I'm queuing messages to a WebSphere MQ queue (NB: A point-to-point queue -- not a topic) using a stored procedure in my Oracle database. Is there a way to publish each message to multiple queues with a single call? What I would like is to find a solution that would incur zero additional latency on my database compared to sending the message to a single queue.
Solutions that involve changing my WebSphere MQ settings are certainly welcome! What I had in mind was somehow creating a "clone" queue that got all the same messages as the original one, but I've been unable to locate anything like this in the documentation.
Thanks,
Jeff
With WMQ v7 you can do this easily and with administration only. You would create a topic object and then an alias over the topic. The Oracle app writes to the alias and does not know that it is actually publishing.
Meanwhile, you make two administrative subscriptions on the topic so that publications are delivered to your two destination queues. The apps consuming them have no idea that the messages were published as opposed to delivered through point-to-point queues.
If you are not familiar with the new WMQ v7 features, take a look at the Infocenter. In particular, the "What's New in V7" section and the sections on Pub/Sub.
You can accomplish this using "Distribution Lists" in WebsphereMQ. These have to be configured on your queue manager.
Take a look at the Wesbphere MQ Application Programming Guide for more info.
Related
I'm an IBM MQ novice, however have used other messaging systems in the past (Solace, RabbitMQ, BizTalk). I apologize if some of my MQ terminology is incorrect when it comes to local/remote/transmission queues etc.
I am integrating with a 3rd Party using MQ. I have no control over the use of MQ when it comes to this 3rd party. They define the set integration pattern.
I have my own local Queue Manager.
The 3rd party supports many 100s of different message types.
Typically each message sent to them will result in a response
Responses on overage will be delivered back to my QM within 0.5s (agreed SLA)
The basic model is as follows;
For all outbound messaging I publish to a single queue
All responses come to a single inbound queue on my QM
I do not believe they respect/use the ReplyToQ or ReplyToQmgr header properties
High level overview of the use case;
The MQ usage will be very active. Perhaps 500-1000 outbound messages per second
For the vast majority of these - there will be a user waiting for a response
The current design approach is to put a message onto the outbound queue and then create a subscription to the inbound queue with a JMS selector using the correlation ID.
Here is my challenge;
I am not sure if having so many concurrently subscriptions all with a unique filter on the single inbound queue will perform well. I would appreciate insights into this. I have a 2 node cluster running in a docker container. I don't have details on the spec yet.
My preference would be have messages arrive into the inbound queue and then be routed to many "function" specific local queues on the QM.
I would still use JMS selectors on the message ID in this model - however I would hope the load would be spread from a single deep queue to many shorter queues
It does not seem that I could route messages natively within MQ without an addon such as MQ Integration Broker or ESB (some other products within the WebSphere suite).
It is on this last point I could use some guidance. Can I route within my QM? If so - what options do I have. Alternatively - perhaps there are much better approaches that I have not considered?
Any guidance would be heartily appreciated!!
We are using WebLogic 10.3.6.0 and IBM MQ 7.5.
Application design is to send messages to a dead letter queue (in WebLogic) on re-delivery. The re-delivery happens as the first delivery has failed due to some network issue or database data source failure.
My Client wants a way to browse the messages in the dead letter queue from the application GUI and pull them for processing when the network issue or data source issue has been resolved.
What is the best way to go about this?
I cam across QueueBrowser coupled with activemq or some other implementation. Is QueueBrowser possible with WebLogic? Please suggest on best ways to achieve this requirement.
Kindly pardon if my question is too naive. I am only a PL/SQL programmer.
Valerie is referring to the SYSTEM DLQ and application should never ever write to it. Application's should have there own DLQ.
i.e. If your application queue is called 'TEST.Q1' then your application DLQ should be called 'TEST.Q1.DLQ'.
There is a whole long list of MQ tools here to view messages and manage your MQ environment.
Is the application actually designed to write to the DLQ? If so, that is a very poor design. The DLQ is for the queue manager and MQ software to place messages which can not be delivered. The application should not be writing to the DLQ.
As for how to view messages on DLQ, that can be done with the MQ Explorer GUI. Or to write a script, use the DLQ handler (runmqdlq) with a rules table for processing messages.
Ref: Official GlassFish 4.0 docs/javaee-tutorial Java EE 7
Firstly, let us start with the destination-type of: topic.
As per GlassFish 4.0 tutorial, section “46.4 Writing High Performance and Scalable JMS Applications”:
This section describes how to use the JMS API to write applications
that can handle high volumes of messages robustly.
In the subsection “46.4.2 Using Shared Durable Subscriptions”:
The SharedDurableSubscriberExample.java client shows how to use shared
durable subscriptions. It shows how shared durable subscriptions
combine the advantages of durable subscriptions (the subscription
remains active when the client is not) with those of shared consumers
(the message load can be divided among multiple clients).
When we run this example as per “46.4.2.1 To Run the ShareDurableSubscriberExample and Producer Clients”, it gives us the same effect/functionality as previous example on destination-type of queue: if we follow “46.2.6.2 To Run the AsynchConsumer and Producer Clients”, points 5 onwards – and modify it slightly using 2 consumer terminal-windows and 1 producer terminal-window.
Yes, section “45.2.2.2 Publish/Subscribe Messaging Style” does mention:
The JMS API relaxes this requirement to some extent by allowing
applications to create durable subscriptions, which receive messages
sent while the consumers are not active. Durable subscriptions provide
the flexibility and reliability of queues but still allow clients to
send messages to many recipients.
.. and anyway section “46.4 Writing High Performance and Scalable ..” examples are queue style – one message per consumer:
Each message added to the topic subscription is received by only one
consumer, similarly to the way in which each message added to a queue
is received by only one consumer.
What is the precise technical answer for: why, in this example, the use of Shared-Durable-Consumer on Topic is supposed to be, and mentioned under, “High Performance and Scalable JMS Application” vs. use of Asynchronous-Consumer on Queue?
I was wonderign about the same issue, so I found out the following link. I understand that John Ament gave you the right reponse, maybe it was just too short to get a full understand.
Basically, when you create a topic you are assuming that only the subscribed consumers will receive its messages. However processing such a message may requires a heavy processing; in such a cases you can create a shared topic using as much threads as you want.
Why not use a queue? The answer is quite simple, if you use a queue only one consumer will be able to handle such a message.
In order to clarify I will give you an example. Let's say a federal court publishes thousand of sentences every day and you have three distinct applications that depends on it.
Application A just copy the sentences to a database.
Application B parse the sentence and try to find out all relation between people around all previously saved sentences.
Application C parse the sentence and try to find out all relation between companies around all previously saved sentences.
You could use a Topic for the sentences, where Application A, B and C would be subscribed. However it easy to see that Application A can process the message very quicly while Application B and C may take some time. An available solution would consist of create a shared subscription for application B and another one to application C, so multiple threads could act on each of them simultaneouly...
...Of course there are other solutions, you could for example use a unshared topic (i.e. a regular one) and post all received messages on a ArrayBlockingQueue that would be handled by a pool of threads some time later; howecer in such a decision the developer would be the one to worry about queue handling.
Hope this can help.
The idea is that you can have multiple readers on a subscription. This allows you to read more messages faster, assuming you have threads available.
JMS Queue :
queued messages are persisted
each message is guaranteed to be delivered once-and-only-once, even no consumer running when the messages are sent.
JMS Shared Subscription :
subscription could have zero to many consumers
if messages sent when there is no subscriber (durable or not), message will never be received.
How would I set up MQ so that every message received is immediately written to file system?
I have the "redbooks", but at least need someone at least point me to a chapter or heading in the book to figure it out.
We are a .NET shop. I have written C# via API to read the queue, and we currently use BizTalk MQ adapter. Our ultimate goal is to write same message to multiple directories in file system to "clone" the feed for our various test environments (DEV, STAGE, TRAINING, etc..). The problem with BizTalk is that when we consume the message, we map it at the same time to a new message, so the message is already changed, and we want the original raw message to be cloned, not the morphed one. Our vendors don't offer multiple copies of the feed, for example, they offer DEV and PROD, but we have 4 systems internally.
I suppose I could do a C# Windows Service to do it, but I would rather use built-in features of MQ if possible.
There is no configuration required. If the message is persistent, WMQ writes it to disk. However, I don't think that's going to help you because they are not written as discrete messages. There's no disk file to copy and replication only works if the replicated QMgr is identical to the primary and is offline during the replication.
There are a number of solutions to this problem but as of WMQ V7, the easiest one is to use the built-in Pub/Sub functionality. This assumes that the messages are arriving over a QMgr-to-QMgr channel and landing on a queue where you then consume them.
In that case, it is possible to delete the queue and create an alias of the same name over a topic. You then create a new queue and define an administrative subscription that delivers messages on the topic into the new queue. Your app consumes from the new queue.
When you need to send a feed to another QMgr or application, define a new subscription and point it at the new destination queue. Since this is Pub/Sub, MQ will replicate the original message as many times as there are subscriptions and the first application and its messages are not affected. If the destination you need to send to isn't accessible over MQ channels (perhaps DEV and QA are not connected, for example), you can deliver the messages to the new queue, use QLoad from SupportPac MO03 to write them to a file and then use another instance of QLoad to load them onto a different QMgr. If you wanted to move them in real time, you could set up the Q program from SupportPac MA01 to move them direct from the new subscription queue on QMgr1 to the destination queue on QMgr2. And you can replicate across as many systems as you need.
The SupportPacs main page is here.
If all you are using is the Redbooks, you might want to have a look at the Infocenters. Be sure to use the Infocenter matching the version of WMQ you are using.
WMQ V7.0 Infocenter
WMQ V7.1 Infocenter
WMQ V7.5 Infocenter
Can anyone recommend a tool for quickly posting test messages onto a JMS queue? The tool should allow the user to enter some data, perhaps an XML payload, and then submit it to a queue? I know I could probably knock something up reasonably quickly to do this but I thought I'd ask first before reinventing the wheel. Cheers.
In ActiveMQ there is a very nice web admin console that allows you to send custom messages to any queue, you can even send several messages at once to stress test your application.
If you need something more generic, SoapUI has a JMS module. I never tried it, but the overall quality of this application suite is very promising.
Have a look at IBM WebSphere Developer Technical Journal: Running a standalone Java application on WebSphere MQ V6.0. Although the article is geared toward WebSphere MQ, the code download is plain-vanilla JMS with JNDI lookups and should run on any compliant JMS provider.
The nice thing about this is that it works for both queues and topics and will either be a message producer or a message consumer based on the run-time options. You can fire one up as a producer and another (or two or three or four) as a consumer to test out a queue or topic. The code is very simple non-gui which makes it an excellent starting point for experimentation. You could for example, easily modify it to set message expiry or bridge between topics and queues.
Two sourceforge Projects might be interesting:
Apache ActiveMQBrowser
QBrowser for GlassFish JMS / WebLogic MQ
They are from the same developer and quite active
You should have a look at HermesJMS. It is very feature rich, some concepts are a bit hard to understand...
I have written a client for Activemq and Hornetq that does just that. It's a commercial but there's a 60-day trial period. You can find it at:
Rockeye JMS
Regards,
Serge