I upgraded my Xcode SDK to version 10 last night and then find I cannot build.
I'm getting this error:
Build input file cannot be found:
'/Users/call01/Library/Developer/Xcode/DerivedData/Comp-Lite-Apps-gytvmossqptokeafrddvvmnlzadk/Build/Products/Debug-iphoneos/SG11.app/SG11
which did not exist before my upgrade and I'm tempted to revert back but would like to stick with version 10 if I can resolve this issue.
Try to switch back to the Legacy Build System (File > Project Settings > Workspace Settings > Legacy Build System)
For Swift files or files that belong to the project such as:
Build input file cannot be found: PATH/TO/FILE/FILE.swift
This issue can happen when files or folders have been removed or moved in the project.
To fix it:
Go in the project-navigator, select your project
Select Build Phasestab
In Compile Sources section, check for the file(s) that Xcode is complaining of
Notice that the file(s) have the wrong path, and delete them by clicking on the minus icon
Re-add the file(s) by clicking the plus icon and search in the project.
Product > Clean Build Folder
Build
You generally find these missing files in the Recovered References folder of Xcode in the project tree (look for the search bar at the bottom-left of Xcode and search for your complaining file):
Deleting them from this folder can also solve the error.
For me In Xcode 10, this solution worked like a charm. Just go to the Recovered References folder and remove all files in red color and add it again with proper reference.
If Recovered References folder was not found: Check for all missing files in the project (files in red colour) and try to add files references again.
Just check the path to .plist file in Build Settings of your target
Funnily, closing Xcode and reopening it might also be enough.
This worked for me in Xcode 10:
Click Project icon/name in your Xcode project
Go to General tab
Click [Choose info.plist File] under Identity section
Select the info.Plist file
Check Info tab to see if info.plist was loaded successfully
Build and run
This is an architecture problem. Do not change to legacy build system!
I got the same error, but what solved it for me was this:
The top says architectures in VALID_ARCHS are also excluded in EXCLUDED ARCHS. I was messing around with them to get a Swift Package to compile in Xcode 12, and have spent hours on this.
It would compile on the simulator and not on a device.
The Solution:
Go to Build Settings
Ensure "Architectures" contains 1 entry : $(ARCHS_STANDARD)
Ensure there is nothing in "Excluded Architectures"
Now scroll right to the bottom of Build Settings.
Make sure the VALID_ARCHS is exactly the same as this screenshot.
The arm stuff is $(ARCHS_STANDARD) again.
If VALID_ARCHS doesn't exist, add it with the + button.
Clean (cmd-shift-K)
Your project should now build perfect on both the simulator and device!
If it doesn't work, you need to make sure all these settings are the same both in your target build settings and the project build settings.
Note, if you have a Mac with Apple silicon, you may not need to do any of this.
The above solution eventually works for me; however, I need to do some more extra steps to finally make it to compile successfully. (These extra steps were required even on Xcode 9.)
Xcode: File -> Workspace Settings -> Build System: Legacy Build System
Xcode: Product -> Clean
Rotate to compile thru different emulator types, such as "iPhone 8", "iPhone 8 Plus", etc. (They might fail or might not.)
Eventually compile on "Generic iOS Device"
I fixed this issue this way: go to your project's Build Phases (click on project icon at the top, and then click on Build Phases). Search for your file there. If it's there (it'll be grayed out), delete it. Then clean (shift + alt + command + k), and run! Hope it helps.
If the error says it can't find Info.plist and it's looking in the wrong path, do the following:
Select your project from the navigator, then select your target
Select "Build Settings" and search "plist"
There should be an option called Info.plist File. Change the location to the correct one.
None of the above worked for me, but this did:
Open project in Finder, right click on your .xcodeproj file and show package contents
Open project.pbxproj in a text editor
Find the reference to your missing file
Edit path = "path/to/file.swift" to the actual location on disk and save the file.
Rebuild the project
In my case I had a build script that generated the .app binary (Buck).
The Buck build script ran in parallel with Swift Embed build step. Because the .app binary was not generated yet the Swift step would fail.
In my build script I added "$BUILD_PRODUCTS_DIR/$EXECUTABLE_PATH" under "Output Files".
This tells Xcode's New Build System that this script will output the app Binary and in turn Xcode will make sure to synchronize any build steps that depend on this artifact.
I ran into this error after renaming a file. Somehow Xcode didn't correctly rename the actual file on disk.
So it wasn't able to find the file. Sometimes the files gets highlights with a red text color. At other times the Swift icon in front of the file was getting a gray overlay.
The fix was simple.
Look into the error and see exactly which file it's unable to find.
Select the file that can't be found.
Go to the 'File Inspector'. It's on Xcode's right navigation pane.
Click on the folder icon.
Select the correct file.
Clean build and run it again.
Open the right navigation pane where your project files exist
OR JUST click on cmd + 1. Then search for "Recovered References" folder. Open it and delete all red files, then everything will work so fine.
I had this happen for building my unit tests. This may have happened because I deleted the example tests.
I removed the Unit test bundle then re-added it as shown in the pictures below and all was well again.
I had a similar issue after upgrading to a new swift version recently.
Moving files around caused my xcode project to reference items that were no longer in the project directory giving me the Error Code Build Input File Not Found.
In my situation I somehow had multiple files/images that were being referenced as described below:
In the image above.
Navigate to your Targets page.
Then Click on the Build Phases tab on the top.
Scroll Down to Copy Bundle Resources
Find the affected files and remove them. (hit delete on them or select them and hit the minus button )
It was in here that I somehow had multiple files and images that were being referenced from other folders and the build would fail as they could no longer find them. And I could not find them either! or how Xcode was still referencing them
I hope this helps someone else !
This worked for me
try deleting the red colored files
delete the files in derived data
clean the build folder
then try building by using "new build system" from file->workspace settings
I had the same issue. The problem was that I didn't have any file under the Target > Build Phases > Compile Sources. The problem was solved after I added at leas one file to Compile Sources.
Not that I did anything wrong, but I ran into this issue for a completely different reason and kinda know what caused this.
I previously used finder and dragged a file into my project's directory/folder. I didn't drag into Xcode. To make Xcode include that file into the project, I had to drag it into Xcode myself later again.
But when I switched to a new branch which didn't have that file (nor it needed to), Xcode was giving me this error:
Build input file cannot be found:
'/Users/honey/Documents/xp/xpios/powerup/Models
Extensions/CGSize+Extension.swift'
I did clean build folder and delete my derived data, but it didn't work until I restarted my Xcode.
In my case, the file (and the directory) that XCode was mentioning was incorrect, and the issue started occurring after a Git merge with a relatively huge branch. To fix the same, I did the following steps:
Searched for the file in the directory system of XCode.
Found the errored file highlighted in red (i.e, it was missing).
Right clicked on the file and removed the file.
I tried building my code again, and voila, it was successful.
I hope these steps help someone out.
What Xcode was complaining about was a XIB file I got it working by going to Project -> Build Phases -> Copy Bundle Resources, removing the "problematic" XIB, cleaning (CMD+Shift+K), building and adding it back again.
There is also one possibility that sometimes when you move your files to different folder and especially when you move your info.plist to other folder, you need to define the location of that file. To solve this problem, simply click on your project blue icon on the top, and you will see a button in place of project name and bundle id, click on it and locate the info.plist file there, clean and compile happily.
I ran into this problem soon after upgrading to Xcode 10, but that was not the issue.
I tried changing the build system, but that gave me a separate error that meant the same thing. Generally saying "File X can not be found".
There are multiple things to check when a file can not be found.
Recovered references Folder
Apple does this nice thing where if it detects a reference to a file that doesn't exists it will add this reference into a group called "Recovered References"
That is nice of Apple but it doesn't always work.
Build Phases Compile Sources
In this list, there could be meta data for a file that the project is suppose to compile, but the file does not actually exists and it's attempting to find the file at the given path. In this list it will be dimmed out, delete them and re-add them by toggling the file's target dependencies or manually removing it and dragging it in.
File's Path
Double check the file path that the error is printing out and the file path for the file in finder. You can easily see this by clicking on the file in Xcode and checking the "Show the file inspector" tab (the left most tab). If these paths are correct then you are good!
Dimmed out files in your project that are not in recovered references or red
This one pissed me off because it's not obvious about what happened, but basically if you go into finder and move a file to a different location with out updating the reference in the project it will throw the error as the file no longer exists there. The only indication I have found for that is that the file in the "Project Navigator" tab (left most tab) is very slightly dimmed, but when you go to delete this file Xcode doesn't prompt you to delete the reference or send to trash. You can fix this by deleting the file and re-adding it to the project or going to the "File Inspector" tab and click the folder icon next to the path and change it to the proper location.
Either way, the error indicates that it can't find a file, switching to the old build system is a bandaid for a more concrete issue. We as developers understand that a compiler just wants an artifact to be listed at the end of a file path. Somewhere the path is not correct! We have to find where that is!
My issue was resolved with item 4 listed above. Hope this helps somebody.
In my case I accidentally deleted one third-party xcodeproj folder I used in my app.
If you tried profiling, and then it didn't work, and now you cannot build, go into your Target pane (via the Project Icon), Switch to the Build Settings tab, search for PROFILE - and set CLANG_USE_OPTIMIZATION_PROFILE to "No".
In my case, I had created a new test target and deleted the default swift file so it was left with just the info.plist. Adding a new file fixed this.
The "Legacy Build System" solution didn't work for me. What worked it was:
Clean project and remove "DerivedData".
Remove input files not found from project (only references, don't delete files).
Build (=> will generate errors related to missing files).
Add files again to project.
Build (=> should SUCCEED).
I know that this is an old subject, but I found the issue with xcode 12.3 and was related to an error while doing the CopyPlist of the main.Storyboard during compilation.
Actually, changing the build settings to "Legacy Build Setting" worked, but it is deprecated, so I discarded it because is a short term solution.
Check this:
With that setting, worked for me. Before I had "Copy plist".
After struggling with this issue for about 45mins, here is a super easy solution that worked for me.
On the project explorer, click on the file/folder that is in red colour (means project is not able to locate the file)
Look at the details tab in the file inspector (generally to the right of the screen - see the attached screenshot)
Click on the folder icon and locate the real file/folder in your local machine.
That is it. This should do the trick. Basically help your xcode locate the directories and update the reference cache.
Random, for Cocoapods: I hadn't added my test target to my Podfile.
A partner and I are managing an Xcode project via Git. He recently "localized" the project, which added a directory for German ("de.lproj") to the project with a number of files. After I pulled those changes over to my copy of the project, Xcode now fails to compile complaining that two files in this directory don't exist. These files are present in the filesystem, but displayed as red (missing) in the Xcode sidebar.
Is there a way to force Xcode to rebuild it's internal catalog of files so that it can "rediscover" that these files are, indeed, present?
Note, I've tried a fresh "clone" of this Git project as well, same result.
I found a solution without removing the file from Xcode -
In the Project Navigator, locate the file (colored red for not being found) and highlight it.
Show the File Inspector
Under Location change Absolute Path to Relative to group or Relative to project,
Then next to the path, there's a little white icon, click it and choose the file's location.
This turned out to be a case of absolute vs. group paths memorized in the project.pbxproj file by Xcode. For reasons I do not understand, when my partner localized our project, some files were added to Xcode using absolute paths. When I pulled that version of the project, my copy of Xcode could not find those files because the absolute path did not match my absolute path. Even though the files were in the project and transferred properly by Git, Xcode could not find them.
My solution was to use Xcode to delete these files. Since these were localized files, I actually had to delete the "parent" version of the localized files. I told Xcode to only remove the references to the files. Then I dragged the files from Finder back into Xcode. This time Xcode inserted them as "relative to group" and all was well.
I committed and pushed those changes back to our remote Git repository. My partner was able to pull those to his copy and all worked for him too.
Neither of us understand why the files were inserted as absolute references in the first place, but at least we were able to use this workaround to make the project portable again.
I had this issue and i fixed it just by quitting xcode and reopening it. All the missing files magically reappeared. Hope this will help some one.
Check the project folder path. If any of the folder name in the path contains a 'space' then remove it and open the project again. I had this issue with Xcode 9.
I'd like to move my web dev editing to Xcode 4 (currently using textmate). I have a couple of simple questions that are clearly a lack of experience on my end.
In Xcode's Project Navigator, how do I add a folder to the shown directory tree? Currently, I add via terminal and do File -> Add Files
Is there any way to tell Xcode to see the file system as the file system and not as references?
a less likely thing:
Is there any way to bring up a console within the context of a folder in project navigator (would like to be able to run grep again small portion or something)?
thx
I can answer the first question. Adding a folder of files to a project is the same as adding individual files. Choose File > Add Files in Xcode. When you add a folder of files to a project, you should see something like the following screenshot:
Create groups if you need to access the files in Xcode, such as adding a folder of source code files. Create folder references if you don't need to access the files in Xcode, such as adding a folder of audio files.
You can also add folders to the project navigator by selecting a file or folder in the project navigator, right-clicking, and choosing New Group.
As far as I know, Xcode won't mirror the filesystem as an Xcode tree (anyone correct me id I'm wrong). Wanting to have an identical structure is quite some work. I use to first place the files hierarchically in the file-system, then I mimic the same structure in Xcode.
This requires some attention since Xcode 4.1 not always writes new classes to the place you told him to - they may prefer to land in the highest level of the Xcode project.
I had similar thoughts and started a thread, might be helpful for further reading
Your second question: sorry, can't help you there.
This is probably a very easy question, but I'm having trouble deleting resources from my XCode project. I added them using "Create Folder References for any added folders" so that I could import a whole offline HTML site with its correct folder structure.
Unfortunately, now it has been added like this I don't seem to be able to delete individual files in the structure (it's not available from the Edit menu).
Can anyone help please? Thanks!
That isn't how folder references work. The idea is that its only a reference, you can open files within it and save it from those editors, you can delete or move the entire reference throughout the xcode project, but you can't actually edit it - its read only as far as xcode is concerned. Likewise, you cannot restructure it (move internal files around).
I'm not to sure why apple decided to make this the case, but apparently they have.
If you want to know how one might use the xcode folder system, here's how I tend to use them with my projects:
Whenever I subdivide code into folders, when I drag them into my project I click "recursively create groups for any added folders". If you do this, you any changes you make within xcode will not reflect the actual file itself. As far as I know, there is no way to do this. What does happen then is that when you add a new code file to it, the directory starts off in that file by default. ie, you don't need to navigate to it manually when you create a new file.
I use folder references whenever I'm working with content for an application I'm using. This way, I add all my images, folders, configuration files, whatever - and xcode immediately lists them. The reason I have it within xcode, I can I copy the files into the executables directory by dragging the folder reference into a "Copy Files" build phase.
Thats basically (to my knowledge) how one uses the folder types within xcode - sadly, I don't know how to achieve the functionality you want. You may have to manually delete the folders in finder, which if you do use folder references will update xcode to the change.
I ran into the same issue by using "Create Folder References for any added folders". I wanted to change some of the times but that's not possible. I had added a main folder that had other directories under it. I just had to select the main directory and deleted it and then just add the subdirectories that I needed. You can't make any location or removal changes to the directories that are added this way. -- Jeff
In the project browser, where you're looking at files, right click and choose "Delete". It'll prompt you to either remove the file from the project (leaving the underlying file on the filesystem) or to also move the underlying file to the trash.
I ran into the same issue. Delete the files from the folder directly as opposed to from within Xcode. You'll see the entries turn red under your project. Restarting Xcode should make these red entries vanish.