Related
Question says it all. I'm trying to write a Visual Studio addin (2012), and the experimental instance always launches without running anything in the addin. No breakpoints are hit in the main instance, nor does the addin get loaded by the experimental instance.
I should point out: it worked at one point once or twice, then I deleted the project since I thought it was the wrong kind of project, but ended up recreating it with the same name.
No amount of fiddling with "allowing addins to load" or resetting the experimental instance or cleaning the registry manually fixes the problem. I also tried looking for my addin dll, but it wasn't in the list. I'm totally out of ideas and possible search terms. Any suggestions?
I had the same problem as you and have just discovered the fix for me, it relates to the new "file properties" entry in the add-in project that gets supplied.
If you open this file which is in my case called "[App Name] - For Testing.AddIn" you'll see XML markup containing things like the AddIn friendly name, description e.t.c.
For me I found that I'd immediately renamed the output assembly for my project and this no longer matched that found inside this properties file:
<Extensibility xmlns="http://schemas.microsoft.com/AutomationExtensibility">
<HostApplication>
<Name>Microsoft Visual Studio</Name>
<Version>11.0</Version>
</HostApplication>
<Addin>
<FriendlyName>My Addin</FriendlyName>
<Description>My Addin description.</Description>
**<Assembly>E:\Workspaces\Scratch\MyApp\bin\MyApp.VisualStudio.Addin.dll</Assembly>
<FullClassName>MyApp.VisualStudio.Addin.Connect</FullClassName>**
<LoadBehavior>1</LoadBehavior>
<CommandPreload>1</CommandPreload>
<CommandLineSafe>0</CommandLineSafe>
</Addin>
I checked the name of the assembly and class names fixed them up, saved the file and hit debug and it all started working again! Hope this helps...
I had a similar problem... fought with it for quite a while, and eventually, absolutely randomly experimented with adding other configurations to the project (Configuration Manager) and also changing the framework.
One of the two magically helped. (I think it may have been the framework... though it makes no sense).
I am not saying that the same thing will work for you.
The random experiment was not really random: I got hold of a "debuggable" add-in off the web, and compared every single item in the project, solution and all other files, to find what could be different. This is my true suggestion.
If all else fails, you can also try to manually attach the debugger, see if you can make headway this way. [ that did not work for me, but it may provide valuable information, and... not all bugs are created the same. ]
Seems like there are different solutions to this problem but this finally helped me:
Changing <LoadBehavior>1</LoadBehavior> to <LoadBehavior>0</LoadBehavior> in the AddIn-file and put it manually in C:\Users[UserName]\Documents\Visual Studio 2012\Addins
Restarting Visual Studio (I use 2012)
Complete AddIn-file:
<?xml version="1.0" encoding="UTF-16" standalone="no"?>
<Extensibility xmlns="http://schemas.microsoft.com/AutomationExtensibility">
<HostApplication>
<Name>Microsoft Visual Studio</Name>
<Version>11.0</Version>
</HostApplication>
<Addin>
<FriendlyName>[Friendly Assembly Name]</FriendlyName>
<Description>[Description of the Addin]</Description>
<AboutBoxDetails>[About details]</AboutBoxDetails>
<Assembly>[Full path to the binary e.g. C:\Test\debug\test.dll]</Assembly>
<FullClassName>Test.Connect</FullClassName>
<LoadBehavior>0</LoadBehavior>
<CommandPreload>1</CommandPreload>
<CommandLineSafe>0</CommandLineSafe>
</Addin>
</Extensibility>
In my case I moved to a different developer machine where it was previously working on the old machine, but on the new machine I didn´t have any '[Assembly Name] - For Testing.AddIn' since I didn´t bother to check it in. I think the LoadBehavior is the difference between For Testing and the regular AddIn.
I had the same problem. Debugging worked until I closed all instances of Visual Studio. I then opened Visual Studio again and it said that the add-in that I had been debugging had stopped working. When Visual Studio asked whether to remove it, I said yes.
Apparently removing the add-in in this ray renames the "[AppName] - For Testing.AddIn" file to have an underscore appended.
To fix the problem, go into the add-in solution and look at the properties on the "[AppName] - For Testing.AddIn" file. Go to the folder where the file is located. Rename this file in the file system to match the name of the file in Visual Studio.
In my case, Resharper was the reason. Everything gets back to normal after disabling Resharper.
I installed a retail version of Windows 8 Pro. I downloaded and installed Visual Studio Express 2012. I asked for and received a developers certificate. Then I tried to create a hello world app.
From there I get a "Unable to Activate Windows Store App" message box when I try to debug the app. Most commentary on the web says delete build directories. This didn't work for me
Does anyone have a solution for how to fix this and debug my app?
This happened to me once too, but the deleting build directories advice fixed it. Specifically, you just need to delete the bin\Debug and bld\Debug folders in your projects. Their contents will be regenerated by Visual Studio when you rebuild. I assume that this is only one project since it's a Hello World app; otherwise I would ask if you deleted build directories from all projects in your solution.
You can also try running "Clean Solution" from the BUILD menu in Visual Studio.
I'm sorry...it's horrible if this is happening on a clean install as you describe.
I ran into the same issue, and tried rebuilding, cleaning, deleting temp files, rebooting the computer, etc... and nothing helped.
Then finally I made a release build then went back to debug. And now it works.
I have no idea what happened, nor if that really helped, but it's worth a try.
For me a RESTART of pc solved this error message.
For me the problem was that I created the app on a TrueCrypt mounted virtual drive and when I moved the project files to a normal drive then everything worked just fine. Weird.
I was getting the exact same error. In my case the culprit was a NuGet package. It had added an app.config file to the project and it was confusing VS. I removed the app.config file and it solved my issue.
I got the solution at Iris Classon's site.
This can be solved by Uninstalling the app from the start screen then again building the app from Visual Studio.
I had a similar problem, and the cause was creating the project on a USB thumb drive. Creating a project on a normal hard drive volume works.
this can happen when the application signing key (.pfx file) is missing.
Try the following:
Open the Package.appxmanifest file in Visual Studio
Go to the register "Packaging"
Select [Choose Certificate…]
Select the test certificate using [Configure Certificate…] [From File…], or create a new one using [Configure Certificate…] [Test Certificate…]
When using a test certificate, ensure that it is in the .gitignore file. There should be an entry like !**\*_TemporaryKey.pfx to include the key in Git.
Note: The certificate for release build should only be available to the build server and not included in Git.
Rebuild the project
This has happened to me in the past and I have always found that deleting the build directories resolves it.
However this time this is not working for me.
I have tried
- Rebooting
- Deleting build directories
- Running Build | Clean Solution in VS
- Renewing Developer Account
The only thing that will work for me is changing my Package name under the Package.appxmanifest
However I am not overly happy with this as a solution. I will keep investigating.
The issue might be caused because NuGet will try to add an app.config with binding redirects to Windows Store apps if it thinks it is needed. However, Windows Store apps don’t need app.config, and will actually fail to start with a very confusing error message if it is present.
And the solution in this case would be to Remove the App.config
This error generally comes when you try to deploy in debug mode.
I would suggest, deploy the app first in release mode and then try in debug mode.
This worked for me.
Making a new certificate works for me. For this, go to Package.manifest->Packaging, and follow the Choose certificate.... Click on Configure certificate and select Create test certificate. Give it a name and press OK.
Increasing the revision number of the package worked for me
Tried so many of the above fixes. Nothing worked (deleting bin, obj dirs, editing the manifest, editing the registry, changing package name, etc, etc.) My Avast antivirus software was running and so I uninstalled it completely. That was it. App now runs fine.
This sort of problems are common with Windows 8 Visual Studio. Such errors encounters when your developer license of Visual Studio has expired so you may want to renew or get a new developer license here's how you get that. How to get a developer license in Windows 8
And similar problem may also encounter with E_Fail issues here's how to solve Unable to activate Windows Store app E_Fail Issue
For me, the fix was a combination of two of these answers -
Renew the developer license (How to get a developer license in Windows 8)
And deleting the build directories (though I deleted more then the screenshot depicted) Delete the Build directories
NuGet will try to add an app.config with binding redirects to Windows Store apps if it thinks it is needed. However, Windows Store apps don’t need app.config, and will actually fail to start with a very confusing error message if it is present.
Solution:
Remove the App.config
and build again
For those who get a similar error but who are searching for a solution while debugging an IOT background app on a local machine specifically - you can find it here.
Using the search term "unable to activate windows store app the activation request failed with error" brought me here.
Because of Two things i resolved this issue.
Basically, we just need to delete the bin\Debug and bld\Debug folders in our projects. Those contents will be regenerated by Visual Studio when you rebuild project.
Just Restart the Visual Studio. And Clean Build and Rebuild the solution and RUN it.
Hope this helps.,
Playing with this issue for 3 days, tried every suggestions, nothing works. Until now!!!
The solution was this for me:
renew developer licence
build and deploy solution in Release mode (after this step it still not worked, but VS installed some packages in rpi)
start VS remote debugger with default account (http://:8080/#Debug%20settings)
configure remote device with Universal authentication mode (VS2017 -> Project settings -> debug -> target device: remote machine, authentication mode: Universal (unencrypted protocol))
...and now I can sleep.
Hope it helps somebody.
This gift was courtesy of Microsoft's automatic updates for VS2015 which was one of the 2 culprits:
KB3022398
KB3165756
It also broke SourceTree and other apps that draw the GUI - making an outline of the app but not drawing the contents.
For me changing the Package Name in Package.appxmanifest fixed the problem
In my case, the C# UWP app had a native library which failed in the application startup code, and called exit(1). The symptoms were identical to those in the question, though. Visual Studio would throw a message:
Unable to activate Windows Store app '88888888-6666-5555-4444-111111111111_abcdefgh!App'. The Acme.exe process started, but the activation request failed with error 'Operation not supported. Unknown error: 0x80040905'.
In addition, there was a message in the UWP app Windows log under Microsoft\Windows\Apps\Microsoft-Windows-TWinUI/Operational: event ID 5961, message:
Activation for 88888888-6666-5555-4444-111111111111_abcdefgh!App failed. Error code: Unknown HResult Error code: 0x80040905. Activation phase: COM App activation
Internally, the C# part would try to construct a native class instance from the App constructor, the native class constructor would encounter an unrecoverable error and bail. From the UWP subsystem standpoint, and from the debugger standpoint, though, this looked as something distinct from the mere programmatic exit. I'll leave this answer here, 'cause I've spent some time chasing various UWP failure scenarios instead of running under a native debugger.
I've replaced the exit() call with throw ref new Exception(E_INVALIDARG). At least this way the error manifests in the managed debugger, and the message is descriptive.
I've been having this problem a lot with a UWP Windows 10 app on Visual Studio 2019...for me the reliable workaround is to bump the Build number in the Package.appxmanifest file (Packaging tab). It's a huge pain...really hope Microsoft will sort this out soon
Any existing error in the code can also cause this issue. Make sure your previous version of the code is working fine. Compare the difference and make sure all looks good.
I was getting this error and nothing else worked so I had to dissect my program. Turns out I referenced a StaticResource in my App.xaml that didn't exist.
Seems like a silly error but you'd also think Visual Studio would pick up on something like that and throw a different error so if nothing else works, double check your application resources.
As suggested by #Iman in a comment, in the UWP project settings, enable "Compile with .NET Native tool chain".
(After trying just about every answer in this question)
I hope someone else has encountered this because its driving me batty.
I recently got a new laptop so I've been setting up my Visual Studio solutions (VS2010 with .NET 4.0) that I saved off my old machine. One of them is a simple console app that I use to simulate some things for testing. It references 2 assemblies that I have in another solution that I am working on now. This used to all work fine as expected but ever since moving to the new machine I get the dreaded "The type or namespace name 'YourAssembly' could not be found (are you missing a using directive or an assembly reference?" error message. The references are clearly shown in the Visual Studio but when the project builds it does not copy them to the bin directory which explains the message. Initially I was just referencing the dlls the way I would any 3rd party dll but I even tried removing that and including the project files in my solution and referencing them that way and still it fails. I've verified that the dlls have their 'Copy Local' property set to true and they do. Its really bizarre because the project references several other dlls that are just 3rd party assemblies (for example NLog, GData, etc) and those all copy over fine but not these two for some strange reason.
Here's one more piece of oddness. If I add some code to the console app that references my assemblies it says it can't find it. If I then re-add the assemblies to the references, the error disappears until I try to build it again and then it returns. Is this a VS bug or what? I've never seen this kind of odd behavior before.
thanks
One case that I have seen that caused the problems you are talking about:
Including references to dlls that are built in-house, linked to a specific version of the dll. Get a new copy of the dll (with a different version number) and the build breaks.
The solution in this case is to set the DLL reference property Specific Version to false. The version of the dll is ignored (in my case, it is safe to ignore it), and the build works properly.
I've also had weird errors like this where the NTFS permissions were set on the old file with an old login, but the new machine didn't like the old permissions.
Also, sometimes the old .sln or .csproj file refers to an odd file path that you can't seem to edit from within VStudio. Try opening those files with notepad and make sure the paths aren't broken. You can usually edit and save with fixed paths and things will work again.
Hans had the answer above but I was unable to find that post through searches so hopefully if you stumble upon this question I can save you several hours of frustration.
For some bizarre reason the 'Target Framework' was defaulting to ".NET Framework 4 - Client Profile" in the project properties. I double checked and it seems to do that whenever I create a new console app. It must be version related thing in VS because I hadn't encountered this issue previously in 2010.
To fix:
Right click on your project, choose properties
Under the main Application tab, set the Target Framework to be your framework of choice but NOT one of the 'Client Profile' options
Save and build as normal
I'm unable to debug a WinForms C# application using the released version of Visual Studio 2010 Prof.
I get the following error message after the second debugging run.
Error 9 Unable to copy file "obj\x86\Debug\Arrowgrass Reports.exe" to "bin\Debug\Arrowgrass Reports.exe". The process cannot access the file 'bin\Debug\Arrowgrass Reports.exe' because it is being used by another process.
I've tried a pre-build script to attempt to delete this file, but it's locked by Visual Studio.
There are a few references to this on the net so it is a know problem. Does anyone have a hotfix or effective work-around?
I have found this issue very easy to reproduce, and the fix for me is a variation on Richard Fors' answer. If I have a UserControl open in the designer, run the debugger, and then edit the UserControl, the subsequent rebuild will fail. If I close the UserControl before running the debugger I never get this error, so I just make sure to close the designer window before hitting F5.
As of October 2012, I still have that issue so the VS 2010 SP1 didn't solve the problem. What I did, and worked consistently, was disabling the hosting process in the projects.
To disable the hosting process:
. Open a project in Visual Studio.
. On the Project menu, click Properties.
. Click the Debug tab.
. Clear the Enable the Visual Studio hosting process check box.
Source:
http://msdn.microsoft.com/en-us/library/ms185330(v=vs.100).aspx
You can try to kill the vshost.exe process:
taskkill /F /IM "Arrowgrass Reports.vshosts.exe"
You might also be lucky and simply be able to move the file in question. Moving the file can be done by adding the following lines of code to the pre-build event of your project:
if exist "$(TargetPath).locked" del "$(TargetPath).locked"
if exist "$(TargetPath)" if not exist "$(TargetPath).locked" move "$(TargetPath)" "$(TargetPath).locked"
Disabling windows search did not fix for me. However disabling Antivirus did (our Antivirus is Symantec Endpoint Protection 11)
As such, I was able to fix this for myself by changing the Debug settings in the project to point the working folder to a path on the C: drive, and then excepting that path from the antivirus auto-protect scan settings.
I hope this helps someone.
I posted this answer in a similar question but figured I'd also say it here:
Alright... this might sound pretty crazy.
I've had this problem in VS2010 for the last couple of years. The workaround mentioned here works for me, but a lot of times I forgot to close all my forms/usercontrols first.
I've discovered that merely going to view the open files via:
Computer Management (compmgmt.msc)->Shared Folders->Open Files
will "Free up" whichever file is being locked. Very strange, but it works for me!
In my case, I did Project Properties-->Security Tab-->Uncheck Click-Once security settings (If it is checked). It worked for me. In my project, it was showing this error for a C++ dll being used in my C# project.
The condition described can also be caused by the offending DLL or EXE referencing itself; in which case the Process Explorer test described previously never returns a match (e.g. it's not running). This unexpected situation seems to be caused during some sequence of operations in VS2010 (and likely all previous versions) which insidiously adds the reference behind the scenes. The specific cause of this hasn't been tracked down (or resolved that I know of). To check for, and resolve this error simply make sure the offending DLL or EXE is not listed as a reference to itself.
Got the error ("The process cannot access the file … because it is being used by another process") when I modified the (Visual Studio 2010 C# Express with SP1) solution from two large (10 source files, ~500 lines per file) projects with one referencing the other, to lots (6) of smaller projects with lots of projects referencing other projects.
The references were to the dll- and exe files (the Debug versions of them), NOT to the projects even though the projects were in the same solution.
I then learned that references should be to projects, not files, for F12 to work properly. So I modified the references. That made F12 work (jump to the source file instead of some auto-generated interface description), and at the same time the "cannot access file" error during build disappeared.
I only got the "cannot access file" error when doing Release builds. The references were to the Debug versions of exe/dll's. I suspect that this mixing is what triggers the bug in VS.
I encountered this issue when developing windows services. I found out that it happens when the service is running. Thus, you only need to stop the service (from the services.msc console) and you're good to go !
Hope this helps.
Tidjani.
Check Task Manager for the specified process and End the process explicitly. This solution worked for me.
I cant' write to a comment since not at 50 points but for me I excluded my project folder in ESET Enpoint Security ver 5. Seems like it blocked/hogged some files. My Error did not state which exe or file was in use so it took a long time to finally get to what JoeC said about Antivirus and tried it. Seems to be working now (Visual Studio 2010 SP1)
Closing recently changed User Controls solved the problem in my scenario. Hope this will help somebody out there.
Looks like this issue has (finally!) been fixed in the VS2010 SP1
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=75568aa6-8107-475d-948a-ef22627e57a5&displaylang=en
Please try uninstalling Windows Live SYNC. Does it still happen?
I think I just found the culprit and the solution.
Go to services and stop & disable the "windows search" service.
That solved the problem for me now.
For me the solution was to change the startup project to a dll (problem only occurs in debug mode when having an application as the startup project). If your solution contains several projects (and it will, and it will contain a .dll, else you would not get the problem), switch to that .dll, no .vshost.exe, no problem.
Also, killing .vshost.exe did not work for me, since immediately after starting again, it had locked the .dll.
Also, make sure to have your references clean, especially in more complex projects, and also prefer project references to assembly references, and so on. I suppose bad references (circular and similar) are bound to cause problems, at least so I have read.
A short article by me on this problem (and my solution)
How to "clean up" your references in a solution
Adding the following to the Pre-build event of the shared dll worked for me:
if exist "$(TargetPath).locked*" del "$(TargetPath).locked*"
set exitprebuildfor$(ProjectName)=
for /l %%a in (1,1,10) do (
if defined exitprebuildfor$(ProjectName) goto :ok
if not exist "$(TargetPath).locked%%a" if exist "$(TargetPath)" move "$(TargetPath)" "$(TargetPath).locked%%a" & set exitprebuildfor$(ProjectName)=1)
:ok
set exitprebuildfor$(ProjectName)=
It's based on the solution given here but instead of just renaming the dll to .locked it keeps trying to rename it to .locked1, locked2. Using 10 I usually run into the problem once a day, but ant value can be used.
Simply make a copy of the whole project and run project from the new copy.... it will work fine.
But you will have to end process of the debug somehow in-order to delete the older project.
Stop IIS service and try building it again or if you can afford to restart your pc, give it a try. Worked for me both ways.
Cheers
My problem was that Outlook 2010 (outlook.exe) was using the same port as my ASP.NET MVC project with IIS express.
Solution: close outlook.exe, run your solution and open outlook again (so that it uses another port).
Hopefully this helps somebody, because I received the same error message as described in this topic.
Try deleting .exe file in debug or release folder (whatever you working on)
Windows will prompt that the process X has opened this and you can't delete it
after that go to task manager and in details tab end task X process
Delete obj file.And stop your service and Restart again.Then you may solve the problem
The best solution for me was to move my project files out of My Documents - which is on a server managed by the IT department - and locate them locally on my C drive. Also working: unchecking the "Enable the Visual Studio hosting process" checkbox, as stated by other people.
If you are working on a C# project which is using reference of C DLL, then you can eliminate the error by checking the Allow unsafe code check box. I know I have not used pointers in my C# project but I was using some bitwise operator in C#. May be these C-like features morphed it as 'Unsafe' code.
What worked for me was removing "read only" status on the bin folder. Once I did that, it has worked ever since.
I've had this error when the project is on a remote share (like, if your $env:homepath is helpfully redirected by your IT department to a network share). Make sure your project is resident on a local drive.
My problem started after creating a custom control and drag and drop it to the toolbox palette for use it in design forms. First appeared a warning saying that there was a redundance between the custom control source file (.cs) and the projects executable (.exe). On executing/debugging appeared the error: unable to access the (.exe) because it's being used (and it was true).
A literally removed the whole source code regarding the custom control and last problem never stopped, until I checked out the references and it was referencing itself in order to be "able to" get the former custom control. I removed the reference and done!!
So: just check the references and remove the self-reference to the project.
Delete your Bin folder and run the application.
This worked for me. :)
Simply turn off Visual Studio hosting in debug, run the project and again re on it and run project.
Open a project in Visual Studio.
. On the Project menu, click Properties.
. Click the Debug tab.
. Clear the Enable the Visual Studio hosting process check box
For Windows Project
The Visual Studio hosting process can hold the executable file pointer. To stop the host instance, open the Project properties and then go to Debug tab. Now uncheck the Enable the Visual Studio hosting Process option and then check the checkbox again to debug.
For web project
The IIS can hold the file pointer. Restarting the IIS can solve the issue.
I just added xUnit to our test project (for the Asserts, we're still using MSTest as the framework) and immediately the test runs refused to execute any of the tests. This is the error message:
Failed to queue test run '{ .... }'
Test run deployment issue: The
location of the file or directory
'...xUnit.dll' is not trusted.
It took me a few tries to find the answer in Google, so I'm putting it here in case anyone else runs into the same problem. A detailed description can be found at this blog posting.
Basically, the fix invovles right-clicking on the dll file (xunit.dll for example) in Windows Explorer, going to Properties, and clicking "Unblock" at the bottom of the tab next to the 'Security' text. It seems that Vista / Windows 2008 will automatically mark assemblies that come from other machines or the internet as unsafe.
As a couple commenters have mentioned, you may also need to restart Visual Studio for this to take effect.
In my team we had the same problem.
Your solution didn't work, but this post by Charles Sterling did help.
We used the following line:
caspol -machine -addgroup 1 -url file://\\server/share/* FullTrust -name DevShare
After having this issue and burning hours trying to get "Unblock" to stick longer than a few minutes and/or figuring out caspol to no avail, I finally found a little tidbit via Google that the assemblies will be blocked again the next time you build or rebuild the project, since they're re-copied from their original source location. (I guess I never noticed that this happened before with references assemblies, but anyway...)
My fix for this was the following:
Copy all the needed DLLs to another
spot for safe-keeping
Remove the
references in Visual Studio
Physically delete the DLLs in the
bin folder
Unblock the DLLs
individually in the spot where they
were copied off
Add the references
back in Visual Studio from the
holding spot
Every subsequent build or rebuild worked fine afterward.
Running on an XP machine (even with .NET 3.5 SP1 installed) I was not able to get any of the other solutions listed here to work.
However working from the same post by Charles Sterling that Davy Landman references, I finally succeeded with this variation:
Run the .NET 2.0 Configuration tool (Settings... Control Panel... Administrative Tools... .NET Framework 2.0 Configuration)
Click down to "My Computer ... Runtime Security Policy ... Machine ... Code Groups ... All_Code"
Create a new code group with membership condition of "Zone"="Local Intranet" and assign the permission set "FullTrust"
Restart Visual Studio
After these steps I am able to run tests, including after restarts and rebuilds.
EDIT: as described in this answer, you may need to install the .NET SDK (which is different from the .NET framework) in order to have the .NET 2.0 Configuration tool on your system.
I had the same problem with moq. But would not 'unblock'. Every time I unblocked it, it was still blocked!?!?
I had to unblock the original zip file I downloaded. Then copy the DLL from the zip file again. It work after that.
It may seem really obvious now, but when I was clicking unblock the file was set as read-only.
Only after un-checking that attribute, applying, then selecting unblock did I actually get this working.
Give that a go.
:)
PS: I also deleted all the old dll's in my bin folder, just to make sure Visual Studio wasn't picking up the old one.
I had the same problem with downloaded DLLs blocked by Vista.
You need Administrator rights to get the "Unblock" button on the file's Properties.
I simply replaced the DLLs with the latest version from source control (TFS) where I had committed them before.
Go to file
Right click and select Properties
On the first Register click on Allow
I also tried opening the file in notepad++ and renaming it.
Slightly different approach, but it worked for me. The local file system then think it comes from the same machine.
It's not just the moq.dll that needs to be unblocked. The latest zip file includes an moq.xml and moq.pdb file - referencing the dll copies these other two files to the bin folders as well. If all three have not been unblocked the tests won't run, I found.