted ranges would not be disturbed by doing so. The remaining capacity is never checked after the initial sort.
Find best for 3; output is now E, B; current range list is:
(4:4)0[A] (2:3)1[D] (1:5)3[C]
Consider (4:4); skip it because it is not eligible for position 3
Consider (2:3); best element is D
Consider further ranges?
same as previous check, but current position is now 3
3 - 3 + 1 > 1 = false; don't check next range
Remove D from range, add to output list
Find best for 4; output is now E, B, D; current range list is:
(4:4)0[A] (1:5)3[C]
Consider (4:4); best element is A
Consider further ranges?
4 - 4 + 1 > 1 = false; don't check next range
Remove A from range, add to output list
Output is now E, B, D, A and there is one element left to be checked, so it gets appended to the end. This is the output list we desired to have.
This build process is the longest part. At its core, it's a straightforward n2 selection sorting algorithm. The range constraints only work to shorten the inner loop and there is no loopback or recursion; but the worst case (I think) is still sumi = 0 n(n - i), which is n2/2 - n/2.
The detection step comes into play by not excluding a candidate range if the current position is beyond the end of that ranges max position. You have to track the range your best candidate came from in order to remove it, so when you do the removal, just check if the position you're extracting the candidate for is greater than that ranges endPosition.
I have several other counter-examples that foiled my earlier algorithms, including a nice example that shows several over-constraint detections on the same input list and also how the final output is closest to the optimal as the constraints will allow. In the mean time, please post any optimizations you can see and especially any counter examples where this algorithm makes an objectively incorrect choice (i.e. arrives at an invalid or suboptimal output when one exists).
I'm not going to accept this answer, because I specifically asked if it could be done in better than O(n2). I haven't wrapped my head around the constraints satisfaction approach in #DaveGalvin's answer yet and I've never done a maximum flow problem, but I thought this might be helpful for others to look at.
Also, I discovered the best way to come up with valid test data is to start with a valid list and randomize it: for 0 -> i, create a random value and constraints such that min < i < max. (Again, posting it because it took me longer than it should have to come up with and others might find it helpful.)
Not likely*. I assume you mean average run time of O(n log n) in-place, non-stable, off-line. Most Sorting algorithms that improve on bubble sort average run time of O(n^2) like tim sort rely on the assumption that comparing 2 elements in a sub set will produce the same result in the super set. A slower variant of Quicksort would be a good approach for your range constraints. The worst case won't change but the average case will likely decrease and the algorithm will have the extra constraint of a valid sort existing.
Is ... O(n log n) sort is not guaranteed to find a valid order?
All popular sort algorithms I am aware of are guaranteed to find an order so long as there constraints are met. Formal analysis (concrete proof) is on each sort algorithems wikepedia page.
Is there other existing research on this class of problem?
Yes; there are many journals like IJCSEA with sorting research.
*but that depends on your average data set.
(I'm banging my head here. Let X={x1,x2,...,xn} is an integer set. Let A1,A2,...Am be the m subsets of X. For any i and j, Ai and Aj are not necessarily disjoint. Now the goal is to find the maximal value on each Ai (i=1,...,m) efficiently, with the number of operations as fewer as possible.
For example, given X={2,4,6,3,1}, and its subsets A1={2,3,1}, A2={2,6,3,1}, A3={4,2,3,1}. We need to find Max{A1}, Max{A2}, Max{A3}, respectively.
The brute-force way for finding Max{A1}, Max{A2}, Max{A3} is to scan all the elements in each Ai, and (m*d) operations are required, with m the number of subsets of X, and d the average length of the subsets {Ai} of X.
Now, I have some observations:
(1) For any set Y⊆X, max{Y}≤max{X},
For instance, since Max{X}=6 and 6 is in A2, then Max{A2}=6 can be found directly.
(2) For any two sets A and B, if A∩B is non-empty, Max{A} and Max{B} can be identified as follows:
First, we find the common parts between A and B, deonted as c=max{A∩B}.
Then, we find Max{A}=Max{Max{A-(A∩B)}, c} and Max{B}=Max{Max{B-(A∩B)}, c}.
I am not sure whether there are some other interesting obervations for find these max values.
Any ideas are warmly welcome!
My question is what if for the general case when X={x1,x2,...,xn} and there are m subsets of X, denoted as A1,A2,...Am, is there some more efficient techniques to find such max values Max{Ai} (i=1,...,m) ?
Your help will be highly appreciated!
There is no method asymptotically better than brute force, assuming a typical representation of the given sets. Simply scanning through the sets to find the largest member of each requires linear time and linear time is optimal since every member of the set must be read in order to determine the maximum value.
Now if the input representation is not simply a listing of the elements in each set, than other bounds and algorithms may apply. For example, if we know the input sets are sorted and the length of the set is given as part of the input, we can obviously find the maximum elements in time linear only on the number of subsets but not on their length.
If your sets are implemented in a hash (or, more generally, if you can otherwise check for the presence of a value in the set in O(1) time) you can improve on a brute-force approach.
Instead of iterating through the elements of the subset and maintaining the maximum, iterate over the elements of the parent set in descending order, checking for the presence of those elements in the subset. The first found element is necessarily the subset's maximum. Technically, this still takes O(n) time (n = subset carnality) in the general case, but will generally carry a great performance benefit in practice. (If you have any data regarding the number and size of the subsets, and they favor this approach, you can improve on O(n) in the average case.)
This approach requires sorting of the parent set's elements (n log n), however, so it may only be worthwhile if the number of subsets is much greater than the carnality of the parent set.
The setup: I have two arrays which are not sorted and are not of the same length. I want to see if one of the arrays is a subset of the other. Each array is a set in the sense that there are no duplicates.
Right now I am doing this sequentially in a brute force manner so it isn't very fast. I am currently doing this subset method sequentially. I have been having trouble finding any algorithms online that A) go faster and B) are in parallel. Say the maximum size of either array is N, then right now it is scaling something like N^2. I was thinking maybe if I sorted them and did something clever I could bring it down to something like Nlog(N), but not sure.
The main thing is I have no idea how to parallelize this operation at all. I could just do something like each processor looks at an equal amount of the first array and compares those entries to all of the second array, but I'd still be doing N^2 work. But I guess it'd be better since it would run in parallel.
Any Ideas on how to improve the work and make it parallel at the same time?
Thanks
Suppose you are trying to decide if A is a subset of B, and let len(A) = m and len(B) = n.
If m is a lot smaller than n, then it makes sense to me that you sort A, and then iterate through B doing a binary search for each element on A to see if there is a match or not. You can partition B into k parts and have a separate thread iterate through every part doing the binary search.
To count the matches you can do 2 things. Either you could have a num_matched variable be incremented every time you find a match (You would need to guard this var using a mutex though, which might hinder your program's concurrency) and then check if num_matched == m at the end of the program. Or you could have another array or bit vector of size m, and have a thread update the k'th bit if it found a match for the k'th element of A. Then at the end, you make sure this array is all 1's. (On 2nd thoughts bit vector might not work out without a mutex because threads might overwrite each other's annotations when they load the integer containing the bit relevant to them). The array approach, atleast, would not need any mutex that can hinder concurrency.
Sorting would cost you mLog(m) and then, if you only had a single thread doing the matching, that would cost you nLog(m). So if n is a lot bigger than m, this would effectively be nLog(m). Your worst case still remains NLog(N), but I think concurrency would really help you a lot here to make this fast.
Summary: Just sort the smaller array.
Alternatively if you are willing to consider converting A into a HashSet (or any equivalent Set data structure that uses some sort of hashing + probing/chaining to give O(1) lookups), then you can do a single membership check in just O(1) (in amortized time), so then you can do this in O(n) + the cost of converting A into a Set.
Is there a way to generate all of the subset sums s1, s2, ..., sk that fall in a range [A,B] faster than O((k+N)*2N/2), where k is the number of sums there are in [A,B]? Note that k is only known after we have enumerated all subset sums within [A,B].
I'm currently using a modified Horowitz-Sahni algorithm. For example, I first call it to for the smallest sum greater than or equal to A, giving me s1. Then I call it again for the next smallest sum greater than s1, giving me s2. Repeat this until we find a sum sk+1 greater than B. There is a lot of computation repeated between each iteration, even without rebuilding the initial two 2N/2 lists, so is there a way to do better?
In my problem, N is about 15, and the magnitude of the numbers is on the order of millions, so I haven't considered the dynamic programming route.
Check the subset sum on Wikipedia. As far as I know, it's the fastest known algorithm, which operates in O(2^(N/2)) time.
Edit:
If you're looking for multiple possible sums, instead of just 0, you can save the end arrays and just iterate through them again (which is roughly an O(2^(n/2) operation) and save re-computing them. The value of all the possible subsets is doesn't change with the target.
Edit again:
I'm not wholly sure what you want. Are we running K searches for one independent value each, or looking for any subset that has a value in a specific range that is K wide? Or are you trying to approximate the second by using the first?
Edit in response:
Yes, you do get a lot of duplicate work even without rebuilding the list. But if you don't rebuild the list, that's not O(k * N * 2^(N/2)). Building the list is O(N * 2^(N/2)).
If you know A and B right now, you could begin iteration, and then simply not stop when you find the right answer (the bottom bound), but keep going until it goes out of range. That should be roughly the same as solving subset sum for just one solution, involving only +k more ops, and when you're done, you can ditch the list.
More edit:
You have a range of sums, from A to B. First, you solve subset sum problem for A. Then, you just keep iterating and storing the results, until you find the solution for B, at which point you stop. Now you have every sum between A and B in a single run, and it will only cost you one subset sum problem solve plus K operations for K values in the range A to B, which is linear and nice and fast.
s = *i + *j; if s > B then ++i; else if s < A then ++j; else { print s; ... what_goes_here? ... }
No, no, no. I get the source of your confusion now (I misread something), but it's still not as complex as what you had originally. If you want to find ALL combinations within the range, instead of one, you will just have to iterate over all combinations of both lists, which isn't too bad.
Excuse my use of auto. C++0x compiler.
std::vector<int> sums;
std::vector<int> firstlist;
std::vector<int> secondlist;
// Fill in first/secondlist.
std::sort(firstlist.begin(), firstlist.end());
std::sort(secondlist.begin(), secondlist.end());
auto firstit = firstlist.begin();
auto secondit = secondlist.begin();
// Since we want all in a range, rather than just the first, we need to check all combinations. Horowitz/Sahni is only designed to find one.
for(; firstit != firstlist.end(); firstit++) {
for(; secondit = secondlist.end(); secondit++) {
int sum = *firstit + *secondit;
if (sum > A && sum < B)
sums.push_back(sum);
}
}
It's still not great. But it could be optimized if you know in advance that N is very large, for example, mapping or hashmapping sums to iterators, so that any given firstit can find any suitable partners in secondit, reducing the running time.
It is possible to do this in O(N*2^(N/2)), using ideas similar to Horowitz Sahni, but we try and do some optimizations to reduce the constants in the BigOh.
We do the following
Step 1: Split into sets of N/2, and generate all possible 2^(N/2) sets for each split. Call them S1 and S2. This we can do in O(2^(N/2)) (note: the N factor is missing here, due to an optimization we can do).
Step 2: Next sort the larger of S1 and S2 (say S1) in O(N*2^(N/2)) time (we optimize here by not sorting both).
Step 3: Find Subset sums in range [A,B] in S1 using binary search (as it is sorted).
Step 4: Next, for each sum in S2, find using binary search the sets in S1 whose union with this gives sum in range [A,B]. This is O(N*2^(N/2)). At the same time, find if that corresponding set in S2 is in the range [A,B]. The optimization here is to combine loops. Note: This gives you a representation of the sets (in terms of two indexes in S2), not the sets themselves. If you want all the sets, this becomes O(K + N*2^(N/2)), where K is the number of sets.
Further optimizations might be possible, for instance when sum from S2, is negative, we don't consider sums < A etc.
Since Steps 2,3,4 should be pretty clear, I will elaborate further on how to get Step 1 done in O(2^(N/2)) time.
For this, we use the concept of Gray Codes. Gray codes are a sequence of binary bit patterns in which each pattern differs from the previous pattern in exactly one bit.
Example: 00 -> 01 -> 11 -> 10 is a gray code with 2 bits.
There are gray codes which go through all possible N/2 bit numbers and these can be generated iteratively (see the wiki page I linked to), in O(1) time for each step (total O(2^(N/2)) steps), given the previous bit pattern, i.e. given current bit pattern, we can generate the next bit pattern in O(1) time.
This enables us to form all the subset sums, by using the previous sum and changing that by just adding or subtracting one number (corresponding to the differing bit position) to get the next sum.
If you modify the Horowitz-Sahni algorithm in the right way, then it's hardly slower than original Horowitz-Sahni. Recall that Horowitz-Sahni works two lists of subset sums: Sums of subsets in the left half of the original list, and sums of subsets in the right half. Call these two lists of sums L and R. To obtain subsets that sum to some fixed value A, you can sort R, and then look up a number in R that matches each number in L using a binary search. However, the algorithm is asymmetric only to save a constant factor in space and time. It's a good idea for this problem to sort both L and R.
In my code below I also reverse L. Then you can keep two pointers into R, updated for each entry in L: A pointer to the last entry in R that's too low, and a pointer to the first entry in R that's too high. When you advance to the next entry in L, each pointer might either move forward or stay put, but they won't have to move backwards. Thus, the second stage of the Horowitz-Sahni algorithm only takes linear time in the data generated in the first stage, plus linear time in the length of the output. Up to a constant factor, you can't do better than that (once you have committed to this meet-in-the-middle algorithm).
Here is a Python code with example input:
# Input
terms = [29371, 108810, 124019, 267363, 298330, 368607,
438140, 453243, 515250, 575143, 695146, 840979, 868052, 999760]
(A,B) = (500000,600000)
# Subset iterator stolen from Sage
def subsets(X):
yield []; pairs = []
for x in X:
pairs.append((2**len(pairs),x))
for w in xrange(2**(len(pairs)-1), 2**(len(pairs))):
yield [x for m, x in pairs if m & w]
# Modified Horowitz-Sahni with toolow and toohigh indices
L = sorted([(sum(S),S) for S in subsets(terms[:len(terms)/2])])
R = sorted([(sum(S),S) for S in subsets(terms[len(terms)/2:])])
(toolow,toohigh) = (-1,0)
for (Lsum,S) in reversed(L):
while R[toolow+1][0] < A-Lsum and toolow < len(R)-1: toolow += 1
while R[toohigh][0] <= B-Lsum and toohigh < len(R): toohigh += 1
for n in xrange(toolow+1,toohigh):
print '+'.join(map(str,S+R[n][1])),'=',sum(S+R[n][1])
"Moron" (I think he should change his user name) raises the reasonable issue of optimizing the algorithm a little further by skipping one of the sorts. Actually, because each list L and R is a list of sizes of subsets, you can do a combined generate and sort of each one in linear time! (That is, linear in the lengths of the lists.) L is the union of two lists of sums, those that include the first term, term[0], and those that don't. So actually you should just make one of these halves in sorted form, add a constant, and then do a merge of the two sorted lists. If you apply this idea recursively, you save a logarithmic factor in the time to make a sorted L, i.e., a factor of N in the original variable of the problem. This gives a good reason to sort both lists as you generate them. If you only sort one list, you have some binary searches that could reintroduce that factor of N; at best you have to optimize them somehow.
At first glance, a factor of O(N) could still be there for a different reason: If you want not just the subset sum, but the subset that makes the sum, then it looks like O(N) time and space to store each subset in L and in R. However, there is a data-sharing trick that also gets rid of that factor of O(N). The first step of the trick is to store each subset of the left or right half as a linked list of bits (1 if a term is included, 0 if it is not included). Then, when the list L is doubled in size as in the previous paragraph, the two linked lists for a subset and its partner can be shared, except at the head:
0
|
v
1 -> 1 -> 0 -> ...
Actually, this linked list trick is an artifact of the cost model and never truly helpful. Because, in order to have pointers in a RAM architecture with O(1) cost, you have to define data words with O(log(memory)) bits. But if you have data words of this size, you might as well store each word as a single bit vector rather than with this pointer structure. I.e., if you need less than a gigaword of memory, then you can store each subset in a 32-bit word. If you need more than a gigaword, then you have a 64-bit architecture or an emulation of it (or maybe 48 bits), and you can still store each subset in one word. If you patch the RAM cost model to take account of word size, then this factor of N was never really there anyway.
So, interestingly, the time complexity for the original Horowitz-Sahni algorithm isn't O(N*2^(N/2)), it's O(2^(N/2)). Likewise the time complexity for this problem is O(K+2^(N/2)), where K is the length of the output.