Related
I am confused about a bash script.
I have the following code:
function grep_search() {
magic_way_to_define_magic_variable_$1=`ls | tail -1`
echo $magic_variable_$1
}
I want to be able to create a variable name containing the first argument of the command and bearing the value of e.g. the last line of ls.
So to illustrate what I want:
$ ls | tail -1
stack-overflow.txt
$ grep_search() open_box
stack-overflow.txt
So, how should I define/declare $magic_way_to_define_magic_variable_$1 and how should I call it within the script?
I have tried eval, ${...}, \$${...}, but I am still confused.
I've been looking for better way of doing it recently. Associative array sounded like overkill for me. Look what I found:
suffix=bzz
declare prefix_$suffix=mystr
...and then...
varname=prefix_$suffix
echo ${!varname}
From the docs:
The ‘$’ character introduces parameter expansion, command substitution, or arithmetic expansion. ...
The basic form of parameter expansion is ${parameter}. The value of parameter is substituted. ...
If the first character of parameter is an exclamation point (!), and parameter is not a nameref, it introduces a level of indirection. Bash uses the value formed by expanding the rest of parameter as the new parameter; this is then expanded and that value is used in the rest of the expansion, rather than the expansion of the original parameter. This is known as indirect expansion. The value is subject to tilde expansion, parameter expansion, command substitution, and arithmetic expansion. ...
Use an associative array, with command names as keys.
# Requires bash 4, though
declare -A magic_variable=()
function grep_search() {
magic_variable[$1]=$( ls | tail -1 )
echo ${magic_variable[$1]}
}
If you can't use associative arrays (e.g., you must support bash 3), you can use declare to create dynamic variable names:
declare "magic_variable_$1=$(ls | tail -1)"
and use indirect parameter expansion to access the value.
var="magic_variable_$1"
echo "${!var}"
See BashFAQ: Indirection - Evaluating indirect/reference variables.
Beyond associative arrays, there are several ways of achieving dynamic variables in Bash. Note that all these techniques present risks, which are discussed at the end of this answer.
In the following examples I will assume that i=37 and that you want to alias the variable named var_37 whose initial value is lolilol.
Method 1. Using a “pointer” variable
You can simply store the name of the variable in an indirection variable, not unlike a C pointer. Bash then has a syntax for reading the aliased variable: ${!name} expands to the value of the variable whose name is the value of the variable name. You can think of it as a two-stage expansion: ${!name} expands to $var_37, which expands to lolilol.
name="var_$i"
echo "$name" # outputs “var_37”
echo "${!name}" # outputs “lolilol”
echo "${!name%lol}" # outputs “loli”
# etc.
Unfortunately, there is no counterpart syntax for modifying the aliased variable. Instead, you can achieve assignment with one of the following tricks.
1a. Assigning with eval
eval is evil, but is also the simplest and most portable way of achieving our goal. You have to carefully escape the right-hand side of the assignment, as it will be evaluated twice. An easy and systematic way of doing this is to evaluate the right-hand side beforehand (or to use printf %q).
And you should check manually that the left-hand side is a valid variable name, or a name with index (what if it was evil_code # ?). By contrast, all other methods below enforce it automatically.
# check that name is a valid variable name:
# note: this code does not support variable_name[index]
shopt -s globasciiranges
[[ "$name" == [a-zA-Z_]*([a-zA-Z_0-9]) ]] || exit
value='babibab'
eval "$name"='$value' # carefully escape the right-hand side!
echo "$var_37" # outputs “babibab”
Downsides:
does not check the validity of the variable name.
eval is evil.
eval is evil.
eval is evil.
1b. Assigning with read
The read builtin lets you assign values to a variable of which you give the name, a fact which can be exploited in conjunction with here-strings:
IFS= read -r -d '' "$name" <<< 'babibab'
echo "$var_37" # outputs “babibab\n”
The IFS part and the option -r make sure that the value is assigned as-is, while the option -d '' allows to assign multi-line values. Because of this last option, the command returns with an non-zero exit code.
Note that, since we are using a here-string, a newline character is appended to the value.
Downsides:
somewhat obscure;
returns with a non-zero exit code;
appends a newline to the value.
1c. Assigning with printf
Since Bash 3.1 (released 2005), the printf builtin can also assign its result to a variable whose name is given. By contrast with the previous solutions, it just works, no extra effort is needed to escape things, to prevent splitting and so on.
printf -v "$name" '%s' 'babibab'
echo "$var_37" # outputs “babibab”
Downsides:
Less portable (but, well).
Method 2. Using a “reference” variable
Since Bash 4.3 (released 2014), the declare builtin has an option -n for creating a variable which is a “name reference” to another variable, much like C++ references. Just as in Method 1, the reference stores the name of the aliased variable, but each time the reference is accessed (either for reading or assigning), Bash automatically resolves the indirection.
In addition, Bash has a special and very confusing syntax for getting the value of the reference itself, judge by yourself: ${!ref}.
declare -n ref="var_$i"
echo "${!ref}" # outputs “var_37”
echo "$ref" # outputs “lolilol”
ref='babibab'
echo "$var_37" # outputs “babibab”
This does not avoid the pitfalls explained below, but at least it makes the syntax straightforward.
Downsides:
Not portable.
Risks
All these aliasing techniques present several risks. The first one is executing arbitrary code each time you resolve the indirection (either for reading or for assigning). Indeed, instead of a scalar variable name, like var_37, you may as well alias an array subscript, like arr[42]. But Bash evaluates the contents of the square brackets each time it is needed, so aliasing arr[$(do_evil)] will have unexpected effects… As a consequence, only use these techniques when you control the provenance of the alias.
function guillemots {
declare -n var="$1"
var="«${var}»"
}
arr=( aaa bbb ccc )
guillemots 'arr[1]' # modifies the second cell of the array, as expected
guillemots 'arr[$(date>>date.out)1]' # writes twice into date.out
# (once when expanding var, once when assigning to it)
The second risk is creating a cyclic alias. As Bash variables are identified by their name and not by their scope, you may inadvertently create an alias to itself (while thinking it would alias a variable from an enclosing scope). This may happen in particular when using common variable names (like var). As a consequence, only use these techniques when you control the name of the aliased variable.
function guillemots {
# var is intended to be local to the function,
# aliasing a variable which comes from outside
declare -n var="$1"
var="«${var}»"
}
var='lolilol'
guillemots var # Bash warnings: “var: circular name reference”
echo "$var" # outputs anything!
Source:
BashFaq/006: How can I use variable variables (indirect variables, pointers, references) or associative arrays?
BashFAQ/048: eval command and security issues
Example below returns value of $name_of_var
var=name_of_var
echo $(eval echo "\$$var")
Use declare
There is no need on using prefixes like on other answers, neither arrays. Use just declare, double quotes, and parameter expansion.
I often use the following trick to parse argument lists contanining one to n arguments formatted as key=value otherkey=othervalue etc=etc, Like:
# brace expansion just to exemplify
for variable in {one=foo,two=bar,ninja=tip}
do
declare "${variable%=*}=${variable#*=}"
done
echo $one $two $ninja
# foo bar tip
But expanding the argv list like
for v in "$#"; do declare "${v%=*}=${v#*=}"; done
Extra tips
# parse argv's leading key=value parameters
for v in "$#"; do
case "$v" in ?*=?*) declare "${v%=*}=${v#*=}";; *) break;; esac
done
# consume argv's leading key=value parameters
while test $# -gt 0; do
case "$1" in ?*=?*) declare "${1%=*}=${1#*=}";; *) break;; esac
shift
done
Combining two highly rated answers here into a complete example that is hopefully useful and self-explanatory:
#!/bin/bash
intro="You know what,"
pet1="cat"
pet2="chicken"
pet3="cow"
pet4="dog"
pet5="pig"
# Setting and reading dynamic variables
for i in {1..5}; do
pet="pet$i"
declare "sentence$i=$intro I have a pet ${!pet} at home"
done
# Just reading dynamic variables
for i in {1..5}; do
sentence="sentence$i"
echo "${!sentence}"
done
echo
echo "Again, but reading regular variables:"
echo $sentence1
echo $sentence2
echo $sentence3
echo $sentence4
echo $sentence5
Output:
You know what, I have a pet cat at home
You know what, I have a pet chicken at home
You know what, I have a pet cow at home
You know what, I have a pet dog at home
You know what, I have a pet pig at home
Again, but reading regular variables:
You know what, I have a pet cat at home
You know what, I have a pet chicken at home
You know what, I have a pet cow at home
You know what, I have a pet dog at home
You know what, I have a pet pig at home
This will work too
my_country_code="green"
x="country"
eval z='$'my_"$x"_code
echo $z ## o/p: green
In your case
eval final_val='$'magic_way_to_define_magic_variable_"$1"
echo $final_val
This should work:
function grep_search() {
declare magic_variable_$1="$(ls | tail -1)"
echo "$(tmpvar=magic_variable_$1 && echo ${!tmpvar})"
}
grep_search var # calling grep_search with argument "var"
An extra method that doesn't rely on which shell/bash version you have is by using envsubst. For example:
newvar=$(echo '$magic_variable_'"${dynamic_part}" | envsubst)
For zsh (newers mac os versions), you should use
real_var="holaaaa"
aux_var="real_var"
echo ${(P)aux_var}
holaaaa
Instead of "!"
As per BashFAQ/006, you can use read with here string syntax for assigning indirect variables:
function grep_search() {
read "$1" <<<$(ls | tail -1);
}
Usage:
$ grep_search open_box
$ echo $open_box
stack-overflow.txt
Even though it's an old question, I still had some hard time with fetching dynamic variables names, while avoiding the eval (evil) command.
Solved it with declare -n which creates a reference to a dynamic value, this is especially useful in CI/CD processes, where the required secret names of the CI/CD service are not known until runtime. Here's how:
# Bash v4.3+
# -----------------------------------------------------------
# Secerts in CI/CD service, injected as environment variables
# AWS_ACCESS_KEY_ID_DEV, AWS_SECRET_ACCESS_KEY_DEV
# AWS_ACCESS_KEY_ID_STG, AWS_SECRET_ACCESS_KEY_STG
# -----------------------------------------------------------
# Environment variables injected by CI/CD service
# BRANCH_NAME="DEV"
# -----------------------------------------------------------
declare -n _AWS_ACCESS_KEY_ID_REF=AWS_ACCESS_KEY_ID_${BRANCH_NAME}
declare -n _AWS_SECRET_ACCESS_KEY_REF=AWS_SECRET_ACCESS_KEY_${BRANCH_NAME}
export AWS_ACCESS_KEY_ID=${_AWS_ACCESS_KEY_ID_REF}
export AWS_SECRET_ACCESS_KEY=${_AWS_SECRET_ACCESS_KEY_REF}
echo $AWS_ACCESS_KEY_ID $AWS_SECRET_ACCESS_KEY
aws s3 ls
Wow, most of the syntax is horrible! Here is one solution with some simpler syntax if you need to indirectly reference arrays:
#!/bin/bash
foo_1=(fff ddd) ;
foo_2=(ggg ccc) ;
for i in 1 2 ;
do
eval mine=( \${foo_$i[#]} ) ;
echo ${mine[#]}" " ;
done ;
For simpler use cases I recommend the syntax described in the Advanced Bash-Scripting Guide.
KISS approach:
a=1
c="bam"
let "$c$a"=4
echo $bam1
results in 4
I want to be able to create a variable name containing the first argument of the command
script.sh file:
#!/usr/bin/env bash
function grep_search() {
eval $1=$(ls | tail -1)
}
Test:
$ source script.sh
$ grep_search open_box
$ echo $open_box
script.sh
As per help eval:
Execute arguments as a shell command.
You may also use Bash ${!var} indirect expansion, as already mentioned, however it doesn't support retrieving of array indices.
For further read or examples, check BashFAQ/006 about Indirection.
We are not aware of any trick that can duplicate that functionality in POSIX or Bourne shells without eval, which can be difficult to do securely. So, consider this a use at your own risk hack.
However, you should re-consider using indirection as per the following notes.
Normally, in bash scripting, you won't need indirect references at all. Generally, people look at this for a solution when they don't understand or know about Bash Arrays or haven't fully considered other Bash features such as functions.
Putting variable names or any other bash syntax inside parameters is frequently done incorrectly and in inappropriate situations to solve problems that have better solutions. It violates the separation between code and data, and as such puts you on a slippery slope toward bugs and security issues. Indirection can make your code less transparent and harder to follow.
For indexed arrays, you can reference them like so:
foo=(a b c)
bar=(d e f)
for arr_var in 'foo' 'bar'; do
declare -a 'arr=("${'"$arr_var"'[#]}")'
# do something with $arr
echo "\$$arr_var contains:"
for char in "${arr[#]}"; do
echo "$char"
done
done
Associative arrays can be referenced similarly but need the -A switch on declare instead of -a.
POSIX compliant answer
For this solution you'll need to have r/w permissions to the /tmp folder.
We create a temporary file holding our variables and leverage the -a flag of the set built-in:
$ man set
...
-a Each variable or function that is created or modified is given the export attribute and marked for export to the environment of subsequent commands.
Therefore, if we create a file holding our dynamic variables, we can use set to bring them to life inside our script.
The implementation
#!/bin/sh
# Give the temp file a unique name so you don't mess with any other files in there
ENV_FILE="/tmp/$(date +%s)"
MY_KEY=foo
MY_VALUE=bar
echo "$MY_KEY=$MY_VALUE" >> "$ENV_FILE"
# Now that our env file is created and populated, we can use "set"
set -a; . "$ENV_FILE"; set +a
rm "$ENV_FILE"
echo "$foo"
# Output is "bar" (without quotes)
Explaining the steps above:
# Enables the -a behavior
set -a
# Sources the env file
. "$ENV_FILE"
# Disables the -a behavior
set +a
While I think declare -n is still the best way to do it there is another way nobody mentioned it, very useful in CI/CD
function dynamic(){
export a_$1="bla"
}
dynamic 2
echo $a_2
This function will not support spaces so dynamic "2 3" will return an error.
for varname=$prefix_suffix format, just use:
varname=${prefix}_suffix
I am confused about a bash script.
I have the following code:
function grep_search() {
magic_way_to_define_magic_variable_$1=`ls | tail -1`
echo $magic_variable_$1
}
I want to be able to create a variable name containing the first argument of the command and bearing the value of e.g. the last line of ls.
So to illustrate what I want:
$ ls | tail -1
stack-overflow.txt
$ grep_search() open_box
stack-overflow.txt
So, how should I define/declare $magic_way_to_define_magic_variable_$1 and how should I call it within the script?
I have tried eval, ${...}, \$${...}, but I am still confused.
I've been looking for better way of doing it recently. Associative array sounded like overkill for me. Look what I found:
suffix=bzz
declare prefix_$suffix=mystr
...and then...
varname=prefix_$suffix
echo ${!varname}
From the docs:
The ‘$’ character introduces parameter expansion, command substitution, or arithmetic expansion. ...
The basic form of parameter expansion is ${parameter}. The value of parameter is substituted. ...
If the first character of parameter is an exclamation point (!), and parameter is not a nameref, it introduces a level of indirection. Bash uses the value formed by expanding the rest of parameter as the new parameter; this is then expanded and that value is used in the rest of the expansion, rather than the expansion of the original parameter. This is known as indirect expansion. The value is subject to tilde expansion, parameter expansion, command substitution, and arithmetic expansion. ...
Use an associative array, with command names as keys.
# Requires bash 4, though
declare -A magic_variable=()
function grep_search() {
magic_variable[$1]=$( ls | tail -1 )
echo ${magic_variable[$1]}
}
If you can't use associative arrays (e.g., you must support bash 3), you can use declare to create dynamic variable names:
declare "magic_variable_$1=$(ls | tail -1)"
and use indirect parameter expansion to access the value.
var="magic_variable_$1"
echo "${!var}"
See BashFAQ: Indirection - Evaluating indirect/reference variables.
Beyond associative arrays, there are several ways of achieving dynamic variables in Bash. Note that all these techniques present risks, which are discussed at the end of this answer.
In the following examples I will assume that i=37 and that you want to alias the variable named var_37 whose initial value is lolilol.
Method 1. Using a “pointer” variable
You can simply store the name of the variable in an indirection variable, not unlike a C pointer. Bash then has a syntax for reading the aliased variable: ${!name} expands to the value of the variable whose name is the value of the variable name. You can think of it as a two-stage expansion: ${!name} expands to $var_37, which expands to lolilol.
name="var_$i"
echo "$name" # outputs “var_37”
echo "${!name}" # outputs “lolilol”
echo "${!name%lol}" # outputs “loli”
# etc.
Unfortunately, there is no counterpart syntax for modifying the aliased variable. Instead, you can achieve assignment with one of the following tricks.
1a. Assigning with eval
eval is evil, but is also the simplest and most portable way of achieving our goal. You have to carefully escape the right-hand side of the assignment, as it will be evaluated twice. An easy and systematic way of doing this is to evaluate the right-hand side beforehand (or to use printf %q).
And you should check manually that the left-hand side is a valid variable name, or a name with index (what if it was evil_code # ?). By contrast, all other methods below enforce it automatically.
# check that name is a valid variable name:
# note: this code does not support variable_name[index]
shopt -s globasciiranges
[[ "$name" == [a-zA-Z_]*([a-zA-Z_0-9]) ]] || exit
value='babibab'
eval "$name"='$value' # carefully escape the right-hand side!
echo "$var_37" # outputs “babibab”
Downsides:
does not check the validity of the variable name.
eval is evil.
eval is evil.
eval is evil.
1b. Assigning with read
The read builtin lets you assign values to a variable of which you give the name, a fact which can be exploited in conjunction with here-strings:
IFS= read -r -d '' "$name" <<< 'babibab'
echo "$var_37" # outputs “babibab\n”
The IFS part and the option -r make sure that the value is assigned as-is, while the option -d '' allows to assign multi-line values. Because of this last option, the command returns with an non-zero exit code.
Note that, since we are using a here-string, a newline character is appended to the value.
Downsides:
somewhat obscure;
returns with a non-zero exit code;
appends a newline to the value.
1c. Assigning with printf
Since Bash 3.1 (released 2005), the printf builtin can also assign its result to a variable whose name is given. By contrast with the previous solutions, it just works, no extra effort is needed to escape things, to prevent splitting and so on.
printf -v "$name" '%s' 'babibab'
echo "$var_37" # outputs “babibab”
Downsides:
Less portable (but, well).
Method 2. Using a “reference” variable
Since Bash 4.3 (released 2014), the declare builtin has an option -n for creating a variable which is a “name reference” to another variable, much like C++ references. Just as in Method 1, the reference stores the name of the aliased variable, but each time the reference is accessed (either for reading or assigning), Bash automatically resolves the indirection.
In addition, Bash has a special and very confusing syntax for getting the value of the reference itself, judge by yourself: ${!ref}.
declare -n ref="var_$i"
echo "${!ref}" # outputs “var_37”
echo "$ref" # outputs “lolilol”
ref='babibab'
echo "$var_37" # outputs “babibab”
This does not avoid the pitfalls explained below, but at least it makes the syntax straightforward.
Downsides:
Not portable.
Risks
All these aliasing techniques present several risks. The first one is executing arbitrary code each time you resolve the indirection (either for reading or for assigning). Indeed, instead of a scalar variable name, like var_37, you may as well alias an array subscript, like arr[42]. But Bash evaluates the contents of the square brackets each time it is needed, so aliasing arr[$(do_evil)] will have unexpected effects… As a consequence, only use these techniques when you control the provenance of the alias.
function guillemots {
declare -n var="$1"
var="«${var}»"
}
arr=( aaa bbb ccc )
guillemots 'arr[1]' # modifies the second cell of the array, as expected
guillemots 'arr[$(date>>date.out)1]' # writes twice into date.out
# (once when expanding var, once when assigning to it)
The second risk is creating a cyclic alias. As Bash variables are identified by their name and not by their scope, you may inadvertently create an alias to itself (while thinking it would alias a variable from an enclosing scope). This may happen in particular when using common variable names (like var). As a consequence, only use these techniques when you control the name of the aliased variable.
function guillemots {
# var is intended to be local to the function,
# aliasing a variable which comes from outside
declare -n var="$1"
var="«${var}»"
}
var='lolilol'
guillemots var # Bash warnings: “var: circular name reference”
echo "$var" # outputs anything!
Source:
BashFaq/006: How can I use variable variables (indirect variables, pointers, references) or associative arrays?
BashFAQ/048: eval command and security issues
Example below returns value of $name_of_var
var=name_of_var
echo $(eval echo "\$$var")
Use declare
There is no need on using prefixes like on other answers, neither arrays. Use just declare, double quotes, and parameter expansion.
I often use the following trick to parse argument lists contanining one to n arguments formatted as key=value otherkey=othervalue etc=etc, Like:
# brace expansion just to exemplify
for variable in {one=foo,two=bar,ninja=tip}
do
declare "${variable%=*}=${variable#*=}"
done
echo $one $two $ninja
# foo bar tip
But expanding the argv list like
for v in "$#"; do declare "${v%=*}=${v#*=}"; done
Extra tips
# parse argv's leading key=value parameters
for v in "$#"; do
case "$v" in ?*=?*) declare "${v%=*}=${v#*=}";; *) break;; esac
done
# consume argv's leading key=value parameters
while test $# -gt 0; do
case "$1" in ?*=?*) declare "${1%=*}=${1#*=}";; *) break;; esac
shift
done
Combining two highly rated answers here into a complete example that is hopefully useful and self-explanatory:
#!/bin/bash
intro="You know what,"
pet1="cat"
pet2="chicken"
pet3="cow"
pet4="dog"
pet5="pig"
# Setting and reading dynamic variables
for i in {1..5}; do
pet="pet$i"
declare "sentence$i=$intro I have a pet ${!pet} at home"
done
# Just reading dynamic variables
for i in {1..5}; do
sentence="sentence$i"
echo "${!sentence}"
done
echo
echo "Again, but reading regular variables:"
echo $sentence1
echo $sentence2
echo $sentence3
echo $sentence4
echo $sentence5
Output:
You know what, I have a pet cat at home
You know what, I have a pet chicken at home
You know what, I have a pet cow at home
You know what, I have a pet dog at home
You know what, I have a pet pig at home
Again, but reading regular variables:
You know what, I have a pet cat at home
You know what, I have a pet chicken at home
You know what, I have a pet cow at home
You know what, I have a pet dog at home
You know what, I have a pet pig at home
This will work too
my_country_code="green"
x="country"
eval z='$'my_"$x"_code
echo $z ## o/p: green
In your case
eval final_val='$'magic_way_to_define_magic_variable_"$1"
echo $final_val
This should work:
function grep_search() {
declare magic_variable_$1="$(ls | tail -1)"
echo "$(tmpvar=magic_variable_$1 && echo ${!tmpvar})"
}
grep_search var # calling grep_search with argument "var"
An extra method that doesn't rely on which shell/bash version you have is by using envsubst. For example:
newvar=$(echo '$magic_variable_'"${dynamic_part}" | envsubst)
For zsh (newers mac os versions), you should use
real_var="holaaaa"
aux_var="real_var"
echo ${(P)aux_var}
holaaaa
Instead of "!"
As per BashFAQ/006, you can use read with here string syntax for assigning indirect variables:
function grep_search() {
read "$1" <<<$(ls | tail -1);
}
Usage:
$ grep_search open_box
$ echo $open_box
stack-overflow.txt
Even though it's an old question, I still had some hard time with fetching dynamic variables names, while avoiding the eval (evil) command.
Solved it with declare -n which creates a reference to a dynamic value, this is especially useful in CI/CD processes, where the required secret names of the CI/CD service are not known until runtime. Here's how:
# Bash v4.3+
# -----------------------------------------------------------
# Secerts in CI/CD service, injected as environment variables
# AWS_ACCESS_KEY_ID_DEV, AWS_SECRET_ACCESS_KEY_DEV
# AWS_ACCESS_KEY_ID_STG, AWS_SECRET_ACCESS_KEY_STG
# -----------------------------------------------------------
# Environment variables injected by CI/CD service
# BRANCH_NAME="DEV"
# -----------------------------------------------------------
declare -n _AWS_ACCESS_KEY_ID_REF=AWS_ACCESS_KEY_ID_${BRANCH_NAME}
declare -n _AWS_SECRET_ACCESS_KEY_REF=AWS_SECRET_ACCESS_KEY_${BRANCH_NAME}
export AWS_ACCESS_KEY_ID=${_AWS_ACCESS_KEY_ID_REF}
export AWS_SECRET_ACCESS_KEY=${_AWS_SECRET_ACCESS_KEY_REF}
echo $AWS_ACCESS_KEY_ID $AWS_SECRET_ACCESS_KEY
aws s3 ls
Wow, most of the syntax is horrible! Here is one solution with some simpler syntax if you need to indirectly reference arrays:
#!/bin/bash
foo_1=(fff ddd) ;
foo_2=(ggg ccc) ;
for i in 1 2 ;
do
eval mine=( \${foo_$i[#]} ) ;
echo ${mine[#]}" " ;
done ;
For simpler use cases I recommend the syntax described in the Advanced Bash-Scripting Guide.
KISS approach:
a=1
c="bam"
let "$c$a"=4
echo $bam1
results in 4
I want to be able to create a variable name containing the first argument of the command
script.sh file:
#!/usr/bin/env bash
function grep_search() {
eval $1=$(ls | tail -1)
}
Test:
$ source script.sh
$ grep_search open_box
$ echo $open_box
script.sh
As per help eval:
Execute arguments as a shell command.
You may also use Bash ${!var} indirect expansion, as already mentioned, however it doesn't support retrieving of array indices.
For further read or examples, check BashFAQ/006 about Indirection.
We are not aware of any trick that can duplicate that functionality in POSIX or Bourne shells without eval, which can be difficult to do securely. So, consider this a use at your own risk hack.
However, you should re-consider using indirection as per the following notes.
Normally, in bash scripting, you won't need indirect references at all. Generally, people look at this for a solution when they don't understand or know about Bash Arrays or haven't fully considered other Bash features such as functions.
Putting variable names or any other bash syntax inside parameters is frequently done incorrectly and in inappropriate situations to solve problems that have better solutions. It violates the separation between code and data, and as such puts you on a slippery slope toward bugs and security issues. Indirection can make your code less transparent and harder to follow.
For indexed arrays, you can reference them like so:
foo=(a b c)
bar=(d e f)
for arr_var in 'foo' 'bar'; do
declare -a 'arr=("${'"$arr_var"'[#]}")'
# do something with $arr
echo "\$$arr_var contains:"
for char in "${arr[#]}"; do
echo "$char"
done
done
Associative arrays can be referenced similarly but need the -A switch on declare instead of -a.
POSIX compliant answer
For this solution you'll need to have r/w permissions to the /tmp folder.
We create a temporary file holding our variables and leverage the -a flag of the set built-in:
$ man set
...
-a Each variable or function that is created or modified is given the export attribute and marked for export to the environment of subsequent commands.
Therefore, if we create a file holding our dynamic variables, we can use set to bring them to life inside our script.
The implementation
#!/bin/sh
# Give the temp file a unique name so you don't mess with any other files in there
ENV_FILE="/tmp/$(date +%s)"
MY_KEY=foo
MY_VALUE=bar
echo "$MY_KEY=$MY_VALUE" >> "$ENV_FILE"
# Now that our env file is created and populated, we can use "set"
set -a; . "$ENV_FILE"; set +a
rm "$ENV_FILE"
echo "$foo"
# Output is "bar" (without quotes)
Explaining the steps above:
# Enables the -a behavior
set -a
# Sources the env file
. "$ENV_FILE"
# Disables the -a behavior
set +a
While I think declare -n is still the best way to do it there is another way nobody mentioned it, very useful in CI/CD
function dynamic(){
export a_$1="bla"
}
dynamic 2
echo $a_2
This function will not support spaces so dynamic "2 3" will return an error.
for varname=$prefix_suffix format, just use:
varname=${prefix}_suffix
I am confused about a bash script.
I have the following code:
function grep_search() {
magic_way_to_define_magic_variable_$1=`ls | tail -1`
echo $magic_variable_$1
}
I want to be able to create a variable name containing the first argument of the command and bearing the value of e.g. the last line of ls.
So to illustrate what I want:
$ ls | tail -1
stack-overflow.txt
$ grep_search() open_box
stack-overflow.txt
So, how should I define/declare $magic_way_to_define_magic_variable_$1 and how should I call it within the script?
I have tried eval, ${...}, \$${...}, but I am still confused.
I've been looking for better way of doing it recently. Associative array sounded like overkill for me. Look what I found:
suffix=bzz
declare prefix_$suffix=mystr
...and then...
varname=prefix_$suffix
echo ${!varname}
From the docs:
The ‘$’ character introduces parameter expansion, command substitution, or arithmetic expansion. ...
The basic form of parameter expansion is ${parameter}. The value of parameter is substituted. ...
If the first character of parameter is an exclamation point (!), and parameter is not a nameref, it introduces a level of indirection. Bash uses the value formed by expanding the rest of parameter as the new parameter; this is then expanded and that value is used in the rest of the expansion, rather than the expansion of the original parameter. This is known as indirect expansion. The value is subject to tilde expansion, parameter expansion, command substitution, and arithmetic expansion. ...
Use an associative array, with command names as keys.
# Requires bash 4, though
declare -A magic_variable=()
function grep_search() {
magic_variable[$1]=$( ls | tail -1 )
echo ${magic_variable[$1]}
}
If you can't use associative arrays (e.g., you must support bash 3), you can use declare to create dynamic variable names:
declare "magic_variable_$1=$(ls | tail -1)"
and use indirect parameter expansion to access the value.
var="magic_variable_$1"
echo "${!var}"
See BashFAQ: Indirection - Evaluating indirect/reference variables.
Beyond associative arrays, there are several ways of achieving dynamic variables in Bash. Note that all these techniques present risks, which are discussed at the end of this answer.
In the following examples I will assume that i=37 and that you want to alias the variable named var_37 whose initial value is lolilol.
Method 1. Using a “pointer” variable
You can simply store the name of the variable in an indirection variable, not unlike a C pointer. Bash then has a syntax for reading the aliased variable: ${!name} expands to the value of the variable whose name is the value of the variable name. You can think of it as a two-stage expansion: ${!name} expands to $var_37, which expands to lolilol.
name="var_$i"
echo "$name" # outputs “var_37”
echo "${!name}" # outputs “lolilol”
echo "${!name%lol}" # outputs “loli”
# etc.
Unfortunately, there is no counterpart syntax for modifying the aliased variable. Instead, you can achieve assignment with one of the following tricks.
1a. Assigning with eval
eval is evil, but is also the simplest and most portable way of achieving our goal. You have to carefully escape the right-hand side of the assignment, as it will be evaluated twice. An easy and systematic way of doing this is to evaluate the right-hand side beforehand (or to use printf %q).
And you should check manually that the left-hand side is a valid variable name, or a name with index (what if it was evil_code # ?). By contrast, all other methods below enforce it automatically.
# check that name is a valid variable name:
# note: this code does not support variable_name[index]
shopt -s globasciiranges
[[ "$name" == [a-zA-Z_]*([a-zA-Z_0-9]) ]] || exit
value='babibab'
eval "$name"='$value' # carefully escape the right-hand side!
echo "$var_37" # outputs “babibab”
Downsides:
does not check the validity of the variable name.
eval is evil.
eval is evil.
eval is evil.
1b. Assigning with read
The read builtin lets you assign values to a variable of which you give the name, a fact which can be exploited in conjunction with here-strings:
IFS= read -r -d '' "$name" <<< 'babibab'
echo "$var_37" # outputs “babibab\n”
The IFS part and the option -r make sure that the value is assigned as-is, while the option -d '' allows to assign multi-line values. Because of this last option, the command returns with an non-zero exit code.
Note that, since we are using a here-string, a newline character is appended to the value.
Downsides:
somewhat obscure;
returns with a non-zero exit code;
appends a newline to the value.
1c. Assigning with printf
Since Bash 3.1 (released 2005), the printf builtin can also assign its result to a variable whose name is given. By contrast with the previous solutions, it just works, no extra effort is needed to escape things, to prevent splitting and so on.
printf -v "$name" '%s' 'babibab'
echo "$var_37" # outputs “babibab”
Downsides:
Less portable (but, well).
Method 2. Using a “reference” variable
Since Bash 4.3 (released 2014), the declare builtin has an option -n for creating a variable which is a “name reference” to another variable, much like C++ references. Just as in Method 1, the reference stores the name of the aliased variable, but each time the reference is accessed (either for reading or assigning), Bash automatically resolves the indirection.
In addition, Bash has a special and very confusing syntax for getting the value of the reference itself, judge by yourself: ${!ref}.
declare -n ref="var_$i"
echo "${!ref}" # outputs “var_37”
echo "$ref" # outputs “lolilol”
ref='babibab'
echo "$var_37" # outputs “babibab”
This does not avoid the pitfalls explained below, but at least it makes the syntax straightforward.
Downsides:
Not portable.
Risks
All these aliasing techniques present several risks. The first one is executing arbitrary code each time you resolve the indirection (either for reading or for assigning). Indeed, instead of a scalar variable name, like var_37, you may as well alias an array subscript, like arr[42]. But Bash evaluates the contents of the square brackets each time it is needed, so aliasing arr[$(do_evil)] will have unexpected effects… As a consequence, only use these techniques when you control the provenance of the alias.
function guillemots {
declare -n var="$1"
var="«${var}»"
}
arr=( aaa bbb ccc )
guillemots 'arr[1]' # modifies the second cell of the array, as expected
guillemots 'arr[$(date>>date.out)1]' # writes twice into date.out
# (once when expanding var, once when assigning to it)
The second risk is creating a cyclic alias. As Bash variables are identified by their name and not by their scope, you may inadvertently create an alias to itself (while thinking it would alias a variable from an enclosing scope). This may happen in particular when using common variable names (like var). As a consequence, only use these techniques when you control the name of the aliased variable.
function guillemots {
# var is intended to be local to the function,
# aliasing a variable which comes from outside
declare -n var="$1"
var="«${var}»"
}
var='lolilol'
guillemots var # Bash warnings: “var: circular name reference”
echo "$var" # outputs anything!
Source:
BashFaq/006: How can I use variable variables (indirect variables, pointers, references) or associative arrays?
BashFAQ/048: eval command and security issues
Example below returns value of $name_of_var
var=name_of_var
echo $(eval echo "\$$var")
Use declare
There is no need on using prefixes like on other answers, neither arrays. Use just declare, double quotes, and parameter expansion.
I often use the following trick to parse argument lists contanining one to n arguments formatted as key=value otherkey=othervalue etc=etc, Like:
# brace expansion just to exemplify
for variable in {one=foo,two=bar,ninja=tip}
do
declare "${variable%=*}=${variable#*=}"
done
echo $one $two $ninja
# foo bar tip
But expanding the argv list like
for v in "$#"; do declare "${v%=*}=${v#*=}"; done
Extra tips
# parse argv's leading key=value parameters
for v in "$#"; do
case "$v" in ?*=?*) declare "${v%=*}=${v#*=}";; *) break;; esac
done
# consume argv's leading key=value parameters
while test $# -gt 0; do
case "$1" in ?*=?*) declare "${1%=*}=${1#*=}";; *) break;; esac
shift
done
Combining two highly rated answers here into a complete example that is hopefully useful and self-explanatory:
#!/bin/bash
intro="You know what,"
pet1="cat"
pet2="chicken"
pet3="cow"
pet4="dog"
pet5="pig"
# Setting and reading dynamic variables
for i in {1..5}; do
pet="pet$i"
declare "sentence$i=$intro I have a pet ${!pet} at home"
done
# Just reading dynamic variables
for i in {1..5}; do
sentence="sentence$i"
echo "${!sentence}"
done
echo
echo "Again, but reading regular variables:"
echo $sentence1
echo $sentence2
echo $sentence3
echo $sentence4
echo $sentence5
Output:
You know what, I have a pet cat at home
You know what, I have a pet chicken at home
You know what, I have a pet cow at home
You know what, I have a pet dog at home
You know what, I have a pet pig at home
Again, but reading regular variables:
You know what, I have a pet cat at home
You know what, I have a pet chicken at home
You know what, I have a pet cow at home
You know what, I have a pet dog at home
You know what, I have a pet pig at home
This will work too
my_country_code="green"
x="country"
eval z='$'my_"$x"_code
echo $z ## o/p: green
In your case
eval final_val='$'magic_way_to_define_magic_variable_"$1"
echo $final_val
This should work:
function grep_search() {
declare magic_variable_$1="$(ls | tail -1)"
echo "$(tmpvar=magic_variable_$1 && echo ${!tmpvar})"
}
grep_search var # calling grep_search with argument "var"
An extra method that doesn't rely on which shell/bash version you have is by using envsubst. For example:
newvar=$(echo '$magic_variable_'"${dynamic_part}" | envsubst)
For zsh (newers mac os versions), you should use
real_var="holaaaa"
aux_var="real_var"
echo ${(P)aux_var}
holaaaa
Instead of "!"
As per BashFAQ/006, you can use read with here string syntax for assigning indirect variables:
function grep_search() {
read "$1" <<<$(ls | tail -1);
}
Usage:
$ grep_search open_box
$ echo $open_box
stack-overflow.txt
Even though it's an old question, I still had some hard time with fetching dynamic variables names, while avoiding the eval (evil) command.
Solved it with declare -n which creates a reference to a dynamic value, this is especially useful in CI/CD processes, where the required secret names of the CI/CD service are not known until runtime. Here's how:
# Bash v4.3+
# -----------------------------------------------------------
# Secerts in CI/CD service, injected as environment variables
# AWS_ACCESS_KEY_ID_DEV, AWS_SECRET_ACCESS_KEY_DEV
# AWS_ACCESS_KEY_ID_STG, AWS_SECRET_ACCESS_KEY_STG
# -----------------------------------------------------------
# Environment variables injected by CI/CD service
# BRANCH_NAME="DEV"
# -----------------------------------------------------------
declare -n _AWS_ACCESS_KEY_ID_REF=AWS_ACCESS_KEY_ID_${BRANCH_NAME}
declare -n _AWS_SECRET_ACCESS_KEY_REF=AWS_SECRET_ACCESS_KEY_${BRANCH_NAME}
export AWS_ACCESS_KEY_ID=${_AWS_ACCESS_KEY_ID_REF}
export AWS_SECRET_ACCESS_KEY=${_AWS_SECRET_ACCESS_KEY_REF}
echo $AWS_ACCESS_KEY_ID $AWS_SECRET_ACCESS_KEY
aws s3 ls
Wow, most of the syntax is horrible! Here is one solution with some simpler syntax if you need to indirectly reference arrays:
#!/bin/bash
foo_1=(fff ddd) ;
foo_2=(ggg ccc) ;
for i in 1 2 ;
do
eval mine=( \${foo_$i[#]} ) ;
echo ${mine[#]}" " ;
done ;
For simpler use cases I recommend the syntax described in the Advanced Bash-Scripting Guide.
KISS approach:
a=1
c="bam"
let "$c$a"=4
echo $bam1
results in 4
I want to be able to create a variable name containing the first argument of the command
script.sh file:
#!/usr/bin/env bash
function grep_search() {
eval $1=$(ls | tail -1)
}
Test:
$ source script.sh
$ grep_search open_box
$ echo $open_box
script.sh
As per help eval:
Execute arguments as a shell command.
You may also use Bash ${!var} indirect expansion, as already mentioned, however it doesn't support retrieving of array indices.
For further read or examples, check BashFAQ/006 about Indirection.
We are not aware of any trick that can duplicate that functionality in POSIX or Bourne shells without eval, which can be difficult to do securely. So, consider this a use at your own risk hack.
However, you should re-consider using indirection as per the following notes.
Normally, in bash scripting, you won't need indirect references at all. Generally, people look at this for a solution when they don't understand or know about Bash Arrays or haven't fully considered other Bash features such as functions.
Putting variable names or any other bash syntax inside parameters is frequently done incorrectly and in inappropriate situations to solve problems that have better solutions. It violates the separation between code and data, and as such puts you on a slippery slope toward bugs and security issues. Indirection can make your code less transparent and harder to follow.
For indexed arrays, you can reference them like so:
foo=(a b c)
bar=(d e f)
for arr_var in 'foo' 'bar'; do
declare -a 'arr=("${'"$arr_var"'[#]}")'
# do something with $arr
echo "\$$arr_var contains:"
for char in "${arr[#]}"; do
echo "$char"
done
done
Associative arrays can be referenced similarly but need the -A switch on declare instead of -a.
POSIX compliant answer
For this solution you'll need to have r/w permissions to the /tmp folder.
We create a temporary file holding our variables and leverage the -a flag of the set built-in:
$ man set
...
-a Each variable or function that is created or modified is given the export attribute and marked for export to the environment of subsequent commands.
Therefore, if we create a file holding our dynamic variables, we can use set to bring them to life inside our script.
The implementation
#!/bin/sh
# Give the temp file a unique name so you don't mess with any other files in there
ENV_FILE="/tmp/$(date +%s)"
MY_KEY=foo
MY_VALUE=bar
echo "$MY_KEY=$MY_VALUE" >> "$ENV_FILE"
# Now that our env file is created and populated, we can use "set"
set -a; . "$ENV_FILE"; set +a
rm "$ENV_FILE"
echo "$foo"
# Output is "bar" (without quotes)
Explaining the steps above:
# Enables the -a behavior
set -a
# Sources the env file
. "$ENV_FILE"
# Disables the -a behavior
set +a
While I think declare -n is still the best way to do it there is another way nobody mentioned it, very useful in CI/CD
function dynamic(){
export a_$1="bla"
}
dynamic 2
echo $a_2
This function will not support spaces so dynamic "2 3" will return an error.
for varname=$prefix_suffix format, just use:
varname=${prefix}_suffix
I am confused about a bash script.
I have the following code:
function grep_search() {
magic_way_to_define_magic_variable_$1=`ls | tail -1`
echo $magic_variable_$1
}
I want to be able to create a variable name containing the first argument of the command and bearing the value of e.g. the last line of ls.
So to illustrate what I want:
$ ls | tail -1
stack-overflow.txt
$ grep_search() open_box
stack-overflow.txt
So, how should I define/declare $magic_way_to_define_magic_variable_$1 and how should I call it within the script?
I have tried eval, ${...}, \$${...}, but I am still confused.
I've been looking for better way of doing it recently. Associative array sounded like overkill for me. Look what I found:
suffix=bzz
declare prefix_$suffix=mystr
...and then...
varname=prefix_$suffix
echo ${!varname}
From the docs:
The ‘$’ character introduces parameter expansion, command substitution, or arithmetic expansion. ...
The basic form of parameter expansion is ${parameter}. The value of parameter is substituted. ...
If the first character of parameter is an exclamation point (!), and parameter is not a nameref, it introduces a level of indirection. Bash uses the value formed by expanding the rest of parameter as the new parameter; this is then expanded and that value is used in the rest of the expansion, rather than the expansion of the original parameter. This is known as indirect expansion. The value is subject to tilde expansion, parameter expansion, command substitution, and arithmetic expansion. ...
Use an associative array, with command names as keys.
# Requires bash 4, though
declare -A magic_variable=()
function grep_search() {
magic_variable[$1]=$( ls | tail -1 )
echo ${magic_variable[$1]}
}
If you can't use associative arrays (e.g., you must support bash 3), you can use declare to create dynamic variable names:
declare "magic_variable_$1=$(ls | tail -1)"
and use indirect parameter expansion to access the value.
var="magic_variable_$1"
echo "${!var}"
See BashFAQ: Indirection - Evaluating indirect/reference variables.
Beyond associative arrays, there are several ways of achieving dynamic variables in Bash. Note that all these techniques present risks, which are discussed at the end of this answer.
In the following examples I will assume that i=37 and that you want to alias the variable named var_37 whose initial value is lolilol.
Method 1. Using a “pointer” variable
You can simply store the name of the variable in an indirection variable, not unlike a C pointer. Bash then has a syntax for reading the aliased variable: ${!name} expands to the value of the variable whose name is the value of the variable name. You can think of it as a two-stage expansion: ${!name} expands to $var_37, which expands to lolilol.
name="var_$i"
echo "$name" # outputs “var_37”
echo "${!name}" # outputs “lolilol”
echo "${!name%lol}" # outputs “loli”
# etc.
Unfortunately, there is no counterpart syntax for modifying the aliased variable. Instead, you can achieve assignment with one of the following tricks.
1a. Assigning with eval
eval is evil, but is also the simplest and most portable way of achieving our goal. You have to carefully escape the right-hand side of the assignment, as it will be evaluated twice. An easy and systematic way of doing this is to evaluate the right-hand side beforehand (or to use printf %q).
And you should check manually that the left-hand side is a valid variable name, or a name with index (what if it was evil_code # ?). By contrast, all other methods below enforce it automatically.
# check that name is a valid variable name:
# note: this code does not support variable_name[index]
shopt -s globasciiranges
[[ "$name" == [a-zA-Z_]*([a-zA-Z_0-9]) ]] || exit
value='babibab'
eval "$name"='$value' # carefully escape the right-hand side!
echo "$var_37" # outputs “babibab”
Downsides:
does not check the validity of the variable name.
eval is evil.
eval is evil.
eval is evil.
1b. Assigning with read
The read builtin lets you assign values to a variable of which you give the name, a fact which can be exploited in conjunction with here-strings:
IFS= read -r -d '' "$name" <<< 'babibab'
echo "$var_37" # outputs “babibab\n”
The IFS part and the option -r make sure that the value is assigned as-is, while the option -d '' allows to assign multi-line values. Because of this last option, the command returns with an non-zero exit code.
Note that, since we are using a here-string, a newline character is appended to the value.
Downsides:
somewhat obscure;
returns with a non-zero exit code;
appends a newline to the value.
1c. Assigning with printf
Since Bash 3.1 (released 2005), the printf builtin can also assign its result to a variable whose name is given. By contrast with the previous solutions, it just works, no extra effort is needed to escape things, to prevent splitting and so on.
printf -v "$name" '%s' 'babibab'
echo "$var_37" # outputs “babibab”
Downsides:
Less portable (but, well).
Method 2. Using a “reference” variable
Since Bash 4.3 (released 2014), the declare builtin has an option -n for creating a variable which is a “name reference” to another variable, much like C++ references. Just as in Method 1, the reference stores the name of the aliased variable, but each time the reference is accessed (either for reading or assigning), Bash automatically resolves the indirection.
In addition, Bash has a special and very confusing syntax for getting the value of the reference itself, judge by yourself: ${!ref}.
declare -n ref="var_$i"
echo "${!ref}" # outputs “var_37”
echo "$ref" # outputs “lolilol”
ref='babibab'
echo "$var_37" # outputs “babibab”
This does not avoid the pitfalls explained below, but at least it makes the syntax straightforward.
Downsides:
Not portable.
Risks
All these aliasing techniques present several risks. The first one is executing arbitrary code each time you resolve the indirection (either for reading or for assigning). Indeed, instead of a scalar variable name, like var_37, you may as well alias an array subscript, like arr[42]. But Bash evaluates the contents of the square brackets each time it is needed, so aliasing arr[$(do_evil)] will have unexpected effects… As a consequence, only use these techniques when you control the provenance of the alias.
function guillemots {
declare -n var="$1"
var="«${var}»"
}
arr=( aaa bbb ccc )
guillemots 'arr[1]' # modifies the second cell of the array, as expected
guillemots 'arr[$(date>>date.out)1]' # writes twice into date.out
# (once when expanding var, once when assigning to it)
The second risk is creating a cyclic alias. As Bash variables are identified by their name and not by their scope, you may inadvertently create an alias to itself (while thinking it would alias a variable from an enclosing scope). This may happen in particular when using common variable names (like var). As a consequence, only use these techniques when you control the name of the aliased variable.
function guillemots {
# var is intended to be local to the function,
# aliasing a variable which comes from outside
declare -n var="$1"
var="«${var}»"
}
var='lolilol'
guillemots var # Bash warnings: “var: circular name reference”
echo "$var" # outputs anything!
Source:
BashFaq/006: How can I use variable variables (indirect variables, pointers, references) or associative arrays?
BashFAQ/048: eval command and security issues
Example below returns value of $name_of_var
var=name_of_var
echo $(eval echo "\$$var")
Use declare
There is no need on using prefixes like on other answers, neither arrays. Use just declare, double quotes, and parameter expansion.
I often use the following trick to parse argument lists contanining one to n arguments formatted as key=value otherkey=othervalue etc=etc, Like:
# brace expansion just to exemplify
for variable in {one=foo,two=bar,ninja=tip}
do
declare "${variable%=*}=${variable#*=}"
done
echo $one $two $ninja
# foo bar tip
But expanding the argv list like
for v in "$#"; do declare "${v%=*}=${v#*=}"; done
Extra tips
# parse argv's leading key=value parameters
for v in "$#"; do
case "$v" in ?*=?*) declare "${v%=*}=${v#*=}";; *) break;; esac
done
# consume argv's leading key=value parameters
while test $# -gt 0; do
case "$1" in ?*=?*) declare "${1%=*}=${1#*=}";; *) break;; esac
shift
done
Combining two highly rated answers here into a complete example that is hopefully useful and self-explanatory:
#!/bin/bash
intro="You know what,"
pet1="cat"
pet2="chicken"
pet3="cow"
pet4="dog"
pet5="pig"
# Setting and reading dynamic variables
for i in {1..5}; do
pet="pet$i"
declare "sentence$i=$intro I have a pet ${!pet} at home"
done
# Just reading dynamic variables
for i in {1..5}; do
sentence="sentence$i"
echo "${!sentence}"
done
echo
echo "Again, but reading regular variables:"
echo $sentence1
echo $sentence2
echo $sentence3
echo $sentence4
echo $sentence5
Output:
You know what, I have a pet cat at home
You know what, I have a pet chicken at home
You know what, I have a pet cow at home
You know what, I have a pet dog at home
You know what, I have a pet pig at home
Again, but reading regular variables:
You know what, I have a pet cat at home
You know what, I have a pet chicken at home
You know what, I have a pet cow at home
You know what, I have a pet dog at home
You know what, I have a pet pig at home
This will work too
my_country_code="green"
x="country"
eval z='$'my_"$x"_code
echo $z ## o/p: green
In your case
eval final_val='$'magic_way_to_define_magic_variable_"$1"
echo $final_val
This should work:
function grep_search() {
declare magic_variable_$1="$(ls | tail -1)"
echo "$(tmpvar=magic_variable_$1 && echo ${!tmpvar})"
}
grep_search var # calling grep_search with argument "var"
An extra method that doesn't rely on which shell/bash version you have is by using envsubst. For example:
newvar=$(echo '$magic_variable_'"${dynamic_part}" | envsubst)
For zsh (newers mac os versions), you should use
real_var="holaaaa"
aux_var="real_var"
echo ${(P)aux_var}
holaaaa
Instead of "!"
As per BashFAQ/006, you can use read with here string syntax for assigning indirect variables:
function grep_search() {
read "$1" <<<$(ls | tail -1);
}
Usage:
$ grep_search open_box
$ echo $open_box
stack-overflow.txt
Even though it's an old question, I still had some hard time with fetching dynamic variables names, while avoiding the eval (evil) command.
Solved it with declare -n which creates a reference to a dynamic value, this is especially useful in CI/CD processes, where the required secret names of the CI/CD service are not known until runtime. Here's how:
# Bash v4.3+
# -----------------------------------------------------------
# Secerts in CI/CD service, injected as environment variables
# AWS_ACCESS_KEY_ID_DEV, AWS_SECRET_ACCESS_KEY_DEV
# AWS_ACCESS_KEY_ID_STG, AWS_SECRET_ACCESS_KEY_STG
# -----------------------------------------------------------
# Environment variables injected by CI/CD service
# BRANCH_NAME="DEV"
# -----------------------------------------------------------
declare -n _AWS_ACCESS_KEY_ID_REF=AWS_ACCESS_KEY_ID_${BRANCH_NAME}
declare -n _AWS_SECRET_ACCESS_KEY_REF=AWS_SECRET_ACCESS_KEY_${BRANCH_NAME}
export AWS_ACCESS_KEY_ID=${_AWS_ACCESS_KEY_ID_REF}
export AWS_SECRET_ACCESS_KEY=${_AWS_SECRET_ACCESS_KEY_REF}
echo $AWS_ACCESS_KEY_ID $AWS_SECRET_ACCESS_KEY
aws s3 ls
Wow, most of the syntax is horrible! Here is one solution with some simpler syntax if you need to indirectly reference arrays:
#!/bin/bash
foo_1=(fff ddd) ;
foo_2=(ggg ccc) ;
for i in 1 2 ;
do
eval mine=( \${foo_$i[#]} ) ;
echo ${mine[#]}" " ;
done ;
For simpler use cases I recommend the syntax described in the Advanced Bash-Scripting Guide.
KISS approach:
a=1
c="bam"
let "$c$a"=4
echo $bam1
results in 4
I want to be able to create a variable name containing the first argument of the command
script.sh file:
#!/usr/bin/env bash
function grep_search() {
eval $1=$(ls | tail -1)
}
Test:
$ source script.sh
$ grep_search open_box
$ echo $open_box
script.sh
As per help eval:
Execute arguments as a shell command.
You may also use Bash ${!var} indirect expansion, as already mentioned, however it doesn't support retrieving of array indices.
For further read or examples, check BashFAQ/006 about Indirection.
We are not aware of any trick that can duplicate that functionality in POSIX or Bourne shells without eval, which can be difficult to do securely. So, consider this a use at your own risk hack.
However, you should re-consider using indirection as per the following notes.
Normally, in bash scripting, you won't need indirect references at all. Generally, people look at this for a solution when they don't understand or know about Bash Arrays or haven't fully considered other Bash features such as functions.
Putting variable names or any other bash syntax inside parameters is frequently done incorrectly and in inappropriate situations to solve problems that have better solutions. It violates the separation between code and data, and as such puts you on a slippery slope toward bugs and security issues. Indirection can make your code less transparent and harder to follow.
For indexed arrays, you can reference them like so:
foo=(a b c)
bar=(d e f)
for arr_var in 'foo' 'bar'; do
declare -a 'arr=("${'"$arr_var"'[#]}")'
# do something with $arr
echo "\$$arr_var contains:"
for char in "${arr[#]}"; do
echo "$char"
done
done
Associative arrays can be referenced similarly but need the -A switch on declare instead of -a.
POSIX compliant answer
For this solution you'll need to have r/w permissions to the /tmp folder.
We create a temporary file holding our variables and leverage the -a flag of the set built-in:
$ man set
...
-a Each variable or function that is created or modified is given the export attribute and marked for export to the environment of subsequent commands.
Therefore, if we create a file holding our dynamic variables, we can use set to bring them to life inside our script.
The implementation
#!/bin/sh
# Give the temp file a unique name so you don't mess with any other files in there
ENV_FILE="/tmp/$(date +%s)"
MY_KEY=foo
MY_VALUE=bar
echo "$MY_KEY=$MY_VALUE" >> "$ENV_FILE"
# Now that our env file is created and populated, we can use "set"
set -a; . "$ENV_FILE"; set +a
rm "$ENV_FILE"
echo "$foo"
# Output is "bar" (without quotes)
Explaining the steps above:
# Enables the -a behavior
set -a
# Sources the env file
. "$ENV_FILE"
# Disables the -a behavior
set +a
While I think declare -n is still the best way to do it there is another way nobody mentioned it, very useful in CI/CD
function dynamic(){
export a_$1="bla"
}
dynamic 2
echo $a_2
This function will not support spaces so dynamic "2 3" will return an error.
for varname=$prefix_suffix format, just use:
varname=${prefix}_suffix
What I have is this:
progname=${0%.*}
progname=${progname##*/}
Can this be nested (or not) into one line, i.e. a single expression?
I'm trying to strip the path and extension off of a script name so that only the base name is left. The above two lines work fine. My 'C' nature is simply driving me to obfuscate these even more.
Bash supports indirect expansion:
$ FOO_BAR="foobar"
$ foo=FOO
$ foobar=${foo}_BAR
$ echo ${foobar}
FOO_BAR
$ echo ${!foobar}
foobar
This should support the nesting you are looking for.
If by nest, you mean something like this:
#!/bin/bash
export HELLO="HELLO"
export HELLOWORLD="Hello, world!"
echo ${${HELLO}WORLD}
Then no, you can't nest ${var} expressions. The bash syntax expander won't understand it.
However, if I understand your problem right, you might look at using the basename command - it strips the path from a given filename, and if given the extension, will strip that also. For example, running basename /some/path/to/script.sh .sh will return script.
The following option has worked for me:
NAME="par1-par2-par3"
echo $(TMP=${NAME%-*};echo ${TMP##*-})
Output is:
par2
An old thread but perhaps the answer is the use of Indirection:${!PARAMETER}
For e.g., consider the following lines:
H="abc"
PARAM="H"
echo ${!PARAM} #gives abc
This nesting does not appear to be possible in bash, but it works in zsh:
progname=${${0%.*}##*/}
Expressions like ${${a}} do not work. To work around it, you can use eval:
b=value
a=b
eval aval=\$$a
echo $aval
Output is
value
Actually it is possible to create nested variables in bash, using two steps.
Here is a test script based upon the post by Tim, using the idea suggested by user1956358.
#!/bin/bash
export HELLO="HELLO"
export HELLOWORLD="Hello, world!"
# This command does not work properly in bash
echo ${${HELLO}WORLD}
# However, a two-step process does work
export TEMP=${HELLO}WORLD
echo ${!TEMP}
The output is:
Hello, world!
There are lots of neat tricks explained by running 'info bash' from the command line, then searching for 'Shell Parameter Expansion'. I've been reading a few myself today, just lost about 20 minutes of my day, but my scripts are going to get a lot better...
Update: After more reading I suggest this alternative per your initial question.
progname=${0##*/}
It returns
bash
There is a 1 line solution to the OP's original question, the basename of a script with the file extension stripped:
progname=$(tmp=${0%.*} ; echo ${tmp##*/})
Here's another, but, using a cheat for basename:
progname=$(basename ${0%.*})
Other answers have wandered away from the OP's original question and focused on whether it's possible to just expand the result of expressions with ${!var} but came across the limitation that var must explicitly match an variable name. Having said that, there's nothing stopping you having a 1-liner answer if you chain the expressions together with a semicolon.
ANIMAL=CAT
BABYCAT=KITTEN
tmp=BABY${ANIMAL} ; ANSWER=${!tmp} # ANSWER=KITTEN
If you want to make this appear like a single statement, you can nest it in a subshell, i.e.
ANSWER=$( tmp=BABY${ANIMAL) ; echo ${!tmp} ) # ANSWER=KITTEN
An interesting usage is indirection works on arguments of a bash function. Then, you can nest your bash function calls to achieve multilevel nested indirection because we are allowed to do nested commands:
Here's a demonstration of indirection of an expression:
deref() { echo ${!1} ; }
ANIMAL=CAT
BABYCAT=KITTEN
deref BABY${ANIMAL} # Outputs: KITTEN
Here's a demonstration of multi level indirection thru nested commands:
deref() { echo ${!1} ; }
export AA=BB
export BB=CC
export CC=Hiya
deref AA # Outputs: BB
deref $(deref AA) # Outputs: CC
deref $(deref $(deref AA)) # Outputs: Hiya
As there is already a lot of answer there, I just want to present two different ways for doing both: nesting parameter expansion and variable name manipulation. (So you will find four different answer there:).
Parameter expansion not really nested, but done in one line:
Without semicolon (;) nor newline:
progname=${0%.*} progname=${progname##*/}
Another way: you could use a fork to basename
progname=$(basename ${0%.*})
This will make the job.
About concatenating variable name
If you want to construct varname, you could
use indirect expansion
foobar="baz"
varname="foo"
varname+="bar"
echo ${!varname}
baz
or use nameref
foobar="baz"
bar="foo"
declare -n reffoobar=${bar}bar
echo $reffoobar
baz
I know this is an ancient thread, but here are my 2 cents.
Here's an (admittedly kludgy) bash function which allows for the required functionality:
read_var() {
set | grep ^$1\\b | sed s/^$1=//
}
Here's a short test script:
#!/bin/bash
read_var() {
set | grep ^$1\\b | sed s/^$1=//
}
FOO=12
BAR=34
ABC_VAR=FOO
DEF_VAR=BAR
for a in ABC DEF; do
echo $a = $(read_var $(read_var ${a}_VAR))
done
The output is, as expected:
ABC = 12
DEF = 34
It will work if you follow the bellow shown way of taking on intermediate step :
export HELLO="HELLO"
export HELLOWORLD="Hello, world!"
varname=${HELLO}WORLD
echo ${!varname}
The basename bultin could help with this, since you're specifically splitting on / in one part:
user#host# var=/path/to/file.extension
user#host# basename ${var%%.*}
file
user#host#
It's not really faster than the two line variant, but it is just one line using built-in functionality. Or, use zsh/ksh which can do the pattern nesting thing. :)
Though this is a very old thread, this device is ideal for either directly or randomly selecting a file/directory for processing (playing tunes, picking a film to watch or book to read, etc).
In bash I believe it is generally true that you cannot directly nest any two expansions of the same type, but if you can separate them with some different kind of expansion, it can be done.
e=($(find . -maxdepth 1 -type d))
c=${2:-${e[$((RANDOM%${#e[#]}))]}}
Explanation: e is an array of directory names, c the selected directory, either named explicitly as $2,
${2:-...}
where ... is the alternative random selection given by
${e[$((RANDOM%${#e[#]}))]}
where the
$((RANDOM%...))
number generated by bash is divided by the number of items in array e, given by
${#e[#]}
yielding the remainder (from the % operator) that becomes the index to array e
${e[...]}
Thus you have four nested expansions.
If the motivation is to "obfuscate" (I would say streamline) array processing in the spirit of Python's "comprehensions", create a helper function that performs the operations in sequence.
function fixupnames()
{
pre=$1 ; suf=$2 ; shift ; shift ; args=($#)
args=(${args[#]/#/${pre}-})
args=(${args[#]/%/-${suf}})
echo ${args[#]}
}
You can use the result with a nice one-liner.
$ echo $(fixupnames a b abc def ghi)
a-abc-b a-def-b a-ghi-b
eval will allow you to do what you are wanting:
export HELLO="HELLO"
export HELLOWORLD="Hello, world!"
eval echo "\${${HELLO}WORLD}"
Output: Hello, world